Study guide
15.2 Inertial Reference, AHRS/ADIRU Context and GPS
EASA Part-66 Module 05 — Digital Techniques / Electronic Instrument Systems Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Numbering Systems
1.1 Numbering Systems: Decimal, Binary, Octal and Hexadecimal 1.2 Binary Arithmetic and Signed Number Representation 1.3 Binary Coded Decimal, Gray Code and Alphanumeric Codes
2 Chapter 2: Data Conversion
2.1 Analogue and Digital Signals, Sampling and Quantisation 2.2 Digital-to-Analogue Converters 2.3 Analogue-to-Digital Converters
3 Chapter 3: ARINC 429 Data Buses
3.1 ARINC 429 Specification, Physical Layer and Topology 3.2 ARINC 429 32-Bit Word Architecture 3.3 ARINC 429 Transmission, Timing and Troubleshooting
4 Chapter 4: Advanced Avionics Data Buses and Aircraft Ethernet
4.1 ARINC 629 Digital Autonomous Terminal Access 4.2 MIL-STD-1553B Military Avionics Data Bus 4.3 AFDX / ARINC 664 Part 7 Avionics Full-Duplex Switched Ethernet
5 Chapter 5: Combinational Logic Gates and Boolean Algebra
5.1 Basic Logic Gates, Truth Tables and Logic Levels 5.2 Boolean Algebra, De Morgan Theorems and Logic Simplification 5.3 Universal Gates and Aircraft Combinational Applications
6 Chapter 6: Sequential Logic, Registers and Logic Diagrams
6.1 Bistable Multivibrators: SR, JK, D and T Flip-Flops 6.2 Shift Registers and Data Storage Elements 6.3 Asynchronous and Synchronous Counters and Logic-Diagram Interpretation
7 Chapter 7: Computer Structure and Microprocessors
7.1 Computer Architecture, Terminology and the Bus System 7.2 Semiconductor Memory Technologies 7.3 Microprocessor Operation, Instruction Cycles and I/O
8 Chapter 8: Integrated Circuits, Multiplexing and Integrated Modular Avionics
8.1 Integrated Circuit Technology, Encoders, Decoders and Scale of Integration 8.2 Multiplexing and Demultiplexing Techniques 8.3 Remote Data Concentrators and Integrated Modular Avionics
9 Chapter 9: Fibre Optics in Aviation
9.1 Physics of Light Transmission and Optical Fibres 9.2 Fibre Cable Types, Signal Degradation and Optical Components 9.3 Fibre Optic Maintenance, Termination, Splicing and Inspection
10 Chapter 10: Electronic Displays and Flight Instrument Layout
10.1 Display Technologies: CRT, LED and LCD 10.2 Electronic Flight Instrument System Architecture 10.3 Cockpit Symbology, Colour Standards and Display Reversion
11 Chapter 11: Electrostatic Sensitive Devices
11.1 Physics of Electrostatic Charge and Device Susceptibility 11.2 ESDS Damage Mechanisms: Catastrophic versus Latent Failures 11.3 ESDS Handling, Storage, Packaging and Workshop Procedures
12 Chapter 12: Software Management Control and Airworthiness
12.1 Aviation Software Classification and RTCA DO-178C / EUROCAE ED-12C 12.2 Software Configuration Management and Part Numbering 12.3 Data Loading, Integrity Verification and Unapproved Changes
13 Chapter 13: Electromagnetic Environment
13.1 Electromagnetic Interference and Compatibility 13.2 High Intensity Radiated Fields and RF Hazards 13.3 Lightning Protection, Bonding and Static Dischargers
14 Chapter 14: Engine Indication, Warning and Monitoring Systems
14.1 Airbus ECAM — Electronic Centralised Aircraft Monitoring 14.2 Boeing EICAS — Engine Indicating and Crew Alerting System 14.3 Comparison, Failure Reversion and Sensor Interfacing
15 Chapter 15: Flight Management, Navigation and Surveillance Systems
15.1 Flight Management System and Control Display Unit 15.2 Inertial Reference, AHRS/ADIRU Context and GPS 15.3 Traffic Collision Avoidance and Terrain Awareness
16 Chapter 16: Fly-By-Wire, BITE, ACARS, Cabin and Information Systems
16.1 Fly-By-Wire Flight Control 16.2 Built-In Test Equipment and Central Maintenance Computers 16.3 ACARS, Cabin Systems and Information Systems
15.2 Inertial Reference, AHRS/ADIRU Context and GPS
Key Takeaways Explain This Topic AI
The former detailed 5.15 description named IRS and GPS; an IRS uses gyros and accelerometers to compute attitude, heading and position after a stationary alignment.
ALIGN mode requires the aircraft to remain stationary while the IRS gyrocompasses and determines true heading; NAV mode then integrates inertial data in flight.
GPS, the satellite-navigation example in the former detailed 5.15 description, provides range measurements from multiple satellites so the receiver can compute position, velocity and time, commonly hybridising the IRS.
Related architecture context: an ADIRU combines air-data and inertial-reference functions on many transport types; an AHRS provides attitude and heading without being a full long-range IRS.
Last updated: September 2026
15.2 Inertial Reference, AHRS/ADIRU Context and GPS
The current Appendix I gives only the broad topic 5.15 heading. Its pre-12 June 2024 detailed description named IRS (Inertial Reference System) and GPS (Global Positioning System) among typical electronic/digital systems, and this section retains them as level-1 study examples. Familiarisation means general arrangement and associated BITE, not a navigation-endorsement course. Two neighbouring architectures appear on the same aeroplanes, so they are taught here strictly as related context and are labelled as such: the Attitude and Heading Reference System (AHRS) and the Air Data Inertial Reference Unit (ADIRU) . They are not extra numbered 5.15 bullets beside IRS and GPS.
IRS: gyros, accelerometers and strapdown computation
An IRS measures two physical quantities. Gyros measure inertial angular rate about the aircraft axes. Transport units use ring-laser gyros (RLG) or fibre-optic gyros (FOG) . Both exploit the Sagnac effect: two optical beams travel opposite ways around a closed path; rotation produces a path difference (or fringe shift) proportional to angular rate. Older spinning-mass platforms exist in legacy equipment but are rare on current air-transport IRS racks. Accelerometers measure specific force (non-gravitational acceleration) along those same axes.
A modern IRS is strapdown : the sensors are fixed to the case, and a computer transforms body-axis rates and accelerations into a navigation frame. From those measurements the IRS computes attitude (pitch, roll), true heading, present position, ground speed, track, inertial vertical speed and often wind when air data are available. Three gyros and three accelerometers are the usual sensor set. Dual or triple IRS installations provide redundancy; EFIS attitude is normally supplied from these units, so an IRS fault is a cockpit-display event as well as a navigation event.
Unaided inertial position drifts with time (order of one nautical mile per hour is a typical teaching figure; actual certified performance is type-specific). That is why current aircraft hybridise IRS with GPS rather than flying a pure inertial ocean crossing as 1970s INS units did. BITE monitors gyro and accelerometer health, power, temperature and computer memory, and reports to the CMC/CFDS. A 'NAV' flag on an attitude display is an IRS/IR problem until proved otherwise.
ALIGN mode versus NAV mode (technical alignment)
Inertial alignment here means the IRS ground initialisation — levelling and gyrocompassing — before NAV. With the mode selector in ALIGN (or with the IR in align on an ADIRU overhead), the unit must be given present position — crew-entered or, on GPS-aided types, automatically from the GPS — and the aircraft must remain stationary . Two jobs happen:
Levelling (coarse align): accelerometers sense gravity so the computer can find local vertical and level the mathematical platform.
Gyrocompassing (fine align): the computer observes Earth-rate components on the gyros and solves for true heading . Earth rotation is about 15.04° per hour, so gyrocompassing takes several minutes. Mid-latitude alignment of a classic IRS is often about ten minutes; high latitudes take longer because the north-seeking Earth-rate component shrinks toward the poles. Some polar operations then use grid heading rather than true heading.
When alignment is complete, the crew selects NAV . In NAV the IRS integrates acceleration to velocity and velocity to position, while gyros maintain attitude and heading. Taxiing or rocking the aircraft during ALIGN can produce an alignment fault or a heading error that only appears later as a map shift — a classic maintenance-versus-operations discussion. A rapid or GPS-aided alignment on later systems can be shorter, but the physical rule does not change: a pure inertial gyrocompass still wants a stationary airframe.
ATT (attitude) mode is a reversion. If navigation is lost but the gyros still support attitude, ATT can restore pitch and roll, often with a heading that must be slaved or entered and that will drift. ATT does not provide a dispatchable long-range position solution. Mode-selector labels on a stand-alone IRS panel are typically OFF, ALIGN, NAV and ATT. On Airbus types the IR ALIGN lights and pushbuttons on the overhead perform the same technical alignment for each IR channel.
Warning
Do not confuse inertial alignment with magnetic compass swinging. Gyrocompassing finds true north from Earth rate. A flux valve or magnetometer (used in many AHRS units) senses magnetic heading and is a different sensor class.
GPS as the former detailed 5.15 satellite-navigation example
GPS was the satellite-navigation name printed in the former detailed Appendix I description. It is the United States Global Navigation Satellite System (GNSS) constellation; Galileo, GLONASS and BeiDou are other GNSS constellations that many multi-sensor receivers can use, but the syllabus bullet is GPS. A GPS satellite broadcasts ranging codes on L-band (civil L1 at 1575.42 MHz is the classic teaching frequency). The airborne receiver measures pseudorange to several satellites. Four satellites are the usual minimum for a three-dimensional position plus receiver-clock correction. From those ranges the receiver computes position, velocity and time.
Integrity is not automatic just because a position is displayed. Receiver Autonomous Integrity Monitoring (RAIM) uses redundant satellites to detect a misleading measurement. Approach operations may require a RAIM (or equivalent) prediction. Satellite-based augmentation (for example EGNOS in Europe) and ground-based augmentation improve accuracy and integrity where certified. The GPS antenna is normally on the upper fuselage with a clear sky view; a failed antenna, splitter or coaxial termination is a common BITE-supported fault. GPS time and position commonly update or tightly couple the IRS, bounding inertial drift. That hybrid is why an FMS map remains usable after a GPS outage for a limited inertial coast — and why a GPS fault should be read together with IRS status, not in isolation.
GPS BITE includes receiver self-test, satellite-tracking status, antenna current monitor on many installations, and bus-output validity. A 'GPS' message with all satellites visible on a ramp test, versus a 'GPS' message in a hangar with the aircraft under a steel roof, are different problems: masking versus hardware.
Related context: AHRS and ADIRU
Related context — ADIRU. On many Airbus and similar transport types the inertial function is packaged with air data in an Air Data Inertial Reference Unit . One LRU contains:
an Air Data Reference (ADR) channel that consumes pitot, static, angle-of-attack and temperature sensors and computes computed airspeed, Mach, barometric altitude and air temperatures;
an Inertial Reference (IR) channel that is the IRS function: gyros, accelerometers, alignment and NAV/ATT behaviour described above.
A typical A320-family arrangement is three ADIRUs . ADR and IR in the same box can fail independently: you may have good inertial attitude with a failed air-data channel, or the reverse. Triple installation supports voting and remaining-systems reversion on EFIS. Alignment of the IR half is still a stationary gyrocompassing alignment. Teaching point: ADIRU is how IRS plus air data are physically combined on those types; it does not replace the IRS and GPS concepts used as historical study anchors.
Related context — AHRS. An Attitude and Heading Reference System supplies pitch, roll and heading to displays and autopilots, typically using MEMS or other rate sensors plus a magnetometer (flux valve) for magnetic heading, often paired with a separate air-data computer. AHRS is common on regional, business and general-aviation types. It is not a navigation-grade long-range IRS: it does not, by itself, integrate a Schuler-tuned worldwide position the way an IRS does. Do not describe AHRS as a universal substitute that replaces IRS on large aeroplanes; the two architectures have different capabilities. AHRS is the related attitude-heading architecture you will meet on other fleets and in composite cockpit descriptions.
Unit Status in former detailed 5.15 list Principal sensors What it computes Alignment / notes
IRS Yes (IRS) RLG or FOG gyros plus accelerometers Attitude, true heading, position, ground speed ALIGN then NAV; aircraft stationary for gyrocompass
GPS receiver Yes (GPS) L-band satellite antenna and receiver Position, velocity, time; integrity via RAIM/SBAS No inertial alignment; needs satellite visibility
ADIRU Related context only ADR sensors plus IR gyros/accels Air data and inertial outputs from one LRU IR alignment as IRS; ADR independent of IR
AHRS Related context only Rate sensors plus magnetometer Attitude and magnetic heading, not long-range IRS position Magnetic slaving, not Earth-rate gyrocompass IRS
Level 1 stops at that map: which sensors sit in which box, which mode is ALIGN versus NAV, how GPS bounds IRS drift, and which names are related packaging rather than separate examples in the former detailed list.