Study guide
1.1 Alloy Steels, Crystal Structure & Specifications
EASA Part-66 Module 06 — Materials and Hardware Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Ferrous Aircraft Materials
1.1 Alloy Steels, Crystal Structure & Specifications 1.2 Heat Treatment of Ferrous Metals 1.3 Mechanical & Non-Destructive Testing of Metals 1.4 Repair & Inspection Procedures for Ferrous Structures
2 Chapter 2: Non-Ferrous Aircraft Materials
2.1 Aluminium & Aluminium Alloy Classifications 2.2 Heat Treatment & Temper Designations of Aluminium 2.3 Titanium, Magnesium & High-Temperature Alloys 2.4 Repair & Inspection Procedures for Non-Ferrous Structures
3 Chapter 3: Composite and Non-Metallic Materials
3.1 Composite Fibres, Resins & Core Materials 3.2 Sandwich Construction, Damage Modes & Repair 3.3 Wood, Fabric, Plastics & Sealants 3.4 Wooden Structures: Construction, Preservation & Repair 3.5 Fabric Covering: Inspection, Defects & Repair
4 Chapter 4: Aircraft Corrosion & Surface Protection
4.1 Principles & Chemical Fundamentals of Corrosion 4.2 Forms & Mechanisms of Aircraft Corrosion 4.3 Corrosion Inspection, Removal & Protective Treatments
5 Chapter 5: Fasteners — Threaded Fasteners & Locking Devices
5.1 Screw Threads & Thread Specifications 5.2 Aircraft Bolts, Screws & Studs 5.3 Locking Devices, Safety Wiring & Torque Procedures 5.4 Anchor Nuts, Self-Tapping Screws & Dowels 5.5 Quick-Release Fasteners, Circlips & Keys
6 Chapter 6: Fasteners — Aircraft Rivets
6.1 Solid Aircraft Rivets & Installation Practice 6.2 Blind Fasteners, Structural Fasteners & Inspection
7 Chapter 7: Pipes, Flexible Hoses & Unions
7.1 Aircraft Rigid Tubing Materials & Fabrication 7.2 Flexible Hoses & Fluid Line Identification 7.3 Aircraft Pipe Unions, Fittings & Installation
8 Chapter 8: Springs
8.1 Types, Materials & Mechanics of Aircraft Springs 8.2 Spring Testing, Inspection & Failure Modes
9 Chapter 9: Bearings
9.1 Plain Bearings, Bushings & Spherical Bearings 9.2 Rolling-Element Bearings: Ball & Roller Types 9.3 Bearing Handling, Lubrication & Defect Analysis
10 Chapter 10: Transmissions & Mechanical Drives
10.1 Gear Types, Geometries & Epicyclic Systems 10.2 Gear Ratios, Mesh Alignment, Belts & Chains
11 Chapter 11: Flight Control Cables
11.1 Aircraft Control Cable Construction & Sizing 11.2 Cable End Fittings, Swaging & Turnbuckles 11.3 Pulleys, Rigging, Tension Regulators & Cable Maintenance
12 Chapter 12: Electrical Cables & Connectors (EWIS)
12.1 EWIS Conductor Types, Insulation & AWG Sizing 12.2 Wire Harness Bundling, Routing & Clamping 12.3 Connectors, Crimping Practice & Contact Assembly 12.4 High-Tension Ignition Cables & Coaxial Transmission Lines
1.1 Alloy Steels, Crystal Structure & Specifications
Key Takeaways Explain This Topic AI
Iron is an allotropic metal existing as Body-Centered Cubic (BCC) ferrite below 912°C, Face-Centered Cubic (FCC) austenite between 912°C and 1394°C, and transforming to strained Body-Centered Tetragonal (BCT) martensite upon rapid quenching.
In the SAE/AISI 4-digit designation system, the first digit identifies the primary alloying element (e.g., 4 for molybdenum alloys), the second indicates the approximate percentage or modification, and the final two digits state the nominal carbon content in hundredths of a percent (points).
Chrome-moly steel (SAE 4130) provides superior weldability without mandatory post-weld heat treatment in thin-walled tubing, whereas nickel-chrome-moly steel (SAE 4340) delivers deep through-hardenability for heavy forgings but exhibits severe crack susceptibility in the heat-affected zone if welded.
High-strength steels exceeding 1000 MPa (~145 ksi) tensile strength exposed to acid pickling or electroplating must undergo mandatory de-embrittlement baking at 190°C–205°C (375°F–400°F) for 8 to 24 hours within 1 to 4 hours of plating to expel dissolved atomic hydrogen.
Austenitic stainless steels (AISI 300 series) have an FCC structure, are non-magnetic in the annealed state, and cannot be hardened by heat treatment; when exposed to 425°C–850°C, they suffer sensitization (weld decay) unless stabilized with titanium (AISI 321) or niobium (AISI 347).
Last updated: September 2026
1.1 Alloy Steels, Crystal Structure & Specifications
Ferrous metals—alloys based primarily on iron (Fe)—remain indispensable in primary aircraft structures where unmatched tensile strength, fatigue endurance, fracture toughness, and modulus of elasticity are required. Components such as landing gear cylinders, high-pressure hydraulic accumulators, engine mounts, transmission shafts, and structural tension bolts depend on specialized alloy and stainless steels capable of withstanding extreme cyclic stress.
Understanding ferrous metallurgy under EASA Part-66 Module 06 requires mastering the crystal structure changes of iron, standard aerospace alloy specifications, fabrication constraints, and failure mechanisms including sensitization and hydrogen embrittlement.
Allotropy of Iron and Crystal Structures
Iron is an allotropic (or polymorphic) metal, meaning it changes its crystalline lattice arrangement at specific transformation temperatures during heating and cooling. This allotropic nature is the physical foundation that makes steel heat treatable.
Allotropic Phase Crystal Lattice Structure Temperature Range Carbon Solubility Limit Magnetic State
Alpha (α) Ferrite Body-Centered Cubic (BCC) Below 912°C (1674°F) Max 0.022% at 727°C (0.008% at 20°C) Ferromagnetic up to 770°C (Curie point)
Gamma (γ) Austenite Face-Centered Cubic (FCC) 912°C to 1394°C (1674°F to 2541°F) Max 2.14% at 1148°C Completely Non-magnetic
Delta (δ) Ferrite Body-Centered Cubic (BCC) 1394°C to 1538°C (Melting Point) Max ~0.10% at 1495°C Non-magnetic / Paramagnetic
Martensite Body-Centered Tetragonal (BCT) Metastable phase from rapid quench Supersaturated carbon solution Ferromagnetic
Alpha (α) Ferrite (BCC)
At ambient room temperature, pure iron exists as alpha ferrite , having a Body-Centered Cubic (BCC) lattice with iron atoms at each corner of a cube and one atom at the geometric center. The interstitial spaces between iron atoms in BCC are relatively small, limiting maximum carbon solubility to only 0.022% by weight at 727°C (and less than 0.008% at room temperature). Pure ferrite is soft, highly ductile, and magnetic below its Curie temperature of 770°C (1418°F) .
Gamma (γ) Austenite (FCC)
Upon heating above 912°C, iron undergoes an allotropic phase change into gamma austenite , adopting a Face-Centered Cubic (FCC) lattice with an iron atom at each corner and one at the center of every face. The FCC arrangement features larger octahedral interstitial sites, allowing carbon solubility to expand up to 2.14% by weight at 1148°C . Austenite is tough, ductile, and completely non-magnetic.
Martensite (BCT)
If steel in the austenitic state is quenched at a rate faster than its critical cooling velocity, carbon atoms lack sufficient time to diffuse out of the lattice to form ferrite and cementite. Instead, the crystal lattice undergoes a rapid, diffusionless shear transformation into martensite . The trapped carbon atoms force the BCC lattice into an elongated, distorted Body-Centered Tetragonal (BCT) geometry. This severe internal lattice strain produces exceptional hardness and tensile strength, accompanied by extreme brittleness and high residual stresses.
Exam Warning / Common Trap: Never confuse austenite with martensite. Austenite is an FCC high-temperature equilibrium phase that is non-magnetic and ductile. Martensite is a non-equilibrium, metastable BCT phase produced by rapid quenching that is magnetic, extremely hard, and brittle.
Steel Numbering and Aerospace Specifications
Aircraft maintenance personnel frequently encounter three principal steel designation systems: the American SAE/AISI 4-digit and 5-digit system, the British Standard Aerospace S-Series , and European EN / Werkstoff numbers.
SAE / AISI Designation System
The Society of Automotive Engineers (SAE) and American Iron and Steel Institute (AISI) categorize steels using a standard 4-digit (or 5-digit) code: SAE [ Digit 1 ] [ Digit 2 ] [ Digits 3 and 4 ] \text{SAE } [\text{Digit 1}][\text{Digit 2}][\text{Digits 3 and 4}] SAE [ Digit 1 ] [ Digit 2 ] [ Digits 3 and 4 ]
First Digit : Designates the primary alloying element group:
- 1xxx : Carbon steels ( 10xx plain carbon, 11xx resulfurized free-machining)
- 2xxx : Nickel steels
- 3xxx : Nickel-chromium steels
- 4xxx : Molybdenum steels ( 41xx chromium-molybdenum, 43xx nickel-chromium-molybdenum, 46xx nickel-molybdenum)
- 5xxx : Chromium steels ( 51xx low chromium, 52xxx high chromium bearing steels)
- 6xxx : Chromium-vanadium steels
- 8xxx : Triple-alloy steels (nickel-chromium-molybdenum)
- 9xxx : Silicon-manganese steels
Second Digit : Indicates the approximate percentage of the major alloying element or specific alloy modification.
Last Two Digits : Specify the nominal carbon content in hundredths of one percent (referred to as "points" of carbon). For example, 40 represents 0.40% carbon.
5-Digit Exception (SAE 52100) : Ball bearing steel containing 1.00% carbon and approximately 1.45% chromium.
European and British Specifications
British Aerospace Standards : Designations prefixed with 'S' (e.g., BS S99 for 80-ton nickel-chromium-molybdenum steel; BS S154 for 2.5% nickel-chromium-molybdenum steel).
European Standards (EN 10027) : Uses both alphanumeric names and Werkstoff numeric codes:
25CrMo4 (Werkstoff 1.7218 ) is the direct European equivalent to SAE 4130.
34CrNiMo6 (Werkstoff 1.6582 ) corresponds closely to SAE 4340.
Aviation Workhorses: SAE 4130 vs. SAE 4340
The two most prominent structural alloy steels in aviation are chrome-moly 4130 and nickel-chrome-moly 4340.
- Property / Parameter SAE 4130 (Chrome-Moly) SAE 4340 (Ni-Cr-Mo)
- Nominal Composition 0.30% C, 0.95% Cr, 0.20% Mo 0.40% C, 1.80% Ni, 0.80% Cr, 0.25% Mo
- Tensile Strength (Annealed) ~560–650 MPa (81–94 ksi) ~740–860 MPa (107–125 ksi)
- Tensile Strength (Heat Treated) 1000–1400 MPa (145–200 ksi) 1500–1900 MPa (217–275 ksi)
Hardenability / Ruling Section Shallow-to-medium; core softens in sections > 20 mm Deep through-hardening; uniform strength in sections > 100 mm
Weldability Excellent (Oxy-acetylene, GTAW/TIG); no post-weld heat treatment needed in thin tubing (< 2.5 mm) Poor / Difficult ; extreme tendency toward underbead cracking in heat-affected zone (HAZ)
Common Applications Welded fuselage trusses, engine mounts, landing gear torque links, wing struts Main landing gear shock-strut cylinders, wheel axles, propeller shafts, arrestor hooks
SAE 4130 Characteristics
SAE 4130 is universally popular for light aircraft structures and engine mounting frames. The combination of chromium and molybdenum provides good hardenability, impact toughness, and fatigue strength. Crucially, the relatively low carbon content (0.30%) ensures that thin-walled tubing can be welded using Gas Tungsten Arc Welding (GTAW/TIG) or oxy-acetylene without cracking, maintaining approximately 80% to 90% of base metal strength in the as-welded condition.
SAE 4340 and 300M
SAE 4340 contains 1.8% nickel, which significantly improves low-temperature notch toughness and enables deep through-hardening across large cross-sections. In heavy forgings such as airliner landing gear outer cylinders, 4130 would fail to transform to martensite at the center during quenching, resulting in a weak core. SAE 4340 through-hardens completely.
However, the combination of 0.40% carbon and rich alloying makes 4340 highly prone to cold cracking in the Heat-Affected Zone (HAZ) when welded. Welding 4340 requires strict preheating (200°C–300°C), controlled interpass temperatures, and immediate post-weld stress relief or full re-austenitising and tempering.
Aviation Derivative (300M Steel): 300M is a modified SAE 4340 alloy containing approximately 1.6% Silicon and 0.08% Vanadium. Silicon shifts the temper embrittlement range upward, allowing the steel to be tempered at higher temperatures to achieve ultra-high tensile strengths of 1930 to 2100 MPa (280 to 305 ksi) with outstanding fracture toughness, making it the premier choice for modern commercial jet landing gears.
Hydrogen Embrittlement and De-Embrittlement Relief
High-strength steels are critically vulnerable to hydrogen embrittlement —a delayed, catastrophic brittle failure that occurs under sustained static tensile load well below the material's yield strength.
Mechanism of Failure
Absorption : During electroplating (cadmium, hard chrome, zinc), acid pickling (rust removal using hydrochloric or sulfuric acid), or chemical paint stripping, atomic hydrogen ( H + H^+ H + or H 0 H^0 H 0 ) is generated at the cathode surface and dissolves into the steel lattice.
Migration : Because atomic hydrogen is extremely small, it diffuses readily through interstitial spaces. Under service tensile stresses, hydrogen migrates to regions of maximum triaxial stress, such as thread roots, bolt head fillets, and internal micro-voids.
Fracture : Hydrogen reduces cohesive bonding forces between metal atoms along grain boundaries. When critical concentration is reached, submicroscopic intergranular cracks initiate and propagate rapidly, causing sudden, explosive fracture without warning or necking.
Critical Threshold and Prevention Protocols
Susceptible Steels : Any steel with an ultimate tensile strength exceeding 1000 MPa (~145–150 ksi) or hardness exceeding 33 HRC is strictly classified as susceptible.
Elimination of Acid Pickling : Aircraft specifications (e.g., AMS 2759/9, FAA AC 43.13-1B, EASA CS-25) prohibit acid pickling on high-strength components. Mechanical abrasive blasting (using aluminum oxide or glass beads) must be used instead.
De-Embrittlement Baking : Components subjected to electroplating must be placed into a calibrated air-circulating oven for hydrogen relief baking:
Temperature : 190°C to 205°C (375°F to 400°F) .
Duration : 8 to 24 hours (typically 23 hours minimum for ultra-high strength steels > 1800 MPa).
Time Window : Baking MUST commence within 1 to 4 hours after removal from the electroplating bath, before atomic hydrogen can diffuse, recombine into molecular gas ( H 2 H_2 H 2 ), or initiate permanent micro-fissures.
Maintenance Scenario: A technician installs newly cadmium-plated SAE 4340 landing gear attachment bolts (tensile strength 1600 MPa). The plating vendor's certificate of conformance lacks a de-embrittlement bake entry. Under EASA Part-M / Part-145 regulations, the technician must reject the bolts immediately. Installing unbaked high-strength plated bolts risks delayed in-service structural separation under static pretension.
Stainless Steels (Corrosion-Resistant Steels - CRES)
Stainless steels are iron-base alloys containing a minimum of 10.5% to 12% Chromium . When exposed to oxygen, chromium reacts instantaneously to form an ultra-thin, continuous, self-healing chromium oxide ( C r 2 O 3 Cr_2O_3 C r 2 O 3 ) passive film on the surface, preventing further oxidation.
Stainless steels are grouped into four metallurgical families based on their crystal structure and hardening mechanism:
Stainless Steel Family Typical Aircraft Grades Crystal Lattice Magnetic Behavior Hardening Mechanism Aviation Applications
Austenitic AISI 301, 304, 316, 321, 347 FCC Non-magnetic (cold work induces slight magnetism) Cold work only (work hardening); cannot be hardened by heat treatment Firewalls, exhaust manifolds, hydraulic lines, fuel tanks
Martensitic AISI 410, 420, 440C BCT (quenched) Strongly magnetic Quench and temper heat treatment Turbine blades, precision ball bearing races (440C), surgical tools
Ferritic AISI 405, 430 BCC Strongly magnetic Non-hardenable by heat treatment; minor cold work Cowling fasteners, decorative non-structural cabin trim
Precipitation-Hardening (PH) 17-7PH, 15-5PH, 17-4PH Martensitic or Semiaustenitic Strongly magnetic in aged state Low-temperature precipitation aging (480°C–620°C) Landing gear actuators, structural fittings, high-strength pins
Austenitic Stainless Steels (300 Series)
Known as "18-8" steels (typically 18% Chromium and 8% Nickel), austenitic grades are the most corrosion-resistant and ductile stainless steels. The high nickel content stabilizes the FCC austenite lattice down to ambient temperature. They exhibit outstanding impact toughness even at cryogenic temperatures and cannot be hardened by conventional heat treatment; they can only be strengthened through cold mechanical deformation (work hardening: 1/4 hard, 1/2 hard, full hard).
Sensitization and Weld Decay
When austenitic stainless steel is heated into or slowly cooled through the critical temperature zone of 425°C to 850°C (800°F to 1550°F) —such as during welding or exhaust operation—carbon diffuses rapidly to grain boundaries.
Carbon reacts with adjacent chromium to precipitate chromium carbides ( C r 23 C 6 Cr_{23}C_6 C r 23 C 6 ) along the grain boundaries.
Chromium diffuses thousands of times slower than carbon, so it is drawn exclusively from a narrow zone immediately bordering the grain boundary.
The chromium content in this bordering zone drops well below the 10.5% threshold required to maintain the passive oxide layer.
This depleted region becomes anodic relative to the chromium-rich grain interiors. In the presence of moisture or corrosive exhaust condensate, galvanic action causes rapid intergranular corrosion , commonly known as weld decay .
Preventing Sensitization
To avoid weld decay in aircraft exhaust systems, engine tailpipes, and welded manifolds, aviation engineers use two metallurgical solutions:
Extra Low Carbon Grades : Alloys such as AISI 304L and 316L restrict maximum carbon to 0.03%, depriving the alloy of the carbon needed to form carbides.
Stabilized Stainless Steels :
AISI 321 : Alloyed with Titanium ( T i ≥ 5 × % C Ti \ge 5 \times \%C T i ≥ 5 × % C ). Titanium has a far higher chemical affinity for carbon than chromium does. Titanium scavenges the carbon to form harmless titanium carbide ( T i C TiC T i C ), leaving chromium in solution to maintain passivity.
AISI 347 : Alloyed with Niobium (Columbium) ( N b ≥ 10 × % C Nb \ge 10 \times \%C N b ≥ 10 × % C ). Niobium binds carbon as niobium carbide ( N b C NbC N b C ), preserving corrosion resistance.
Martensitic Stainless Steels (400 Series)
Containing 11.5% to 18% Chromium and higher carbon levels (0.15% to 1.20%) without nickel, these alloys transform to austenite on heating and form hard martensite upon quenching. AISI 440C contains 1.0% to 1.2% carbon, achieving up to 60 HRC; it is standard for aircraft instrument and control surface ball bearings.
Precipitation-Hardening (PH) Steels
PH steels combine the superior corrosion resistance of austenitic stainless steels with the high tensile strength of alloy steels:
17-7PH : Contains 17% Cr, 7% Ni, and 1% Aluminum.
15-5PH / 17-4PH : Contain 15–17% Cr, 4–5% Ni, and 3–5% Copper.
Components are machined in the soft solution-treated condition and then aged at moderate temperatures ( 480°C to 620°C / 900°F to 1150°F ). During aging, extremely fine sub-microscopic intermetallic precipitates (such as N i 3 A l Ni_3Al N i 3 A l or copper-rich clusters) precipitate throughout the matrix, pinning dislocations and elevating tensile strength up to 1400 MPa. Because final aging is performed at moderate temperatures, parts suffer virtually zero distortion, scale, or decarburization.