Study guide
12.1 Datum, Arm, Moment & Center of Gravity Principles
EASA Part-66 Module 07 — Maintenance Practices Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Safety Precautions — Electricity, Gases & Chemical Hazards
1.1 Electrical-System Hazards, Isolation & Protective Equipment 1.2 Compressed Gases, Pressure Vessels & Oxygen System Safety 1.3 Hazardous Chemicals, Solvents, Oils & Personal Protective Equipment
2 Chapter 2: Safety Precautions — Fire Protection, Confined Spaces & Emergency Response
2.1 Fire Classifications, Extinguishing Agents & Asphyxiation Risks 2.2 Confined-Space Entry, Fuel-Tank Safety & CDCCL Control 2.3 Emergency Response, Accident Remediation & Ballistic Recovery Systems
3 Chapter 3: Workshop Practices, Hand Tools & Precision Measurement
3.1 Workshop Housekeeping, Tool Control & Foreign Object Debris (FOD) 3.2 Engineering Dimensions, Allowances & Tolerances 3.3 Hand Tools, Powered Equipment & Operating Safety 3.4 Precision Measuring Instruments & Standards Traceability
4 Chapter 4: Fastener Torquing & Avionic Test Equipment
4.1 Torque Wrenches, Extension Calculations & Calibration Care 4.2 Multimeters, Megohmmeters & Insulation Testing 4.3 Bonding Testers, Milliohmmeters & Oscilloscopes
5 Chapter 5: Engineering Drawings, Standards & Fits
5.1 Orthographic Projections, Title Blocks & Revision Control 5.2 Drawing Line Conventions, Symbols & ATA Specification 100/iSpec 2200 5.3 Electrical Schematics, Wiring Interconnects & Component Location 5.4 Systems of Limits, Fits, Clearances & Shaft Alignment
6 Chapter 6: Electrical Wiring Interconnection System (EWIS)
6.1 EWIS Principles, Wire Types & Loom Routing Practices 6.2 Crimp Terminations, Connector Pin Insertion & Extraction Tooling 6.3 Electrical Bonding, Grounding Resistance & Electromagnetic Shielding
7 Chapter 7: Aircraft Riveting Practice
7.1 Solid and Blind Rivet Classifications, Materials & Head Markings 7.2 Rivet Spacing, Pitch, Edge Distance & Structural Layout 7.3 Countersinking, Dimpling Techniques & Rivet Installation 7.4 Rivet Joint Inspection, Failure Modes & Drill-Out Procedures
8 Chapter 8: Sheet Metal Working & Composite Materials
8.1 Sheet Metal Forming, Neutral Axis & Bend Allowance Calculations 8.2 Welding, Brazing, Soldering & Structural Adhesive Bonding 8.3 Composite Reinforcements, Pre-Preg Cold Storage & Clean Room Practice 8.4 Additive Manufacturing in Aircraft Maintenance
9 Chapter 9: Pipes, Flexible Hoses & Springs
9.1 Aircraft Rigid Tubing, Bending & 37-Degree Flaring Standards 9.2 Flexible Hoses, Installation Geometry & Serviceability 9.3 Aircraft Springs: Classifications, Rate Testing & Inspection
10 Chapter 10: Bearings & Mechanical Transmissions
10.1 Bearing Classifications, Load Types & Lubrication Practice 10.2 Bearing Defect Analysis: Spalling, Brinelling & Overheating 10.3 Gears, Gearboxes, Backlash Measurement & Belt/Chain Drives
11 Chapter 11: Flight Control Cables & Rigging
11.1 Aircraft Cable Construction, Sizing & Swaged Terminal Fittings 11.2 Cable Rigging, Turnbuckles & Temperature-Compensated Tensioning 11.3 Pulleys, Fairleads, Cable Inspection & Broken Strand Limits
12 Chapter 12: Aircraft Weight and Balance
12.1 Datum, Arm, Moment & Center of Gravity Principles 12.2 Aircraft Weighing Preparation, Equipment & Tare Deduction 12.3 Center of Gravity Calculations, Flight Limits & Ballast Adjustments
13 Chapter 13: Aircraft Handling, Storage & Winter Operations
13.1 Towing, Taxiing Protocols, Shear Pins & Wing Walkers 13.2 Jacking with Locking Collars, Chocking & Severe Weather Mooring 13.3 Ground De-icing and Anti-icing: Fluids, Clean Aircraft Concept & Holdover Times 13.4 Aircraft Parking, Protective Covers & Engine/Airframe Long-Term Preservation
14 Chapter 14: Inspection, Defect Assessment, Maintenance Procedures & Documentation
14.1 NDT Methods: Liquid Penetrant, Magnetic Particle, Eddy Current, Ultrasonic & Radiography 14.2 Corrosion Classifications, Mechanical Removal & Chemical Surface Treatments 14.3 Inspections After Lightning, Heavy Landing & Other Abnormal Events 14.4 Controlled Disassembly, Inspection & Reassembly 14.5 Troubleshooting, Defect Assessment & Repair Control 14.6 Maintenance Documentation, Work Reports & Shift Handover 14.7 Maintenance Planning, Stores Control, CRS & Occurrence Reporting
12.1 Datum, Arm, Moment & Center of Gravity Principles
Key Takeaways Explain This Topic AI
Center of Gravity (CG) represents the single theoretical point through which the resultant gravitational force acts; safe flight requires the CG to remain within rigidly certified forward and aft limits across all loading configurations.
The Reference Datum is an imaginary vertical plane established by the aircraft manufacturer from which all longitudinal horizontal distances (Arms) are measured, with stations aft of the datum carrying positive signs and stations forward carrying negative signs.
Moment is the rotational tendency produced by a mass acting at a distance (Moment = Mass × Arm); the aircraft CG station is calculated by dividing the sum of all moments by the total aircraft mass.
Operating forward of the forward CG limit causes severe nose-heaviness, excessive tailplane downforce, increased stall speeds, and potential loss of elevator pitch authority during the landing flare; operating aft of the aft CG limit degrades longitudinal static stability, causing violent pitch-up divergence and flat spin hazards.
On transport category aircraft with swept wings, CG position is expressed as a percentage of the Mean Aerodynamic Chord (% MAC) relative to the Leading Edge of MAC (LEMAC) and Trailing Edge of MAC (TEMAC).
Last updated: September 2026
12.1 Datum, Arm, Moment & Center of Gravity Principles
Aircraft weight and balance is one of the most critical airworthiness disciplines in aviation maintenance. No matter how structurally sound or aerodynamically refined an aircraft is, an improper distribution of mass can render it uncontrollable in flight or cause structural failure during standard maneuvers. For the certifying aircraft maintenance engineer under EASA Part-66 Module 7 (Maintenance Practices), understanding the fundamental mechanics of balance, longitudinal stability, moments, and chord geometry is essential when completing maintenance weighing, performing equipment modifications, or releasing an aircraft to service.
Fundamental Definitions & Principles of Equilibrium
An aircraft in straight-and-level, unaccelerated flight is in mechanical equilibrium. All opposing forces and moments acting upon the airframe must balance:
Lift generated by the wings opposes Weight (gravitational force).
Thrust produced by the powerplant opposes Drag (aerodynamic resistance).
All rotational pitching moments about the pitch axis must sum to zero (Total Pitching Moment = 0). AIRCRAFT EQUILIBRIUM OF FORCES
- Lift (L)
- ^
- |
- Thrust (T) <-----+-----> Drag (D)
- |
- v
- Weight (W)
- (Acting at CG)
- 1. Center of Gravity (CG)
The Center of Gravity (CG) is the theoretical point through which the resultant gravitational force of the entire aircraft acts. It is the physical balance point: if the aircraft were suspended from a single cable attached to this point, the airframe would balance perfectly horizontal in both the longitudinal and lateral axes.
2. Reference Datum
The Reference Datum is an imaginary vertical plane perpendicular to the longitudinal axis of the aircraft from which all horizontal longitudinal distances are measured. The manufacturer defines the exact datum in the Type Certificate Data Sheet (TCDS) and Aircraft Maintenance Manual (AMM). Common datum locations chosen by airframe designers include:
The tip of the propeller spinner or nose radome.
The engine firewall (common on single-engine general aviation airframes).
The wing leading edge or centerline of the main landing gear.
A specified distance forward of the aircraft nose (e.g., Station 0 located 100 inches forward of the radome tip). Locating the datum forward of the nose ensures that all structural components, fuel tanks, and payload bays carry positive arms , completely eliminating negative numbers from operational loading calculations.
3. Station & Arm
Station (STA): A specific longitudinal location along the fuselage expressed in distance units (inches or millimeters/meters) from the reference datum.
Arm: The horizontal distance from the reference datum to the center of gravity of an individual item (such as an engine, avionics rack, fuel tank, passenger seat, or cargo bay). In mathematical calculations:
Items located aft (rearward) of the datum have a positive arm (+) .
Items located forward of the datum have a negative arm (-) .
4. Moment
A Moment is the measure of the rotational tendency of a weight about a specified point (the datum or the CG). It represents the product of mass (or weight) multiplied by its horizontal arm: Moment = Mass (or Weight) × Arm \text{Moment} = \text{Mass (or Weight)} \times \text{Arm} Moment = Mass (or Weight) × Arm
Units for moment depend on the measurement system used:
Imperial: Pound-inches (lb·in) or pound-feet (lb·ft).
Metric: Kilogram-meters (kg·m) or Newton-meters (N·m).
Because moments on transport aircraft reach tens of millions of pound-inches, manufacturers utilize Moment Reduction Factors or Index Units to simplify arithmetic and prevent human transcription errors: Index Unit = Moment 1 , 000 or Moment 100 , 000 \text{Index Unit} = \frac{\text{Moment}}{1,000} \quad \text{or} \quad \frac{\text{Moment}}{100,000} Index Unit = 1 , 000 Moment or 100 , 000 Moment
5. Center of Gravity Formula
The fundamental center of gravity of any aircraft assembly is derived from the principle of moments: the total moment of the aircraft about the datum is equal to the sum of the individual moments of all component parts. Dividing the total moment by the total mass yields the exact CG station: Center of Gravity (CG) = Total Moment Total Mass (Weight) = Sum of Individual Moments Total Aircraft Mass \text{Center of Gravity (CG)} = \frac{\text{Total Moment}}{\text{Total Mass (Weight)}} = \frac{\text{Sum of Individual Moments}}{\text{Total Aircraft Mass}} Center of Gravity (CG) = Total Mass (Weight) Total Moment = Total Aircraft Mass Sum of Individual Moments
Forward and Aft Center of Gravity Limits: Aerodynamic Hazards
Every certified aircraft has strict Forward CG Limits and Aft CG Limits published in its TCDS. Operating outside these boundaries degrades flight stability and control authority, leading to severe flight hazards. CERTIFIED CENTER OF GRAVITY ENVELOPE
- Forward Limit Aft Limit
- | |
- v v
- +-----+-------------------------------------------------+-----+
- | NO-GO | <---------- APPROVED FLIGHT ENVELOPE ---------> | NO-GO |
- +-----+-------------------------------------------------+-----+
- Nose Heavy Tail Heavy
- High Drag / High Stall Speed Longitudinally Unstable
- Loss of Flare Pitch Authority Flat Spin Hazard
- The Forward CG Limit (Nose-Heavy Condition)
When the CG is loaded forward of the forward limit:
Increased Tailplane Downforce: On conventional aircraft, the center of lift (CL) on the wing is located aft of the center of gravity. This arrangement creates a natural nose-down pitching moment. To maintain level flight, the horizontal stabilizer and elevator must produce a downward aerodynamic force (tail-down force). As the CG moves farther forward, the moment arm between CG and CL lengthens, requiring a much larger downward tail force.
Higher Wing Loading & Stall Speed: The wing must now support not only the aircraft's actual gross weight, but also the additional downward aerodynamic load generated by the tailplane (Total Wing Lift = Aircraft Weight + Tailplane Downforce). This increased effective wing loading directly raises the aircraft's stall speed (Vs) .
Excessive Trim Drag & Fuel Burn: The high tail-down force produces significant trim drag, reducing maximum cruise speed and increasing fuel consumption.
Exhaustion of Elevator Authority (Landing Flare): The most hazardous consequence occurs during the landing approach. At low airspeeds with flaps fully extended, the wing downwash changes and dynamic elevator effectiveness drops. When the pilot attempts to round out and flare for touchdown, full nose-up elevator deflection may be incapable of overcoming the excessive nose-down moment. The aircraft touches down hard on its nose gear, frequently causing nose gear collapse, firewall buckling, or runway excursion.
The Aft CG Limit (Tail-Heavy Condition)
Loading the aircraft aft of the certified aft limit is among the most lethal weight-and-balance conditions:
Degraded or Reversed Longitudinal Stability: Longitudinal static stability requires an aircraft to return spontaneously to its trimmed angle of attack following an aerodynamic pitch disturbance (such as turbulence). When the CG moves aft toward the aerodynamic neutral point of the airframe, the restoring nose-down moment vanishes. If the CG moves aft of the neutral point, the aircraft becomes statically and dynamically unstable : any upward gust produces an uncommanded pitch-up that accelerates into a divergent stall.
Extremely Light Stick Forces: Control column forces in pitch become dangerously light. A pilot applying a small pull on the controls can inadvertently overstress the airframe or pull excessive Gs.
Violent Pitch-Up & Flat Spin Hazard: In an aerodynamic stall with an extreme aft CG, the aircraft pitches violently upward rather than nose-down. The lack of nose-down elevator authority prevents the pilot from lowering the nose to break the stall. The aircraft enters a flat spin , where centrifugal forces hold the airframe in a flat, rotating descent with separated airflow over the tail surfaces, rendering aerodynamic recovery impossible.
Flight Characteristic Forward CG (Nose-Heavy) Aft CG (Tail-Heavy)
Longitudinal Stability Excessively stable; resistant to pitch changes Drastically reduced; neutral or dynamically unstable
Control Stick Forces Very heavy stick forces; sluggish pitch response Abnormally light stick forces; extreme risk of over-G
Stall Speed (Vs) Higher stall speed (due to tailplane downforce load) Lower stall speed (tail provides upward lift)
Cruise Performance Reduced cruise speed; higher fuel burn (trim drag) Increased cruise speed; lower fuel burn (less trim drag)
Critical Flight Hazard Running out of nose-up elevator during landing flare Unrecoverable aerodynamic stall and flat spin
Mean Aerodynamic Chord (MAC), LEMAC & TEMAC
On large transport category aircraft, particularly those with swept-back or tapered wings, the width of the wing chord varies continuously from the wing root to the wing tip. Expressing the CG position as a simple station in inches or millimeters gives little direct intuition regarding its aerodynamic relationship with the wing's lift distribution. Therefore, aerodynamicists and flight dispatchers express the CG as a percentage of the Mean Aerodynamic Chord (% MAC) .
Defining the Mean Aerodynamic Chord (MAC)
The Mean Aerodynamic Chord (MAC) is the chord of an imaginary rectangular airfoil that possesses the exact same aerodynamic lift vector, drag characteristics, and pitching moments as the actual complex, tapered, or swept wing. SWEPT WING MEAN AERODYNAMIC CHORD (MAC)
- Wing Root Leading Edge (STA 400)
- |
- v=====================
- | |
- | LEMAC (STA 550)
- | | |
- | v---------+---- TEMAC (STA 750)
- | | MAC | |
- | |<------->| |
- | | | |
- +=====================+====+ Wing Tip Trailing Edge
- |<------->|
- MAC = 200 in
Key geometric reference points on the MAC include:
LEMAC: Leading Edge of the Mean Aerodynamic Chord, specified as a station distance from the reference datum.
TEMAC: Trailing Edge of the Mean Aerodynamic Chord, specified as a station distance from the datum.
MAC Length: The physical dimension between LEMAC and TEMAC: MAC = TEMAC − LEMAC \text{MAC} = \text{TEMAC} - \text{LEMAC} MAC = TEMAC − LEMAC
Expressing Center of Gravity as % MAC
The CG station is converted into a percentage of the MAC using the following standard equation: % MAC = CG Station − LEMAC MAC × 100 % \% \text{ MAC} = \frac{\text{CG Station} - \text{LEMAC}}{\text{MAC}} \times 100\% % MAC = MAC CG Station − LEMAC × 100%
Conversely, if the % MAC is known from a load manifest or trim sheet, the physical station of the center of gravity is computed by: CG Station = LEMAC + ( % MAC 100 × MAC ) \text{CG Station} = \text{LEMAC} + \left( \frac{\% \text{ MAC}}{100} \times \text{MAC} \right) CG Station = LEMAC + ( 100 % MAC × MAC )
Step-by-Step % MAC Calculation Example
An aircraft Type Certificate Data Sheet provides the following geometric data:
- Reference Datum: 100 inches forward of fuselage nose
- LEMAC: Station 650.0 inches
- TEMAC: Station 850.0 inches
- Current Loaded CG: Station 702.0 inches
Calculate the length of the MAC: MAC = TEMAC − LEMAC = 850.0 − 650.0 = 200.0 inches \text{MAC} = \text{TEMAC} - \text{LEMAC} = 850.0 - 650.0 = 200.0\text{ inches} MAC = TEMAC − LEMAC = 850.0 − 650.0 = 200.0 inches
Calculate the distance of the CG aft of LEMAC: Distance aft of LEMAC = CG − LEMAC = 702.0 − 650.0 = 52.0 inches \text{Distance aft of LEMAC} = \text{CG} - \text{LEMAC} = 702.0 - 650.0 = 52.0\text{ inches} Distance aft of LEMAC = CG − LEMAC = 702.0 − 650.0 = 52.0 inches
Calculate the % MAC: % MAC = 52.0 200.0 × 100 % = 0.26 × 100 % = 26.0 % MAC \% \text{ MAC} = \frac{52.0}{200.0} \times 100\% = 0.26 \times 100\% = 26.0\% \text{ MAC} % MAC = 200.0 52.0 × 100% = 0.26 × 100% = 26.0% MAC
If the certified operational flight envelope for this aircraft specifies an allowable CG range of 18.0% to 32.0% MAC , the loaded aircraft at 26.0% MAC sits comfortably within approved airworthiness limits.
- Realistic Maintenance Scenario & Common Exam Traps
- Realistic Maintenance Scenario
A licensed aircraft maintenance engineer is performing a post-maintenance weight-and-balance verification on a twin-turboprop transport after the installation of heavy galley equipment in the aft fuselage. The technician computes the new empty weight center of gravity at Station 720.0 inches. The aircraft specifications record LEMAC at Station 600.0 inches and a MAC of 400.0 inches. The certified aft CG limit is 28.0% MAC.
The engineer computes: % MAC = 720.0 − 600.0 400.0 × 100 % = 120.0 400.0 × 100 % = 30.0 % MAC \% \text{ MAC} = \frac{720.0 - 600.0}{400.0} \times 100\% = \frac{120.0}{400.0} \times 100\% = 30.0\% \text{ MAC} % MAC = 400.0 720.0 − 600.0 × 100% = 400.0 120.0 × 100% = 30.0% MAC
The newly calculated empty CG of 30.0% MAC exceeds the certified aft limit of 28.0% MAC by 2.0% MAC. Releasing the aircraft in this state would compromise longitudinal stability, leading to light stick forces and dangerous pitch-up tendencies. The engineer halts release to service, calculates permanent nose ballast requirements, installs certified ballast in the forward avionics bay, and updates the weight and balance report.
Common Exam Traps
Trap 1: Confusing algebraic signs of arms. If an aircraft datum is located at the wing leading edge or engine firewall, components forward of that datum have a negative arm (-) . Adding weight forward of the datum creates a negative moment (Positive Weight × Negative Arm = Negative Moment). Subtracting weight forward of the datum creates a positive moment (Negative Weight × Negative Arm = Positive Moment). Missing a negative sign will completely invalidate the CG calculation.
Trap 2: Believing a forward CG is always "safer" than an aft CG. While an aft CG is notoriously dangerous for stall recovery and stability, an extreme forward CG can lead to structural damage during landing because the elevator runs out of nose-up pitch authority in ground effect, slamming the nose gear into the tarmac.
Trap 3: Inverting the % MAC equation. Exam candidates frequently place TEMAC in the numerator or divide by the distance to the datum. Always remember that % MAC measures the position relative to LEMAC , divided by the length of the MAC .