Study guide
8.4 Additive Manufacturing in Aircraft Maintenance
EASA Part-66 Module 07 — Maintenance Practices Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Safety Precautions — Electricity, Gases & Chemical Hazards
1.1 Electrical-System Hazards, Isolation & Protective Equipment 1.2 Compressed Gases, Pressure Vessels & Oxygen System Safety 1.3 Hazardous Chemicals, Solvents, Oils & Personal Protective Equipment
2 Chapter 2: Safety Precautions — Fire Protection, Confined Spaces & Emergency Response
2.1 Fire Classifications, Extinguishing Agents & Asphyxiation Risks 2.2 Confined-Space Entry, Fuel-Tank Safety & CDCCL Control 2.3 Emergency Response, Accident Remediation & Ballistic Recovery Systems
3 Chapter 3: Workshop Practices, Hand Tools & Precision Measurement
3.1 Workshop Housekeeping, Tool Control & Foreign Object Debris (FOD) 3.2 Engineering Dimensions, Allowances & Tolerances 3.3 Hand Tools, Powered Equipment & Operating Safety 3.4 Precision Measuring Instruments & Standards Traceability
4 Chapter 4: Fastener Torquing & Avionic Test Equipment
4.1 Torque Wrenches, Extension Calculations & Calibration Care 4.2 Multimeters, Megohmmeters & Insulation Testing 4.3 Bonding Testers, Milliohmmeters & Oscilloscopes
5 Chapter 5: Engineering Drawings, Standards & Fits
5.1 Orthographic Projections, Title Blocks & Revision Control 5.2 Drawing Line Conventions, Symbols & ATA Specification 100/iSpec 2200 5.3 Electrical Schematics, Wiring Interconnects & Component Location 5.4 Systems of Limits, Fits, Clearances & Shaft Alignment
6 Chapter 6: Electrical Wiring Interconnection System (EWIS)
6.1 EWIS Principles, Wire Types & Loom Routing Practices 6.2 Crimp Terminations, Connector Pin Insertion & Extraction Tooling 6.3 Electrical Bonding, Grounding Resistance & Electromagnetic Shielding
7 Chapter 7: Aircraft Riveting Practice
7.1 Solid and Blind Rivet Classifications, Materials & Head Markings 7.2 Rivet Spacing, Pitch, Edge Distance & Structural Layout 7.3 Countersinking, Dimpling Techniques & Rivet Installation 7.4 Rivet Joint Inspection, Failure Modes & Drill-Out Procedures
8 Chapter 8: Sheet Metal Working & Composite Materials
8.1 Sheet Metal Forming, Neutral Axis & Bend Allowance Calculations 8.2 Welding, Brazing, Soldering & Structural Adhesive Bonding 8.3 Composite Reinforcements, Pre-Preg Cold Storage & Clean Room Practice 8.4 Additive Manufacturing in Aircraft Maintenance
9 Chapter 9: Pipes, Flexible Hoses & Springs
9.1 Aircraft Rigid Tubing, Bending & 37-Degree Flaring Standards 9.2 Flexible Hoses, Installation Geometry & Serviceability 9.3 Aircraft Springs: Classifications, Rate Testing & Inspection
10 Chapter 10: Bearings & Mechanical Transmissions
10.1 Bearing Classifications, Load Types & Lubrication Practice 10.2 Bearing Defect Analysis: Spalling, Brinelling & Overheating 10.3 Gears, Gearboxes, Backlash Measurement & Belt/Chain Drives
11 Chapter 11: Flight Control Cables & Rigging
11.1 Aircraft Cable Construction, Sizing & Swaged Terminal Fittings 11.2 Cable Rigging, Turnbuckles & Temperature-Compensated Tensioning 11.3 Pulleys, Fairleads, Cable Inspection & Broken Strand Limits
12 Chapter 12: Aircraft Weight and Balance
12.1 Datum, Arm, Moment & Center of Gravity Principles 12.2 Aircraft Weighing Preparation, Equipment & Tare Deduction 12.3 Center of Gravity Calculations, Flight Limits & Ballast Adjustments
13 Chapter 13: Aircraft Handling, Storage & Winter Operations
13.1 Towing, Taxiing Protocols, Shear Pins & Wing Walkers 13.2 Jacking with Locking Collars, Chocking & Severe Weather Mooring 13.3 Ground De-icing and Anti-icing: Fluids, Clean Aircraft Concept & Holdover Times 13.4 Aircraft Parking, Protective Covers & Engine/Airframe Long-Term Preservation
14 Chapter 14: Inspection, Defect Assessment, Maintenance Procedures & Documentation
14.1 NDT Methods: Liquid Penetrant, Magnetic Particle, Eddy Current, Ultrasonic & Radiography 14.2 Corrosion Classifications, Mechanical Removal & Chemical Surface Treatments 14.3 Inspections After Lightning, Heavy Landing & Other Abnormal Events 14.4 Controlled Disassembly, Inspection & Reassembly 14.5 Troubleshooting, Defect Assessment & Repair Control 14.6 Maintenance Documentation, Work Reports & Shift Handover 14.7 Maintenance Planning, Stores Control, CRS & Occurrence Reporting
8.4 Additive Manufacturing in Aircraft Maintenance
Key Takeaways Explain This Topic AI
Additive manufacturing builds parts from controlled digital definition, usually layer by layer, and includes several processes with different materials and defect mechanisms.
A printed part is not approved for installation merely because its geometry matches; design approval, material and process qualification, production control, release documentation, and configuration control remain necessary.
Powder, resin, filament, wire, shielding gas, energy source, machine condition, build orientation, and thermal history can all affect final properties.
Post-processing and inspection are part of the qualified manufacturing route, not optional finishing steps.
Maintenance organisations must protect digital configuration, material traceability, and records and must not locally print an aircraft part without approved authority.
Last updated: September 2026
8.4 Additive Manufacturing in Aircraft Maintenance
Additive manufacturing (AM) creates an item from a controlled digital definition by adding material, commonly in successive layers. It differs from subtractive machining, which removes material from stock, and from forming, which reshapes material. Aviation uses AM for tooling, prototypes, cabin or system parts, and some highly engineered metallic components. The maintenance lesson is not that any workshop can print a replacement. It is that the process chain, approval basis, and traceability determine airworthiness.
Process families
Powder-bed fusion spreads thin layers of polymer or metal powder and selectively fuses each layer with an energy source. Directed-energy deposition feeds powder or wire into a melt region and may be used for manufacture or a specifically approved repair process. Material extrusion deposits a softened thermoplastic filament. Vat photopolymerisation cures liquid resin with light. Binder jetting bonds powder before later curing or sintering. Sheet lamination and material jetting use other layer-building approaches.
Each family has its own limitations. A process name alone does not establish strength, temperature capability, fire behaviour, fatigue resistance, surface finish, dimensional accuracy, or suitability for an aircraft location.
The controlled digital thread
The approved design definition includes more than visible shape. It may control material, machine, software, build orientation, support strategy, layer parameters, witness specimens, heat treatment, hot-isostatic pressing, machining, surface treatment, inspection, and acceptance limits. A change to the file, software version, orientation, powder lot, energy input, or post-processing route can change properties even if the finished part looks identical.
Configuration control therefore protects source files, revisions, build records, and authorised access. Cybersecurity matters because an unnoticed change to a digital model or parameter set can create a latent defect. Production records link the installed item to its approved definition and manufacturing history.
Material and process control
Feedstock is controlled for identity, chemistry, particle or filament condition, contamination, storage, and reuse where permitted. Metal powders can be combustible and create inhalation or static hazards; reactive powders may require inert atmospheres and specialised fire precautions. Resins and solvents may be irritants or sensitising. Lasers, electron beams, hot surfaces, pressure systems, and inert gases introduce further hazards. The machine and material safety instructions, SDS, ventilation, PPE, housekeeping, and emergency plan control the work.
Machine calibration, environmental control, build-platform preparation, and parameter verification are essential. For metals, scan strategy and thermal history affect microstructure, residual stress, porosity, and distortion. For polymers, moisture, cooling, cure, and orientation can affect bonding and dimensions. An interruption or alarm must be assessed under the qualified process rather than simply restarted by intuition.
Orientation, defects, and post-processing
Layered construction can produce direction-dependent properties. Build orientation influences support requirements, surface condition, dimensional accuracy, and loading relative to layer interfaces. Potential imperfections include lack of fusion, porosity, inclusions, cracking, warping, delamination, incomplete cure, trapped powder, and surface-connected notches.
Post-processing may include support removal, stress relief, heat treatment, hot-isostatic pressing, depowdering, cleaning, machining, drilling, shot peening, coating, or sealing. These steps are part of the approved route. An internal passage that retains powder or a machined surface that removes too much allowance can make the part unacceptable.
Inspection combines the methods specified for the material, geometry, and defect of concern. Dimensional inspection may use gauges, coordinate measurement, or scanning. Surface and internal integrity may require visual inspection, penetrant, radiography, computed tomography, ultrasonic methods, or process-monitoring evidence. No single method finds every AM defect. Acceptance criteria come from the approved manufacturing data.
Maintenance and installation control
Before accepting an AM part, verify identity, configuration, authorised release documentation, batch or serial traceability, life limitations, storage condition, and any installation restrictions. Inspect the item and its packaging as required. During installation, follow the same approved data and independent-inspection controls that apply to conventionally manufactured parts.
A maintenance organisation must not scan a broken component, modify a downloadable model, and print an aircraft replacement merely because the part fits. Production or repair requires the appropriate design approval and organisational authority. Similarly, an apparently minor local AM repair is not acceptable unless it is explicitly covered by approved repair data and performed within the authorised process.
For exam purposes, remember the chain: approved design definition; controlled feedstock and machine; recorded build; qualified post-processing; specified inspection; release and traceability. Breaking any link can make a geometrically correct part unairworthy.
Process-to-Control Map
AM element Typical control question
Digital definition Is the authorised file and revision protected from uncontrolled change?
Feedstock Is identity, lot, condition, storage and permitted reuse traceable?
Build Are machine, software, orientation, parameters and interruptions recorded?
Post-process Were all qualified heat treatment, cleaning, machining and finishing steps completed?
Inspection and release Do results meet approved criteria, and can the item be traced to its release records?