Study guide
6.2 Longitudinal Stability & Centre of Gravity Limits
EASA Part-66 Module 08 - Basic Aerodynamics Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Physics of the Atmosphere
1.1 International Standard Atmosphere (ISA) Datum & Atmospheric Layers 1.2 Atmospheric Pressure, Temperature, and Air Density Variations 1.3 Humidity, Dew Point, and Density Altitude Effects on Aircraft Performance
2 Chapter 2: Aerodynamics & Airflow Characteristics
2.1 Airflow Around Bodies & The Boundary Layer 2.2 Flow Phenomena: Upwash, Downwash, Wingtip Vortices & Stagnation Point 2.3 Aerofoil Geometry & Design Parameters
3 Chapter 3: Lift, Drag & Aerodynamic Forces
3.1 Bernoulli's Principle, Venturi Effect & Lift Generation 3.2 The Lift Equation & Lift Coefficient 3.3 Drag Components: Parasite, Profile & Induced Drag 3.4 The Total Drag Polar Curve & Maximum L/D Ratio
4 Chapter 4: Theory of Flight, Maneuvers & Stall Dynamics
4.1 Equilibrium of Forces in Steady Flight, Climb & Glide 4.2 Theory of the Turn, Load Factor & Flight Envelope 4.3 Stall Physics, Critical Angle of Attack & High-Lift Devices 4.4 Autorotation, Spin Awareness & Recovery Procedures
5 Chapter 5: High-Speed Airflow
5.1 Speed of Sound, Mach Number & Flight Regimes 5.2 Critical Mach Number, Shock Waves & Compressibility Buffet 5.3 Sweepback Effects, Area Rule, Aerodynamic Heating & High-Speed Intakes
6 Chapter 6: Flight Stability & Dynamic Characteristics
6.1 Fundamentals of Static & Dynamic Stability 6.2 Longitudinal Stability & Centre of Gravity Limits 6.3 Lateral & Directional Stability Mechanisms 6.4 Interrelationship of Stability: Dutch Roll & Spiral Instability
6.2 Longitudinal Stability & Centre of Gravity Limits
Key Takeaways Explain This Topic AI
Longitudinal stability governs motion about the lateral (transverse) axis (pitching motion) and is primarily provided by the tailplane (horizontal stabilizer).
The Neutral Point (NP) is the aerodynamic center of the total aircraft; the distance between the CG and the NP defines the static margin.
Positioning the CG aft of the Neutral Point creates negative static longitudinal stability, resulting in an unmanageable pitch-divergent aircraft.
Forward CG placement increases longitudinal static stability, requiring greater downforce from the tailplane, higher trim drag, higher stall speed, and increased elevator control effort.
Long-period phugoid oscillations involve exchange between kinetic and potential energy at nearly constant angle of attack, whereas short-period pitching oscillations occur at rapidly changing angles of attack.
Last updated: July 2026
Longitudinal Stability & Centre of Gravity Limits
Longitudinal stability describes an aircraft's stability in pitch about its lateral (transverse) axis. Of the three rotational dimensions of flight, longitudinal stability is the most critical for pilot control and flight safety. It is directly controlled by aircraft design geometry and, crucially, by the location of the Centre of Gravity (CG) relative to the aircraft's aerodynamic center.
1. Forces and Moments in Pitch Equilibrium
In steady level flight, three main pitch moments act on the aircraft about its CG:
Wing Pitching Moment ( M a c M_{ac} M a c ) : Most cambered aerofoils exhibit a natural nose-down pitching moment about their aerodynamic center ( A C w i n g AC_{wing} A C w in g ), which remains relatively constant regardless of angle of attack.
Wing Lift Moment : The lift vector generated by the wing acts through A C w i n g AC_{wing} A C w in g . If the CG is located behind A C w i n g AC_{wing} A C w in g , wing lift creates a nose-up pitching moment; if the CG is ahead of A C w i n g AC_{wing} A C w in g , wing lift creates a nose-down moment.
Tailplane Moment : The horizontal tailplane (stabilizer) operates at an arm distance ( l t l_t l t ) behind the CG. On conventional aircraft, the tailplane generates downward lift (downforce) to counter the wing's nose-down pitching moment. ∑ M C G = M a c + L w i n g ⋅ ( x C G − x A C ) − L t a i l ⋅ l t = 0 \sum M_{CG} = M_{ac} + L_{wing} \cdot (x_{CG} - x_{AC}) - L_{tail} \cdot l_t = 0 ∑ M CG = M a c + L w in g ⋅ ( x CG − x A C ) − L t ai l ⋅ l t = 0 L_wing (Lift)
- ^
- |
- [Nose] ----------+----------[Tail]
- | |
- v v
- W (CG) L_tail (Downforce)
- The Tailplane Downwash Effect
As the main wing generates lift, it creates a downward deflection of airflow behind the trailing edge known as downwash ( ϵ \epsilon ϵ ). The horizontal tailplane operates within this downwash field. When the aircraft's angle of attack ( α \alpha α ) increases, downwash increases proportionally: α t a i l = α w i n g − i t a i l − ϵ \alpha_{tail} = \alpha_{wing} - i_{tail} - \epsilon α t ai l = α w in g − i t ai l − ϵ
Because downwash reduces the effective angle of attack seen by the tailplane, it reduces the restoring tail downforce increment. High-tail or T-tail configurations elevate the tailplane out of the main wing downwash field during normal flight, enhancing tailplane efficiency, but present risks during deep stall conditions.
2. The Neutral Point & Static Margin
The Neutral Point (NP) is defined as the aerodynamic center of the complete aircraft (wing, fuselage, and tailplane combined). It represents the position along the longitudinal axis where the net pitching moment coefficient is independent of the angle of attack ( d C m / d α = 0 dC_m/d\alpha = 0 d C m / d α = 0 ).
The relationship between the CG location ( x C G x_{CG} x CG ) and the Neutral Point ( x N P x_{NP} x NP ) dictates the degree of static longitudinal stability, quantified as the Static Margin (SM) : Static Margin = x N P − x C G MAC \text{Static Margin} = \frac{x_{NP} - x_{CG}}{\text{MAC}} Static Margin = MAC x NP − x CG
where MAC \text{MAC} MAC is the Mean Aerodynamic Chord. [Forward CG Limit] <---> [Aft CG Limit] <---> [Neutral Point]
- | | |
- Statically Minimum Safe dCm/dalpha = 0
- High Stability Static Margin (Neutral Stability)
Positive Static Margin ( x C G < x N P x_{CG} < x_{NP} x CG < x NP ) : The CG is located forward of the Neutral Point. The aircraft is statically stable ( d C m / d α < 0 dC_m/d\alpha < 0 d C m / d α < 0 ). Any increase in α \alpha α produces a nose-down restoring moment.
Zero Static Margin ( x C G = x N P x_{CG} = x_{NP} x CG = x NP ) : The CG lies exactly on the Neutral Point. The aircraft is neutrally stable ( d C m / d α = 0 dC_m/d\alpha = 0 d C m / d α = 0 ). Stick forces per g drop to zero.
Negative Static Margin ( x C G > x N P x_{CG} > x_{NP} x CG > x NP ) : The CG is loaded aft of the Neutral Point. The aircraft is statically unstable ( d C m / d α > 0 dC_m/d\alpha > 0 d C m / d α > 0 ). Any pitch disturbance causes continuous, self-amplifying pitch divergence.
Loading diagram... Longitudinal Force Distribution and Neutral Point
3. Forward vs. Aft CG Limits: Operational Trade-offs
Aircraft flight manuals enforce strict Forward and Aft CG boundaries. Operating outside these certified limits degrades safety and handling characteristics.
- Parameter Forward CG Limit Aft CG Limit
- Static Stability Maximum (Very stiff stability) Minimum / Marginal
Elevator Control Authority Heavy stick force required; limited flare authority Very light stick force; sensitive pitch reaction
Tailplane Load Heavy tail downforce required Minimal tail downforce
Trim Drag High (Wing must generate extra lift to balance tail downforce) Low (Reduced total wing lift required)
Stall Speed ( V s V_s V s ) Higher (Effective gross weight is increased by tail downforce) Lower (Tail downforce is reduced)
- Fuel Efficiency / Cruise Speed Reduced (Higher induced and trim drag) Increased (Lower total drag)
- Stall & Spin Recovery Rapid, effortless recovery Sluggish, difficult, or unrecoverable
- The EASA Exam Trap: CG and Stall Speed
A common Part-66 exam trap involves the effect of CG on stall speed:
Why does a forward CG increase stall speed? To balance the forward CG, the tailplane must push down harder. The main wing must produce enough lift to support both the aircraft's actual weight AND this downward tail load. Since the wing is carrying a heavier total aerodynamic load, it reaches its critical angle of attack ( α c r i t \alpha_{crit} α cr i t ) at a higher indicated airspeed ( V s V_s V s increases).
4. Dynamic Longitudinal Stability Modes
Longitudinal dynamic stability manifests in two distinct oscillatory modes that differ drastically in frequency and amplitude:
Short-Period Pitch Oscillation
Frequency : High frequency, short period ( T ≈ 1 to 3 seconds T \approx 1 \text{ to } 3 \text{ seconds} T ≈ 1 to 3 seconds ).
Characteristics : Characterized by rapid pitching motion about the CG with rapid changes in angle of attack ( α \alpha α ). Airspeed remains virtually constant during the brief motion.
Damping : Heavily damped by tailplane aerodynamic forces in a correctly designed aircraft. If un-damped, it can cause severe Pilot-Induced Oscillations (PIO) during precision maneuvering or landing flare.
Phugoid (Long-Period) Oscillation
Frequency : Very low frequency, long period ( T ≈ 20 to 100 seconds T \approx 20 \text{ to } 100 \text{ seconds} T ≈ 20 to 100 seconds ).
Characteristics : A slow, gradual trade between potential energy (altitude) and kinetic energy (airspeed). The aircraft pitches up, climbs, loses airspeed, pitches down, descends, gains airspeed, and repeats.
Angle of Attack : The angle of attack remains nearly constant throughout the entire phugoid wave.
Damping : Lightly damped by skin friction and parasite drag. Because the oscillation is so slow, pilots can effortlessly control or damp out a phugoid manually.