Study guide

5.2 Critical Mach Number, Shock Waves & Compressibility Buffet

EASA Part-66 Module 08 - Basic Aerodynamics Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Physics of the Atmosphere

1.1 International Standard Atmosphere (ISA) Datum & Atmospheric Layers 1.2 Atmospheric Pressure, Temperature, and Air Density Variations 1.3 Humidity, Dew Point, and Density Altitude Effects on Aircraft Performance

2 Chapter 2: Aerodynamics & Airflow Characteristics

2.1 Airflow Around Bodies & The Boundary Layer 2.2 Flow Phenomena: Upwash, Downwash, Wingtip Vortices & Stagnation Point 2.3 Aerofoil Geometry & Design Parameters

3 Chapter 3: Lift, Drag & Aerodynamic Forces

3.1 Bernoulli's Principle, Venturi Effect & Lift Generation 3.2 The Lift Equation & Lift Coefficient 3.3 Drag Components: Parasite, Profile & Induced Drag 3.4 The Total Drag Polar Curve & Maximum L/D Ratio

4 Chapter 4: Theory of Flight, Maneuvers & Stall Dynamics

4.1 Equilibrium of Forces in Steady Flight, Climb & Glide 4.2 Theory of the Turn, Load Factor & Flight Envelope 4.3 Stall Physics, Critical Angle of Attack & High-Lift Devices 4.4 Autorotation, Spin Awareness & Recovery Procedures

5 Chapter 5: High-Speed Airflow

5.1 Speed of Sound, Mach Number & Flight Regimes 5.2 Critical Mach Number, Shock Waves & Compressibility Buffet 5.3 Sweepback Effects, Area Rule, Aerodynamic Heating & High-Speed Intakes

6 Chapter 6: Flight Stability & Dynamic Characteristics

6.1 Fundamentals of Static & Dynamic Stability 6.2 Longitudinal Stability & Centre of Gravity Limits 6.3 Lateral & Directional Stability Mechanisms 6.4 Interrelationship of Stability: Dutch Roll & Spiral Instability

5.2 Critical Mach Number, Shock Waves & Compressibility Buffet

Key Takeaways Explain This Topic AI

Critical Mach number (Mcrit) is the freestream Mach at which local airflow somewhere on the aerofoil first reaches Mach 1 — typically on the upper surface near maximum thickness.

A shock wave is an abrupt, nearly discontinuous compression where supersonic flow decelerates to subsonic; normal shocks maximise pressure rise and drag, oblique shocks are weaker and angled to the flow.

Shock-induced boundary-layer separation creates wave drag, buffet, and a rearward shift of centre of pressure that can produce Mach tuck if uncorrected.

Compressibility buffet is an oscillatory separation behind a fluctuating shock on the wing; it warns the aircraft is operating near or beyond the buffet onset boundary.

Higher sweep, thinner sections, and lower cruise lift coefficient all raise Mcrit; supercritical aerofoils delay strong shocks to permit higher cruise Mach.

Last updated: July 2026

5.2 Critical Mach Number, Shock Waves & Compressibility Buffet

When a swept-wing jet accelerates toward cruise Mach, the wing does not need to fly at M = 1 for serious compressibility problems to begin. EASA Part-66 Module 08 requires you to understand critical Mach number , how shock waves form, and why compressibility buffet appears — because these set M M O M_{MO} M MO ​ , buffet margins, and Mach trim requirements on modern transports.

Critical Mach Number ( M c r i t M_{crit} M cr i t ​ )

Critical Mach number ( M c r i t M_{crit} M cr i t ​ ) is defined as the freestream Mach number at which the airflow first reaches Mach 1 at some point on the aerofoil surface — almost always on the upper (suction) side where the camber accelerates flow.

Below M c r i t M_{crit} M cr i t ​ : entirely subsonic surface flow; shocks absent.

At M c r i t M_{crit} M cr i t ​ : a sonic point appears (often near max thickness, ~30–40% chord).

Above M c r i t M_{crit} M cr i t ​ : a supersonic pocket forms on the upper surface, terminated by a shock wave .

  • Factor Effect on M c r i t M_{crit} M cr i t ​
  • Thicker aerofoil section Lowers M c r i t M_{crit} M cr i t ​ (stronger acceleration)
  • Higher angle of attack / C L C_L C L ​ Lowers M c r i t M_{crit} M cr i t ​ (more upper-surface suction)
  • Greater wing sweep Λ \Lambda Λ Raises M c r i t M_{crit} M cr i t ​ (see Section 5.3)
  • Supercritical aerofoil design Raises effective cruise Mach (weakens shock)

For a typical 1950s straight-wing section, M c r i t M_{crit} M cr i t ​ might be ~0.70. A modern supercritical section on a swept wing may permit cruise at M 0.82–0.86 because the shock is weaker and farther aft.

Shock Waves — Normal and Oblique

A shock wave is a thin region of extremely rapid compression where flow properties change almost discontinuously. Shocks form when supersonic flow must slow to subsonic conditions (e.g., at the downstream end of a supersonic pocket on a wing, or at a pitot intake lip). Freestream M < 1 Supersonic pocket on upper surface

  • | ___________
  • =====|=====> subsonic everywhere / \ supersonic region
  • | | | \
  • Wing surface | SHOCK → subsonic wake
  • Wing surface
  • Normal shock (M2 ≈ 1) Oblique shock (M2 may remain > 1)
  • | | /
  • ====>| |==== subsonic /====> turned flow
  • | | /
  • perpendicular angled to flow

Normal shock: Shock front perpendicular to flow. Large pressure, density, and temperature rise; velocity drops from supersonic to subsonic in one step. Maximum entropy rise — very high wave drag .

Oblique shock: Inclined at angle β \beta β to upstream flow. Weaker than a normal shock at the same upstream Mach; downstream flow may remain supersonic (weak oblique shock) or become subsonic (strong oblique shock).

Across any shock:

  • Static pressure , temperature , and density increase
  • Total pressure decreases (irreversible — energy lost to drag and heating)
  • Boundary layer may separate if adverse pressure gradient is severe
  • Wave Drag, Centre-of-Pressure Shift & Mach Tuck

The pressure jump across a shock adds a component of wave drag — drag unrelated to skin friction or induced drag. As Mach increases past M c r i t M_{crit} M cr i t ​ , wave drag rises sharply; the drag divergence Mach is where d C D / d M \mathrm{d}C_D/\mathrm{d}M d C D ​ / d M becomes steep.

Simultaneously, the centre of pressure (CP) on the wing moves aft because suction aft of the shock weakens and the shock-induced pressure rise acts predominantly on the rearward upper surface. This nose-down pitching tendency is called Mach tuck . Transport aircraft employ:

  • Mach trim systems (automatic stabiliser or THS input)
  • Swept wings and washout
  • Limiting M M O M_{MO} M MO ​ in the AFM

If Mach tuck is not trimmed and the aircraft accelerates beyond the approved envelope, dive tendency can intensify — a flight-test and certification concern, not merely academic theory.

Compressibility Buffet

Compressibility buffet (shock buffet) is an aerodynamic oscillation caused by intermittent shock-induced boundary-layer separation on the wing. The shock position moves forward and aft; the separated wake grows and collapses, producing vibrations felt in the fuselage and often registering on g meters.

Characteristics:

Onset near buffet onset boundary in the flight envelope — often a few hundredths of Mach below M M O M_{MO} M MO ​

  • Worsens at higher altitude (lower Reynolds number, thinner boundary layer)
  • Worsens at higher g or angle of attack (higher local suction)
  • Distinct from stall buffet (low speed, low Mach, wing-root separation)

Pilots use buffet as a tactile warning; engineers document buffet boundaries during certification. For maintenance, recurring buffet reports at normal cruise may indicate wing contamination (ice, damage, mis-rigged high-lift devices) or AFM exceedance — not something to dismiss as "turbulence."

Worked Example 5.2.1: Identifying M c r i t M_{crit} M cr i t ​ from Description

Problem: Flight test notes state: "At M 0.75, schlieren imaging shows entirely subsonic flow. At M 0.78, a local sonic point appears at 38% chord on the upper surface. At M 0.80, a terminated supersonic region and visible shock are present." What is M c r i t M_{crit} M cr i t ​ ?

Solution: M c r i t M_{crit} M cr i t ​ is the lowest freestream Mach where local M = 1 first appears — here M 0.78 . At M 0.80 the shock is fully formed, which is above M c r i t M_{crit} M cr i t ​ .

Worked Example 5.2.2: Buffet vs Stall

Problem: A B737 at FL 370 experiences moderate airframe rumble at M 0.82 and 1.25g in light turbulence. IAS is 245 kt; stall speed at this weight is 195 kt IAS. Is compressibility buffet plausible?

Solution: IAS is well above stall speed — stall buffet is unlikely. At FL 370, M 0.82 is near typical M M O M_{MO} M MO ​ for this class; high g increases local C L C_L C L ​ and lowers local M c r i t M_{crit} M cr i t ​ . Compressibility buffet is plausible — check AFM Mach/g envelope and whether the aircraft is at or above buffet onset.

Exam Traps

M c r i t M_{crit} M cr i t ​ is a freestream value , not the local peak Mach on the surface (which can be > 1 when M ∞ = M c r i t M_\infty = M_{crit} M ∞ ​ = M cr i t ​ ).

Shocks always increase static temperature — aerodynamic heating begins here (Section 5.3).

Buffet at high altitude/high Mach is not always stall — check Mach and g limits first.

Wave drag appears only with shocks , not in purely subsonic flow.

Mach tuck is a CP shift , not engine failure or CG movement — though it affects pitch trim loads on the tailplane.