Study guide
1.2 Atmospheric Pressure, Temperature, and Air Density Variations
EASA Part-66 Module 08 - Basic Aerodynamics Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Physics of the Atmosphere
1.1 International Standard Atmosphere (ISA) Datum & Atmospheric Layers 1.2 Atmospheric Pressure, Temperature, and Air Density Variations 1.3 Humidity, Dew Point, and Density Altitude Effects on Aircraft Performance
2 Chapter 2: Aerodynamics & Airflow Characteristics
2.1 Airflow Around Bodies & The Boundary Layer 2.2 Flow Phenomena: Upwash, Downwash, Wingtip Vortices & Stagnation Point 2.3 Aerofoil Geometry & Design Parameters
3 Chapter 3: Lift, Drag & Aerodynamic Forces
3.1 Bernoulli's Principle, Venturi Effect & Lift Generation 3.2 The Lift Equation & Lift Coefficient 3.3 Drag Components: Parasite, Profile & Induced Drag 3.4 The Total Drag Polar Curve & Maximum L/D Ratio
4 Chapter 4: Theory of Flight, Maneuvers & Stall Dynamics
4.1 Equilibrium of Forces in Steady Flight, Climb & Glide 4.2 Theory of the Turn, Load Factor & Flight Envelope 4.3 Stall Physics, Critical Angle of Attack & High-Lift Devices 4.4 Autorotation, Spin Awareness & Recovery Procedures
5 Chapter 5: High-Speed Airflow
5.1 Speed of Sound, Mach Number & Flight Regimes 5.2 Critical Mach Number, Shock Waves & Compressibility Buffet 5.3 Sweepback Effects, Area Rule, Aerodynamic Heating & High-Speed Intakes
6 Chapter 6: Flight Stability & Dynamic Characteristics
6.1 Fundamentals of Static & Dynamic Stability 6.2 Longitudinal Stability & Centre of Gravity Limits 6.3 Lateral & Directional Stability Mechanisms 6.4 Interrelationship of Stability: Dutch Roll & Spiral Instability
1.2 Atmospheric Pressure, Temperature, and Air Density Variations
Key Takeaways Explain This Topic AI
Atmospheric static pressure decreases with altitude non-linearly (exponentially), dropping by approximately 1 hPa per 30 feet in the lower troposphere.
The Ideal Gas Law (P = ρRT) governs the fundamental relationship between static pressure (P), air density (ρ), and absolute temperature (T), demonstrating that density varies directly with pressure and inversely with temperature.
Air density decreases exponentially with increasing altitude because static pressure drops faster with height than temperature decreases in the troposphere.
Pressure Altitude is the height above the standard 1013.25 hPa (29.92 inHg) pressure datum, calculated using barometric corrections when local altimeter settings differ from standard.
Temperature deviations from ISA (ΔISA) significantly shift actual atmospheric density from standard values, where warmer-than-standard air reduces density below ISA values.
Last updated: July 2026
1.2 Atmospheric Pressure, Temperature, and Air Density Variations
Having established the standard sea-level datum and atmospheric boundary layers in Section 1.1, we now examine how the core thermodynamic variables of air— static pressure ( P P P ) , absolute temperature ( T T T ) , and mass density ( ρ \rho ρ ) —interact and vary as an aircraft climbs through the troposphere. Master modern aircraft performance analysis requires an in-depth understanding of atmospheric state equations, non-linear pressure decay, barometric altimetry, and ISA temperature deviations ( Δ ISA \Delta\text{ISA} Δ ISA ).
Atmospheric Static Pressure Decay with Altitude
Static pressure ( P P P ) is the weight of ambient air exerted per unit surface area. Unlike liquids (which are essentially incompressible), air is a highly compressible gas. Consequently, the atmospheric mass distribution is non-uniform: air molecules at low altitudes are heavily compressed by the cumulative weight of all air layers above them.
As an aircraft ascends, the weight of the air column above it decreases. Therefore, ambient static pressure continuously decreases with increasing altitude. However, because air expands as pressure drops, pressure does not decay linearly —it drops exponentially. Altitude (ft)
- ^
- | | <- Low Density & Pressure (e.g. 36,000 ft: ~227 hPa)
- | /
- | / <- Exponential Pressure Decay Curve
- | /
- |/____ <- High Density & Pressure at Sea Level (1013.25 hPa)
- +------------------------------------------------------------> Static Pressure (hPa)
- Barometric Rule of Thumb Rates
In the lower levels of the troposphere (from sea level up to roughly 10 , 000 ft 10,000\text{ ft} 10 , 000 ft ), static pressure drops at an approximate rate of:
SI Units: ∼ 1 hPa (or mb) per 30 feet \sim 1\text{ hPa (or mb) per 30 feet} ∼ 1 hPa (or mb) per 30 feet of altitude gain ( 1 hPa ≈ 9.14 m 1\text{ hPa} \approx 9.14\text{ m} 1 hPa ≈ 9.14 m )
Imperial Units: ∼ 1.0 inHg per 1,000 feet \sim 1.0\text{ inHg per 1,000 feet} ∼ 1.0 inHg per 1,000 feet of altitude gain
As altitude increases beyond 10 , 000 ft 10,000\text{ ft} 10 , 000 ft , the rate of pressure drop slows dramatically because the remaining air above is thin. For example:
At 18 , 000 ft 18,000\text{ ft} 18 , 000 ft ( 5 , 500 m 5,500\text{ m} 5 , 500 m ), static pressure drops to approximately 506.6 hPa 506.6\text{ hPa} 506.6 hPa —roughly 50% (half) of sea-level pressure.
At 36 , 089 ft 36,089\text{ ft} 36 , 089 ft ( 11 , 000 m 11,000\text{ m} 11 , 000 m - Tropopause), static pressure drops to 226.3 hPa 226.3\text{ hPa} 226.3 hPa —less than 22.5% of sea-level pressure.
The Ideal Gas Law and Air Density
The relationship between atmospheric pressure, temperature, and mass density is rigorously defined by the Ideal Gas Equation of State (Equation of State for an ideal gas): P = ρ ⋅ R ⋅ T P = \rho \cdot R \cdot T P = ρ ⋅ R ⋅ T
Where:
P = Absolute Static Pressure (Pa = N/m 2 ) P = \text{Absolute Static Pressure (Pa} = \text{N/m}^2\text{)} P = Absolute Static Pressure (Pa = N/m 2 )
ρ = Air Mass Density (kg/m 3 ) \rho = \text{Air Mass Density (kg/m}^3\text{)} ρ = Air Mass Density (kg/m 3 )
R = Specific Gas Constant for Dry Air = 287.058 J/(kg ⋅ K) R = \text{Specific Gas Constant for Dry Air} = 287.058\text{ J/(kg}\cdot\text{K)} R = Specific Gas Constant for Dry Air = 287.058 J/(kg ⋅ K)
T = Absolute Temperature in Kelvin (K = ∘ C + 273.15 ) T = \text{Absolute Temperature in Kelvin (K} = {}^\circ\text{C} + 273.15\text{)} T = Absolute Temperature in Kelvin (K = ∘ C + 273.15 )
To isolate Air Density ( ρ \rho ρ ) , we rearrange the equation: ρ = P R ⋅ T \rho = \frac{P}{R \cdot T} ρ = R ⋅ T P
Core Thermodynamic Relationships:
Density vs. Pressure (Directly Proportional): If temperature T T T remains constant, an increase in pressure P P P compresses gas molecules together, increasing air density ρ \rho ρ . Conversely, a reduction in pressure causes air density to drop.
Density vs. Temperature (Inversely Proportional): If static pressure P P P remains constant, heating the air increases the kinetic velocity of its molecules. The gas expands, occupying a larger volume, which reduces air density ρ \rho ρ . Cold air is dense; hot air is sparse.
Combined Effect of Altitude on Density: As an aircraft climbs through the troposphere, both pressure ( P P P ) and temperature ( T T T ) decrease:
Decreasing P P P tends to reduce density.
Decreasing T T T tends to increase density.
Because static pressure drops exponentially while temperature decreases linearly, the pressure reduction far outweighs the temperature cooling effect . Consequently, air density continuous to decrease exponentially with increasing altitude throughout the atmosphere.
Barometric Altimetry and Pressure Altitude
Aircraft altimeters are aneroid barometers calibrated to the ISA pressure profile. An altimeter measures local static ambient pressure ( P s t a t P_{stat} P s t a t ) and translates it into an indicated altitude above a selected datum level.
Pressure Altitude ( P A PA P A )
Pressure Altitude ( P A PA P A ) is defined as the height above the standard ISA 1013.25 hPa 1013.25\text{ hPa} 1013.25 hPa ( 29.92 inHg 29.92\text{ inHg} 29.92 inHg ) pressure datum plane. It is the altitude indicated when an aircraft altimeter sub-scale is set exactly to 1013.25 hPa 1013.25\text{ hPa} 1013.25 hPa (Standard Altimeter Setting / QNE).
When local barometric pressure ( Q N H QNH QN H ) differs from standard ISA sea-level pressure ( 1013.25 hPa 1013.25\text{ hPa} 1013.25 hPa ), Pressure Altitude is calculated using the barometric correction formula: PA (ft) = Field Elevation (ft) + ( 1013.25 − QNH hPa ) × 30 \text{PA (ft)} = \text{Field Elevation (ft)} + \left( 1013.25 - \text{QNH}_{\text{hPa}} \right) \times 30 PA (ft) = Field Elevation (ft) + ( 1013.25 − QNH hPa ) × 30 Or in Inches of Mercury: PA (ft) = Field Elevation (ft) + ( 29.92 − QNH inHg ) × 1000 \text{Or in Inches of Mercury: } \text{PA (ft)} = \text{Field Elevation (ft)} + \left( 29.92 - \text{QNH}_{\text{inHg}} \right) \times 1000 Or in Inches of Mercury: PA (ft) = Field Elevation (ft) + ( 29.92 − QNH inHg ) × 1000
If QNH < 1013.25 hPa \text{QNH} < 1013.25\text{ hPa} QNH < 1013.25 hPa (Low pressure system), PA > Field Elevation \text{PA} > \text{Field Elevation} PA > Field Elevation .
If QNH > 1013.25 hPa \text{QNH} > 1013.25\text{ hPa} QNH > 1013.25 hPa (High pressure system), PA < Field Elevation \text{PA} < \text{Field Elevation} PA < Field Elevation .
ISA Temperature Deviation ( Δ ISA \Delta\text{ISA} Δ ISA )
Real-world atmospheric temperatures rarely match the theoretical + 15 ∘ C +15^\circ\text{C} + 1 5 ∘ C ISA baseline. The difference between actual Outside Air Temperature (OAT) and the calculated ISA standard temperature at a given altitude is expressed as the ISA Temperature Deviation ( Δ ISA \Delta\text{ISA} Δ ISA ) : Δ ISA ( ∘ C ) = OAT − T ISA \Delta\text{ISA} (^\circ\text{C}) = \text{OAT} - T_{\text{ISA}} Δ ISA ( ∘ C ) = OAT − T ISA
Δ ISA > 0 \Delta\text{ISA} > 0 Δ ISA > 0 (ISA Warm / ISA + X): Outside air is warmer than standard. Air density is lower than ISA standard density at that pressure altitude.
Δ ISA < 0 \Delta\text{ISA} < 0 Δ ISA < 0 (ISA Cold / ISA - X): Outside air is colder than standard. Air density is higher than ISA standard density at that pressure altitude.
- Worked Numerical Examples
- Worked Example 1.2.1: Verification of Standard Air Density using Ideal Gas Law
Problem: Using the Ideal Gas Law, verify the official ISA sea-level air density ρ 0 \rho_0 ρ 0 for dry air at standard conditions ( P 0 = 101 , 325 Pa P_0 = 101,325\text{ Pa} P 0 = 101 , 325 Pa , T 0 = + 15.0 ∘ C T_0 = +15.0^\circ\text{C} T 0 = + 15. 0 ∘ C ).
Solution Steps:
Convert temperature to Kelvin: T 0 = 15.0 + 273.15 = 288.15 K T_0 = 15.0 + 273.15 = 288.15\text{ K} T 0 = 15.0 + 273.15 = 288.15 K
Apply the rearranged Ideal Gas Law with R = 287.058 J/(kg ⋅ K) R = 287.058\text{ J/(kg}\cdot\text{K)} R = 287.058 J/(kg ⋅ K) : ρ 0 = P 0 R ⋅ T 0 = 101 , 325 287.058 × 288.15 \rho_0 = \frac{P_0}{R \cdot T_0} = \frac{101,325}{287.058 \times 288.15} ρ 0 = R ⋅ T 0 P 0 = 287.058 × 288.15 101 , 325 ρ 0 = 101 , 325 82 , 715.76 = 1.22497 kg/m 3 ≈ 1.2250 kg/m 3 \rho_0 = \frac{101,325}{82,715.76} = 1.22497\text{ kg/m}^3 \approx 1.2250\text{ kg/m}^3 ρ 0 = 82 , 715.76 101 , 325 = 1.22497 kg/m 3 ≈ 1.2250 kg/m 3
Result: The computed air density matches the official ISA standard value of 1.2250 kg/m 3 1.2250\text{ kg/m}^3 1.2250 kg/m 3 .
Worked Example 1.2.2: Pressure Altitude Calculation
Problem: An airfield is located at a geographical elevation of 4 , 200 ft 4,200\text{ ft} 4 , 200 ft . The local ATIS broadcast reports a QNH (sea level barometric setting) of 998.25 hPa 998.25\text{ hPa} 998.25 hPa . Calculate the airfield's Pressure Altitude.
Solution Steps:
Identify given parameters: Field Elevation = 4 , 200 ft = 4,200\text{ ft} = 4 , 200 ft , QNH = 998.25 hPa \text{QNH} = 998.25\text{ hPa} QNH = 998.25 hPa .
Calculate the barometric pressure delta from standard: Δ P = 1013.25 − 998.25 = 15.00 hPa \Delta P = 1013.25 - 998.25 = 15.00\text{ hPa} Δ P = 1013.25 − 998.25 = 15.00 hPa
Convert pressure delta to feet (using 30 ft/hPa 30\text{ ft/hPa} 30 ft/hPa ): Barometric Correction = 15.00 × 30 = + 450 ft \text{Barometric Correction} = 15.00 \times 30 = +450\text{ ft} Barometric Correction = 15.00 × 30 = + 450 ft
Add correction to field elevation: PA = 4 , 200 + 450 = 4 , 650 ft \text{PA} = 4,200 + 450 = 4,650\text{ ft} PA = 4 , 200 + 450 = 4 , 650 ft
Result: The Pressure Altitude of the airfield is 4 , 650 feet 4,650\text{ feet} 4 , 650 feet .
Worked Example 1.2.3: ISA Temperature Deviation ( Δ ISA \Delta\text{ISA} Δ ISA )
Problem: An aircraft is flying at FL 180 ( 18 , 000 ft 18,000\text{ ft} 18 , 000 ft ). The onboard static air temperature sensor indicates an Outside Air Temperature (OAT) of − 10.0 ∘ C -10.0^\circ\text{C} − 10. 0 ∘ C . Calculate Δ ISA \Delta\text{ISA} Δ ISA .
Solution Steps:
Compute ISA standard temperature at 18 , 000 ft 18,000\text{ ft} 18 , 000 ft : T ISA = 15.0 − ( 1.98 × 18 , 000 1000 ) = 15.0 − ( 1.98 × 18 ) = 15.0 − 35.64 = − 20.64 ∘ C T_{\text{ISA}} = 15.0 - \left( 1.98 \times \frac{18,000}{1000} \right) = 15.0 - (1.98 \times 18) = 15.0 - 35.64 = -20.64^\circ\text{C} T ISA = 15.0 − ( 1.98 × 1000 18 , 000 ) = 15.0 − ( 1.98 × 18 ) = 15.0 − 35.64 = − 20.6 4 ∘ C
Calculate Δ ISA \Delta\text{ISA} Δ ISA : Δ ISA = OAT − T ISA = − 10.0 ∘ C − ( − 20.64 ∘ C ) = + 10.64 ∘ C \Delta\text{ISA} = \text{OAT} - T_{\text{ISA}} = -10.0^\circ\text{C} - (-20.64^\circ\text{C}) = +10.64^\circ\text{C} Δ ISA = OAT − T ISA = − 10. 0 ∘ C − ( − 20.6 4 ∘ C ) = + 10.6 4 ∘ C
Result: Conditions are ISA + 10.64 ∘ C \text{ISA} + 10.64^\circ\text{C} ISA + 10.6 4 ∘ C (warm deviation).