Study guide
2.1 EDGE App Setup, Project Navigation & Inputs
GBCI EDGE Expert Certification Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: EDGE System Overview & Certification Levels
1.1 EDGE Fundamentals & IFC/GBCI Ecosystem 1.2 The EDGE Standard & Baseline Methodology 1.3 Certification Levels: EDGE Certified, Advanced & Zero Carbon
2 Chapter 2: EDGE App & Software Methodology
2.1 EDGE App Setup, Project Navigation & Inputs 2.2 Energy, Water & Materials Calculator Tabs 2.3 Financial Outputs, Payback & Methodology Reporting
3 Chapter 3: Bioclimatic & Passive Design Strategies
3.1 Climate-Responsive Building Orientation & Massing 3.2 Natural Ventilation, Cross-Ventilation & Ceiling Fans 3.3 Daylighting, Glazing Ratio & Shading Devices
4 Chapter 4: Energy Efficiency Measures & HVAC Systems
4.1 Building Envelope Thermal Performance 4.2 HVAC Systems, Cooling Efficiency & Controls 4.3 Lighting Efficiency & Smart Controls 4.4 Renewable Energy & Water Heating Systems
5 Chapter 5: Water Efficiency & Conservation Measures
5.1 Indoor Water Fixtures & Low-Flow Technologies 5.2 Rainwater Harvesting & Greywater Recycling Systems 5.3 Outdoor Irrigation & Blackwater Treatment
6 Chapter 6: Materials & Embodied Carbon Optimization
6.1 Embodied Energy & Embodied Carbon Fundamentals 6.2 Floor, Roof & External Wall Material Selection 6.3 Windows, Insulation & Customized Materials
7 Chapter 7: Certification Process, Roles & Verification
7.1 Professional Roles: EDGE Expert vs EDGE Auditor 7.2 Preliminary (Design) Certification Workflow 7.3 Post-Construction (As-Built) Certification & Zero Carbon
8 Chapter 8: Protocols, Governance, Ethics & Professional Conduct
8.1 EDGE Certification Protocols & Standard Guidelines 8.2 Professional Ethics, Conflict of Interest & Transparency 8.3 Stakeholder Communication & Client Advisory
9 Chapter 9: Green Building Fundamentals, Comfort & the Business Case
9.1 Thermal Comfort Fundamentals 9.2 Climate, Comfort & Bioclimatic Response 9.3 How Green Measures Interact Across Energy, Water & Materials 9.4 The Business Case for Green Buildings
10 Chapter 10: EDGE Building Types & Type-Specific Measures
10.1 EDGE Typologies, Sub-Typologies & Choosing the Right One 10.2 Type-Specific Base Cases & Saving Measures 10.3 Subprojects, Clustering & Non-Typical Projects
11 Chapter 11: Local Market Conditions, Regulation & the Base Case
11.1 Base Case Assumptions & the Standards Behind the Model 11.2 Climate, Resources & Adding a City Not in EDGE 11.3 Regulatory Authorities & Country-Specific Requirements 11.4 EDGE, Building Permits & Other Regulatory Systems
12 Chapter 12: EDGE Software Deep Dive — Comfort, Demand, Water & Outputs
12.1 Virtual Energy for Comfort 12.2 Overall Energy Demand: Delivered Energy, Fuels & End Uses 12.3 Base Case Water Use by Building Type & Matching Water Quality to Use 12.4 Default Data, Saving & Sharing Projects, Output Files & Feedback
13 Chapter 13: Professional Practice, Contracts & Accountability
13.1 Contracts Between the Client, Certifier, Expert & Auditor 13.2 Auditor Quality, Non-Performance & Certification Challenges 13.3 Maintaining EDGE Professional Status & Pricing Your Services
14 Chapter 14: Certification Logistics — Fees, Checklists & Records
14.1 Registration, Certification Fees & Means of Payment 14.2 Submission Requirements & the EDGE Checklist 14.3 Project Stages, Skipping Preliminary Certification & Pricing Iterations 14.4 Documentation Records, Retention & Certification Renewal
2.1 EDGE App Setup, Project Navigation & Inputs
Key Takeaways Explain This Topic AI
The EDGE App is a free, browser-based platform developed by IFC; EDGE v3 groups building typologies into three categories — Residential, Guest Accommodation and Non-Residential — and a Mixed Use subproject may only combine typologies from the same category.
Selecting the project location loads that city’s stored data: monthly average wet- and dry-bulb temperature, wind velocity and humidity, solar radiation intensity, annual average rainfall, grid carbon intensity, and average local energy and water costs.
Gross Internal Area (GIA in m²), occupant density, and operational hours serve as key geometric and operational input variables.
The software automatically calculates a localized Base Case baseline representing standard regional construction practices and building regulations.
Multi-building or mixed-use developments are modeled using subprojects, aggregating individual floor area typologies for area-weighted compliance evaluation.
Last updated: August 2026
2.1 EDGE App Setup, Project Navigation & Inputs
Quick Summary: The EDGE App ( edgebuildings.com ) is a free, web-based design and certification platform created by the International Finance Corporation (IFC). Upon entering a project's location, building typology, and operational parameters, the app dynamically loads localized climate data and regional construction baselines to generate a customized Base Case . Projects are evaluated against this baseline to establish energy, water, and material efficiency performance.
1. EDGE App Software Architecture & Ecosystem
The EDGE App is a cloud-based building software application developed by the International Finance Corporation (IFC) , a member of the World Bank Group. It provides a standardized, rapid, and quantifiable methodology for designing and certifying green buildings in over 170 countries.
Key Architectural Features
Zero-Install Web Access: Operates directly within standard web browsers at edgebuildings.com without requiring local software installation, license keys, or high-performance hardware.
Real-Time Computational Engine: Features an integrated building physics thermal engine and dynamic hydraulic modeling algorithms that recalculate overall energy, water, and materials performance instantaneously as inputs are modified.
Dual Functionality: Acts simultaneously as an early-stage bioclimatic design optimization tool for project teams and as the official submittal platform for GBCI certification reviews.
2. User Accounts, Dashboard & Project Stakeholder Roles
Access to the EDGE App requires a free user account. Within the platform, projects are managed on a centralized user dashboard. The software defines distinct access privileges based on team roles:
Stakeholder Role Primary Platform Responsibilities Platform Access Privileges
Project Owner / Client Initiates project file, assigns team members, pays registration/certification fees, holds ownership of certificate. Full administrative read/write access; fee payment portal access.
EDGE Expert Configures technical inputs, models efficiency measures, uploads submittal documentation, exports Methodology Report. Write access to design inputs and document upload portal.
EDGE Auditor Reviews locked submittal files, verifies uploaded audit evidence against design parameters, conducts site audits. Read-only audit access during submission; review & approval portal access.
GBCI Certification Body Conducts quality control audits, validates Auditor reports, issues Preliminary and Final EDGE Certificates. Administrative oversight and formal certificate issuance.
3. Location Selection & Climate Data Integration
The first step in project creation is defining the geographic location by selecting the Country and City/Region . For every city built into the software, EDGE holds a fixed set of location-specific values that drive the base case.
Loaded Location Parameters
Per the EDGE Methodology Report, the following location-specific information exists within EDGE for all cities built into the software:
Monthly average wet- and dry-bulb temperature: establishes the seasonal temperature profile that drives heating and cooling demand.
Monthly average outdoor wind velocity: feeds natural-ventilation and infiltration assumptions.
Monthly average outdoor humidity: governs latent cooling load and evaporative-cooling performance.
Solar radiation intensity: determines solar heat gain through glazing and the yield of solar water heating and photovoltaic systems.
Annual average rainfall: governs rainwater-harvesting yield in the Water tab.
Carbon dioxide intensity of the electricity grid: converts saved kilowatt-hours into avoided emissions.
Average cost of energy (by fuel type) and water: seeds the default tariffs behind the financial results.
Note the granularity: these are monthly averages and annual totals , not an hourly weather file. That is consistent with EDGE’s monthly quasi-steady-state calculation method (Section 1.2) and is why EDGE is explicitly not intended for system sizing or precise payback decisions.
Impact on Baseline Loads
Local climate data directly establishes the Heating Degree Days (HDD) and Cooling Degree Days (CDD) for the site. A project located in hot-humid Mumbai, India will generate a baseline dominated by space cooling and dehumidification loads, whereas a project in Bogota, Colombia will generate a baseline dominated by heating or passive thermal comfort boundaries.
4. Building Typology Selection & Operational Benchmarks
Selecting the typology is what tells EDGE which occupancy densities, operating schedules, internal load profiles and end uses to assume. EDGE v3 organises typologies into three categories , and the category matters operationally because a Mixed Use subproject may only combine typologies drawn from the same category:
- Category Typologies covered
- Residential Homes, Apartment
- Guest Accommodation Serviced Apartment, Hotel, Resort
- Non-Residential Retail, Industrial, Office, Healthcare, Education
Projects that span different categories must be submitted as separate subprojects — a hotel block and a warehouse cannot be merged into one model. Industrial buildings such as warehouses and light industry cannot form part of a Mixed Use subproject at all. Section 10.1 covers the sub-typologies (star rating for hotels, hospital type, school versus university, and so on) that further refine the base case.
Dynamic Base Case Generation
Upon selecting the typology, EDGE creates the Base Case (the standard baseline building). The Base Case is not a static international benchmark; it is dynamically generated based on local standard construction practices , local building energy codes, typical regional equipment efficiencies, and regional baseline utility consumption patterns.
5. Key Input Parameters & Data Entry Fields
To establish an accurate Base Case and Proposed Design baseline, the project team must input key geometric, operational, and financial data into the project setup tab:
Input Category Key Field Measurement Units Analytical Function in EDGE Engine
Geometry Gross Internal Area (GIA) Square Meters (m²) Scales total building volume, baseline energy kWh, baseline water m³, and material mass.
Geometry Number of Storeys Positive Integer Determines roof-to-floor area ratio, building height, and vertical wall envelope surface area.
Operations Operational Hours Hours/day & Days/week Governs HVAC runtime schedules, artificial lighting load duration, and internal equipment usage.
Occupancy Occupant Density m² per person (or total count) Determines internal sensible metabolic heat gains and daily indoor water fixture flush/flow events.
HVAC Setup Air-Conditioned Area % of total GIA Defines whether space cooling is calculated in the baseline and sets thermal comfort limits.
Tariffs Utility Tariffs $/kWh, $/m³, $/LPG unit Converts energy and water savings into monetary operational cost savings ($/year).
Grid Carbon Electricity Grid Carbon Intensity kg CO₂/kWh Converts kilowatt-hour energy savings into operational greenhouse gas emission reductions (tCO₂e/year).
6. Modeling Multi-Building & Mixed-Use Subprojects
For complex projects—such as a mixed-use development comprising a 15-storey residential tower, a 3-storey retail podium, and a 10-storey commercial office tower—the EDGE App provides a Subproject Module .
Subproject Navigation Steps
Create Master Project: Register the main development name on the project dashboard.
Add Subprojects: Define individual subprojects for each distinct building typology (e.g., Subproject A: Residential, Subproject B: Retail, Subproject C: Office).
Input Typology-Specific Data: Enter specific GIA, storey counts, operating schedules, and occupant densities for each subproject.
Area-Weighted Aggregation: The EDGE App automatically computes individual subproject savings and aggregates them into a master project compliance score using an area-weighted average calculation : Master Energy Savings (%) = ∑ ( Subproject GIA i × Subproject Energy Savings % i ) Total Master Project GIA \text{Master Energy Savings (\%)} = \frac{\sum \left( \text{Subproject GIA}_i \times \text{Subproject Energy Savings \%}_i \right)}{\text{Total Master Project GIA}} Master Energy Savings (%) = Total Master Project GIA ∑ ( Subproject GIA i × Subproject Energy Savings % i )
- 7. Practical Step-by-Step Project Setup Scenario
- Project Scenario
An EDGE Expert is registering a new 12,000 m² commercial office tower with 10 storeys located in Nairobi, Kenya .
Step-by-Step Workflow
Account Login & Creation: Log into edgebuildings.com , select "Create New Project", and enter project name: Nairobi Eco-Tower .
Location Configuration: Select Country: Kenya , City: Nairobi . The system loads Nairobi's stored monthly climate and resource values (high-altitude, temperate equatorial climate with modest heating and cooling demand) together with default local energy and water tariffs and grid carbon intensity.
Typology Selection: Select Typology: Commercial Office .
Geometric Inputs: Enter Gross Internal Area = 12,000 m², Number of Storeys = 10 , Storey Height = 3.5 meters.
Operational Hours & Occupancy: Enter Operational Hours = 10 hours/day, 5 days/week. Enter Occupant Density = 12 m² per person (1,000 total occupants).
Utility Tariff Setup: Enter local commercial electricity tariff = $0.18 /kWh and municipal water tariff = $1.50 /m³.
Baseline Verification: Review the generated Base Case baseline: EDGE displays standard baseline baseline specs (e.g., baseline window-to-wall ratio of 40%, baseline split AC COP of 3.0, baseline lighting power density of 11 W/m²).