Study guide

12.3 Base Case Water Use by Building Type & Matching Water Quality to Use

GBCI EDGE Expert Certification Exam Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: EDGE System Overview & Certification Levels

1.1 EDGE Fundamentals & IFC/GBCI Ecosystem 1.2 The EDGE Standard & Baseline Methodology 1.3 Certification Levels: EDGE Certified, Advanced & Zero Carbon

2 Chapter 2: EDGE App & Software Methodology

2.1 EDGE App Setup, Project Navigation & Inputs 2.2 Energy, Water & Materials Calculator Tabs 2.3 Financial Outputs, Payback & Methodology Reporting

3 Chapter 3: Bioclimatic & Passive Design Strategies

3.1 Climate-Responsive Building Orientation & Massing 3.2 Natural Ventilation, Cross-Ventilation & Ceiling Fans 3.3 Daylighting, Glazing Ratio & Shading Devices

4 Chapter 4: Energy Efficiency Measures & HVAC Systems

4.1 Building Envelope Thermal Performance 4.2 HVAC Systems, Cooling Efficiency & Controls 4.3 Lighting Efficiency & Smart Controls 4.4 Renewable Energy & Water Heating Systems

5 Chapter 5: Water Efficiency & Conservation Measures

5.1 Indoor Water Fixtures & Low-Flow Technologies 5.2 Rainwater Harvesting & Greywater Recycling Systems 5.3 Outdoor Irrigation & Blackwater Treatment

6 Chapter 6: Materials & Embodied Carbon Optimization

6.1 Embodied Energy & Embodied Carbon Fundamentals 6.2 Floor, Roof & External Wall Material Selection 6.3 Windows, Insulation & Customized Materials

7 Chapter 7: Certification Process, Roles & Verification

7.1 Professional Roles: EDGE Expert vs EDGE Auditor 7.2 Preliminary (Design) Certification Workflow 7.3 Post-Construction (As-Built) Certification & Zero Carbon

8 Chapter 8: Protocols, Governance, Ethics & Professional Conduct

8.1 EDGE Certification Protocols & Standard Guidelines 8.2 Professional Ethics, Conflict of Interest & Transparency 8.3 Stakeholder Communication & Client Advisory

9 Chapter 9: Green Building Fundamentals, Comfort & the Business Case

9.1 Thermal Comfort Fundamentals 9.2 Climate, Comfort & Bioclimatic Response 9.3 How Green Measures Interact Across Energy, Water & Materials 9.4 The Business Case for Green Buildings

10 Chapter 10: EDGE Building Types & Type-Specific Measures

10.1 EDGE Typologies, Sub-Typologies & Choosing the Right One 10.2 Type-Specific Base Cases & Saving Measures 10.3 Subprojects, Clustering & Non-Typical Projects

11 Chapter 11: Local Market Conditions, Regulation & the Base Case

11.1 Base Case Assumptions & the Standards Behind the Model 11.2 Climate, Resources & Adding a City Not in EDGE 11.3 Regulatory Authorities & Country-Specific Requirements 11.4 EDGE, Building Permits & Other Regulatory Systems

12 Chapter 12: EDGE Software Deep Dive — Comfort, Demand, Water & Outputs

12.1 Virtual Energy for Comfort 12.2 Overall Energy Demand: Delivered Energy, Fuels & End Uses 12.3 Base Case Water Use by Building Type & Matching Water Quality to Use 12.4 Default Data, Saving & Sharing Projects, Output Files & Feedback

13 Chapter 13: Professional Practice, Contracts & Accountability

13.1 Contracts Between the Client, Certifier, Expert & Auditor 13.2 Auditor Quality, Non-Performance & Certification Challenges 13.3 Maintaining EDGE Professional Status & Pricing Your Services

14 Chapter 14: Certification Logistics — Fees, Checklists & Records

14.1 Registration, Certification Fees & Means of Payment 14.2 Submission Requirements & the EDGE Checklist 14.3 Project Stages, Skipping Preliminary Certification & Pricing Iterations 14.4 Documentation Records, Retention & Certification Renewal

12.3 Base Case Water Use by Building Type & Matching Water Quality to Use

Key Takeaways Explain This Topic AI

EDGE estimates water use from the number of fixtures and from water usage loads — occupancy, usage rates and fixture flow rates — with base case patterns differing by building type.

Recycled water and rainwater harvested on site are deducted from the improved case and rendered as water savings, exactly as on-site renewables are treated in the energy category.

For greywater EDGE assumes all wastewater from kitchens and bathrooms is collected to meet toilet flushing demand, deducting only what is actually available if supply is insufficient.

For blackwater EDGE assumes 80% of wastewater from flushing toilets is collected, treated and stored for future flushing or other outdoor uses.

EDGE does not calculate water use for external activities such as car washing, and there is no international standard for building water calculation — the approach parallels the UK Water Efficiency Calculator for New Dwellings.

Last updated: August 2026

12.3 Base Case Water Use by Building Type & Matching Water Quality to Use

Exam Focus: Sub-topics 4.3.3 "Base case water use in each building type" and 4.3.4 "Water sources available, and the use of appropriate quality of water (mains-supplied, recovered, recycled, etc.)" are both named explicitly in the official outline and are commonly under-prepared.

How EDGE Builds Water Demand

The Methodology Report is candid that water is the simplest of the three categories to model and that no international standard governs it. The EDGE approach is described as similar to other calculators used around the world, such as the UK government's Water Efficiency Calculator for New Dwellings .

EDGE estimates annual water use through:

the number of water fixtures — showers, taps, toilets and so on, and

water usage loads — occupancy, usage rates, and the rate of water flow through the fixtures.

EDGE estimates fresh water use to determine overall consumption. Recycled water or rainwater harvested on site is then deducted from the improved case and rendered as water "savings" — structurally identical to how on-site renewable generation is handled in the energy category.

Why base case water differs by building type

The three inputs above are all typology-dependent:

Building type What drives base case water demand

Homes / Apartments Residents present morning and evening; showers, kitchen taps, laundry, WC. Income category sets assumed occupancy

Hotels / Resorts Guest showers and baths, laundry, kitchens, pools, landscape — very high per-occupant demand, scaled by star rating

Offices Short occupancy hours, WC and hand basin dominated, low per-occupant demand, no showers in the base case

Retail Large floor area, low occupant density, customer WC demand, some food service

Hospitals 24-hour occupancy, clinical hand hygiene, laundry, sterilisation — the highest intensity of the common types

Education Concentrated occupancy for part of the day, term-time only, WC dominated

The practical consequence: a water measure worth 12 percentage points in a hotel may be worth 3 in a warehouse. Prioritise measures against the end uses that actually dominate that typology's base case. Fitting premium low-flow showerheads to an office that has no showers achieves nothing.

EDGE v3 has made these end uses more explicit — a Water End Uses field was added to the Area and Loads Breakdown section of the Design Tab, a Bath Tub field was introduced for Homes and Apartments, and the swimming pool type list was extended to cover indoor and outdoor heated pools.

The Recovery Assumptions EDGE Applies

These three published assumptions are precise and examinable.

Rainwater harvesting

EDGE calculates the maximum quantity collectable using rainfall data for the location and the roof area from the design inputs:

Total annual rainwater = Catchment area (m²) × Rainfall depth (mm) × Filter coefficient (assuming 20% losses) × Runoff coefficient

Note there are two reduction factors, not one. The filter coefficient assumes 20% losses through filtration and first-flush diversion, and the runoff coefficient separately accounts for the roof surface. Candidates who apply only the runoff coefficient overestimate yield substantially.

Greywater recycling

EDGE calculates the potential supply and reduces the demand for flushing toilets by that amount. EDGE assumes that all wastewater from kitchens and bathrooms is collected and stored to meet the demand for flushing toilets. If the quantity of wastewater is insufficient, then EDGE simply deducts the wastewater available from the total demand.

So greywater is credited against toilet flushing demand , and the credit is capped by whichever is smaller — the greywater available or the flushing demand. Oversizing a greywater plant beyond flushing demand yields no additional EDGE credit.

Blackwater treatment

EDGE calculates the potential supply and reduces the demand for flushing toilets by that amount. EDGE assumes that most of the wastewater (80%) from flushing toilets is collected, treated and stored to meet the demand for future flushing or other outdoor uses.

The 80% figure is the number to remember, and the distinction from greywater is the source: greywater comes from kitchens and bathrooms, blackwater from toilet flushing itself.

What EDGE Deliberately Excludes

EDGE does not calculate water use for external activities such as car washing. This matters when a client asks to claim a water-efficient car wash facility: it is good practice, and it is outside the EDGE water boundary. Setting that expectation early avoids an awkward conversation at Design Audit.

Matching Water Quality to Use

Sub-topic 4.3.4 asks about the appropriate quality of water for each use. The governing principle is that potable water is an expensively treated product and should be reserved for uses that require potability.

  • Water source Typical quality Appropriate uses
  • Mains-supplied potable Drinking quality Drinking, cooking, hand basins, showers, food preparation

Harvested rainwater Clean but not potable without treatment Toilet flushing, irrigation, cooling tower make-up, general washdown

  • Recovered / treated greywater Non-potable, treated Toilet flushing, sub-surface irrigation
  • Treated blackwater Non-potable, more heavily treated Toilet flushing, restricted outdoor uses
  • The engineering and regulatory constraints

Dual plumbing is mandatory. Non-potable supply must run in a physically separate, clearly identified pipework system with no cross-connection to the potable network. Mis-labelled or cross-connected pipework is a public health failure, not a documentation defect.

Local health regulation governs permissible uses. Some jurisdictions prohibit greywater reuse for surface irrigation of edible crops or for uses with human contact. Confirm the local rule before modelling the measure — this is exactly the country-specific requirement discussed in Section 11.3.

Match treatment level to end use. Sub-surface drip irrigation tolerates a lower treatment standard than unrestricted surface irrigation.

The Expert's sequencing rule

Work in this order: first reduce demand at the fixture, then match quality to use by substituting non-potable sources for non-potable demands, and only then consider treatment-intensive recovery. Reducing demand is cheaper, has no ongoing operational cost, and cannot fail an audit because a treatment plant was not commissioned.