Study guide

1.2 The EDGE Standard & Baseline Methodology

GBCI EDGE Expert Certification Exam Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: EDGE System Overview & Certification Levels

1.1 EDGE Fundamentals & IFC/GBCI Ecosystem 1.2 The EDGE Standard & Baseline Methodology 1.3 Certification Levels: EDGE Certified, Advanced & Zero Carbon

2 Chapter 2: EDGE App & Software Methodology

2.1 EDGE App Setup, Project Navigation & Inputs 2.2 Energy, Water & Materials Calculator Tabs 2.3 Financial Outputs, Payback & Methodology Reporting

3 Chapter 3: Bioclimatic & Passive Design Strategies

3.1 Climate-Responsive Building Orientation & Massing 3.2 Natural Ventilation, Cross-Ventilation & Ceiling Fans 3.3 Daylighting, Glazing Ratio & Shading Devices

4 Chapter 4: Energy Efficiency Measures & HVAC Systems

4.1 Building Envelope Thermal Performance 4.2 HVAC Systems, Cooling Efficiency & Controls 4.3 Lighting Efficiency & Smart Controls 4.4 Renewable Energy & Water Heating Systems

5 Chapter 5: Water Efficiency & Conservation Measures

5.1 Indoor Water Fixtures & Low-Flow Technologies 5.2 Rainwater Harvesting & Greywater Recycling Systems 5.3 Outdoor Irrigation & Blackwater Treatment

6 Chapter 6: Materials & Embodied Carbon Optimization

6.1 Embodied Energy & Embodied Carbon Fundamentals 6.2 Floor, Roof & External Wall Material Selection 6.3 Windows, Insulation & Customized Materials

7 Chapter 7: Certification Process, Roles & Verification

7.1 Professional Roles: EDGE Expert vs EDGE Auditor 7.2 Preliminary (Design) Certification Workflow 7.3 Post-Construction (As-Built) Certification & Zero Carbon

8 Chapter 8: Protocols, Governance, Ethics & Professional Conduct

8.1 EDGE Certification Protocols & Standard Guidelines 8.2 Professional Ethics, Conflict of Interest & Transparency 8.3 Stakeholder Communication & Client Advisory

9 Chapter 9: Green Building Fundamentals, Comfort & the Business Case

9.1 Thermal Comfort Fundamentals 9.2 Climate, Comfort & Bioclimatic Response 9.3 How Green Measures Interact Across Energy, Water & Materials 9.4 The Business Case for Green Buildings

10 Chapter 10: EDGE Building Types & Type-Specific Measures

10.1 EDGE Typologies, Sub-Typologies & Choosing the Right One 10.2 Type-Specific Base Cases & Saving Measures 10.3 Subprojects, Clustering & Non-Typical Projects

11 Chapter 11: Local Market Conditions, Regulation & the Base Case

11.1 Base Case Assumptions & the Standards Behind the Model 11.2 Climate, Resources & Adding a City Not in EDGE 11.3 Regulatory Authorities & Country-Specific Requirements 11.4 EDGE, Building Permits & Other Regulatory Systems

12 Chapter 12: EDGE Software Deep Dive — Comfort, Demand, Water & Outputs

12.1 Virtual Energy for Comfort 12.2 Overall Energy Demand: Delivered Energy, Fuels & End Uses 12.3 Base Case Water Use by Building Type & Matching Water Quality to Use 12.4 Default Data, Saving & Sharing Projects, Output Files & Feedback

13 Chapter 13: Professional Practice, Contracts & Accountability

13.1 Contracts Between the Client, Certifier, Expert & Auditor 13.2 Auditor Quality, Non-Performance & Certification Challenges 13.3 Maintaining EDGE Professional Status & Pricing Your Services

14 Chapter 14: Certification Logistics — Fees, Checklists & Records

14.1 Registration, Certification Fees & Means of Payment 14.2 Submission Requirements & the EDGE Checklist 14.3 Project Stages, Skipping Preliminary Certification & Pricing Iterations 14.4 Documentation Records, Retention & Certification Renewal

1.2 The EDGE Standard & Baseline Methodology

Key Takeaways Explain This Topic AI

The EDGE standard requires a minimum 20% reduction in operational energy, 20% in operational water, and 20% in embodied energy in materials compared to a virtual baseline model.

Virtual baseline buildings match the proposed project in shape, orientation, floor area, and occupancy, but apply standard local building codes and market practices.

EDGE assesses annual space heating and cooling using a monthly quasi-steady-state method based on the European CEN standards and ISO 13790 — deliberately not an hour-by-hour dynamic simulation.

Operational energy savings are expressed in Energy Use Intensity (kWh/m²/year), while water performance is measured in liters per person per day or annual cubic meters.

Embodied energy in materials measures cradle-to-gate primary energy demand (MJ/m²) for structural slabs, walls, roofs, and window assemblies.

Last updated: August 2026

1.2 The EDGE Standard & Baseline Methodology

Exam Focus: Understanding how EDGE establishes location-specific baselines, how the virtual reference building is generated, and how calculations work across the three resource categories—Operational Energy, Operational Water, and Embodied Energy in Materials—is central to passing the EDGE Expert Exam.

The foundational principle of the EDGE green building system is quantitative performance benchmarking . Unlike point-based green building rating systems that reward points for specific design features, EDGE requires projects to demonstrate measurable percentage reductions against a localized virtual reference model.

The Core 20/20/20 Rule

To achieve basic EDGE Certification , a project must achieve a minimum threshold of 20% resource reduction across three distinct environmental pillars compared to a local baseline building: Minimum EDGE Threshold = { 20 % Operational Energy Reduction 20 % Operational Water Reduction 20 % Embodied Energy Reduction in Materials \text{Minimum EDGE Threshold} = \begin{cases} \mathbf{20\%} & \text{Operational Energy Reduction} \\ \mathbf{20\%} & \text{Operational Water Reduction} \\ \mathbf{20\%} & \text{Embodied Energy Reduction in Materials} \end{cases} Minimum EDGE Threshold = ⎩ ⎨ ⎧ ​ 20% 20% 20% ​ Operational Energy Reduction Operational Water Reduction Embodied Energy Reduction in Materials ​

Every project must hit or exceed 20% in all three categories simultaneously. A project that achieves 50% energy savings and 40% water savings, but only 18% embodied energy savings in materials, fails to achieve EDGE Certification until the materials threshold reaches 20%.

Baseline Methodology: How Local Baselines Are Created

A key innovation of EDGE is its automated baseline calculation engine. Rather than applying one international energy code uniformly worldwide, EDGE establishes location-specific, typology-specific baselines tailored to over 170 countries and thousands of individual cities.

Baseline Determination Factors

The EDGE baseline algorithms aggregate multiple data sources to reflect standard local building practices:

Local Building Regulations & Energy Codes : Standard municipal building codes, national energy efficiency regulations, and regional water standards.

Market Common Practice Data : Empirical data gathered by IFC research teams representing typical construction methods in a given country (e.g., single-pane clear glass vs. tinted glass, uninsulated brick walls vs. insulated concrete blocks).

Location-Specific Climate & Resource Data : For every city built into the software, EDGE stores monthly average wet- and dry-bulb temperature, monthly average outdoor wind velocity, monthly average outdoor humidity, solar radiation intensity, annual average rainfall, the carbon dioxide intensity of the electricity grid, and the average local cost of energy (by fuel type) and water.

Standard Operational Schedules & Occupancy Densities : Preset occupancy levels ( m 2 / person m^2/\text{person} m 2 / person ), internal heat gains from people and appliances, daily operating hours, and indoor thermostat setpoints based on building typology.

The Virtual Reference Building Model

When an EDGE Expert creates a project in the EDGE App, the software automatically constructs a Virtual Reference Building (Baseline Model) behind the scenes.

Principles of the Virtual Reference Model

Identical Geometry & Orientation : The baseline building has the exact same footprint, total floor area, floor-to-floor height, window-to-wall ratio (WWR), and compass orientation as the proposed project.

Baseline Property Assignment : The baseline building is assigned standard local performance values for envelope thermal transmittance (U-value in W / m 2 K W/m^2K W / m 2 K ), Solar Heat Gain Coefficient (SHGC), equipment efficiency (COP/EER), lighting power density ( W / m 2 W/m^2 W / m 2 ), fixture flow rates, and standard construction materials. Percentage Savings (%) = ( Baseline Consumption − Proposed Consumption Baseline Consumption ) × 100 \text{Percentage Savings (\%)} = \left( \frac{\text{Baseline Consumption} - \text{Proposed Consumption}}{\text{Baseline Consumption}} \right) \times 100 Percentage Savings (%) = ( Baseline Consumption Baseline Consumption − Proposed Consumption ​ ) × 100

  • The Three Resource Dimensions Detailed
  • 1. Operational Energy

Operational energy measures the electrical and thermal energy consumed during building operation.

Units of Measurement : Energy Use Intensity (EUI), expressed in kilowatt-hours per square meter per year ( kWh / m 2 / year \text{kWh}/m^2/\text{year} kWh / m 2 / year ).

Evaluated Systems :

Building Envelope : Roof insulation, wall insulation, low-E glazing U-value, Solar Heat Gain Coefficient (SHGC), external shading devices (overhangs, fins, louvers), and Window-to-Wall Ratio (WWR).

HVAC Systems : Coefficient of Performance (COP) or Energy Efficiency Ratio (EER) of cooling systems, seasonal efficiency of boilers/heaters, variable speed drives (VSDs), and energy recovery ventilation (ERV).

Lighting & Controls : Lighting Power Density (LPD in W / m 2 W/m^2 W / m 2 ), LED efficacy, motion/occupancy sensors, daylight harvesting controls.

On-Site Renewables : Solar Photovoltaic (PV) arrays, solar thermal hot water systems.

2. Operational Water

Operational water measures total potable water consumed by occupants and building systems.

Units of Measurement : Liters per person per day ( L/person/day \text{L/person/day} L/person/day ) or annual cubic meters ( m 3 / year m^3/\text{year} m 3 / year ).

Evaluated Measures :

Sanitary Fixtures : Low-flow showerheads ( L/min \text{L/min} L/min ), low-flow kitchen/faucet aerators ( L/min \text{L/min} L/min ), dual-flush toilets ( L/flush \text{L/flush} L/flush ), waterless or ultra-low-flow urinals.

Water Recycling & Reuse : Greywater collection and treatment for toilet flushing and irrigation; rainwater harvesting systems.

HVAC Water Consumption : Evaporative cooling tower efficiency or switching from water-cooled to air-cooled chillers.

3. Embodied Energy in Materials

Embodied energy quantifies the total primary energy consumed during the cradle-to-gate lifecycle phase of building materials—including raw material extraction, processing, manufacturing, and transport to the factory gate.

Units of Measurement : Megajoules per square meter of gross floor area ( MJ / m 2 \text{MJ}/m^2 MJ / m 2 ) or embodied carbon equivalent ( kg CO 2 e / m 2 \text{kg CO}_2\text{e}/m^2 kg CO 2 ​ e / m 2 ).

Evaluated Structural & Envelope Assemblies :

Floor slabs (e.g., solid concrete slab vs. post-tensioned slab vs. timber floor).

Roof construction (e.g., heavy concrete roof vs. insulated steel sheet roof).

External walls (e.g., solid concrete block vs. autoclaved aerated concrete [AAC] vs. hollow clay bricks).

Internal partitions (e.g., brick masonry vs. drywall with timber/steel studs).

Window frames (e.g., aluminum without thermal break vs. thermally broken aluminum vs. UPVC/timber).

Insulation materials.

Step-by-Step EDGE App Interface Workflow

To perform a baseline calculation and evaluate measures, the EDGE Expert follows a systematic workflow in the EDGE App:

Workflow Step Screen / Module Key Actions & Input Parameters

Step 1: Project Setup Location & Typology Select Country, City, Project Name, Building Typology, Sub-type, Gross Internal Area ( m 2 m^2 m 2 ), Number of Floors.

Step 2: Key Inputs Geometry & Envelope Enter Window-to-Wall Ratio (WWR), floor height, orientation, glass SHGC, glass U-value, wall construction type.

Step 3: Energy Measures Energy Tab Check proposed efficiency measures (e.g., higher COP AC, LED lighting, solar PV system capacity in kWp).

Step 4: Water Measures Water Tab Input fixture specifications (showerhead flow rate in L/min, toilet flush volumes, greywater reuse system).

Step 5: Materials Measures Materials Tab Select specific floor, roof, wall, and glazing assemblies from the dropdown list of material choices.

Step 6: Dashboard Review Summary & Results Review real-time gauge indicators showing % savings in Energy, Water, and Materials, EUI, and Financial Payback.

Loading diagram... Virtual Baseline vs. Proposed Building Model Comparison