Study guide
5.2 Rainwater Harvesting & Greywater Recycling Systems
GBCI EDGE Expert Certification Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: EDGE System Overview & Certification Levels
1.1 EDGE Fundamentals & IFC/GBCI Ecosystem 1.2 The EDGE Standard & Baseline Methodology 1.3 Certification Levels: EDGE Certified, Advanced & Zero Carbon
2 Chapter 2: EDGE App & Software Methodology
2.1 EDGE App Setup, Project Navigation & Inputs 2.2 Energy, Water & Materials Calculator Tabs 2.3 Financial Outputs, Payback & Methodology Reporting
3 Chapter 3: Bioclimatic & Passive Design Strategies
3.1 Climate-Responsive Building Orientation & Massing 3.2 Natural Ventilation, Cross-Ventilation & Ceiling Fans 3.3 Daylighting, Glazing Ratio & Shading Devices
4 Chapter 4: Energy Efficiency Measures & HVAC Systems
4.1 Building Envelope Thermal Performance 4.2 HVAC Systems, Cooling Efficiency & Controls 4.3 Lighting Efficiency & Smart Controls 4.4 Renewable Energy & Water Heating Systems
5 Chapter 5: Water Efficiency & Conservation Measures
5.1 Indoor Water Fixtures & Low-Flow Technologies 5.2 Rainwater Harvesting & Greywater Recycling Systems 5.3 Outdoor Irrigation & Blackwater Treatment
6 Chapter 6: Materials & Embodied Carbon Optimization
6.1 Embodied Energy & Embodied Carbon Fundamentals 6.2 Floor, Roof & External Wall Material Selection 6.3 Windows, Insulation & Customized Materials
7 Chapter 7: Certification Process, Roles & Verification
7.1 Professional Roles: EDGE Expert vs EDGE Auditor 7.2 Preliminary (Design) Certification Workflow 7.3 Post-Construction (As-Built) Certification & Zero Carbon
8 Chapter 8: Protocols, Governance, Ethics & Professional Conduct
8.1 EDGE Certification Protocols & Standard Guidelines 8.2 Professional Ethics, Conflict of Interest & Transparency 8.3 Stakeholder Communication & Client Advisory
9 Chapter 9: Green Building Fundamentals, Comfort & the Business Case
9.1 Thermal Comfort Fundamentals 9.2 Climate, Comfort & Bioclimatic Response 9.3 How Green Measures Interact Across Energy, Water & Materials 9.4 The Business Case for Green Buildings
10 Chapter 10: EDGE Building Types & Type-Specific Measures
10.1 EDGE Typologies, Sub-Typologies & Choosing the Right One 10.2 Type-Specific Base Cases & Saving Measures 10.3 Subprojects, Clustering & Non-Typical Projects
11 Chapter 11: Local Market Conditions, Regulation & the Base Case
11.1 Base Case Assumptions & the Standards Behind the Model 11.2 Climate, Resources & Adding a City Not in EDGE 11.3 Regulatory Authorities & Country-Specific Requirements 11.4 EDGE, Building Permits & Other Regulatory Systems
12 Chapter 12: EDGE Software Deep Dive — Comfort, Demand, Water & Outputs
12.1 Virtual Energy for Comfort 12.2 Overall Energy Demand: Delivered Energy, Fuels & End Uses 12.3 Base Case Water Use by Building Type & Matching Water Quality to Use 12.4 Default Data, Saving & Sharing Projects, Output Files & Feedback
13 Chapter 13: Professional Practice, Contracts & Accountability
13.1 Contracts Between the Client, Certifier, Expert & Auditor 13.2 Auditor Quality, Non-Performance & Certification Challenges 13.3 Maintaining EDGE Professional Status & Pricing Your Services
14 Chapter 14: Certification Logistics — Fees, Checklists & Records
14.1 Registration, Certification Fees & Means of Payment 14.2 Submission Requirements & the EDGE Checklist 14.3 Project Stages, Skipping Preliminary Certification & Pricing Iterations 14.4 Documentation Records, Retention & Certification Renewal
5.2 Rainwater Harvesting & Greywater Recycling Systems
Key Takeaways Explain This Topic AI
Annual rainwater harvesting yield is calculated using Y = P x A x C x eta, where P is annual rainfall (mm), A is catchment area (m²), C is runoff coefficient (e.g., 0.90 for metal roofs), and eta is filter efficiency (typically 0.85-0.90).
Greywater is defined as wastewater from washbasins, showers, bathtubs, and laundries, strictly excluding blackwater from toilets and kitchen sinks containing fats, oils, grease, and heavy pathogens.
Primary non-potable end uses for treated greywater and harvested rainwater in EDGE include toilet and urinal flushing, cooling tower makeup, and landscape irrigation.
Rainwater storage tanks are typically sized to capture 5% of annual harvested rainfall or maintain 14 to 21 days of peak dry-season non-potable water demand.
EDGE auditing for greywater and rainwater systems requires dual-pipe system schematics (purple pipe standard), tank volume calculations, pump specs, and backflow prevention air gaps.
Last updated: August 2026
5.2 Rainwater Harvesting & Greywater Recycling Systems
Exam Focus: Mastering rainwater yield calculations, catchment runoff coefficients, greywater vs. blackwater source differentiation, dual-pipe hydraulic design, and storage tank sizing logic is vital for the EDGE Expert Exam.
While installing low-flow indoor fixtures reduces overall water demand, achieving advanced water performance—such as 40% to 50%+ operational water savings—frequently requires substitution of potable municipal water with alternative non-potable water sources. Rainwater Harvesting (RWH) and Greywater Recycling Systems (GWRS) are two primary strategies evaluated within the EDGE software to meet non-potable end-use demands such as toilet flushing, urinal flushing, cooling tower makeup, and outdoor irrigation.
Rainwater Harvesting Principles & Catchment Mechanics
Rainwater harvesting involves collecting, filtering, storing, and distributing precipitation runoff from building roofs and impervious hardscape surfaces.
Roof Surface Runoff Coefficients ( C C C )
The volume of rainwater collected depends heavily on the surface material of the catchment area. Different roofing materials absorb or retain varying amounts of rainfall.
- Catchment Material Runoff Coefficient ( C C C ) Characteristics & Water Quality Impact
- Metal Roofing (Steel/Aluminum) 0.90 - 0.95 Smooth, impervious surface; high yield; low pollutant contamination
- Glazed Tiles / Concrete Tiles 0.80 - 0.85 Good yield; minor absorption loss in porous tile joints
- Concrete Roof (Smooth/Paved) 0.70 - 0.80 Moderate absorption; potential dirt/dust accumulation
- Asphalt Shingle / Bitumen 0.60 - 0.70 Rough texture absorbs initial rain; potential leachates
Intensive / Extensive Green Roof 0.30 - 0.50 High substrate moisture retention; lowers peak runoff but reduces harvestable volume
First-Flush Diversion & Filtration
Initial rainfall washes accumulated airborne dust, bird droppings, foliage debris, and heavy metals off the catchment surface. To protect storage tanks and filtration systems, a first-flush diverter automatically isolates and discards the first 1.0 to 2.0 mm of rainfall before directing clean water to the main storage vessel. Typical mechanical filter efficiency ( η \eta η ) ranges between 0.85 and 0.90 (85% to 90%).
Rainwater Harvesting Calculation Equations
1. Annual Harvestable Rainwater Yield Equation Annual Yield ( Y in Liters ) = P × A × C × η \text{Annual Yield } (Y \text{ in Liters}) = P \times A \times C \times \eta Annual Yield ( Y in Liters ) = P × A × C × η Annual Yield ( Y in m 3 ) = P × A × C × η 1 , 000 \text{Annual Yield } (Y \text{ in } m^3) = \frac{P \times A \times C \times \eta}{1,000} Annual Yield ( Y in m 3 ) = 1 , 000 P × A × C × η
Where:
- P P P = Annual precipitation (mm/year)
- A A A = Roof catchment footprint area ( m 2 m^2 m 2 )
- C C C = Runoff coefficient (dimensionless, 0.0 to 1.0)
- η \eta η = First-flush and filter efficiency factor (dimensionless, typically 0.85)
- 2. Rainwater Tank Sizing Rules of Thumb
In EDGE modeling and sustainable plumbing design, storage tanks are sized using two standard engineering methods:
Percent Yield Method : Size storage tank capacity to hold 5% of total annual harvestable yield ( V t a n k = 0.05 × Y a n n u a l V_{tank} = 0.05 \times Y_{annual} V t ank = 0.05 × Y ann u a l ).
Dry-Season Security Method : Size storage capacity to supply 14 to 21 days of peak dry-season non-potable demand ( V t a n k = Daily Non-Potable Demand × 14 to 21 days V_{tank} = \text{Daily Non-Potable Demand} \times 14 \text{ to } 21 \text{ days} V t ank = Daily Non-Potable Demand × 14 to 21 days ).
Greywater Recycling Technologies & Source Segregation
Greywater refers to untreated wastewater generated from domestic personal hygiene and laundry activities. It contains significantly lower organic loads and pathogen concentrations than blackwater.
Source Stream Categorization
Source Classification Included Drainage Fixtures Contaminants Present Treatment Suitability
Light Greywater Washbasin faucets, bathroom showers, bathtubs Soap, hair, traces of body oil, micro-solids Excellent for compact biological / MBR treatment
Dark Greywater Washing machines, laundry tubs Detergents, lint, surfactants, bleaching agents Requires coarse screening & equalization
Blackwater (EXCLUDED) Toilets, urinals, kitchen sinks, dishwashers High organic matter (BOD/COD), pathogens, FOG Strictly prohibited in standard greywater systems
Greywater Treatment Process Stages
Modern greywater recycling plants utilize multi-stage treatment to produce clear, odor-free non-potable water compliant with international reuse standards (e.g., BOD < 10 mg/L < 10 \text{ mg/L} < 10 mg/L , TSS < 10 mg/L < 10 \text{ mg/L} < 10 mg/L , Turbidity < 2 NTU < 2 \text{ NTU} < 2 NTU , E. coli < 10 CFU / 100 mL < 10 \text{ CFU}/100 \text{ mL} < 10 CFU /100 mL ):
Pre-Screening & Equalization : Coarse lint strainers and sedimentation tanks remove hair, lint, and gross particulates while balancing peak morning flow surges.
Biological Oxidation (MBR / MBBR) : Membrane Bioreactors (MBR) or Moving Bed Biofilm Reactors (MBBR) utilize beneficial aerobic bacteria to digest dissolved organic compounds.
Ultrafiltration & Disinfection : Microfiltration membranes (0.04 micron pore size) remove suspended solids and bacteria, followed by Ultraviolet (UV) light disinfection and residual chlorination to prevent bio-fouling in storage tanks.
Integrated Non-Potable Water Balance Math in EDGE
In the EDGE App, non-potable recycled water cannot exceed total non-potable building demand. The water balance equation enforced by EDGE is: Usable Recycled Volume = min ( Supply R a i n + G r e y w a t e r , Demand F l u s h i n g + I r r i g a t i o n + C o o l i n g ) \text{Usable Recycled Volume} = \min \left( \text{Supply}_{Rain + Greywater}, \quad \text{Demand}_{Flushing + Irrigation + Cooling} \right) Usable Recycled Volume = min ( Supply R ain + G rey w a t er , Demand Fl u s hin g + I rr i g a t i o n + C oo l in g ) Net Potable Water Savings (%) = ( Baseline Potable Demand − ( Proposed Potable Demand − Usable Recycled Volume ) Baseline Potable Demand ) × 100 \text{Net Potable Water Savings (\%)} = \left( \frac{\text{Baseline Potable Demand} - (\text{Proposed Potable Demand} - \text{Usable Recycled Volume})}{\text{Baseline Potable Demand}} \right) \times 100 Net Potable Water Savings (%) = ( Baseline Potable Demand Baseline Potable Demand − ( Proposed Potable Demand − Usable Recycled Volume ) ) × 100
Dual-Pipe Plumbing Architecture & Regulatory Compliance
To safely distribute recycled greywater or harvested rainwater throughout a building, plumbing codes mandate a dedicated dual-pipe plumbing system .
Critical Engineering Standards
Color-Coded Piping (Purple Pipe) : Non-potable distribution pipes must be color-coded purple (Pantone 512C or RAL 4001) or continuously stenciled with warning labels: "CAUTION: NON-POTABLE WATER - DO NOT DRINK" .
Physical Air-Gap Backflow Protection : Municipal backup potable water connections to rainwater or greywater day tanks MUST feature an approved physical air gap (minimum twice the diameter of the supply pipe, never less than 25 mm) above the overflow rim to eliminate cross-contamination risk.
Dual Riser Isolation : Potable water lines and non-potable purple pipe risers must run in separate chases or maintain minimum physical clearances.
Evidence Documentation & On-Site Audit Verification
During the EDGE audit process, the Auditor verifies greywater and rainwater interventions using technical submittals:
Hydraulic Calculation Sheet : Signed engineer calculations showing rainfall yield, greywater supply volumes, non-potable flush/irrigation demand, and storage tank sizing.
Plumbing Schematic & Riser Diagrams : Full MEP drawings highlighting dual-piping distribution networks, treatment plant layout, pump specs, and backflow air gap details.
Equipment Cut Sheets : Technical spec sheets for greywater treatment plants (MBR/MBBR capacities in m 3 / d a y m^3/day m 3 / d a y ), UV disinfection dosage ( m J / c m 2 mJ/cm^2 m J / c m 2 ), and rainwater filtration equipment.
On-Site Inspection : Physical verification of purple piping, treatment plant installation, tank capacity nameplates, and operational testing of automated backup supply valves.