Study guide

2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))

EPA Lead Risk Assessor 40 CFR 745 Subpart L

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Regulatory Framework & Statutory Authority

1.1 TSCA Title IV, Title X, and EPA Regulatory Authority 1.2 40 CFR 745 Subpart L: Scope, Target Housing, and Child-Occupied Facilities 1.3 Lead Certification Roles: Inspector vs. Risk Assessor vs. Abatement Supervisor 1.4 HUD Lead Safe Housing Rule (24 CFR Part 35) & TSCA Section 1018 Disclosure

2 Chapter 2: Hazard Identification & Visual Assessment

2.1 Visual Inspection Protocols and Paint Condition Rating (Intact, Fair, Deteriorated) 2.2 Evaluating Friction, Impact, and Chewable Surface Hazards 2.3 XRF Analyzer Operating Principles, Performance Characteristic Sheets (PCS), and Inconclusive Ranges 2.4 Paint Chip Sampling Protocol, Laboratory Submissions, and Paint Presumptions 2.5 Background Information Collection for Risk Assessments 2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))

3 Chapter 3: Dust and Soil Sampling Protocols

3.1 ASTM E1728 Dust Wipe Sampling Protocols, Materials, Spikes, and Field Blanks 3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels 3.3 ASTM E1727 Soil Sampling Protocols, Composite Sub-sampling, and Core Depths 3.4 Soil-Lead Hazard Thresholds (Play Areas vs. Bare Soil) and Action Triggers 3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food

4 Chapter 4: Laboratory Quality Control & Chain of Custody

4.1 NLLAP Laboratory Accreditation & Approved Analytical Methods (AAS, ICP-AES) 4.2 Field Quality Control: Blank Preparation, Field Duplicates, and Acceptance Criteria 4.3 Chain of Custody (COC) Documentation, Sample Handling, and Shipping Regulations 4.4 Interpreting Laboratory Data, Reconciling QC Failures, and Data Validation

5 Chapter 5: Lead Hazard Control Recommendations

5.1 Regulatory Definitions: Interim Controls vs. Abatement Strategies 5.2 Paint Hazard Control Options: Encapsulation, Enclosure, and Surface Modifications 5.3 Dust and Soil Hazard Controls: Specialized Cleaning, Cover Options, and Removal 5.4 Re-evaluation Intervals, Maintenance Schedules, and Monitoring Plans

6 Chapter 6: Risk Assessment Report & Compliance

6.1 Mandatory Report Components under 40 CFR 745.227(d)(11) and HUD Chapter 5 6.2 Hazard Prioritization, Risk Reduction Action Plans, and Client Communication 6.3 Recordkeeping Regulations, Document Retention (3-Year Rule), and Audit Readiness 6.4 State-Authorized Lead Programs, Local Variations, and Reciprocity Rules

2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))

Key Takeaways Explain This Topic AI

A lead hazard screen may be conducted only by a certified risk assessor under 40 CFR 745.227(c).

Screens require background information, a visual inspection to find deteriorated paint and at least two dust-sampling locations, testing of deteriorated paint in poor condition with distinct painting histories, and composite dust sampling.

In residential dwellings, collect two composite dust samples—one from floors and one from windows—in rooms/hallways/stairwells where children under 6 are most likely to contact dust; multi-family/COF screens also sample child-use common areas.

The screen report includes the risk-assessment report elements in 745.227(d)(11)(i)–(xiv) plus background information, but excludes (d)(11)(xv)–(xviii); it must recommend a follow-up full risk assessment when warranted.

A lead hazard screen is a limited evaluation—not a substitute for a full risk assessment when comprehensive hazard characterization and prioritized control options are required.

Last updated: July 2026

2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))

A lead hazard screen is a limited on-site evaluation used to decide whether a property is unlikely to have lead-based paint hazards or whether a full risk assessment is warranted. Under 40 CFR 745.227(c)(1) , only a person certified as an EPA (or authorized-program) risk assessor may conduct a lead hazard screen.

Screen vs. Full Risk Assessment

  • Element Lead Hazard Screen (745.227(c)) Full Risk Assessment (745.227(d))
  • Who may perform Certified risk assessor only Certified risk assessor only

Paint testing focus Deteriorated paint in poor condition with distinct painting histories Friction/impact deteriorated surfaces and other deteriorated paint per (d)(4)

Dust sampling Two composites (floors + windows) in child-use areas; plus common areas in multi-family/COF More comprehensive floor and sill sampling (composite or single-surface)

Soil sampling Not the core screen protocol focus in (c) Soil sampling in play areas, driplines, and bare yard areas as specified in (d)

Report contents (d)(11)(i)–(xiv) + background; excludes (d)(11)(xv)–(xviii); may recommend follow-up RA Full (d)(11)(i)–(xviii), including hazard descriptions and prioritized controls

  • Mandatory Screen Sequence
  • 1. Background information — 745.227(c)(2)(i)

Collect the same style of building/occupant-use background required for risk assessments: physical characteristics and use patterns that may expose children under 6.

  • 2. Visual inspection — 745.227(c)(2)(ii)
  • Determine whether deteriorated paint is present
  • Locate at least two dust sampling locations
  • 3. Paint testing — 745.227(c)(2)(iii)

If deteriorated paint is present, test each surface that is in poor condition and has a distinct painting history , using documented methodologies (XRF and/or paint-chip laboratory analysis with QC).

4. Dust sampling — 745.227(c)(2)(iv)–(v)

Residential dwellings: collect two composite dust samples :

One composite from floors

One composite from windows in rooms, hallways, or stairwells where children under 6 are most likely to contact dust.

Multi-family dwellings and child-occupied facilities: in addition to the floor and window composites above, collect composite dust samples from common areas where children under 6 are most likely to contact dust.

All dust samples must use documented methodologies with adequate QC and must be analyzed by a recognized laboratory under 745.227(f) for quantifiable lead results.

Interpreting Screen Results

Because on/after January 12, 2026 a dust-lead hazard is any reportable level on floors/sills, screen dust detections are highly informative. Historically, many programs used conservative screen decision rules (for example recommending a full risk assessment when screen dust loadings were elevated relative to then-current numeric standards). Under the current rule, the regulatory text requires the screen report to include recommendations, if warranted, for a follow-up risk assessment and further actions. In practice:

Reportable dust-lead on floor or window composites supports recommending a full risk assessment and interim cleaning discussion

Multiple deteriorated LBP surfaces support expanding to full risk-assessment paint/dust/soil characterization

"Clean" non-detect dust composites with no deteriorated LBP may support a conclusion that hazards are unlikely—but document limitations of the limited screen scope

Screen Report Contents — 745.227(c)(5)

The lead hazard screen report must include:

  • Information required in a risk assessment report under (d)(11)(i) through (d)(11)(xiv)
  • Background information collected under (c)(2)(i)
  • Exclude (d)(11)(xv) through (d)(11)(xviii) from the screen report template
  • Recommendations, if warranted, for a follow-up risk assessment and other appropriate actions

Exam trap: Do not claim that a hazard screen authorizes skipping certified-risk-assessor status, soil evaluation forever, or full report recommendations when a follow-up risk assessment is clearly warranted.

When Clients Choose a Screen

Screens are often selected for:

  • Pre-purchase limited evaluations when parties want a fast indicator
  • Portfolio triage before funding full risk assessments
  • Situations where deteriorated paint and dust evidence are expected to be minimal

If the client needs prioritized interim-control vs. abatement options, encapsulant monitoring schedules, or comprehensive soil characterization, commission a full risk assessment instead of stopping at a screen.

Worked Screen Scenario

Property: 1952 single-family target housing; one 3-year-old resident. Screen actions:

Interview confirms child plays in living room and rear bedroom; chews living-room sill.

Visual inspection finds deteriorated paint on living-room sill and bedroom window trough area; selects those rooms plus hallway for dust locations.

XRF/paint-chip testing confirms LBP on the deteriorated sill.

Collects one floor composite (living room + bedroom + hallway floors) and one window composite (living-room and bedroom sills) using documented wipe methods and QC blanks.

NLLAP results show reportable lead on both composites.

Conclusion: Recommend a full risk assessment and discuss interim specialized cleaning / sill treatment options pending the fuller evaluation. The screen report cites 745.227(c)(5) follow-up recommendations and includes items (d)(11)(i)–(xiv) plus background notes.

  • Documentation Pitfalls
  • Labeling a full risk assessment as a "screen" to reduce scope
  • Omitting common-area composites in multi-family/COF screens
  • Mixing floor and window wipes into one illegal composite
  • Claiming screens may be performed by inspectors-only credentials