Study guide

3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels

EPA Lead Risk Assessor 40 CFR 745 Subpart L

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Regulatory Framework & Statutory Authority

1.1 TSCA Title IV, Title X, and EPA Regulatory Authority 1.2 40 CFR 745 Subpart L: Scope, Target Housing, and Child-Occupied Facilities 1.3 Lead Certification Roles: Inspector vs. Risk Assessor vs. Abatement Supervisor 1.4 HUD Lead Safe Housing Rule (24 CFR Part 35) & TSCA Section 1018 Disclosure

2 Chapter 2: Hazard Identification & Visual Assessment

2.1 Visual Inspection Protocols and Paint Condition Rating (Intact, Fair, Deteriorated) 2.2 Evaluating Friction, Impact, and Chewable Surface Hazards 2.3 XRF Analyzer Operating Principles, Performance Characteristic Sheets (PCS), and Inconclusive Ranges 2.4 Paint Chip Sampling Protocol, Laboratory Submissions, and Paint Presumptions 2.5 Background Information Collection for Risk Assessments 2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))

3 Chapter 3: Dust and Soil Sampling Protocols

3.1 ASTM E1728 Dust Wipe Sampling Protocols, Materials, Spikes, and Field Blanks 3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels 3.3 ASTM E1727 Soil Sampling Protocols, Composite Sub-sampling, and Core Depths 3.4 Soil-Lead Hazard Thresholds (Play Areas vs. Bare Soil) and Action Triggers 3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food

4 Chapter 4: Laboratory Quality Control & Chain of Custody

4.1 NLLAP Laboratory Accreditation & Approved Analytical Methods (AAS, ICP-AES) 4.2 Field Quality Control: Blank Preparation, Field Duplicates, and Acceptance Criteria 4.3 Chain of Custody (COC) Documentation, Sample Handling, and Shipping Regulations 4.4 Interpreting Laboratory Data, Reconciling QC Failures, and Data Validation

5 Chapter 5: Lead Hazard Control Recommendations

5.1 Regulatory Definitions: Interim Controls vs. Abatement Strategies 5.2 Paint Hazard Control Options: Encapsulation, Enclosure, and Surface Modifications 5.3 Dust and Soil Hazard Controls: Specialized Cleaning, Cover Options, and Removal 5.4 Re-evaluation Intervals, Maintenance Schedules, and Monitoring Plans

6 Chapter 6: Risk Assessment Report & Compliance

6.1 Mandatory Report Components under 40 CFR 745.227(d)(11) and HUD Chapter 5 6.2 Hazard Prioritization, Risk Reduction Action Plans, and Client Communication 6.3 Recordkeeping Regulations, Document Retention (3-Year Rule), and Audit Readiness 6.4 State-Authorized Lead Programs, Local Variations, and Reciprocity Rules

3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels

Key Takeaways Explain This Topic AI

On or after January 12, 2026, a dust-lead hazard under 40 CFR 745.65(b) is any reportable level of lead on floors or interior window sills as analyzed by an NLLAP-recognized laboratory (not a fixed 10/100 µg/ft² numeric hazard standard).

On or after January 12, 2026, dust-lead action levels (post-abatement clearance) under 40 CFR 745.227 are 5 µg/ft² for floors, 40 µg/ft² for interior window sills, and 100 µg/ft² for window troughs.

Reportable-but-below-action-level dust is still a hazard; EPA recommends HEPA/damp-cleaning best practices rather than abatement based solely on that dust loading, while loadings at or above action levels support an abatement recommendation.

Composite clearance samples are compared to the action level divided by half the number of subsamples (for N=4 floors: 5 ÷ 2 = 2.5 µg/ft²).

When clearance results are below action levels but at or above any reportable level, EPA still classifies residual dust-lead as a hazard and requires the prescribed dust-lead hazard statement in the abatement documentation.

Last updated: July 2026

3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels

Federal dust-lead rules under 40 CFR 745.65 (hazard identification) and 40 CFR 745.227 (work practices / post-abatement testing) changed on January 12, 2026 . Today's exam candidates work after that compliance date, so the current federal baseline is the post-January 12, 2026 rule. Pre-2026 numbers remain historically important for interpreting older reports and some transition-period questions.

EPA's October 2024 final rule also updated terminology: what was formerly called the dust-lead hazard standard is now framed as the dust-lead reportable level (DLRL) concept for hazard determinations, and what was formerly called the dust-lead clearance level is now the dust-lead action level (DLAL) used for post-abatement pass/fail decisions.

1. Hazard Standard vs. Action Level (Clearance)

Concept Regulatory Role Current Rule (on/after Jan 12, 2026)

Dust-lead hazard / reportable level Identifies an actionable lead-based paint dust hazard during risk assessment / determinations Any reportable level of lead on floors or interior window sills (NLLAP laboratory result)

Dust-lead action level Maximum dust loading allowed to pass post-abatement / post-control dust testing 5 µg/ft² floors; 40 µg/ft² interior window sills; 100 µg/ft² window troughs

A property can therefore pass clearance (below action levels) while still having a dust-lead hazard under the any-reportable-level definition if laboratory results remain quantifiable above the lab's reporting limit. EPA requires a specific residual-hazard statement in that situation (see §7 below).

2. Effective-Date Timeline (Memorize Both Eras)

Surface Hazard before Jan 12, 2026 Hazard on/after Jan 12, 2026 Action level before Jan 12, 2026 Action level on/after Jan 12, 2026

  • Floors (carpeted & hard) ≥ 10 µg/ft² Any reportable level 10 µg/ft² 5 µg/ft²
  • Interior window sills ≥ 100 µg/ft² Any reportable level 100 µg/ft² 40 µg/ft²

Window troughs Not a separate numeric hazard standard in 745.65(b) Not a separate numeric hazard standard in 745.65(b) 400 µg/ft² 100 µg/ft²

Exam trap: Do not recite 10/100/400 as the "current" federal clearance numbers after January 12, 2026. Those are the pre-effective-date action levels. Current action levels are 5 / 40 / 100 µg/ft² .

The October 2024 final rule also discarded advocacy proposals that floated fixed screening numbers such as 3/20/25 µg/ft². Those figures were not adopted as federal hazard standards; the adopted hazard definition is any reportable level .

3. How Hazard Determinations Changed on January 12, 2026

Before the compliance date, risk assessors commonly evaluated floors and interior window sills against fixed numeric thresholds, often using the weighted arithmetic mean lead loading for each surface type when summarizing multiple samples. On or after January 12, 2026:

Any single-surface or composite floor or interior window-sill sample at or above any NLLAP-reportable level is a dust-lead hazard.

The old "mean of floors ≥ 10 µg/ft²" style decision rule is not the current federal hazard test.

Window troughs still matter for clearance/action-level decisions, but 745.65(b) does not create a separate trough hazard numeric standard the way it does for floors and sills.

This is why laboratory reporting limits and NLLAP recognition matter more than ever: "reportable" is defined by what an EPA-recognized laboratory can validly report on the wipe sample.

4. Practical Risk-Assessor Decision Framework

Use dust results in three bands after January 12, 2026:

Dust loading result (floors / sills) Hazard status Typical recommendation posture

Non-detect / below lab reportable level No dust-lead hazard under 745.65(b) Continue evaluating paint and soil hazards; maintain good housekeeping

Reportable, but below action level (5 / 40 µg/ft²) Dust-lead hazard present EPA does not recommend abatement based solely on that dust loading; recommend best practices such as HEPA vacuuming furniture/items and regular damp cleaning of hard surfaces

At or above action level (5 / 40 / 100 µg/ft² as applicable) Dust-lead hazard present and action-level trigger met EPA recommends abatement (or equivalent hazard-control intensity required by the governing program) and post-control dust testing must clear below action levels

Key point for the exam: hazard identification and abatement recommendation intensity are related but not identical after the 2024/2026 rule. Reportable dust is a hazard; action levels drive when EPA recommends abatement based on dust loadings and when post-abatement clearance is complete.

Additional practical implications:

Sampling still matters. ASTM E1728 wipe methods, measured areas, field blanks, and NLLAP analysis remain mandatory. "Any reportable level" does not mean "skip quantitative sampling."

Reporting limit sensitivity. Laboratories must report at a limit of detection/reporting limit low enough to support the any-reportable-level determination. Assessors should verify the lab's reporting limit on the analytical report.

Clearance remains a numeric pass/fail. After abatement or interim-control cleaning, wipe results must be below the 5/40/100 action levels (single-surface comparison, or composite rules in 745.227).

Friction-surface paint hazards still link to dust. Under 745.65(a)(1), lead-based paint on a friction surface is a paint-lead hazard when the nearest horizontal surface underneath has dust-lead at or above the dust-lead hazard levels in 745.65(b). After January 12, 2026, that means any reportable dust on the nearest floor or sill can complete that paint-hazard finding.

5. Visual Inspection Prerequisite

Under 40 CFR 745.227, dust wipe clearance sampling cannot begin until a visual inspection passes:

  • Specified hazard-control work is complete
  • No deteriorated paint remains in the work area
  • No visible dust, paint chips, or construction debris on floors, sills, troughs, or ledges

If visible debris is present, the area fails visually; the contractor must re-clean (typically HEPA / wet wash / HEPA) before another visual check. Never collect "hopeful" clearance wipes over visible debris—those results are invalid for clearance decisions.

6. Single-Surface vs. Composite Evaluation

Composite wipe rules still apply (same component type, same unit, typically 2–4 subsamples). Mixing component types in one tube (for example, a floor wipe plus a sill wipe) is prohibited.

For post-abatement action-level decisions under 40 CFR 745.227(e)(8)(vii), compare:

  • Single-surface result directly to the applicable action level, or
  • Composite result to the applicable action level divided by half the number of subsamples in the composite
  • Worked Examples (Post-2026 Floor Clearance)

Current floor action level = 5 µg/ft² .

  • Subsamples (N) Half of N Composite comparison threshold (5 ÷ N/2)
  • 2 1 5.0 µg/ft²
  • 3 1.5 ≈ 3.3 µg/ft²
  • 4 2 2.5 µg/ft²

Example: a four-wipe hard-floor composite reports 3.0 µg/ft² . The composite fails because 3.0 ≥ 2.5. Represented floor components must be re-cleaned and retested. A single-surface floor wipe at 4.8 µg/ft² would pass the numeric action-level test (below 5), but if that 4.8 µg/ft² is reportable, it is still a dust-lead hazard under 745.65(b) and triggers residual-hazard documentation when it appears in a post-abatement package.

7. Residual Dust-Lead Hazard Statement

On or after January 12, 2026, when post-abatement dust results are below action levels and at or above reportable levels , 40 CFR 745.227 requires the abatement documentation to include EPA's dust-lead hazard statement. In substance, the statement explains that:

clearance action levels were met, so the abatement can be considered complete for dust-action-level purposes; and

residual dust-lead hazards remain because any reportable dust-lead is a hazard; and

continued exposure reduction practices (for example, HEPA vacuuming returned furnishings and regular damp cleaning) are recommended, consistent with EPA's Protect Your Family From Lead in Your Home pamphlet guidance.

Candidates should remember the logic even if they do not memorize the full regulatory paragraph: cleared ≠ hazard-free under the post-2026 any-reportable-level definition.

8. Scope and HUD / State Overlay

These dust standards apply to target housing and child-occupied facilities under 40 CFR Part 745 Subpart D. HUD Lead Safe Housing Rule projects and authorized state/tribal programs may impose additional or more protective requirements, but they cannot be less protective than EPA's federal baseline. Always confirm which jurisdiction and funding stream governs the property before selecting the decision table for recommendations and before telling a client that a unit is "clear."