Study guide

3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food

EPA Lead Risk Assessor 40 CFR 745 Subpart L

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Regulatory Framework & Statutory Authority

1.1 TSCA Title IV, Title X, and EPA Regulatory Authority 1.2 40 CFR 745 Subpart L: Scope, Target Housing, and Child-Occupied Facilities 1.3 Lead Certification Roles: Inspector vs. Risk Assessor vs. Abatement Supervisor 1.4 HUD Lead Safe Housing Rule (24 CFR Part 35) & TSCA Section 1018 Disclosure

2 Chapter 2: Hazard Identification & Visual Assessment

2.1 Visual Inspection Protocols and Paint Condition Rating (Intact, Fair, Deteriorated) 2.2 Evaluating Friction, Impact, and Chewable Surface Hazards 2.3 XRF Analyzer Operating Principles, Performance Characteristic Sheets (PCS), and Inconclusive Ranges 2.4 Paint Chip Sampling Protocol, Laboratory Submissions, and Paint Presumptions 2.5 Background Information Collection for Risk Assessments 2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))

3 Chapter 3: Dust and Soil Sampling Protocols

3.1 ASTM E1728 Dust Wipe Sampling Protocols, Materials, Spikes, and Field Blanks 3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels 3.3 ASTM E1727 Soil Sampling Protocols, Composite Sub-sampling, and Core Depths 3.4 Soil-Lead Hazard Thresholds (Play Areas vs. Bare Soil) and Action Triggers 3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food

4 Chapter 4: Laboratory Quality Control & Chain of Custody

4.1 NLLAP Laboratory Accreditation & Approved Analytical Methods (AAS, ICP-AES) 4.2 Field Quality Control: Blank Preparation, Field Duplicates, and Acceptance Criteria 4.3 Chain of Custody (COC) Documentation, Sample Handling, and Shipping Regulations 4.4 Interpreting Laboratory Data, Reconciling QC Failures, and Data Validation

5 Chapter 5: Lead Hazard Control Recommendations

5.1 Regulatory Definitions: Interim Controls vs. Abatement Strategies 5.2 Paint Hazard Control Options: Encapsulation, Enclosure, and Surface Modifications 5.3 Dust and Soil Hazard Controls: Specialized Cleaning, Cover Options, and Removal 5.4 Re-evaluation Intervals, Maintenance Schedules, and Monitoring Plans

6 Chapter 6: Risk Assessment Report & Compliance

6.1 Mandatory Report Components under 40 CFR 745.227(d)(11) and HUD Chapter 5 6.2 Hazard Prioritization, Risk Reduction Action Plans, and Client Communication 6.3 Recordkeeping Regulations, Document Retention (3-Year Rule), and Audit Readiness 6.4 State-Authorized Lead Programs, Local Variations, and Reciprocity Rules

3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food

Key Takeaways Explain This Topic AI

40 CFR 745.225(d)(2) requires risk-assessor training on environmental lead sources beyond paint—including surface dust, soil, water, air, packaging, and food—and on sampling for other sources of lead exposure.

Paint, dust, and soil are the core media for EPA lead-based paint risk assessments in target housing/COFs, but assessors must recognize when water, occupational take-home dust, consumer products, or food/packaging pathways may explain exposure.

Lead in drinking water is commonly associated with lead service lines, lead solder, and brass fixtures; first-draw and flushed sampling protocols differ from ASTM dust/soil methods and are often coordinated with water utilities or public-health agencies.

Airborne lead is primarily an occupational/OSHA concern during disturbance; risk assessors still note visible dust-generation pathways that can settle as household dust hazards.

When non-paint sources are suspected (especially in EBLL investigations), the risk assessment report should document the limitation/referral rather than silently treating paint/dust/soil as the only possible pathway.

Last updated: July 2026

3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food

EPA's risk-assessor curriculum in 40 CFR 745.225(d)(2) expressly includes:

Sources of environmental lead contamination such as paint, surface dust and soil, water, air, packaging, and food

Sampling for other sources of lead exposure

A competent risk assessor therefore understands the classic LBP media package and when another pathway may be driving exposure—especially in elevated blood lead level (EBLL) response work.

The Core LBP Media Still Come First

For target housing and child-occupied facilities, Subpart L risk assessments center on:

  • Medium Why it matters Typical methods
  • Paint Source reservoir of lead XRF / paint-chip sampling
  • Dust Primary indoor exposure pathway for young children ASTM E1728 wipes
  • Soil Outdoor ingestion / track-in pathway ASTM E1727 composites

Other sources rarely replace those media, but they can add exposure or explain EBLL cases when paint/dust/soil results are low.

Water (Potable)

Common building-related water-lead contributors:

  • Lead service lines
  • Lead-containing solder on copper plumbing (historically)
  • Brass/bronze faucets and valves that leach lead
  • Long stagnation times in infrequently used taps (child-care classrooms, guest baths)
  • How water sampling differs from dust/soil work
  • Often uses first-draw (stagnant) and flushed samples under drinking-water protocols, not ASTM E1728 templates
  • Results are typically expressed as µg/L (ppb), not µg/ft²
  • Coordination with the water utility, local health department, or a drinking-water sampler is common
  • Risk assessors should not invent a dust-wipe-style water method on the exam or in the field

Document plumbing materials observed (visible solder, older brass fixtures, known lead service line inventories) and refer water testing when interviews or EBLL investigations point to drinking-water exposure.

Air

Airborne lead is primarily regulated as an occupational hazard under OSHA (for example 29 CFR 1926.62) during sanding, blasting, welding, or demolition. For residential risk assessment:

  • Visible disturbance activities can generate lead aerosols that settle as dust on floors and sills
  • HVAC systems can redistribute settled dust

Personal air monitoring is generally an industrial-hygiene task, not a standard Subpart L risk-assessment deliverable

Assessors should note active renovation/abatement without containment as a dust-generation condition and recommend work stoppage / lead-safe practices rather than attempting ad-hoc air cassette programs unless contracted and qualified to do so.

Packaging and Food / Consumer Products

Non-housing sources that appear in EBLL differential diagnosis teaching:

  • Imported candies, spices, or ceremonial powders
  • Lead-glazed cookware or pottery
  • Some cosmetics / eye products (for example traditional kohl/surma in some communities)
  • Contaminated packaging pigments or inks (less common, but historically documented in product recalls)
  • Hobby materials (fishing weights, stained-glass solder) and occupational take-home dust on work clothes

These are rarely "sampled" with ASTM E1728. The assessor's job is to recognize the pathway during the background interview and coordinate with public-health investigators when an EBLL case suggests a non-paint source.

Integrating Other Sources into the Risk Assessment

Practical decision rules:

Always complete the paint/dust/soil scope required by 745.227(d).

If background/EBLL information implicates water, consumer products, or occupational take-home dust, document the suspicion and recommend the appropriate specialist testing/referral.

Do not dismiss deteriorated LBP hazards merely because another source is also present—multiple pathways can co-exist.

In the report's hazard narrative, separate LBP hazards identified under Subpart L from other potential lead sources outside the LBP media package .

Exam-Ready Comparison

Source Primary metric Typical owner of sampling Appears in standard LBP RA?

  • Paint mg/cm² or % by weight Risk assessor / inspector Yes
  • Dust µg/ft² Risk assessor Yes
  • Soil ppm (µg/g) Risk assessor Yes
  • Water µg/L Water utility / DW specialist / health dept Referral / coordinated
  • Air µg/m³ IH / OSHA compliance Occupational context
  • Food/packaging/products Product-specific Public health / consumer product labs Interview + referral
  • EBLL Investigation Coordination

When a local health department refers an EBLL case:

Complete the Subpart L paint/dust/soil risk assessment scope.

Share intact-paint / low-dust findings promptly if they do not explain the EBLL.

Ask targeted questions about water source (well vs. municipal), imported spices/candy, glazed cookware, cosmetics, and caregiver occupations.

Refer drinking-water sampling to the utility or a drinking-water specialist rather than improvising dust-wipe geometry on a faucet.

Keep a clear boundary in the written report between identified LBP hazards and suspected non-LBP sources .

Take-Home Occupational Dust

Caregivers working in battery plants, radiator repair, firing ranges, bridge painting, or demolition can transport lead dust on clothes and shoes. Recommend:

  • Work clothes changed/washed separately
  • Shoes removed at the entry
  • Entryway HEPA cleaning
  • Employer industrial-hygiene follow-up when appropriate

These recommendations complement—not replace—control of any deteriorated LBP, dust-lead, or soil-lead hazards found on site.