Study guide
4.3 Chain of Custody (COC) Documentation, Sample Handling, and Shipping Regulations
EPA Lead Risk Assessor 40 CFR 745 Subpart L
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulatory Framework & Statutory Authority
1.1 TSCA Title IV, Title X, and EPA Regulatory Authority 1.2 40 CFR 745 Subpart L: Scope, Target Housing, and Child-Occupied Facilities 1.3 Lead Certification Roles: Inspector vs. Risk Assessor vs. Abatement Supervisor 1.4 HUD Lead Safe Housing Rule (24 CFR Part 35) & TSCA Section 1018 Disclosure
2 Chapter 2: Hazard Identification & Visual Assessment
2.1 Visual Inspection Protocols and Paint Condition Rating (Intact, Fair, Deteriorated) 2.2 Evaluating Friction, Impact, and Chewable Surface Hazards 2.3 XRF Analyzer Operating Principles, Performance Characteristic Sheets (PCS), and Inconclusive Ranges 2.4 Paint Chip Sampling Protocol, Laboratory Submissions, and Paint Presumptions 2.5 Background Information Collection for Risk Assessments 2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))
3 Chapter 3: Dust and Soil Sampling Protocols
3.1 ASTM E1728 Dust Wipe Sampling Protocols, Materials, Spikes, and Field Blanks 3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels 3.3 ASTM E1727 Soil Sampling Protocols, Composite Sub-sampling, and Core Depths 3.4 Soil-Lead Hazard Thresholds (Play Areas vs. Bare Soil) and Action Triggers 3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food
4 Chapter 4: Laboratory Quality Control & Chain of Custody
4.1 NLLAP Laboratory Accreditation & Approved Analytical Methods (AAS, ICP-AES) 4.2 Field Quality Control: Blank Preparation, Field Duplicates, and Acceptance Criteria 4.3 Chain of Custody (COC) Documentation, Sample Handling, and Shipping Regulations 4.4 Interpreting Laboratory Data, Reconciling QC Failures, and Data Validation
5 Chapter 5: Lead Hazard Control Recommendations
5.1 Regulatory Definitions: Interim Controls vs. Abatement Strategies 5.2 Paint Hazard Control Options: Encapsulation, Enclosure, and Surface Modifications 5.3 Dust and Soil Hazard Controls: Specialized Cleaning, Cover Options, and Removal 5.4 Re-evaluation Intervals, Maintenance Schedules, and Monitoring Plans
6 Chapter 6: Risk Assessment Report & Compliance
6.1 Mandatory Report Components under 40 CFR 745.227(d)(11) and HUD Chapter 5 6.2 Hazard Prioritization, Risk Reduction Action Plans, and Client Communication 6.3 Recordkeeping Regulations, Document Retention (3-Year Rule), and Audit Readiness 6.4 State-Authorized Lead Programs, Local Variations, and Reciprocity Rules
4.3 Chain of Custody (COC) Documentation, Sample Handling, and Shipping Regulations
Key Takeaways Explain This Topic AI
Chain of Custody (COC) documentation establishes an unbroken, legally defensible written record tracking environmental samples from field collection to lab analysis.
A sample is considered in custody if it is in physical possession, in direct view, secured in a locked room, or placed in a tamper-evident sealed container.
Dust wipe samples must be collected in rigid, non-leaching plastic containers (such as 50 mL centrifuge tubes) without chemical preservative additions.
Maximum allowable technical holding time for lead analysis in dust wipes, soil, and paint chip samples is 180 days (6 months).
Environmental lead samples collected during risk assessments are generally exempt from DOT Hazardous Materials Regulations under 49 CFR provided proper packaging and seal protocols are followed.
Last updated: July 2026
4.3 Chain of Custody Documentation, Sample Handling, and Shipping Regulations
The legal integrity of a lead risk assessment or hazard identification report relies directly on the Chain of Custody (COC) . In enforcement actions or litigation, sample results are legally inadmissible if the property owner or regulatory agency cannot prove that the analyzed samples were the exact items collected at the site and that they remained unadulterated throughout transit and storage.
Legal Definition of Custody
Under EPA enforcement standards and evidentiary rules, a sample is defined as being under proper custody if it satisfies any one of the following four conditions:
In actual physical possession of the risk assessor or authorized field personnel.
In plain view of the sampler after being in physical possession.
Secured in a locked space (e.g., a locked field vehicle or locked storage locker) accessible only to authorized personnel.
Placed in a dedicated, tamper-evident sealed container (such as a transport cooler with intact signed security tape) preventing undetected access during transport.
Essential Components of the Chain of Custody Document
The COC form is a binding legal document that must accompany every sample shipment from the field site to the NLLAP-accredited laboratory.
Mandatory Data Fields on the COC Form
Header Information: Project reference name, property address, lead risk assessor name, signature, and EPA/state certification license number.
Sample Tracking Details:
Unique Sample Identification Number (matching container labels exactly).
Date and precise time of sample collection (24-hour clock or explicit AM/PM).
Specific sample location description (e.g., "Apt 2B, Master Bedroom, East Window Sill").
Sample Matrix (e.g., dust wipe, composite soil, paint chip, air cassette, drinking water).
Field Dimensions / Sample Volume: Measured wipe surface dimensions in inches (e.g., 12 in x 12 in or 4 in x 24 in), total wiped area in square feet, or initial sample weight.
Custody Transfer Table: Sequential sign-off section capturing signature, printed name, date, and exact time whenever physical custody is transferred ("Relinquished By" and "Received By").
Shipping Documentation: Commercial carrier airbill / tracking number and initial cooler temperature (where applicable).
Sample Containers, Preservation, and Holding Times
Proper container selection prevents sample degradation, lead sorption onto container walls, or external contamination.
Sample Matrix Container Specifications Field Chemical Preservation Maximum Technical Holding Time
Dust Wipes Rigid, non-leaching polypropylene centrifuge tubes (e.g., 50 mL tubes) with leak-proof screw caps. None (do not add acid in field). 180 days (6 months)
Soil Samples Clean, wide-mouth glass jars with Teflon-lined caps or heavy-duty sealable polyethylene bags (e.g., Ziploc). None required; chill to <= 6 degrees C recommended to suppress biological activity. 180 days (6 months)
Paint Chips Rigid plastic containers or sealable heavy-duty polyethylene bags. None. Must scrape all paint layers down to bare substrate. 180 days (6 months)
Drinking Water 1-liter high-density polyethylene (HDPE) bottles. Acidify with HNO₃ to pH < 2 (in field or within 14 days by lab). 180 days (after acidification)
Air Filters 37 mm polystyrene cassette holders with 0.8 µm mixed cellulose ester (MCE) filters, sealed with end plugs. None. 180 days
Shipping Regulations & Hazardous Materials (DOT Guidelines)
Risk assessors must safely package and ship samples to NLLAP facilities while complying with Department of Transportation (DOT) shipping regulations under 49 CFR Parts 171-180 .
Hazardous Materials Exemption Criteria
Routine environmental samples (dust wipes, ambient soil, paint scrapings) collected during lead risk assessments are exempt from hazardous materials packaging and labeling requirements because lead locked in paint, soil, or wipes is not classified as a DOT hazardous material unless it meets specific bulk hazardous waste criteria (e.g., toxic characteristic leaching procedure TCLP thresholds).
Standard Sample Packaging Protocol
Primary Container Check: Ensure all centrifuge tubes, soil bags, and paint containers are tightly sealed and individually labeled with waterproof ink.
Secondary Containment: Place primary containers into sealed plastic ziplock bags (double-bagging) to prevent loss if a container fractures during transit.
Cushioning and Outer Box: Pack double-bagged samples into a sturdy outer shipping box or cooler surrounded by shock-absorbing packaging material (bubble wrap or vermiculite).
COC Inclusion: Seal the completed, signed COC form in a waterproof plastic sleeve and place it inside the shipping container directly on top of the packaging materials.
Tamper Seals: Apply signed and dated paper/vinyl tamper-evident seals across the flap opening of the outer shipping container or cooler lid so that opening the container breaks the seal.
Laboratory Receipt & Intake Protocols
Upon receipt, the laboratory sample custodian inspects the shipment:
Verifies tamper seals are intact and checks shipping container temperature (if required).
Unpacks containers and cross-checks every sample ID, collection date, matrix, and template dimension against the accompanying COC.
Signs and dates the "Received By" section of the COC, noting any sample anomalies (such as cracked tubes, torn wipes, or missing labels) directly on the log.
Assigns a unique internal Laboratory Information Management System (LIMS) tracking number to each sample.