Study guide

5.4 Re-evaluation Intervals, Maintenance Schedules, and Monitoring Plans

EPA Lead Risk Assessor 40 CFR 745 Subpart L

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Regulatory Framework & Statutory Authority

1.1 TSCA Title IV, Title X, and EPA Regulatory Authority 1.2 40 CFR 745 Subpart L: Scope, Target Housing, and Child-Occupied Facilities 1.3 Lead Certification Roles: Inspector vs. Risk Assessor vs. Abatement Supervisor 1.4 HUD Lead Safe Housing Rule (24 CFR Part 35) & TSCA Section 1018 Disclosure

2 Chapter 2: Hazard Identification & Visual Assessment

2.1 Visual Inspection Protocols and Paint Condition Rating (Intact, Fair, Deteriorated) 2.2 Evaluating Friction, Impact, and Chewable Surface Hazards 2.3 XRF Analyzer Operating Principles, Performance Characteristic Sheets (PCS), and Inconclusive Ranges 2.4 Paint Chip Sampling Protocol, Laboratory Submissions, and Paint Presumptions 2.5 Background Information Collection for Risk Assessments 2.6 Lead Hazard Screen Protocol (40 CFR 745.227(c))

3 Chapter 3: Dust and Soil Sampling Protocols

3.1 ASTM E1728 Dust Wipe Sampling Protocols, Materials, Spikes, and Field Blanks 3.2 EPA Dust-Lead Hazard Standards (40 CFR 745.65) & Post-Abatement Action Levels 3.3 ASTM E1727 Soil Sampling Protocols, Composite Sub-sampling, and Core Depths 3.4 Soil-Lead Hazard Thresholds (Play Areas vs. Bare Soil) and Action Triggers 3.5 Other Environmental Lead Sources: Water, Air, Packaging, and Food

4 Chapter 4: Laboratory Quality Control & Chain of Custody

4.1 NLLAP Laboratory Accreditation & Approved Analytical Methods (AAS, ICP-AES) 4.2 Field Quality Control: Blank Preparation, Field Duplicates, and Acceptance Criteria 4.3 Chain of Custody (COC) Documentation, Sample Handling, and Shipping Regulations 4.4 Interpreting Laboratory Data, Reconciling QC Failures, and Data Validation

5 Chapter 5: Lead Hazard Control Recommendations

5.1 Regulatory Definitions: Interim Controls vs. Abatement Strategies 5.2 Paint Hazard Control Options: Encapsulation, Enclosure, and Surface Modifications 5.3 Dust and Soil Hazard Controls: Specialized Cleaning, Cover Options, and Removal 5.4 Re-evaluation Intervals, Maintenance Schedules, and Monitoring Plans

6 Chapter 6: Risk Assessment Report & Compliance

6.1 Mandatory Report Components under 40 CFR 745.227(d)(11) and HUD Chapter 5 6.2 Hazard Prioritization, Risk Reduction Action Plans, and Client Communication 6.3 Recordkeeping Regulations, Document Retention (3-Year Rule), and Audit Readiness 6.4 State-Authorized Lead Programs, Local Variations, and Reciprocity Rules

5.4 Re-evaluation Intervals, Maintenance Schedules, and Monitoring Plans

Key Takeaways Explain This Topic AI

Re-evaluations are risk assessor-conducted follow-up investigations designed to determine if interim controls remain effective and if new lead hazards have developed in target housing.

Property owners implementing interim controls must establish routine visual monitoring schedules (typically every 12 months or at unit turnover) to identify paint failure or substrate damage.

Post-control clearance testing, conducted by a certified lead risk assessor or inspector independent of the abatement contractor, is legally mandatory before re-occupancy after hazard control work.

Ongoing occupant protection plans for multi-family target housing must document maintenance practices, occupant notification procedures, work-prep protocols, and scheduled re-evaluations.

Standard EPA/HUD re-evaluation schedules mandate an initial re-evaluation 12 months post-interim control, with subsequent intervals extended up to 2 years if controls remain in intact condition.

Last updated: July 2026

Hazard control recommendations do not conclude upon the completion of physical abatement or interim control work. To ensure that housing remains lead-safe over time, federal regulations under 40 CFR Part 745 and HUD Guidelines Chapter 13 mandate structured protocols for Post-Control Clearance Testing , Property Owner Maintenance Visual Monitoring , Formal Risk Re-Evaluations , and Occupant Protection Plans (OPP) . A certified Lead Risk Assessor must design clear, enforceable monitoring schedules tailored to the specific control measures implemented at target housing properties.

Purpose & Scope of Re-Evaluations in Lead Hazard Management

A Re-Evaluation is a formal, targeted investigation conducted exclusively by a certified Lead Risk Assessor. The objective of a re-evaluation is twofold:

To visually and analytically determine if previously installed interim controls and encapsants remain in intact, functional condition.

To determine whether new lead-based paint hazards have developed elsewhere on the property due to building deterioration, moisture damage, or substrate wear.

Certified Lead Inspectors, abatement supervisors, and property maintenance workers are not legally authorized to conduct formal hazard re-evaluations.

Standard Re-Evaluation Intervals & Regulatory Schedules (HUD Chapter 13)

The timing and frequency of formal risk re-evaluations depend directly upon the nature of the hazard controls installed on the property:

Initial Re-Evaluation Interval : For properties where interim controls were implemented, the first formal re-evaluation must be conducted 12 months following the completion of interim control work.

Subsequent Re-Evaluation Intervals : If the 12-month re-evaluation demonstrates that all interim controls remain intact and dust wipe lead levels comply with clearance standards, subsequent re-evaluations are scheduled every 2 years (24 months) .

Interval Extension & Waiver : If interim controls remain fully intact and dust clearance levels are maintained across two consecutive 2-year re-evaluations (a 5-year track record of stability), the risk assessor may extend future re-evaluation intervals or discontinue them, provided no new hazards are identified.

Abatement Exceptions : Properties where 100% of lead paint hazards were abated via component replacement or complete paint removal do not require routine re-evaluations. However, surfaces treated with liquid encapsants or enclosures require ongoing monitoring because sealant failures or structural damage can re-expose lead.

Visual Inspection Schedules for Property Owners and Maintenance Personnel

While formal re-evaluations require a certified risk assessor, property owners, facility managers, and housing authority maintenance staff must execute routine Visual Monitoring Inspections to identify failing paint before severe dust hazards develop.

Inspection Level Minimum Frequency Responsible Entity Inspection Scope & Action Trigger

Owner Visual Check Annual (every 12 months) Property Owner / Facility Manager Check all painted surfaces, enclosures, & mulch depth; repair flaking paint

Unit Turnover Inspection At every tenant move-out / turnover Property Owner / Maintenance Staff Comprehensive visual inspection of paint, friction sills, & window operation

Event-Driven Check Immediately following water leaks/storms Maintenance Personnel Inspect plaster & drywall for water damage, swelling, peeling, or mold

Risk Assessor Re-Evaluation 12 months initial, then every 24 months Certified Lead Risk Assessor Visual check + dust wipe & soil sampling; issue formal Compliance Report

Post-Control Clearance Testing Procedures & Regulatory Standards

Clearance testing is a legally mandated evaluation performed immediately following any lead hazard control, abatement, or RRP (Renovation, Repair, and Painting) activity prior to re-occupancy by residents.

Mandatory Independence Rule

Clearance testing must be conducted by an independent certified Lead Risk Assessor or Lead Inspector . The individual conducting clearance testing cannot be employed by, affiliated with, or sub-contracted under the lead abatement firm performing the work. This strict independence rule eliminates financial conflicts of interest and guarantees objective environmental sampling.

Two-Stage Clearance Examination Protocol

Stage 1: Visual Inspection : The risk assessor conducts a thorough visual assessment of the work area and containment zones. The area must pass visual inspection 100% before any dust sampling occurs. The visual check verifies zero visible dust, paint chips, wood shavings, or construction debris. If any visible debris or dust is detected, the area fails clearance , dust sampling is canceled, and the contractor must re-clean the area immediately.

Stage 2: Environmental Dust Wipe Sampling : Once visual inspection is passed, dust wipe samples are collected from specified surfaces using EPA-approved wipe materials (e.g., ASTM E1792 compliant wipes) and submitted to an NLEAP-accredited laboratory.

Surface Sampled Federal Clearance Standard (EPA / HUD) Sampling Location & Method

Interior Hard Floors 5 µg/ft² action level (on/after Jan 12, 2026; was 10) Single wipe over measured 1 ft² template (carpeted floors visually clean)

Interior Window Sills 40 µg/ft² action level (on/after Jan 12, 2026; was 100) Single wipe along entire flat sill surface

Window Troughs / Wells 100 µg/ft² action level (on/after Jan 12, 2026; was 400) Single wipe along un-cleaned window sash track trough

If any single dust wipe sample exceeds these federal dust-lead action levels, the containment area fails clearance, requiring complete HEPA-sandwich re-cleaning of the represented area followed by re-testing.

Ongoing Occupant Protection Plans (OPP) in Multi-Family Target Housing

An Occupant Protection Plan (OPP) is a written, site-specific safety protocol mandated under 40 CFR 745.227 for all lead abatement projects and ongoing multi-family housing hazard management programs. The OPP must be authored by a certified Lead Abatement Supervisor or Lead Risk Assessor before work commences.

Key elements of an Occupant Protection Plan include:

Tenant Notification & Education : Written notification provided to occupants detailing the scope of work, scheduled work dates, and lead safety precautions.

Relocation Protocols : Identifying whether temporary relocation of occupants (especially pregnant women and children under six) is required during heavy dust-generating abatement work.

Containment Boundaries : Specifying plastic sheeting (minimum 6-mil poly), air lock entryways, negative pressure exhaust systems, and seal-offs for HVAC vents to isolate work zones from occupied living areas.

Maintenance Worker Safe Work Practices : Establishing written standard operating procedures prohibiting uncontained dry sanding or scraping and mandating HEPA-containment tools during routine plumbing or electrical repairs.