Study guide

18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait

EPA Lead Abatement Supervisor 40 CFR 745 Subpart L

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Facts, Supervisor Role, and Certification Path

1.1 Current Exam Facts 1.2 Supervisor Role, Responsibilities, and On-Site Presence 1.3 Prerequisites, Interim Certification, and the Third-Party Exam

2 Chapter 2: Firm Certification, Recertification, and Enforcement

2.1 Firm Certification vs Individual Certification 2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles 2.3 Suspension, Revocation, TSCA Violations, and Inspections

3 Chapter 3: Title X, 40 CFR 745, State Programs, and HUD Guidelines

3.1 Title X, TSCA 402–406, and 40 CFR 745 Architecture 3.2 Target Housing, Child-Occupied Facilities, and the 1978 Ban 3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity 3.4 HUD Guidelines and Other Documented Methodologies

4 Chapter 4: Lead Health Effects, Blood-Lead Benchmarks, and Liability

4.1 Lead Toxicology, Child and Adult Health Effects, and Blood-Lead Benchmarks 4.2 Liability, Insurance, and Contract Risk for Abatement Supervisors

5 Chapter 5: What Counts as Abatement

5.1 Abatement vs Interim Controls vs RRP 5.2 Lead-Based Paint Definition and Component Language 5.3 Paint-Lead, Dust-Lead, and Soil-Lead Hazard Definitions

6 Chapter 6: Lead Hazard Recognition in the Field

6.1 Deteriorated Paint and Paint in Poor Condition 6.2 Friction, Impact, and Chewable Surface Hazards 6.3 High-Risk Components, Common Areas, and Dust Pathways

7 Chapter 7: Interpreting Inspection and Risk Assessment Reports

7.1 Reading Inspection Reports, XRF Results, and Paint-Chip Data 7.2 Reading Risk Assessment Reports and Selecting Control Options 7.3 Lead Hazard Screens vs Full Risk Assessments

8 Chapter 8: Occupant Protection Plans

8.1 Occupant Protection Plan Requirements 8.2 Relocation, Isolation of Work Areas, and Sensitive Occupants 8.3 Re-Occupancy Criteria, Occupant Notice, and Access Control

9 Chapter 9: Project Notification and Work Plans

9.1 Five-Business-Day Notification Contents and Electronic Filing 9.2 Updated, Canceled, EBL, and Emergency Notifications 9.3 Work Plans, Method Selection Documentation, and Pre-Abatement Walkthrough

10 Chapter 10: Interior Containment Design

10.1 Critical Barriers, Warning Signs, and Regulated Areas 10.2 Negative Air Pressure and HEPA Air-Filtration Units 10.3 Three-Stage Decontamination Units and Worker Flow

11 Chapter 11: Exterior Containment and Site Control

11.1 Exterior Ground Sheeting, Vertical Containment, and Weather Limits 11.2 Daily Exterior Cleanup, Paint-Chip Control, and Occupied/Multi-Family Logistics

12 Chapter 12: Component Replacement, Enclosure, and Encapsulation

12.1 Component Replacement 12.2 Enclosure Systems and Mechanical Fastening 12.3 Encapsulation Products, Unsuitable Surfaces, and Maintenance Schedules

13 Chapter 13: Paint Removal and Restricted Practices

13.1 Wet Scraping, Chemical Removal, and Heat Guns Below 1100°F 13.2 Restricted and Prohibited Practices 13.3 Selecting Methods, Combining Methods, and Documenting Why

14 Chapter 14: Interior Dust Abatement and Cleaning

14.1 Interior Dust Cleanup Sequence 14.2 Pre-Clearance Visual Inspection and When Cleanup Is Not Done

15 Chapter 15: Soil and Exterior Dust Abatement

15.1 Soil-Lead Hazards and Sampling Interpretation for Supervisors 15.2 Soil Removal and Replacement 15.3 Permanent Covering vs Landscaping

16 Chapter 16: OSHA 1926.62 Worker Protection

16.1 PEL, Action Level, and Exposure Assessment 16.2 Respiratory Protection, PPE, and Hygiene Facilities 16.3 Biological Monitoring and Medical Removal Protection 16.4 OSHA Competent Person Duties vs EPA Certified Supervisor Duties

17 Chapter 17: RCRA Waste Management

17.1 Abatement Waste Streams 17.2 TCLP Characterization and D008 17.3 Manifests, TSDF, Accumulation, and the Household Exclusion

18 Chapter 18: Action Levels, Post-Abatement Testing, and Records

18.1 Dust-Lead Action Levels vs Reportable-Level Hazards 18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait 18.3 Failed Samples, Reclean/Retest, Exterior Visual, and Multi-Family Random Sampling 18.4 Abatement Report, 2026 Hazard Statement, Owner Copies, and 3-Year Retention

18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait

Key Takeaways Explain This Topic AI

Post-abatement procedures under 40 CFR 745.227(e)(8) shall be performed only by a certified inspector or risk assessor. Paint-chip, dust, and soil samples under 745.227(f) are collected by an inspector or risk assessor and analyzed by a TSCA 405(b) recognized (NLLAP) laboratory. A supervisor does not self-clear.

Visual first: no deteriorated paint and no visible dust, debris, or residue, or those conditions must be eliminated before sampling continues (745.227(e)(8)(i)).

Dust samples shall be taken a minimum of 1 hour after completion of final post-abatement cleanup (745.227(e)(8)(iv)). Single-surface or composite sampling is allowed.

With containment: one interior sill and one trough (if present), plus a floor sample from each of no less than four rooms, hallways, or stairwells inside containment (or all if fewer than four), plus one floor sample outside the containment area (745.227(e)(8)(v)(A)).

Without containment: two dust samples from each of no less than four rooms, hallways, or stairwells (sill and trough if present, and floor), or all such spaces if fewer than four (745.227(e)(8)(v)(B)). A certified supervisor shall be onsite during post-abatement cleanup (745.227(e)(2)) but still does not collect the wipes.

Last updated: August 2026

The supervisor does not wipe the job the supervisor just cleaned

Quick Answer: 745.227(e)(8) opens with a discipline lock: post-abatement procedures shall be performed only by a certified inspector or risk assessor. That includes the visual and the dust sampling . 745.227(f) repeats that paint-chip, dust, or soil samples under these work-practice standards are collected by a certified inspector or risk assessor and analyzed by a laboratory recognized by EPA under TSCA section 405(b) ( NLLAP ). Visual first: no deteriorated paint and no visible dust, debris, or residue , or eliminate those conditions before sampling continues ( (e)(8)(i) ). Wipes wait a minimum of 1 hour after final post-abatement cleanup ( (e)(8)(iv) ). Single-surface or composite is allowed. With containment , sample one interior sill and one trough if present, floors of no less than four rooms/halls/stairs inside containment (or all if fewer), plus one floor sample outside the containment area . Without containment , two dust samples from each of no less than four rooms (sill and trough if present, and floor). A certified supervisor shall be onsite during post-abatement cleanup ( 745.227(e)(2) ) and still cannot self-clear .

Chapter 14.2 taught the visual gate as a cleanup-management rule. This section is the sampling plan and the independence rule the exam will put next to 5 / 40 / 100. Who holds the wipe, who runs the lab, how many rooms, and why there is a floor sample outside the plastic are 18.2. Composite arithmetic, failed-sample reclean, exterior visual, and multi-family random sampling are 18.3. The abatement report is 18.4.

Independence: inspector or risk assessor, NLLAP lab, no supervisor ghost wipes

Certified inspector and certified risk assessor are the only people 745.223 and 745.227(e)(8) authorize to sample dust and soil for abatement-related testing. A certified supervisor prepares occupant protection plans and abatement reports and runs the job. That is a different discipline. Holding a supervisor card does not authorize post-abatement wipes. Holding an RRP renovator card or a dust sampling technician credential used on some HUD / RRP jobs does not satisfy 745.227(e)(8) .

745.227(f) is the chain-of-custody sentence:

Collected by persons certified as an inspector or risk assessor .

Analyzed by a laboratory recognized by EPA pursuant to TSCA section 405(b) as capable of performing analyses for lead in paint chip, dust, and soil — the National Lead Laboratory Accreditation Program (NLLAP) list.

A field kit, an XRF dust reading, a contractor's in-house wipe sent to a non-recognized lab, or the supervisor "helping" because the assessor is stuck in traffic does not become post-abatement testing because the numbers look official.

Person Role at the end of the job Not their role

Certified supervisor On site for all post-abatement cleanup of work areas ( 745.227(e)(2) ); HUD preliminary visual so you do not call the assessor onto a dirty floor; reclean when told Collect (e)(8) wipes; sign the regulatory visual; analyze samples; declare the dwelling below action levels

Certified inspector or risk assessor (e)(8)(i) visual; dust samples ≥1 hour after final cleanup; compare results to action levels Supervise the mop in the supervisor's place; skip visual because the crew texted "we're good"

  • Certified abatement worker Cleans under the supervisor Authorizes testing or collects wipes
  • NLLAP / TSCA 405(b) lab Quantifies the wipes Does not replace the inspector on site

Dust sampling technician / RRP renovator Wrong credential for 745.227(e)(8) Do not treat cleaning verification or a technician wipe as abatement post-abatement testing

Worked example — supervisor self-clear. Cleanup finished. The risk assessor cancelled. The supervisor, certified only as a supervisor, wipes four floors and two sills, drives them to an NLLAP lab, and puts the results in the abatement report. The lab is recognized. The collector is not an inspector or risk assessor. (e)(8) and (f) both fail. Redo the visual and the wipes with the right person. Do not paper over it.

Worked example — same human, two cards. The project supervisor also holds a current risk-assessor certification. (e)(8) is a function lock, not a "two hats in one skull is always forbidden" sentence. Using a separate inspector or risk assessor is still the cleaner independence story, and owners and HUD programs often require it. What you cannot do is treat supervisor-only certification as a sampling license.

Visual first, then the hour, then the wipe

(e)(8) is ordered on purpose:

Visual inspection for deteriorated painted surfaces and/or visible dust, debris, or residue. If present, eliminate those conditions prior to continuation of post-abatement testing ( (e)(8)(i) ).

Then dust sampling, single-surface or composite ( (e)(8)(ii) ), using documented methodologies with adequate quality control ( (e)(8)(iii) ).

Samples taken a minimum of 1 hour after completion of final post-abatement cleanup activities ( (e)(8)(iv) ).

A failed visual is not a wipe with a footnote. Sampling does not continue . Recleaning after a failed visual is post-abatement cleanup; the supervisor is onsite for it. The 1-hour clock starts from final cleanup — the reclean — not from the first mop that left grit in the trough.

Do not collapse two different hours. HUD documented methodology tells you to wait after paint-disturbing work so dust settles before final cleaning . 745.227(e)(8)(iv) is a different hour after that cleaning, before samples . Honoring the settle hour and then wiping 20 minutes after the last pass still violates (e)(8)(iv).

Worked example — keys at 3:00. Cleanup ended at 2:15. Visual is clean. The assessor is in the driveway. Wipes at 2:20 are early. Wait until at least 3:15. The owner's move-in time is not a documented methodology.

How many samples — containment versus no containment

(e)(8)(v) splits on whether you built containment between abated and unabated areas . Rooms, hallways, or stairwells selected for sampling are selected according to documented methodologies ( (e)(8)(vi) ) — HUD Guidelines and EPA residential sampling protocols, not "the prettiest room."

Situation Floors Windows Extra sample you must not skip

Abatement with containment ( (e)(8)(v)(A) ) One dust sample from the floors of each of no less than four rooms, hallways, or stairwells within the containment area . If fewer than four such spaces are inside containment, sample all of them. One interior window sill and one window trough ( if present ) One floor sample outside the containment area

Abatement with no containment ( (e)(8)(v)(B) ) One dust sample from the floor of each of no less than four rooms, hallways, or stairwells in the dwelling or child-occupied facility (or all if fewer than four) From each selected room: interior window sill and window trough ( if present ) The regulation's opening count is two dust samples from each of those rooms: window side (sill and trough if present) and floor. There is no "outside containment" floor because there was no containment line.

Exterior paint abatement ( (e)(8)(v)(C) ) Not a wipe protocol Not a wipe protocol Visual — Section 18.3

The outside-containment floor is the leak detector. Plastic and tape are not magic. If containment failed, lead dust walked. That single floor wipe outside the containment area is how (e)(8) looks for it. Skipping it because "we taped well" is an (e)(8)(v)(A) miss even if every interior floor is 2 µg/ft².

Worked example — contained bedroom plus hall, two rooms total inside. Window replacement ran in a taped bedroom and the hall that served it. Only two rooms/halls are inside containment. (e)(8)(v)(A) says if fewer than four spaces are inside, sample all of them: floor in the bedroom, floor in the hall, one interior sill, one trough if present, plus the floor outside containment (typically the first unabated room or corridor beyond the critical barrier). You do not invent two extra interior rooms that were never in the work area just to reach four. You also do not skip the outside floor because you only had two interior spaces.

Worked example — whole-unit abatement, no containment. Four rooms plus a stair. No plastic between abated and unabated space because the whole unit was the work area. (e)(8)(v)(B): at least four rooms/halls/stairs; from each selected space, floor plus sill and trough if present. If the unit only has three rooms, sample all three . Do not pull a neighbor's apartment to make four.

Worked example — contained living room in an occupied unit. One living room contained; kitchen and bedrooms occupied and outside the plastic. Inside containment there is one room — sample that floor, the sill, the trough if present, and one floor outside containment (kitchen or hall beyond the barrier). Occupied rooms that were never inside the containment area are not "the four rooms" of (v)(A). The four-room count is within the containment area , with the all-if-fewer rule, plus the outside floor.

Single-surface versus composite is a technique choice under (e)(8)(ii). Composite rules and the fail math live in Section 18.3. Either way, documented methodologies pick which rooms. Do not always wipe the room you cleaned best and skip the stair you used as a staging dump.

Supervisor decision test before you call the assessor. (1) Was the certified supervisor on site for the entire final cleanup? (2) Is the room visually empty of deteriorated paint, dust, debris, and residue on a HUD preliminary look? (3) Is the person coming an inspector or risk assessor, not a technician and not you? (4) Will wipes wait ≥1 hour after final cleanup? (5) If you used containment, does the plan include the outside floor? (6) If you did not, does the plan take two samples from each of at least four rooms (or all if fewer)? (7) Is the lab on the NLLAP list?

Official sources: 40 CFR 745.227(e)(2), (e)(8), (f) (supervisor on site for cleanup; inspector/RA-only post-abatement procedures; visual; 1-hour wait; containment vs no-containment sampling; NLLAP / TSCA 405(b) analysis); 40 CFR 745.223 (inspector and risk assessor sample dust for abatement-related testing).

Loading diagram... Independent Visual, 1-Hour Wait, and Containment vs No-Containment Samples