Study guide
2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles
EPA Lead Abatement Supervisor 40 CFR 745 Subpart L
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Facts, Supervisor Role, and Certification Path
1.1 Current Exam Facts 1.2 Supervisor Role, Responsibilities, and On-Site Presence 1.3 Prerequisites, Interim Certification, and the Third-Party Exam
2 Chapter 2: Firm Certification, Recertification, and Enforcement
2.1 Firm Certification vs Individual Certification 2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles 2.3 Suspension, Revocation, TSCA Violations, and Inspections
3 Chapter 3: Title X, 40 CFR 745, State Programs, and HUD Guidelines
3.1 Title X, TSCA 402–406, and 40 CFR 745 Architecture 3.2 Target Housing, Child-Occupied Facilities, and the 1978 Ban 3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity 3.4 HUD Guidelines and Other Documented Methodologies
4 Chapter 4: Lead Health Effects, Blood-Lead Benchmarks, and Liability
4.1 Lead Toxicology, Child and Adult Health Effects, and Blood-Lead Benchmarks 4.2 Liability, Insurance, and Contract Risk for Abatement Supervisors
5 Chapter 5: What Counts as Abatement
5.1 Abatement vs Interim Controls vs RRP 5.2 Lead-Based Paint Definition and Component Language 5.3 Paint-Lead, Dust-Lead, and Soil-Lead Hazard Definitions
6 Chapter 6: Lead Hazard Recognition in the Field
6.1 Deteriorated Paint and Paint in Poor Condition 6.2 Friction, Impact, and Chewable Surface Hazards 6.3 High-Risk Components, Common Areas, and Dust Pathways
7 Chapter 7: Interpreting Inspection and Risk Assessment Reports
7.1 Reading Inspection Reports, XRF Results, and Paint-Chip Data 7.2 Reading Risk Assessment Reports and Selecting Control Options 7.3 Lead Hazard Screens vs Full Risk Assessments
8 Chapter 8: Occupant Protection Plans
8.1 Occupant Protection Plan Requirements 8.2 Relocation, Isolation of Work Areas, and Sensitive Occupants 8.3 Re-Occupancy Criteria, Occupant Notice, and Access Control
9 Chapter 9: Project Notification and Work Plans
9.1 Five-Business-Day Notification Contents and Electronic Filing 9.2 Updated, Canceled, EBL, and Emergency Notifications 9.3 Work Plans, Method Selection Documentation, and Pre-Abatement Walkthrough
10 Chapter 10: Interior Containment Design
10.1 Critical Barriers, Warning Signs, and Regulated Areas 10.2 Negative Air Pressure and HEPA Air-Filtration Units 10.3 Three-Stage Decontamination Units and Worker Flow
11 Chapter 11: Exterior Containment and Site Control
11.1 Exterior Ground Sheeting, Vertical Containment, and Weather Limits 11.2 Daily Exterior Cleanup, Paint-Chip Control, and Occupied/Multi-Family Logistics
12 Chapter 12: Component Replacement, Enclosure, and Encapsulation
12.1 Component Replacement 12.2 Enclosure Systems and Mechanical Fastening 12.3 Encapsulation Products, Unsuitable Surfaces, and Maintenance Schedules
13 Chapter 13: Paint Removal and Restricted Practices
13.1 Wet Scraping, Chemical Removal, and Heat Guns Below 1100°F 13.2 Restricted and Prohibited Practices 13.3 Selecting Methods, Combining Methods, and Documenting Why
14 Chapter 14: Interior Dust Abatement and Cleaning
14.1 Interior Dust Cleanup Sequence 14.2 Pre-Clearance Visual Inspection and When Cleanup Is Not Done
15 Chapter 15: Soil and Exterior Dust Abatement
15.1 Soil-Lead Hazards and Sampling Interpretation for Supervisors 15.2 Soil Removal and Replacement 15.3 Permanent Covering vs Landscaping
16 Chapter 16: OSHA 1926.62 Worker Protection
16.1 PEL, Action Level, and Exposure Assessment 16.2 Respiratory Protection, PPE, and Hygiene Facilities 16.3 Biological Monitoring and Medical Removal Protection 16.4 OSHA Competent Person Duties vs EPA Certified Supervisor Duties
17 Chapter 17: RCRA Waste Management
17.1 Abatement Waste Streams 17.2 TCLP Characterization and D008 17.3 Manifests, TSDF, Accumulation, and the Household Exclusion
18 Chapter 18: Action Levels, Post-Abatement Testing, and Records
18.1 Dust-Lead Action Levels vs Reportable-Level Hazards 18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait 18.3 Failed Samples, Reclean/Retest, Exterior Visual, and Multi-Family Random Sampling 18.4 Abatement Report, 2026 Hazard Statement, Owner Copies, and 3-Year Retention
2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles
Key Takeaways Explain This Topic AI
An individual must apply electronically and be recertified every 3 years if the accredited training course used a course test and hands-on assessment, or every 5 years if the course used a proficiency test (40 CFR 745.226(e)(1)).
Recertification requires completing an accredited refresher and submitting the refresher course completion certificate with the $410 supervisor recertification fee. EPA does not require a third-party exam for recertification.
The supervisor refresher is a minimum of 8 training hours and must include a hands-on component; it reviews the full-length curriculum plus current safety practices, laws, and technologies.
If the recertification application is not completed before the certificate expires, the individual must retake the initial course and reapply, including the third-party exam.
The 6-month interim certificate is an initial-certification clock only. Do not confuse it with the 3-year or 5-year recertification cycle, or with the firm's 3-year $550 fee cycle.
Last updated: August 2026
Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles
Quick Answer: Recertify electronically every 3 years if your accredited course used a course test plus hands-on assessment, or every 5 years if it used a proficiency test. Complete an accredited 8-hour supervisor refresher that includes hands-on work, submit the refresher certificate and the $410 fee, and do it before the current card expires. There is no third-party exam on recertification. Miss the window and you start over with the initial course and the exam.
Initial certification (Chapter 1) is a three-part gate: accredited 32-hour course, experience, and the EPA third-party exam. Recertification is a different gate. 745.226(e) does not send you back to the exam vendor. It sends you back to an accredited training provider for a refresher, then back to EPA's electronic application.
The 3-year versus 5-year trigger
745.226(e)(1) sets two clocks. A certified individual must apply electronically and be recertified by EPA:
- Every 3 years if the individual completed a training course with a course test and hands-on assessment
- Every 5 years if the individual completed a training course with a proficiency test
That split comes from how accredited courses may be assessed. Under 745.225(c)(7) , a training program conducts either a course test and, if applicable, a hands-on skills assessment, or a proficiency test for that discipline. The recertification interval follows that assessment method. It is not a menu you pick at the EPA payment screen, and it is not based on how many jobs you ran last year.
Most current supervisor courses use a course test plus hands-on assessment, so most supervisors live on the 3-year clock. The 5-year path exists in the rule for proficiency-test courses. The 745.238 fee table header says "every 3 years" and then points you to 745.226(e)(1) for details — learn the regulation, not just the table caption.
Assessment method used in the accredited course Individual recertification interval Typical supervisor path?
- Course test and hands-on skills assessment 3 years Yes — this is the usual clock
- Proficiency test 5 years Possible under 745.225(c)(7); less common
Do not mix these clocks with neighboring numbers:
6-month interim certificate after the initial course: initial certification only (Chapter 1). It is the window to sit the third-party exam, not a recertification cycle.
3-year firm recertification : the company pays $550. No refresher course for the firm itself.
4-year training-program accreditation : the school, not you.
5-year RRP firm certification : renovation firms, not LBP-activities firms.
What recertification actually requires
Under 745.226(e)(2) , an individual is recertified if the individual:
Successfully completes the appropriate accredited refresher training course, and
Electronically submits a valid copy of the refresher course completion certificate .
745.226(e)(3) adds the 745.238 fee — $410 for a supervisor, $10 for tribal individual certification in that discipline. EPA's recertification page is blunt about the rest of the process: you must take the refresher, complete the application, and receive the new certificate from EPA before the current certification expires . Taking the class is not enough if the application is still sitting in a drafts folder on expiration day.
No third-party exam is required for recertification. That is true even if you cannot find a refresher and instead complete another accredited initial course in the discipline. EPA's recertification page and the Lead-Based Paint Program frequent questions both state that substituting an initial course for a missing refresher still does not trigger the exam. The exam comes back only when you have to re-enter as an initial applicant because recertification was not completed in time.
If a refresher is not available in your area, EPA allows you to take an accredited initial supervisor course instead. You must successfully complete the entire initial course — not a one-day sit-in. That path is a fallback, not a shortcut: a 32-hour initial course is a long way around an 8-hour refresher.
You need an accredited refresher (or the initial-course substitute) for each discipline in which you are certified. A supervisor who also holds inspector certification cannot recertify both cards with one supervisor refresher. The courses must be accredited by EPA or by an EPA-authorized state or tribal program.
The 8-hour supervisor refresher
745.225(e)(2) sets the length and the hands-on rule:
- Inspector, risk assessor, supervisor , and abatement worker refreshers: minimum 8 training hours
- Project designer, renovator, and dust sampling technician refreshers: minimum 4 training hours
Hands-on is required for all disciplines except renovator and project designer . Supervisor refreshers therefore must include hands-on .
745.225(e)(1) tells accredited providers what the 8 hours have to cover. The refresher reviews the curriculum topics of the full-length supervisor course in 745.225(d)(3), and it must also include:
- an overview of current safety practices for lead-based paint, plus discipline-specific material
- current laws and regulations , plus discipline-specific material
- current technologies , plus discipline-specific material
That is why a refresher is not a greatest-hits slideshow of the 32-hour course. Dust-lead action levels, notification practice, and restricted methods change. The 8 hours exist so a supervisor certified in 2023 is not still quoting 2024 dust numbers on a 2026 job.
745.225(e)(3) adds assessment. Except for renovator and project designer courses, the training program conducts a hands-on assessment . With the exception of project designer courses, the program also conducts a course test at the end. For a supervisor refresher, expect both: hands-on skills check and a written course test. Passing that provider test is not the EPA third-party exam.
Timing: 18-month window, no lost time, no late grace
EPA recommends that you take refresher training no earlier than 18 months before the current certification expires, and that you start looking well before that because refresher seats are not always local. You do not lose time off the current card by recertifying early. When EPA approves the application, the new certificate begins on the current expiration date . On the usual 3-year path it then runs 3 years from that date.
There is no "I took the class last week, so I can keep working while EPA processes the form" exception once the old card has expired. EPA's rule is that the refresher, the application, and the new certificate must be in hand before expiration. Plan the 90-day firm clock and the individual recertification clock as separate calendars; they are not the same paperwork.
Lapsed certification: back to the initial path
If the recertification application is not completed , the individual must retake the initial accredited course and reapply for certification, including the third-party exam if the discipline requires one. Supervisor is an exam discipline. A lapsed supervisor does not get a free "late refresher." The 6-month interim clock starts over with the new course completion certificate, the $70 exam fee applies again, and the three-attempts-in-six-months limit in 745.226(b) applies again.
That consequence is the practical reason to treat expiration day as a hard stop. A supervisor who lets the card die on a Friday and tries to "refresh on Monday" is no longer in the recertification lane.
Firm recertification is not a refresher
Firms recertify by submitting the $550 fee every 3 years ( 745.226(f)(7) ). There is no 8-hour firm course. Combined renovation-plus-abatement firms also pay $550 on that 3-year cycle. Tribal firms pay $20. Do not answer a firm-recertification item with "complete the supervisor refresher." The people take refreshers; the company writes a check and files the electronic firm application.
Keep one sentence in your head for exam day: refresher plus electronic application plus fee, before expiration, no third-party exam — unless you missed the window, in which case it is initial course plus exam all over again.