Study guide

8.1 Occupant Protection Plan Requirements

EPA Lead Abatement Supervisor 40 CFR 745 Subpart L

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Facts, Supervisor Role, and Certification Path

1.1 Current Exam Facts 1.2 Supervisor Role, Responsibilities, and On-Site Presence 1.3 Prerequisites, Interim Certification, and the Third-Party Exam

2 Chapter 2: Firm Certification, Recertification, and Enforcement

2.1 Firm Certification vs Individual Certification 2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles 2.3 Suspension, Revocation, TSCA Violations, and Inspections

3 Chapter 3: Title X, 40 CFR 745, State Programs, and HUD Guidelines

3.1 Title X, TSCA 402–406, and 40 CFR 745 Architecture 3.2 Target Housing, Child-Occupied Facilities, and the 1978 Ban 3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity 3.4 HUD Guidelines and Other Documented Methodologies

4 Chapter 4: Lead Health Effects, Blood-Lead Benchmarks, and Liability

4.1 Lead Toxicology, Child and Adult Health Effects, and Blood-Lead Benchmarks 4.2 Liability, Insurance, and Contract Risk for Abatement Supervisors

5 Chapter 5: What Counts as Abatement

5.1 Abatement vs Interim Controls vs RRP 5.2 Lead-Based Paint Definition and Component Language 5.3 Paint-Lead, Dust-Lead, and Soil-Lead Hazard Definitions

6 Chapter 6: Lead Hazard Recognition in the Field

6.1 Deteriorated Paint and Paint in Poor Condition 6.2 Friction, Impact, and Chewable Surface Hazards 6.3 High-Risk Components, Common Areas, and Dust Pathways

7 Chapter 7: Interpreting Inspection and Risk Assessment Reports

7.1 Reading Inspection Reports, XRF Results, and Paint-Chip Data 7.2 Reading Risk Assessment Reports and Selecting Control Options 7.3 Lead Hazard Screens vs Full Risk Assessments

8 Chapter 8: Occupant Protection Plans

8.1 Occupant Protection Plan Requirements 8.2 Relocation, Isolation of Work Areas, and Sensitive Occupants 8.3 Re-Occupancy Criteria, Occupant Notice, and Access Control

9 Chapter 9: Project Notification and Work Plans

9.1 Five-Business-Day Notification Contents and Electronic Filing 9.2 Updated, Canceled, EBL, and Emergency Notifications 9.3 Work Plans, Method Selection Documentation, and Pre-Abatement Walkthrough

10 Chapter 10: Interior Containment Design

10.1 Critical Barriers, Warning Signs, and Regulated Areas 10.2 Negative Air Pressure and HEPA Air-Filtration Units 10.3 Three-Stage Decontamination Units and Worker Flow

11 Chapter 11: Exterior Containment and Site Control

11.1 Exterior Ground Sheeting, Vertical Containment, and Weather Limits 11.2 Daily Exterior Cleanup, Paint-Chip Control, and Occupied/Multi-Family Logistics

12 Chapter 12: Component Replacement, Enclosure, and Encapsulation

12.1 Component Replacement 12.2 Enclosure Systems and Mechanical Fastening 12.3 Encapsulation Products, Unsuitable Surfaces, and Maintenance Schedules

13 Chapter 13: Paint Removal and Restricted Practices

13.1 Wet Scraping, Chemical Removal, and Heat Guns Below 1100°F 13.2 Restricted and Prohibited Practices 13.3 Selecting Methods, Combining Methods, and Documenting Why

14 Chapter 14: Interior Dust Abatement and Cleaning

14.1 Interior Dust Cleanup Sequence 14.2 Pre-Clearance Visual Inspection and When Cleanup Is Not Done

15 Chapter 15: Soil and Exterior Dust Abatement

15.1 Soil-Lead Hazards and Sampling Interpretation for Supervisors 15.2 Soil Removal and Replacement 15.3 Permanent Covering vs Landscaping

16 Chapter 16: OSHA 1926.62 Worker Protection

16.1 PEL, Action Level, and Exposure Assessment 16.2 Respiratory Protection, PPE, and Hygiene Facilities 16.3 Biological Monitoring and Medical Removal Protection 16.4 OSHA Competent Person Duties vs EPA Certified Supervisor Duties

17 Chapter 17: RCRA Waste Management

17.1 Abatement Waste Streams 17.2 TCLP Characterization and D008 17.3 Manifests, TSDF, Accumulation, and the Household Exclusion

18 Chapter 18: Action Levels, Post-Abatement Testing, and Records

18.1 Dust-Lead Action Levels vs Reportable-Level Hazards 18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait 18.3 Failed Samples, Reclean/Retest, Exterior Visual, and Multi-Family Random Sampling 18.4 Abatement Report, 2026 Hazard Statement, Owner Copies, and 3-Year Retention

8.1 Occupant Protection Plan Requirements

Key Takeaways Explain This Topic AI

A written occupant protection plan shall be developed for all abatement projects under 40 CFR 745.227(e)(5)—vacant, occupied, interior, exterior, and soil jobs included.

The plan shall be unique to each residential dwelling or child-occupied facility and developed prior to the abatement; a template copied across 20 units without unit-specific measures fails uniqueness.

The plan shall describe the measures and management procedures taken during the abatement to protect building occupants from exposure to any lead-based paint hazards.

A certified supervisor or project designer prepares the OPP (745.227(e)(5)(ii); 745.223). A worker, inspector, risk assessor, or RRP renovator cannot author it.

The abatement report must include the OPP (745.227(e)(10)(iii)). The certified firm or individual who prepared the report keeps reports and plans at least 3 years and gives copies to the building owner (745.227(i)).

Last updated: August 2026

Why every abatement needs a written occupant protection plan

Quick Answer: 40 CFR 745.227(e)(5) requires a written occupant protection plan (OPP) for all abatement projects . The plan shall be unique to each residential dwelling or child-occupied facility, developed prior to the abatement, and shall describe the measures and management procedures taken during the abatement to protect building occupants from exposure to any lead-based paint hazards. A certified supervisor or project designer prepares it. Copying one template across 20 units without unit-specific measures fails uniqueness. The plan goes into the abatement report (745.227(e)(10)(iii)); the firm or individual who prepared it keeps reports and plans at least 3 years and gives copies to the building owner (745.227(i)).

The OPP is the supervisor's written command for how people who live in, visit, or use the building will not be exposed to lead-based paint hazards while the crew is creating dust and debris. It is not optional on vacant units, exterior-only jobs, soil jobs, or supposedly small abatements. The trigger is the abatement , not whether anyone is sleeping in the unit tonight. A studio with no one home still needs a plan that says how returning occupants, adjacent neighbors, pets, and visitors are kept out of the work area until that work area is cleared.

40 CFR 745.227(e)(5) is short. Memorize the procedure, then the author:

A written occupant protection plan shall be developed for all abatement projects .

The plan shall be unique to each residential dwelling or child-occupied facility and be developed prior to the abatement. It shall describe the measures and management procedures that will be taken during the abatement to protect the building occupants from exposure to any lead-based paint hazards.

A certified supervisor or project designer shall prepare the occupant protection plan.

EPA does not publish a required form, a page count, or a 12-box checklist. The exam tests whether you know those three duties and whether the plan is actually unique, timely, and specific enough to protect occupants. HUD's Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing , Chapter 8 (Resident Protection and Worksite Preparation), is a documented methodology under 745.227(a)(3) for how to protect residents. Use it to fill in the measures. Do not treat the Guidelines as a substitute for the written plan 745.227(e)(5) requires, and do not treat an RRP pamphlet as an OPP.

This chapter is about what the OPP must say and how it is managed. How to build critical barriers, negative air, and a three-stage decontamination unit is Chapter 10. How clearance samples are collected is Chapter 18. The 5-business-day notice to EPA is Chapter 9. Keep those files separate.

Who is allowed to write it

40 CFR 745.223 defines certified supervisor as the individual trained and certified to supervise and conduct abatements, and to prepare occupant protection plans and abatement reports . Preparing the OPP is not a side hobby. It is in the definition of the credential you are sitting for.

A certified project designer is trained and certified to prepare abatement project designs, occupant protection plans, and abatement reports. On a large or complicated job the owner may hire a designer to write the OPP. That does not replace the certified supervisor who must be physically onsite during all work-site preparation and post-abatement cleanup (745.227(e)(2)). Implementation of the OPP is a core reason the supervisor must control prep: isolation, signs, HVAC shutdown, belongings, and access control are prep. A designer in an office cannot be the supervisor by phone during containment build.

Who May prepare the OPP under 745.227(e)(5)? May be the on-site supervisor for prep and cleanup?

Certified supervisor Yes Yes

Certified project designer Yes No. Designer is not the 745.227(e)(2) on-site supervisor.

  • Certified abatement worker No No
  • Certified inspector or risk assessor No No
  • RRP certified renovator No — wrong subpart and discipline No
  • Uncertified owner, manager, or OSHA competent person No No

Some authorized-state programs require a project designer above a dwelling count. That is a state overlay . EPA's own sentence is supervisor or project designer for every abatement, of any size. Do not invent a federal five-unit designer rule.

Worked example — worker writes the plan. The crew lead is a certified worker. The certified supervisor is 90 minutes away and texts, use last month's OPP, just change the address. The worker fills in the address and hangs plastic. Two failures: a worker is not an author under (e)(5)(ii), and preparation requires the supervisor onsite . Changing the address on last month's plan also fails uniqueness if the rooms, occupants, and measures are still last month's.

Worked example — designer-authored plan, supervisor on the ground. A project designer writes a unit-specific OPP for a 12-unit walk-up. The certified supervisor reviews it, keeps it on site, and is physically present while the crew builds the isolation the plan describes. That pairing is legal. The designer does not have to stand at the tape gun. The supervisor does.

Unique to each dwelling or child-occupied facility

Unique means the plan is written for this residential dwelling or this child-occupied facility, not for the job as a whole. A 20-unit building is 20 dwellings. A daycare classroom in a pre-1978 church is a child-occupied facility and needs its own plan even if the sanctuary is not being abated.

A company template is a starting point, not a finished OPP. Boilerplate can list the firm's wet-scrape method, HEPA vacuum, and decontamination sequence. The plan fails uniqueness when it does not identify the measures this unit actually needs.

Element that must be unit-specific Why a copied paragraph fails

Street address, unit number, and rooms or components being abated Unit 3B is not Unit 3A. Window replacement in a bedroom is not soil cover in the rear yard.

Occupancy during work (vacant, stay-in-place, fully relocated) A vacant unit still needs access control for returning occupants and neighbors. An occupied unit needs named isolation or a relocation location.

Sensitive occupants (children under 6, pregnant occupants, COF visitors) A seniors-only unit and a family with a toddler are not the same exposure problem.

Isolation path, remaining living space, and fire exits A shotgun house with one hallway is not a three-bedroom unit with a back stair.

HVAC, belongings, pets, and common-area traffic One unit's furnace feeds three apartments. A copied HVAC N/A line is a dust-distribution plan.

Template trap. A supervisor photocopies one OPP, writes Units 1–20 on the header, and uses the same occupants will remain in the rear bedroom sentence in every file. Unit 12 is a studio with no rear bedroom. Unit 7 has a child under 6 and a pregnant occupant. Unit 19 is vacant. That packet is not unique to each residential dwelling. EPA will treat it as one plan reused 20 times. Exam items will too.

Uniqueness is not a demand to rewrite the firm's cleaning sequence 20 times. It is a demand that the measures and management procedures that protect occupants match the layout, occupancy, and work in that dwelling or COF.

Developed prior to the abatement — not during the first strip of tape

Prior to the abatement means the written plan exists before abatement activities begin. Work-site preparation is part of abatement (745.223: abatement includes all preparation, cleanup, disposal, and post-abatement testing associated with the measures). If plastic is going up, the OPP should already be on site and in the supervisor's hands.

Do not write the plan after the windows are out because the crew knew what it was doing. Do not start prep while the designer is finishing the write-up tonight. Do not treat the EPA 5-business-day notification as the OPP. The notice tells the Agency who is working where. The OPP tells the crew and the occupants how people are protected.

If the scope changes — a one-bedroom window job becomes whole-unit interior demolition — update the OPP before the new work starts. An obsolete plan that still says occupants will stay in the living room after you have just contained the living room is not the plan 745.227(e)(5) required.

The supervisor's on-site duty during all work-site preparation and post-abatement cleanup (745.227(e)(2)) is how the OPP is implemented. Isolation, warning signs, HVAC shutdown, furniture wrap, and decontamination setup are the measures the plan promised. Cleanup is what makes the work area ready for the inspector. Availability by phone during mid-removal does not cover those two windows.

What the plan must describe

745.227(e)(5) does not list a table of contents. It requires measures (the physical things you will do) and management procedures (who does them, when, and how occupants are directed). A plan that says only standard containment will be used describes neither.

At a minimum, a defensible OPP names the following. Containment construction (6-mil layers, zipper flaps, negative-air sizing) is Chapter 10. The OPP's job is to say that isolation will exist, what it must accomplish for occupants, and how the supervisor will manage people around it.

  • Topic the OPP should state What describe the measures looks like
  • Work area Which rooms, components, exterior elevations, or soil areas are regulated
  • Occupant location Relocated off-site, stay-in-place outside containment, or vacant with controlled re-entry
  • Isolation Physical barriers that keep occupants out of the work area ; not a verbal warning

Access control Warning signs, controlled entries, decontamination path, no occupant shortcut through the contained room

  • HVAC Shutdown or isolation so the furnace or air handler does not spread dust
  • Belongings Moved out of the work area or covered so they will not be contaminated
  • Pets and visitors Kept out of the work area; other trades do not wander in

Sensitive occupants How children under 6 and pregnant occupants are protected if anyone remains in the dwelling

Re-occupancy of the work area No return until post-abatement visual and dust sampling by a certified inspector or risk assessor are below action levels

Multi-family extras Hallways, stairs, fire exits, adjacent units, common-area users

Worked example — occupied one-bedroom window abatement. The OPP for 14 Elm St., Apt. 2 names: living-room and bedroom windows as the work area; occupants (adults, no child under 6) remaining in the kitchen and bath, which have a second door to the stair; a taped critical barrier at the hall with a warning sign; HVAC supply and return in the work rooms sealed; furniture in the work rooms moved or wrapped; the cat boarded off-site; no re-entry to the work rooms until an independent certified inspector or risk assessor completes visual and dust sampling below the 5/40/100 action levels. That is unique. A sentence that says see company SOP is not.

The plan is a jobsite document, a report exhibit, and a 3-year record

After the job, a certified supervisor or project designer prepares an abatement report (745.227(e)(10)). Item (iii) is the occupant protection plan prepared pursuant to paragraph (e)(5) . If the report has no OPP, or attaches a generic template that was never used on this dwelling, the report is incomplete.

Recordkeeping under 745.227(i): all reports or plans required in this section shall be maintained by the certified firm or individual who prepared the report for no fewer than 3 years . That firm or individual shall also provide copies of these reports to the building owner who contracted for its services. Keep the OPP with the report. Give the owner a copy. Three years is the EPA retention clock — not a 12-year HUD clearance-file myth.

Keep a working copy on the site while work is underway so the crew, the owner, and an inspector can see how occupants are supposed to be protected. A plan that exists only in the office file cabinet is not managing the job.

What this section is not. An RRP Renovate Right pamphlet is pre-renovation education under Subpart E; it is not an OPP. OSHA's competent person under 29 CFR 1926.62 does not become the OPP author. Authorized-state programs may add content; they do not erase 745.227(e)(5).

Official sources: 40 CFR 745.227(e)(5), (e)(10), (i) ; 40 CFR 745.223 ; HUD Guidelines Chapter 8 as a documented methodology under 745.227(a)(3).

Loading diagram... Occupant Protection Plan from Drafting through the Abatement Report