Study guide
16.2 Respiratory Protection, PPE, and Hygiene Facilities
EPA Lead Abatement Supervisor 40 CFR 745 Subpart L
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Facts, Supervisor Role, and Certification Path
1.1 Current Exam Facts 1.2 Supervisor Role, Responsibilities, and On-Site Presence 1.3 Prerequisites, Interim Certification, and the Third-Party Exam
2 Chapter 2: Firm Certification, Recertification, and Enforcement
2.1 Firm Certification vs Individual Certification 2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles 2.3 Suspension, Revocation, TSCA Violations, and Inspections
3 Chapter 3: Title X, 40 CFR 745, State Programs, and HUD Guidelines
3.1 Title X, TSCA 402–406, and 40 CFR 745 Architecture 3.2 Target Housing, Child-Occupied Facilities, and the 1978 Ban 3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity 3.4 HUD Guidelines and Other Documented Methodologies
4 Chapter 4: Lead Health Effects, Blood-Lead Benchmarks, and Liability
4.1 Lead Toxicology, Child and Adult Health Effects, and Blood-Lead Benchmarks 4.2 Liability, Insurance, and Contract Risk for Abatement Supervisors
5 Chapter 5: What Counts as Abatement
5.1 Abatement vs Interim Controls vs RRP 5.2 Lead-Based Paint Definition and Component Language 5.3 Paint-Lead, Dust-Lead, and Soil-Lead Hazard Definitions
6 Chapter 6: Lead Hazard Recognition in the Field
6.1 Deteriorated Paint and Paint in Poor Condition 6.2 Friction, Impact, and Chewable Surface Hazards 6.3 High-Risk Components, Common Areas, and Dust Pathways
7 Chapter 7: Interpreting Inspection and Risk Assessment Reports
7.1 Reading Inspection Reports, XRF Results, and Paint-Chip Data 7.2 Reading Risk Assessment Reports and Selecting Control Options 7.3 Lead Hazard Screens vs Full Risk Assessments
8 Chapter 8: Occupant Protection Plans
8.1 Occupant Protection Plan Requirements 8.2 Relocation, Isolation of Work Areas, and Sensitive Occupants 8.3 Re-Occupancy Criteria, Occupant Notice, and Access Control
9 Chapter 9: Project Notification and Work Plans
9.1 Five-Business-Day Notification Contents and Electronic Filing 9.2 Updated, Canceled, EBL, and Emergency Notifications 9.3 Work Plans, Method Selection Documentation, and Pre-Abatement Walkthrough
10 Chapter 10: Interior Containment Design
10.1 Critical Barriers, Warning Signs, and Regulated Areas 10.2 Negative Air Pressure and HEPA Air-Filtration Units 10.3 Three-Stage Decontamination Units and Worker Flow
11 Chapter 11: Exterior Containment and Site Control
11.1 Exterior Ground Sheeting, Vertical Containment, and Weather Limits 11.2 Daily Exterior Cleanup, Paint-Chip Control, and Occupied/Multi-Family Logistics
12 Chapter 12: Component Replacement, Enclosure, and Encapsulation
12.1 Component Replacement 12.2 Enclosure Systems and Mechanical Fastening 12.3 Encapsulation Products, Unsuitable Surfaces, and Maintenance Schedules
13 Chapter 13: Paint Removal and Restricted Practices
13.1 Wet Scraping, Chemical Removal, and Heat Guns Below 1100°F 13.2 Restricted and Prohibited Practices 13.3 Selecting Methods, Combining Methods, and Documenting Why
14 Chapter 14: Interior Dust Abatement and Cleaning
14.1 Interior Dust Cleanup Sequence 14.2 Pre-Clearance Visual Inspection and When Cleanup Is Not Done
15 Chapter 15: Soil and Exterior Dust Abatement
15.1 Soil-Lead Hazards and Sampling Interpretation for Supervisors 15.2 Soil Removal and Replacement 15.3 Permanent Covering vs Landscaping
16 Chapter 16: OSHA 1926.62 Worker Protection
16.1 PEL, Action Level, and Exposure Assessment 16.2 Respiratory Protection, PPE, and Hygiene Facilities 16.3 Biological Monitoring and Medical Removal Protection 16.4 OSHA Competent Person Duties vs EPA Certified Supervisor Duties
17 Chapter 17: RCRA Waste Management
17.1 Abatement Waste Streams 17.2 TCLP Characterization and D008 17.3 Manifests, TSDF, Accumulation, and the Household Exclusion
18 Chapter 18: Action Levels, Post-Abatement Testing, and Records
18.1 Dust-Lead Action Levels vs Reportable-Level Hazards 18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait 18.3 Failed Samples, Reclean/Retest, Exterior Visual, and Multi-Family Random Sampling 18.4 Abatement Report, 2026 Hazard Statement, Owner Copies, and 3-Year Retention
16.2 Respiratory Protection, PPE, and Hygiene Facilities
Key Takeaways Explain This Topic AI
Respirators used under 1926.62 must be NIOSH-approved and selected under a 29 CFR 1910.134 program: medical evaluation, fit testing, training, and the rest of the incorporated 1910.134 paragraphs. HEPA filters (N/R/P100 on non-powered APRs) are required for lead.
A half-mask air-purifying respirator has a typical assigned protection factor (APF) of 10, which covers up to 10× PEL (500 µg/m³) if it fits and is used correctly. Group 2 assumed exposures (>500 µg/m³) need a higher APF (full facepiece APF 50 or a PAPR, not a half-mask). Provide a PAPR if the employee requests one and it is adequate.
Protective clothing is provided at no cost when exposure is above the PEL without regard to respirators, and as interim protection on trigger tasks. Clean at least weekly; daily if unprotected exposure is over 200 µg/m³. Do not blow, shake, or take lead home on clothes.
Where employees are exposed above the PEL without regard to respirators: no food, beverage, tobacco, or cosmetics in that area; change areas with separate storage; handwashing; showers where feasible. Employees shall not leave the workplace wearing the protective clothing worn on shift.
Chapter 10's three-stage dirty/shower/clean layout is how accredited crews implement those OSHA hygiene rules. 745.227 does not name the three rooms; missing change areas and a sandwich in the regulated area are still OSHA citations.
Last updated: August 2026
Respirators supplement controls; they do not retire the 1910.134 program
Quick Answer: When 1926.62 requires a respirator, the employer provides a NIOSH-approved respirator under a 29 CFR 1910.134 program — medical evaluation , fit test , training , and the other incorporated 1910.134 paragraphs. Use HEPA filters ( N100 / R100 / P100 on non-powered air-purifying respirators; HEPA on PAPRs). A half-mask air-purifying respirator has a typical assigned protection factor (APF) of 10 , which matches Group 1's assumed band of >PEL but ≤10× PEL (500 µg/m³) . Group 2 assumed >500 µg/m³ needs a higher APF (full facepiece APF 50 or a PAPR , not a half-mask). Provide a PAPR when an employee chooses one and it will provide adequate protection. Protective clothing, change areas , handwashing , showers where feasible , and no food, beverage, tobacco, or cosmetics apply where exposure is above the PEL without regard to respirators . Do not take lead home on clothes. Chapter 10's three-stage decon is how you build that hygiene; 745.227 does not name the three rooms .
Section 16.1 set the air numbers and the trigger-task bands. This section is what the employee actually wears and where the employee actually eats. The exam bait is a dust mask from the hardware aisle, a half-mask on a needle gun without collection, lunch on the drop cloth “because we have respirators,” and sending the crew home in dirty coveralls.
When a respirator is required — and what program it rides on
1926.62(f)(1) requires an appropriate respirator during: periods when exposure exceeds the PEL ; operations where engineering and work-practice controls are not sufficient to reach the PEL; periods when an employee requests a respirator; and interim protection on (d)(2) trigger tasks.
The program is not “the box says NIOSH.” (f)(2) incorporates 1910.134(b) through (d) (except (d)(1)(iii)) and (f) through (m) . In field language that means: written program, medical evaluation before fit testing, annual fit test for tight-fitting facepieces, training, inspection, storage, and a change-out plan. If an employee has breathing difficulty during fit testing or use, (f)(2)(ii) sends that employee to the medical-exam track in (j)(3)(i)(B).
(f)(3) selection rules that show up on this exam:
Select respirators using 1910.134 Table 1 APFs.
Provide a full facepiece instead of a half-mask when lead aerosols may cause eye or skin irritation at the use concentrations.
Provide HEPA filters for powered and non-powered air-purifying respirators.
Provide a PAPR when the employee chooses one and it will provide adequate protection.
Surgical masks, one-strap nuisance dust masks, and “the N95 we use for drywall” are not a lead respirator. Lead needs a 100-series / HEPA filter on an air-purifying respirator, on a facepiece that was fit-tested , on a person who was medically evaluated .
APF table — match the assumed band to the facepiece
Maximum use concentration for a respirator = PEL × APF , provided the device is NIOSH-approved, the program is real, and the assumed or measured concentration is in that band.
Respirator (NIOSH-approved, HEPA / 100-series where APR) Typical APF (1910.134 Table 1) MUC at PEL 50 µg/m³ Trigger-task fit
Half-mask air-purifying (elastomeric) with N/R/P100 10 500 µg/m³ (10× PEL) Group 1 assumed band
Full-facepiece air-purifying with N/R/P100 50 2,500 µg/m³ Often Group 2 ; at the Group 3 assumed ceiling — do not use it as if the true concentration cannot exceed 2,500
PAPR half-mask 50 2,500 µg/m³ Employee-requested upgrade when adequate; Group 2
PAPR helmet/hood 25 (or 1,000 if the manufacturer demonstrates) 1,250 µg/m³ (or higher if 1,000 APF) Loose-fitting option; APF 25 is the default unless the manufacturer has the higher demonstration
PAPR full facepiece 1,000 50,000 µg/m³ High-dust Group 3 work when it is adequate
Pressure-demand SAR or SCBA 1,000 / 10,000 Far above Group 3 Abrasive blasting and other very high concentrations
Group 1 assumed ≤500 µg/m³ is why accredited courses still say “half-mask HEPA” for heat guns, manual scrape, and shrouded power tools until the cassette says otherwise . Group 2 assumed >500 µg/m³ is why a half-mask is the wrong answer for unshrouded power-tool cleaning, rivet busting, lead burning, and moving a blast enclosure: APF 10 cannot cover a number above 500 . Select a respirator whose APF covers that assumed exposure — typically APF 50 (full facepiece or PAPR) or better. Group 3 assumed >2,500 µg/m³ is above the MUC of an APF-50 device; blasting, welding, cutting, and torch burning need a higher-APF system (and torch burning is separately prohibited by EPA on LBP abatement).
Worked example — employee asks for a PAPR on Group 1 wet scrape. Unprotected monitoring later comes back at 90 µg/m³. A half-mask APF 10 would be adequate on that number (MUC 500). The employee still gets the PAPR if it is adequate, because (f)(3)(ii) is a choice rule, not a “only if the half-mask failed” rule. Comfort, facial hair that prevents a tight seal (which is a disqualification for a tight-fitting facepiece, not a reason to skip protection), heat, and medical restrictions are why the PAPR sentence exists.
Clothing: weekly, daily above 200, never shaken out at home
1926.62(g) — provide at no cost and assure use of clothing that keeps lead off the employee and the employee's garments when exposure is above the PEL without regard to respirators , when lead compounds may irritate skin or eyes, and as interim protection on trigger tasks. Typical issue: coveralls or similar full-body clothing; gloves, hats, and shoes or disposable shoe covers ; face shields or vented goggles as needed.
Clothing rule The number or practice Exam fail
Clean and dry issue At least weekly ; daily if unprotected exposure is over 200 µg/m³ as an 8-hour TWA “We issued them once this month”
Who launders The employer provides cleaning, laundering, and disposal Sending dirty coveralls home with the worker
Where they come off Only in change areas at the end of the shift Stripping in the parking lot
Containers Closed container in the change area; specified DANGER lead-contaminated clothing label An open trash bag in the hall
Dust removal Prohibit blowing, shaking, or any means that disperses lead into the air Compressed air on sleeves; snapping coveralls
Employees shall not leave the workplace wearing the protective clothing or equipment required during the shift. That is the take-home rule in one sentence. Chapter 4 already told you a toddler at home is an ingestion pathway. This section is the OSHA citation that makes that pathway an employer failure.
Hygiene: the respirator does not make the sandwich legal
1926.62(i)(1) — in areas where employees are exposed above the PEL without regard to the use of respirators , food or beverage is not present or consumed , tobacco products are not present or used , and cosmetics are not applied . The half-mask on the chin during lunch is not a loophole. Unprotected exposure above 50 µg/m³ is the trigger, not “whether anyone is hungry.”
Facility Who it is for What it must do
Change areas Employees above the PEL, and trigger-task interim protection, without regard to respirators Separate storage for protective clothing and street clothes so they do not cross-contaminate
Showers Employees above the PEL, where feasible Employees shower at the end of the shift when showers are available; employer supplies cleansing agents and towels
Eating areas Employees above the PEL without regard to respirators As free as practicable of lead; workers wash hands and face before eating, drinking, smoking, or applying cosmetics; do not enter in dirty protective clothing unless surface dust was removed by vacuuming, a downdraft booth, or another method that limits dispersion
Handwashing Employees exposed to lead (1926.51(f) as well as 1926.62) Always. Where showers are not provided, wash hands and face at the end of the shift
Showers are where feasible , not “never on residential work.” A 40-unit gut with a trailer on the lot can have showers. A one-bathroom occupied unit may not; then hand-and-face washing at shift end is not optional. Do not tell the exam that residential abatement has no hygiene duties because a three-stage shower trailer would not fit in the hallway.
Overlap with Chapter 10 — three rooms that implement (i), not a 745.227 sentence
Chapter 10.3 taught the accredited dirty / shower / clean layout: enter through the clean room, work dirty, HEPA-vacuum and remove PPE in the equipment room, shower when that stage exists, dress in street clothes in the clean room, waste on a separate load-out path. 745.227 does not name those three rooms. 1926.62(i) and (g) are why the rooms exist when exposures warrant: change areas, no take-home clothing, no lunch in the over-PEL space, handwashing, showers where feasible.
The exam will offer two wrong exits from that overlap. One: “EPA requires a three-stage decon in 745.227, so OSHA hygiene is redundant.” False — EPA never wrote the three rooms. Two: “EPA is silent, so we eat in the contained bedroom and drive home in Tyveks.” Also false — OSHA still cites the sandwich and the take-home clothes. Build the Chapter 10 flow so that (i) and (g) are physically true.
1926.62(m) warning signs in each work area where employee exposure is above the PEL : DANGER / LEAD / MAY DAMAGE FERTILITY OR THE UNBORN CHILD / CAUSES DAMAGE TO THE CENTRAL NERVOUS SYSTEM / DO NOT EAT, DRINK OR SMOKE IN THIS AREA . HUD Chapter 8 entry signs for occupants (Chapter 10.1) are a second layer. Neither is a substitute for a change area.
Worked example — occupied unit, Group 1 windows. Containment from Chapter 10 is up. Crew in half-mask P100s, coveralls, shoe covers. Unprotected assessment is still pending, so treat as over the PEL. Hygiene that matches (i): no coffee on the sill; change area at the dirty end of the decon with separate street-clothes storage; HEPA off the coveralls before they come off; hands and face washed before anyone cracks a lunch box on the clean side; coveralls bagged, not worn to the truck. Skipping the change area because “it is only windows” is how take-home dust starts.
Supervisor decision test. (1) Is there a 1910.134 program, or just a box of half-masks? (2) Does the APF cover the assumed or measured unprotected concentration? (3) Did the employee who asked for a PAPR get one if it is adequate? (4) Are clothing, change areas, and no-eating rules keyed off exposure without the respirator? (5) Would a child at the worker's house meet that worker's dirty sleeves at 4 p.m.?
Official sources: 29 CFR 1926.62(f), (g), (i), (m) ; 29 CFR 1910.134 (respirator program and APF table).