Study guide

3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity

EPA Lead Abatement Supervisor 40 CFR 745 Subpart L

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Facts, Supervisor Role, and Certification Path

1.1 Current Exam Facts 1.2 Supervisor Role, Responsibilities, and On-Site Presence 1.3 Prerequisites, Interim Certification, and the Third-Party Exam

2 Chapter 2: Firm Certification, Recertification, and Enforcement

2.1 Firm Certification vs Individual Certification 2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles 2.3 Suspension, Revocation, TSCA Violations, and Inspections

3 Chapter 3: Title X, 40 CFR 745, State Programs, and HUD Guidelines

3.1 Title X, TSCA 402–406, and 40 CFR 745 Architecture 3.2 Target Housing, Child-Occupied Facilities, and the 1978 Ban 3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity 3.4 HUD Guidelines and Other Documented Methodologies

4 Chapter 4: Lead Health Effects, Blood-Lead Benchmarks, and Liability

4.1 Lead Toxicology, Child and Adult Health Effects, and Blood-Lead Benchmarks 4.2 Liability, Insurance, and Contract Risk for Abatement Supervisors

5 Chapter 5: What Counts as Abatement

5.1 Abatement vs Interim Controls vs RRP 5.2 Lead-Based Paint Definition and Component Language 5.3 Paint-Lead, Dust-Lead, and Soil-Lead Hazard Definitions

6 Chapter 6: Lead Hazard Recognition in the Field

6.1 Deteriorated Paint and Paint in Poor Condition 6.2 Friction, Impact, and Chewable Surface Hazards 6.3 High-Risk Components, Common Areas, and Dust Pathways

7 Chapter 7: Interpreting Inspection and Risk Assessment Reports

7.1 Reading Inspection Reports, XRF Results, and Paint-Chip Data 7.2 Reading Risk Assessment Reports and Selecting Control Options 7.3 Lead Hazard Screens vs Full Risk Assessments

8 Chapter 8: Occupant Protection Plans

8.1 Occupant Protection Plan Requirements 8.2 Relocation, Isolation of Work Areas, and Sensitive Occupants 8.3 Re-Occupancy Criteria, Occupant Notice, and Access Control

9 Chapter 9: Project Notification and Work Plans

9.1 Five-Business-Day Notification Contents and Electronic Filing 9.2 Updated, Canceled, EBL, and Emergency Notifications 9.3 Work Plans, Method Selection Documentation, and Pre-Abatement Walkthrough

10 Chapter 10: Interior Containment Design

10.1 Critical Barriers, Warning Signs, and Regulated Areas 10.2 Negative Air Pressure and HEPA Air-Filtration Units 10.3 Three-Stage Decontamination Units and Worker Flow

11 Chapter 11: Exterior Containment and Site Control

11.1 Exterior Ground Sheeting, Vertical Containment, and Weather Limits 11.2 Daily Exterior Cleanup, Paint-Chip Control, and Occupied/Multi-Family Logistics

12 Chapter 12: Component Replacement, Enclosure, and Encapsulation

12.1 Component Replacement 12.2 Enclosure Systems and Mechanical Fastening 12.3 Encapsulation Products, Unsuitable Surfaces, and Maintenance Schedules

13 Chapter 13: Paint Removal and Restricted Practices

13.1 Wet Scraping, Chemical Removal, and Heat Guns Below 1100°F 13.2 Restricted and Prohibited Practices 13.3 Selecting Methods, Combining Methods, and Documenting Why

14 Chapter 14: Interior Dust Abatement and Cleaning

14.1 Interior Dust Cleanup Sequence 14.2 Pre-Clearance Visual Inspection and When Cleanup Is Not Done

15 Chapter 15: Soil and Exterior Dust Abatement

15.1 Soil-Lead Hazards and Sampling Interpretation for Supervisors 15.2 Soil Removal and Replacement 15.3 Permanent Covering vs Landscaping

16 Chapter 16: OSHA 1926.62 Worker Protection

16.1 PEL, Action Level, and Exposure Assessment 16.2 Respiratory Protection, PPE, and Hygiene Facilities 16.3 Biological Monitoring and Medical Removal Protection 16.4 OSHA Competent Person Duties vs EPA Certified Supervisor Duties

17 Chapter 17: RCRA Waste Management

17.1 Abatement Waste Streams 17.2 TCLP Characterization and D008 17.3 Manifests, TSDF, Accumulation, and the Household Exclusion

18 Chapter 18: Action Levels, Post-Abatement Testing, and Records

18.1 Dust-Lead Action Levels vs Reportable-Level Hazards 18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait 18.3 Failed Samples, Reclean/Retest, Exterior Visual, and Multi-Family Random Sampling 18.4 Abatement Report, 2026 Hazard Statement, Owner Copies, and 3-Year Retention

3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity

Key Takeaways Explain This Topic AI

In a State or Indian Country without an authorized program under 745.324, EPA administers Subpart L: EPA issues the individual supervisor certificate and the firm certificate, and 745.227 is the work-practice rule.

An EPA-authorized State or Tribe runs its own certification, accreditation, and work practices in lieu of EPA in that jurisdiction. Working across a state line can require that jurisdiction’s credential even if you already hold EPA or another state’s card.

Authorized programs must be at least as protective as the federal program and provide adequate enforcement (745.324(e)(2)). More-stringent state rules win; they cannot be weaker than Subpart L.

Reciprocity into the EPA-administered program: 745.226(a)(1)(ii) lets an individual apply electronically to EPA with a copy of a valid lead-based paint activities certification from an EPA-authorized State or Tribal program.

Always verify the jobsite’s current administrator on EPA’s lead authorized-programs list before mobilizing. Authorizations change; do not rely on a memorized state count from an old textbook.

Last updated: August 2026

EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity

Quick answer: Who issues the card is a function of where the work occurs. If the State or Tribe has an EPA-authorized lead-based paint activities program under Subpart Q , that program certifies supervisors and firms and writes the work practices you must follow on that jobsite. If it does not , EPA administers Subpart L . 745.226(a)(1)(ii) is the reciprocity path into EPA’s program from an authorized-state certificate. It is not automatic nationwide reciprocity.

A supervisor who treats an EPA certificate as a national license will eventually start an abatement in an authorized State without that State’s credential. That is how firms collect stop-work orders.

Two administrators, one federal floor

TSCA 404 told EPA to authorize States and Indian Tribes to run their own programs. Subpart Q is the procedure. 745.324(e)(2) is the approval test. EPA authorizes the program only if:

The State or Tribal program is at least as protective of human health and the environment as the corresponding federal program under Subpart E or Subpart L, or both ; and

The program provides adequate enforcement .

At least as protective means the authorized program may match Subpart L or go further — lower dust-lead numbers, extra notification, longer training, a State-only discipline, licensing of firms that EPA would not require. More-stringent state rules win. An authorized State cannot certify you to skip 745.227’s prohibited practices. It can add a practice EPA does not require. On a job in that State, you follow the State rule set, which already had to clear the federal floor.

745.325 lists the program elements an authorized lead-based paint activities program must contain: accreditation of training, certification of individuals, work practice standards, a requirement that LBP activities be conducted by appropriately certified contractors, and the infrastructure to run the program. Abatement work practices in an authorized State must still permanently eliminate LBP hazards (dust-lead to below action levels), include post-abatement dust sampling against the State’s action levels, and produce an abatement report.

Abatement authorization and RRP authorization are separate. A State can be authorized for Subpart L (abatement) and not for Subpart E (RRP), or the reverse. EPA may authorize one and disapprove the other ( 745.324(e)(4) ). Do not assume that because the State runs RRP it also issues your supervisor card, or the other way around. Check the abatement / lead-based paint activities column.

Who issues the card on this jobsite

Jobsite location Who certifies the supervisor and firm Which work practices

State or Indian Country without an authorized LBP-activities program EPA (745.226), including third-party exam for supervisor 40 CFR 745.227

State or Tribe with an authorized LBP-activities program That State or Tribe That program’s standards (at least as protective as Subpart L)

Work that crosses a state line or moves from an EPA state into an authorized state Credential required by the jurisdiction of the jobsite The jobsite’s program

Federal facility 745.220(c): comply with all Federal, State, interstate, and local lead requirements, including Subpart L Federal plus whatever State/local rules attach to that property

745.220(b) already told you Subpart L applies only where there is no authorized program under 745.324 . In an authorized State, showing an EPA supervisor card to the State inspector is not compliance unless that State has chosen to accept it. Many do not, or they accept it only after a reciprocity filing of their own.

What “EPA-administered” looks like in 2026

EPA still runs the federal lead-based paint activities program in jurisdictions that have not taken authorization. Historically that is a minority of States; most States run their own authorized abatement programs. EPA’s program-overview page (listing current as of 2026) identified EPA-administered States as Alaska, Arizona, Florida, Idaho, Montana, Nevada, New Mexico, New York, South Carolina, South Dakota, and Wyoming , with all other States authorized, plus certain authorized tribal programs (including the Cherokee Nation and specified Minnesota tribes). Treat that as a snapshot. Authorizations are granted, updated, and — under 745.324(i) — can be withdrawn. Before you mobilize, open EPA’s current authorized-programs list at epa.gov/lead (or the State lead-program page linked from it) and confirm who issues the card for that address , including whether the site is in Indian Country with a tribal program.

Do not memorize a count as if it were 745.223. The exam cares that you know to check , that unauthorized jurisdictions use EPA , and that authorized jurisdictions use the State or Tribe .

Reciprocity: 745.226(a)(1)(ii) is an EPA application path

Individuals seeking EPA certification have two electronic application routes under 745.226(a)(1) :

(i) Show that they meet the federal training, exam, and experience requirements in 745.226(b) or (c) for the discipline; or

(ii) Submit an electronic application attaching a copy of a valid lead-based paint activities certification (or equivalent) from a State or Tribal program that has been authorized by EPA pursuant to Subpart Q .

Route (ii) is reciprocity into EPA’s administered program . A supervisor who already holds a valid authorized-state supervisor certificate can apply to EPA without re-taking the federal path from scratch, attaching that State/Tribal certificate. EPA still issues its certificate for work in EPA-administered jurisdictions. Fees in 745.238 still apply.

What route (ii) is not :

A wallet card that automatically works in every authorized State.

A way to skip the jobsite State’s application if that State does not grant reciprocity.

Reciprocity from an unauthorized State’s homemade card (there is no such federal card except EPA’s).

Reciprocity from an RRP renovator certificate into an abatement supervisor certificate. Different subparts, different disciplines.

State-to-state reciprocity is a State decision. Some authorized States will endorse another authorized State’s certificate, some will require their own course or exam, and some will not reciprocate at all. Read that State’s lead-program page. Do not bid a three-state swing-state contract on one EPA card and hope.

Crossing a state line — the mobilization checklist

Before the trucks leave the yard:

Pin the jobsite. County, city, and whether the parcel is Indian Country. A tribal program can cover a site inside a State that is otherwise EPA-administered or State-authorized.

Look up the current administrator on EPA’s list and the State or tribal lead-program site. Confirm abatement / LBP activities , not only RRP.

Match credentials. EPA supervisor + EPA firm for EPA-administered work. State supervisor + State firm (or whatever that State calls them) for authorized-state work. If the firm is certified only by EPA, it is not a certified firm in an authorized State that issues its own firm licenses.

Read extra stringency. Notification portals, waiting periods, dust-lead numbers, and waste rules may be tighter than 745.227. The stricter applicable requirement is the one you plan to.

If you need EPA work after holding only a State card , use 745.226(a)(1)(ii) in time for EPA to issue the federal certificate. Do not start EPA-jurisdiction work on a State card and “file later.”

Federal facilities: 745.220(c) still stacks federal, State, interstate, and local duties. A VA or military housing job can require both the federal work-practice floor and the host State’s credentialing if that is how the site is administered.

Enforcement overlay

After authorization, 745.324(f)(3) makes it an unlawful act under TSCA sections 15 and 409 to fail or refuse to comply with the authorized program. EPA keeps oversight and can withdraw authorization ( 745.324(g)–(i) ). Your field problem is simpler: the inspector who walks onto the site works for whoever currently runs the program there . Have that issuer’s certificate in the job box, not last year’s certificate from a different State.

OSHA 1926.62 still applies on every abatement regardless of which environmental agency issued the lead card. State OSHA-plan States may have their own lead-in-construction rule as well. That is Chapter 16; do not let it distract you from the Subpart Q credential question.