Study guide
3.4 HUD Guidelines and Other Documented Methodologies
EPA Lead Abatement Supervisor 40 CFR 745 Subpart L
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Facts, Supervisor Role, and Certification Path
1.1 Current Exam Facts 1.2 Supervisor Role, Responsibilities, and On-Site Presence 1.3 Prerequisites, Interim Certification, and the Third-Party Exam
2 Chapter 2: Firm Certification, Recertification, and Enforcement
2.1 Firm Certification vs Individual Certification 2.2 Recertification, 8-Hour Refresher, and 3-Year vs 5-Year Cycles 2.3 Suspension, Revocation, TSCA Violations, and Inspections
3 Chapter 3: Title X, 40 CFR 745, State Programs, and HUD Guidelines
3.1 Title X, TSCA 402–406, and 40 CFR 745 Architecture 3.2 Target Housing, Child-Occupied Facilities, and the 1978 Ban 3.3 EPA-Administered vs Authorized State Programs (Subpart Q) and Reciprocity 3.4 HUD Guidelines and Other Documented Methodologies
4 Chapter 4: Lead Health Effects, Blood-Lead Benchmarks, and Liability
4.1 Lead Toxicology, Child and Adult Health Effects, and Blood-Lead Benchmarks 4.2 Liability, Insurance, and Contract Risk for Abatement Supervisors
5 Chapter 5: What Counts as Abatement
5.1 Abatement vs Interim Controls vs RRP 5.2 Lead-Based Paint Definition and Component Language 5.3 Paint-Lead, Dust-Lead, and Soil-Lead Hazard Definitions
6 Chapter 6: Lead Hazard Recognition in the Field
6.1 Deteriorated Paint and Paint in Poor Condition 6.2 Friction, Impact, and Chewable Surface Hazards 6.3 High-Risk Components, Common Areas, and Dust Pathways
7 Chapter 7: Interpreting Inspection and Risk Assessment Reports
7.1 Reading Inspection Reports, XRF Results, and Paint-Chip Data 7.2 Reading Risk Assessment Reports and Selecting Control Options 7.3 Lead Hazard Screens vs Full Risk Assessments
8 Chapter 8: Occupant Protection Plans
8.1 Occupant Protection Plan Requirements 8.2 Relocation, Isolation of Work Areas, and Sensitive Occupants 8.3 Re-Occupancy Criteria, Occupant Notice, and Access Control
9 Chapter 9: Project Notification and Work Plans
9.1 Five-Business-Day Notification Contents and Electronic Filing 9.2 Updated, Canceled, EBL, and Emergency Notifications 9.3 Work Plans, Method Selection Documentation, and Pre-Abatement Walkthrough
10 Chapter 10: Interior Containment Design
10.1 Critical Barriers, Warning Signs, and Regulated Areas 10.2 Negative Air Pressure and HEPA Air-Filtration Units 10.3 Three-Stage Decontamination Units and Worker Flow
11 Chapter 11: Exterior Containment and Site Control
11.1 Exterior Ground Sheeting, Vertical Containment, and Weather Limits 11.2 Daily Exterior Cleanup, Paint-Chip Control, and Occupied/Multi-Family Logistics
12 Chapter 12: Component Replacement, Enclosure, and Encapsulation
12.1 Component Replacement 12.2 Enclosure Systems and Mechanical Fastening 12.3 Encapsulation Products, Unsuitable Surfaces, and Maintenance Schedules
13 Chapter 13: Paint Removal and Restricted Practices
13.1 Wet Scraping, Chemical Removal, and Heat Guns Below 1100°F 13.2 Restricted and Prohibited Practices 13.3 Selecting Methods, Combining Methods, and Documenting Why
14 Chapter 14: Interior Dust Abatement and Cleaning
14.1 Interior Dust Cleanup Sequence 14.2 Pre-Clearance Visual Inspection and When Cleanup Is Not Done
15 Chapter 15: Soil and Exterior Dust Abatement
15.1 Soil-Lead Hazards and Sampling Interpretation for Supervisors 15.2 Soil Removal and Replacement 15.3 Permanent Covering vs Landscaping
16 Chapter 16: OSHA 1926.62 Worker Protection
16.1 PEL, Action Level, and Exposure Assessment 16.2 Respiratory Protection, PPE, and Hygiene Facilities 16.3 Biological Monitoring and Medical Removal Protection 16.4 OSHA Competent Person Duties vs EPA Certified Supervisor Duties
17 Chapter 17: RCRA Waste Management
17.1 Abatement Waste Streams 17.2 TCLP Characterization and D008 17.3 Manifests, TSDF, Accumulation, and the Household Exclusion
18 Chapter 18: Action Levels, Post-Abatement Testing, and Records
18.1 Dust-Lead Action Levels vs Reportable-Level Hazards 18.2 Post-Abatement Visual, Dust Sampling, Independence, and the 1-Hour Wait 18.3 Failed Samples, Reclean/Retest, Exterior Visual, and Multi-Family Random Sampling 18.4 Abatement Report, 2026 Hazard Statement, Owner Copies, and 3-Year Retention
3.4 HUD Guidelines and Other Documented Methodologies
Key Takeaways Explain This Topic AI
745.227(a)(3) lists documented methodologies: HUD Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing; EPA Guidance on Residential Lead-Based Paint, Lead-Contaminated Dust, and Lead-Contaminated Soil; EPA Residential Sampling for Lead: Protocols for Dust and Soil Sampling (EPA 747-R-95-001); authorized State or Tribal methods; and other equivalent methods.
HUD Guidelines are how to implement sampling, containment, and cleaning in the field. They are not a substitute for 745.227’s mandatory work practices (notification, on-site supervisor rules, restricted practices, action levels, reports).
A supervisor reads a risk-assessment report to choose control options; sampling and testing for post-abatement dust still belong to a certified inspector or risk assessor using documented methodologies with adequate quality control.
HUD Chapter 8 (resident protection and worksite preparation) and Chapter 12 (abatement) are the usual exam sources for containment and method details — critical barriers, polyethylene, HVAC isolation, replacement/enclosure/encapsulation/paint removal — even though those chapters are guidance.
OSHA 1926.62 applies on the same site for worker protection and is not a documented methodology under 745.227(a)(3). Full OSHA is Chapter 16.
Last updated: August 2026
HUD Guidelines and Other Documented Methodologies
Quick answer: 745.227(a)(3) tells you which documented methodologies are appropriate when Subpart L says to sample, test, or select locations “according to documented methodologies.” The list is the HUD Guidelines , two EPA residential guidance/sampling documents (including EPA 747-R-95-001 ), authorized State or Tribal methods, and other equivalent methods. HUD Guidelines are not a substitute for 745.227. They are the field manual for doing what 745.227 already requires.
The exam loves two mistakes: treating HUD as optional color commentary, and treating HUD as a higher law that lets you skip notification, the 2-hour supervisor rule, or action levels. Both are wrong.
What 745.227(a) actually says
745.227(a)(1) made the work practice standards effective beginning March 1, 2000 . (a)(2) says that when a certified individual performs an activity described as an inspection, lead-hazard screen, risk assessment, or abatement, that person must comply with the appropriate requirements below . Then (a)(3) names the methodologies:
- HUD Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing
- EPA Guidance on Residential Lead-Based Paint, Lead-Contaminated Dust, and Lead-Contaminated Soil
- EPA Residential Sampling for Lead: Protocols for Dust and Soil Sampling (EPA report number 747-R-95-001)
Regulations, guidance, methods, or protocols issued by States and Indian Tribes that have been authorized by EPA
Other equivalent methods and guidelines
745.223 defines documented methodologies as methods or protocols used to sample for the presence of lead in paint, dust, and soil . That sampling focus matters. HUD Chapters on containment and abatement methods still show up because the Guidelines are a single manual: they tell a supervisor how to control the lead the sampling protocols will later measure.
Whenever 745.227 says “using documented methodologies” it is pointing at this list. Examples:
Inspection (745.227(b)): selecting components with a distinct painting history; paint analysis with adequate quality control.
Risk assessment (745.227(d)): which friction/impact/deteriorated surfaces to test; dust and soil sampling locations; quality control.
Post-abatement testing (745.227(e)(8)): dust samples taken with documented methodologies; rooms selected according to documented methodologies; minimum 1 hour after final cleanup before sampling.
Determinations (745.227(h)): comparing results to LBP, hazard, and action-level definitions — the numbers are in the CFR; the wipe, XRF, and soil protocols are in the methodologies.
Adequate quality control (745.223) means a plan that protects authenticity, integrity, and accuracy of dust, soil, and paint-chip samples, including representative sampling. A methodology that skips blanks, spike recovery, or representative locations is not “documented” just because someone photocopied a HUD chapter title onto the chain-of-custody.
HUD Guidelines vs. 745.227 — who wins
Topic 745.227 (mandatory if you are doing the activity) HUD Guidelines (documented methodology / how-to)
Who may abate Certified individuals; certified supervisor on the project Describes recommended crew skills and sequencing
Supervisor presence On-site for all prep and post-abatement cleanup; otherwise on-site or reachable and able to arrive in 2 hours Discusses supervision as good practice; cannot relax the 2-hour rule
Notification EPA or the authorized State, ≥ 5 business days (with EBL/emergency exceptions) Does not replace the notice
Occupant protection plan Unique, written, before abatement, by supervisor or project designer Chapter 8 details how to protect residents and prep the worksite
Restricted practices No open-flame burning/torching; HEPA exhaust on machines; dry-scrape and heat-gun limits Explains why those practices spread dust; still cannot authorize a torch
Dust-lead completion Below 5 / 40 / 100 µg/ft² on/after January 12, 2026 Cleaning and clearance chapters tell you how to get there
Records Reports and plans kept ≥ 3 years ; copies to the owner Sample forms; retention is still 745.227(i)
If HUD Chapter 8 describes a containment detail that helps you meet 745.227, use it. If a toolbox talk says “HUD doesn’t mention 5-day notice, so we can start tomorrow,” fire the talk. Guidance implements the rule. It does not amend the Code.
On HUD-assisted housing, 24 CFR Part 35 (Lead Safe Housing Rule) can impose additional evaluation and hazard-reduction duties. Those HUD regulatory duties are not “just Guidelines.” Do not confuse HUD Guidelines (methodology) with the Lead Safe Housing Rule (regulation for assisted housing). A public-housing abatement can be under both 40 CFR 745 Subpart L (or the authorized State) and 24 CFR 35.
Why HUD Chapter 8 and Chapter 12 appear on the exam
The HUD Guidelines are organized as a field manual. Two chapters are exam fixtures for supervisors:
Chapter 8 — Resident Protection and Worksite Preparation (containment). This is the usual source for:
- Whether occupants are relocated or remain with isolated work areas
- Warning signs at the regulated area
- Critical barriers on doors, windows, and HVAC openings
- Polyethylene floor sheeting and furniture covering or removal
- Shutting down or isolating HVAC so dust is not ducted through the building
- Exterior ground sheeting and, when needed, vertical containment
- Daily cleanup so lead dust does not leave the containment on shoes, tools, or the wind
745.223 defines containment as a process to protect workers and the environment by controlling exposures to the lead-contaminated dust and debris created during an abatement. The CFR requires containment as part of doing abatement safely; Chapter 8 is how most courses teach the plastic, tape, and barrier details.
Chapter 12 — Abatement. This is the usual source for method-level pictures of:
- Component replacement
- Enclosure (rigid, durable, mechanically fastened — matching the 745.223 enclosure definition)
- Encapsulation (and why friction, impact, chewable, or deteriorating surfaces are poor candidates)
- Paint removal (wet scraping, chemical removal, heat guns below the 1100°F federal cap)
- Integrating final cleaning so the inspector or risk assessor is not sampling visible dust
Cleaning sequences (HEPA vacuum, wet wash, HEPA again) and clearance sampling plans also live in later HUD chapters. Courses still call the package “HUD 8 and 12” because those two chapters are where containment geometry and method selection are taught. If an item asks how to sheet an exterior or whether grass counts as permanent soil covering, you are in HUD-plus-745.223 territory: permanently covered soil requires pavement or concrete, not grass or mulch.
How a supervisor uses methodologies on a real job
Reading the risk assessment. A certified risk assessor (not the supervisor, unless the supervisor also holds that discipline) identifies hazards and recommends interim controls and/or abatement options, with a suggested priority, and a maintenance schedule if encapsulant or enclosure is recommended ( 745.227(d)(11) ). The supervisor’s job is to turn that report into a work plan and occupant protection plan that 745.227(e) will survive:
- Which components are LBP vs. below the definition
- Which hazards are paint, dust, or soil
Which recommended option is actually abatement (permanent) versus interim control (temporary) — interim controls are not abatement ( 745.223 )
Whether soil is a play-area 400 ppm problem or rest-of-yard 1,200 ppm problem ( 745.227(h)(4) )
If the risk assessor sampled dust with HUD/EPA wipe protocols and reported floors at a reportable level, that is already a dust-lead hazard on/after January 12, 2026. Abatement of that dust still has to finish below the 5/40/100 action levels . Do not read “hazard = any reportable level” as “we can never complete abatement.” Completion is the action-level test; the hazard statement covers leftover reportable dust below those levels (Chapter 18).
Choosing sampling and cleaning. The supervisor designs cleaning so the inspector or risk assessor can sample. 745.227(e)(8) and (f) are strict: post-abatement dust sampling is performed only by a certified inspector or risk assessor; samples go to an EPA-recognized laboratory (TSCA 405(b)); dust samples wait at least 1 hour after final cleanup; rooms are selected according to documented methodologies. You do not “HUD-wipe” your own clearance to save a fee unless you also hold the inspector/risk assessor certification and the firm arrangement is independent enough to be honest. Fail a sample and you reclean and retest the components it represents — another 745.227 rule HUD cleaning chapters merely illustrate.
Authorized-state methods. 745.227(a)(3) expressly allows methodologies issued by EPA-authorized States and Tribes. In an authorized State, the State sampling SOP may be the documented methodology you must use. It still cannot undercut the State’s own work-practice standards, which had to be at least as protective as Subpart L.
OSHA 1926.62 is a parallel duty, not a methodology
OSHA 1926.62 is not on the 745.227(a)(3) list. It does not tell you how to take a floor wipe for EPA action levels. It does tell you that employees on the abatement have a 50 µg/m³ PEL, a 30 µg/m³ action level, exposure assessment, respirators, hygiene facilities, and medical surveillance. A containment that satisfies HUD Chapter 8 can also help keep OSHA exposures down, but passing OSHA air monitoring does not clear EPA dust-lead action levels, and passing clearance wipes does not satisfy OSHA. Preview only; Chapter 16 is the full worker-protection syllabus.
Field rule
When the exam or the job asks “what methodology,” name a 745.227(a)(3) source and then apply the mandatory 745.227 paragraph that triggered the sampling or work practice. HUD Chapter 8 for how to contain. HUD Chapter 12 for how to abate a component. 745.227 for whether you were allowed to start, who had to be on site, and whether you are done.