Study guide

5.2 Tests of Controls, Walkthroughs & Evaluating Deficiencies (ISA 265)

EPSO Auditors Open Competition AD7, Field of Audit

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Competition Structure & Reasoning Tests

1.1 Competition Format, Eligibility & Selection Rules 1.2 Verbal Reasoning: Text Analysis & Deductive Logic 1.3 Numerical Reasoning: Ratios, Percentages & Data Interpretation 1.4 Abstract Reasoning: Pattern Recognition & Matrix Sequences

2 Chapter 2: Auditing Frameworks, Standards & Professional Ethics

2.1 International Standards on Auditing (ISA) & IAASB Framework 2.2 Public Sector Auditing: INTOSAI & ISSAI Architecture 2.3 The IIA Global Internal Audit Standards (IPPF) 2.4 Professional Ethics, Independence & Professional Skepticism

3 Chapter 3: Audit Risk Assessment & Materiality

3.1 Strategic & Annual Audit Planning 3.2 Understanding the Entity, Environment & Inherent Risk (ISA 315) 3.3 The Audit Risk Model: Inherent, Control & Detection Risk 3.4 Materiality, Performance Materiality & Tolerable Misstatement (ISA 320)

4 Chapter 4: Audit Evidence, Procedures & Sampling

4.1 Sufficient Appropriate Audit Evidence & Financial Assertions (ISA 500) 4.2 Substantive Testing & Substantive Analytical Procedures (ISA 520) 4.3 Audit Sampling: Statistical, Monetary Unit Sampling & Sampling Risk (ISA 530) 4.4 Audit Documentation, Working Papers & Audit Trails (ISA 230)

5 Chapter 5: Internal Control Systems & IT Audit

5.1 COSO Framework: The Five Components & Seventeen Principles 5.2 Tests of Controls, Walkthroughs & Evaluating Deficiencies (ISA 265) 5.3 IT General Controls (ITGC) & Automated Application Controls 5.4 CAATs, Data Analytics & Continuous Auditing 5.5 Audit Methodology, Tools & Knowledge Management

6 Chapter 6: Performance Auditing & The Three Es

6.1 Principles & Mandates of Performance Auditing (ISSAI 300/3000) 6.2 The Three Es: Economy, Efficiency & Effectiveness 6.3 Audit Findings (Condition, Criteria, Cause, Effect) & SMART Recommendations 6.4 Following Up Findings & Recommendations 6.5 Leading & Coordinating Audit Assignments

7 Chapter 7: Fraud Risk, Compliance & Investigative Bodies

7.1 Fraud Risk Assessment, Fraud Triangle & ISA 240 7.2 Compliance Auditing: Legality, Regularity & ISSAI 400/4000 7.3 EU Anti-Fraud Architecture: OLAF, EPPO & Irregularity Reporting

8 Chapter 8: Audit Reporting & Opinions

8.1 Audit Opinions: Unmodified, Qualified, Adverse & Disclaimer (ISA 700/705) 8.2 Key Audit Matters (KAM), Emphasis of Matter & Other Matter Paragraphs 8.3 ECA Annual Reports, DAS & Special Reports 8.4 Quality Assurance & Peer Review

9 Chapter 9: EU Financial Governance & Budget Architecture

9.1 The EU Budget, Multiannual Financial Framework & Own Resources 9.2 The EU Financial Regulation: Budgetary & Financial Principles 9.3 Budget Implementation Modes: Direct, Shared & Indirect Management 9.4 The Annual Discharge Procedure & Parliamentary Oversight (CONT)

10 Chapter 10: EU Written Test (EUFTE) & Reserve List Strategy

10.1 EUFTE: Official Format & Written-Communication Anchors 10.2 Source-Based Drafting Under Time Pressure 10.3 Reserve List & Institution-Led Recruitment

5.2 Tests of Controls, Walkthroughs & Evaluating Deficiencies (ISA 265)

Key Takeaways Explain This Topic AI

Auditors must distinguish between evaluating control Design and Implementation (D&I) and testing Operating Effectiveness (OE); D&I confirmation does not establish operating effectiveness.

A walkthrough test traces a single transaction from initial origination through every processing and accounting step to final financial reporting, identifying points where misstatements could occur.

Tests of controls employ four standard procedures—inquiry, observation, inspection, and reperformance—with inquiry alone being legally and methodologically insufficient to support control reliance.

ISA 265 and ISSAI 2265 establish a clear hierarchy of deficiencies, requiring significant deficiencies to be communicated in writing to Those Charged With Governance (TCWG).

Segregation of duties under the CARR framework (Custody, Authorization, Recording, Reconciliation) is codified in the EU Financial Regulation via the strict separation of Authorising Officers and Accounting Officers.

Last updated: October 2026

5.2 Tests of Controls, Walkthroughs & Evaluating Deficiencies (ISA 265)

Core Principle: An auditor cannot rely on internal controls to reduce substantive testing merely because a control policy exists in an administrative manual. Under International Standard on Auditing (ISA) 315 and ISA 330, the auditor must first evaluate the design and verify the implementation (D&I) of controls. Only if a control is properly designed and implemented may the auditor proceed to test its operating effectiveness (OE) throughout the period of reliance.

1. Design & Implementation (D&I) vs. Operating Effectiveness (OE)

In both commercial audits under ISAs and public sector audits under the ISSAI framework (such as ISSAI 2315 and ISSAI 2330 applied by the European Court of Auditors), testing internal controls is executed in two distinct, sequential phases:

Phase 1: Evaluating Design and Implementation (D&I)

Design Evaluation: The auditor evaluates whether the control, individually or in combination with other controls, is capable of effectively preventing, or detecting and correcting, material misstatements at the assertion level. A poorly designed control cannot prevent errors, regardless of how diligently staff execute it.

Implementation Evaluation: The auditor verifies that the control actually exists and that the entity is actively utilizing it in practice at a specific point in time.

Golden Rule: Evaluating D&I does not provide audit evidence regarding the operating effectiveness of the control over time (except for automated application controls where verified IT general controls ensure unchanged software operation).

Phase 2: Testing Operating Effectiveness (OE)

If the auditor plans to assess control risk as low and rely on the control to restrict the scope of substantive testing, the auditor must test operating effectiveness under ISA 330. Testing OE evaluates:

How the control was applied at relevant times throughout the audit period.

The consistency with which it was applied.

By whom or by what means it was applied.

  • The rate of deviation from the prescribed control procedure. CONTROL TESTING METHODOLOGY
  • +-----------------------------------------------------------------------------+
  • | 1. EVALUATE CONTROL DESIGN |
  • | Is the control theoretically capable of preventing or detecting error? |
  • | --> NO: Record design deficiency; do not test further; perform 100% |
  • | substantive testing. |
  • | --> YES: Proceed to implementation check. |
  • +-----------------------------------------------------------------------------+
  • |
  • v
  • +-----------------------------------------------------------------------------+
  • | 2. VERIFY IMPLEMENTATION |
  • | Does the control actually exist and is it in active operational use? |
  • | (Walkthrough test of one transaction). |
  • | --> NO: Record implementation deficiency; do not rely on control. |
  • | --> YES: Proceed to operating effectiveness testing (if relying). |
  • +-----------------------------------------------------------------------------+
  • |
  • v
  • +-----------------------------------------------------------------------------+
  • | 3. TEST OPERATING EFFECTIVENESS (OE) |
  • | Did the control operate consistently throughout the entire audit period? |
  • | (Sample testing across the year: inspection, observation, reperformance).|
  • | --> Deviations found: Reassess control risk to HIGH; expand substantive |
  • | testing of details. |
  • | --> Effective: Reduce substantive testing; rely on controls. |
  • +-----------------------------------------------------------------------------+
  • 2. Walkthrough Tests: Mechanics and Audit Objectives

A walkthrough test is an often useful audit procedure during the risk assessment and D&I evaluation phases. In a walkthrough, the auditor traces a single transaction from its initial origination at the operational level, through every manual and automated processing stage, through authorization and accounting recording, until it is finally reflected in the financial statements.

Core Objectives of a Walkthrough

Confirm System Understanding: Validates the accuracy of system flowcharts and narrative descriptions documented by the auditor during interviews.

Identify "What Could Go Wrong" (WCGW): Pinpoints the exact operational junctures where transactions could be lost, altered, improperly calculated, or recorded without authorization.

Assess Control Design: Evaluates whether controls positioned at identified risk points are appropriately designed to mitigate risks.

Verify Implementation: Confirms that controls have been put into operation and are not merely theoretical directives in organizational policies.

Execution Technique

A walkthrough requires the auditor to sit with operational personnel, observe them perform their daily routine on live computer terminals, examine the documents generated, and inspect the electronic sign-offs. Simply asking a manager how the system is supposed to work does not constitute a valid walkthrough.

3. The Four Test of Controls Procedures

When testing the operating effectiveness of controls under ISA 330 and ISSAI 2330, auditors draw upon four classic audit procedures, which vary significantly in their evidentiary persuasiveness:

Procedure Nature and Scope Evidentiary Persuasiveness Critical Audit Limitation

Inquiry Seeking oral or written information from knowledgeable personnel across the entity. Lowest Inquiry alone is NEVER sufficient. Must always be corroborated with another procedure.

Observation Watching personnel execute a control process or procedure in real time. Moderate Limited strictly to the point in time when the observation takes place. Staff may perform flawlessly while observed.

Inspection Examining physical or electronic records, approval signatures, reconciliations, and exception logs. High Verifies that a sign-off or document exists, but does not definitively prove the reviewer rigorously examined the data.

Reperformance Independent execution by the auditor of procedures or controls originally performed by the entity. Highest Demonstrates that the control produces the exact expected result when executed independently. Most time-consuming.

Important Exam Rule: To test operating effectiveness, inquiry must always be combined with inspection, observation, or reperformance. An audit file containing only inquiries of management to support control reliance represents a severe audit failure under ISA 330.

4. Evaluating Control Deficiencies under ISA 265 / ISSAI 2265

When auditors identify weaknesses during control evaluations or substantive testing, they must evaluate their severity and report them in accordance with ISA 265 ( Communicating Deficiencies in Internal Control to Those Charged with Governance and Management ) and ISSAI 2265 .

The Deficiency Severity Hierarchy

Deficiency in Internal Control:

Exists when a control is designed, implemented, or operated in such a way that it cannot prevent, or detect and correct, misstatements in the financial statements on a timely basis; OR

A control necessary to prevent, or detect and correct, misstatements is missing entirely.

Significant Deficiency:

A deficiency or combination of deficiencies in internal control that, in the auditor's professional judgment, is of sufficient importance to merit the attention of Those Charged With Governance (TCWG) .

Material Weakness:

A term utilized in international practice and US standards (PCAOB Auditing Standard 2201), representing a deficiency or combination of deficiencies such that there is a reasonable possibility that a material misstatement of the financial statements will not be prevented, or detected and corrected, on a timely basis. In ISA 265 terminology, material weaknesses fall within the upper severity bracket of significant deficiencies.

Indicators of Significant Deficiencies

ISA 265 identifies explicit red flags that indicate the presence of a significant deficiency:

Evidence of an ineffective Control Environment (e.g. management lack of integrity, absence of ethical oversight).

Absence of a formalized risk assessment process within an entity exposed to volatile operational environments.

Evidence of management override of controls or management fraud.

Ineffective response to identified significant risks (e.g. failure to implement controls over high-risk grant payments).

Correction of a material misstatement in the current period financial statements that was not initially detected by internal controls.

Prior period restatements resulting from failure to detect errors.

5. Mandatory Communication Requirements (ISA 265)

ISA 265 establishes rigid, legally binding communication protocols regarding internal control deficiencies:

Written Communication to Those Charged with Governance (TCWG)

The auditor shall communicate in writing significant deficiencies in internal control identified during the audit to Those Charged With Governance on a timely basis.

In EU institutions, TCWG corresponds to the Audit Progress Committee (APC) , the College of Commissioners , and ultimately the European Parliament's Committee on Budgetary Control (CONT) in the context of the annual discharge procedure.

Communication to Management

The auditor shall communicate in writing to management at an appropriate level of responsibility:

Significant deficiencies in internal control (unless it would be inappropriate to communicate directly with management, such as when management integrity is in question).

Other deficiencies in internal control identified during the audit that have not been communicated to management by other parties and that, in the auditor's professional judgment, are of sufficient importance to merit management's attention (may be communicated orally or in writing).

Required Contents of Written Communication

The written communication of significant deficiencies must include:

A clear description of the deficiencies and an explanation of their potential consequences.

Sufficient contextual explanation to enable TCWG and management to understand that:

The purpose of the audit was to express an opinion on the financial statements.

The audit included consideration of internal control only to design appropriate audit procedures, not to express an opinion on internal control effectiveness.

The matters reported are limited to those deficiencies identified during the audit that the auditor concluded were of sufficient importance to report to TCWG.

6. Segregation of Duties: The CARR Framework & EU Financial Regulation

Segregation of duties (SoD) is the primary structural safeguard preventing fraud and error. Under the classic CARR framework , four incompatible organizational functions must be assigned to different individuals:

C - Custody of Assets: Physical or electronic access to cash, bank accounts, inventory, or digital payment tokens.

A - Authorization: Approving transactions, entering into legal commitments, signing purchase orders, or executing contracts.

R - Recording (Accounting): Preparing journal entries, posting vouchers, maintaining general ledgers, and preparing financial statements.

R - Reconciliation: Reconciling bank accounts, matching purchase orders to invoices, comparing inventory counts to book records, and conducting independent verification. THE CARR FRAMEWORK

  • +-------------------------------------------------------+
  • | CARR FUNCTIONS |
  • +-------------------------------------------------------+
  • | [C] Custody: Physical/electronic control of funds |
  • | [A] Authorization: Approving contracts & commitments |
  • | [R] Recording: Journal entries & general ledger |
  • | [R] Reconciliation: Independent verification |
  • +-------------------------------------------------------+
  • |
  • Must be segregated across independent administrative actors
  • |
  • v
  • EU FINANCIAL REGULATION CODIFICATION
  • +-------------------------------------------------------+
  • | AUTHORISING OFFICER (AOD) | ACCOUNTING OFFICER |
  • | - Budgetary commitments | - Payment execution |
  • | - Legal contracts | - Treasury & cash |
  • | - Validating expenditure | - Keeping the books |
  • | - Issuing recovery orders | - Accounting systems |
  • +-------------------------------------------------------+
  • STRICT INCOMPATIBILITY
  • Separation in the EU Financial Regulation

The CARR label is a teaching mnemonic, not a statutory term. The current Financial Regulation, Regulation (EU, Euratom) 2024/2509 , separates authorising and accounting duties and makes them mutually incompatible. Authorising officers manage revenue and expenditure operations within delegated powers; accounting officers execute payments and collection, keep accounts, manage treasury and validate accounting systems under the Regulation.

An audit should map the actual legal delegation and workflow. Segregation reduces the opportunity for one person to initiate, approve, record and execute a transaction, but small teams may need controlled compensating review rather than an impossible ideal structure.

Loading diagram... ISA 265 Internal Control Deficiency Classification and Communication