Study guide

3.6 Securite Safety Messages & Navigational Warnings

RYA Marine Radio Short Range Certificate SRC/VHF

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: GMDSS Framework & Safety Equipment

1.1 GMDSS Architecture & Sea Areas (A1, A2, A3, A4) 1.2 Satellite EPIRBs (406 MHz / 121.5 MHz & COSPAS-SARSAT) 1.3 Search and Rescue Transponders (SART) & AIS-SART 1.4 NAVTEX System & Maritime Safety Information (MSI) 1.5 Digital Selective Calling (DSC) Fundamentals & MMSI Numbers

2 Chapter 2: VHF Radio Technical Operation & Channel Plan

2.1 Marine VHF Radio Controls, Power (1W vs 25W), & Squelch 2.2 VHF Range Calculations, Antenna Height, & Line-of-Sight Propagation 2.3 Simplex vs. Duplex Operating Modes & Channel Architecture 2.4 Specific VHF Channel Allocations (Ch 16, 70, 06, 13, 67, 80) 2.5 Routine DSC Calls & Working Channel Selection

3 Chapter 3: Emergency Communications & Distress Protocols

3.1 Voice Mayday Call & Distress Message Structure 3.2 DSC Distress Alerts & Automatic Acknowledgement Rules 3.3 Cancellation of False DSC Alerts & Accidental Transmissions 3.4 Mayday Relay Protocols & Coast Guard Coordination 3.5 Pan-Pan Urgency Calls & Medical Transmissions (Pan-Pan Medico) 3.6 Securite Safety Messages & Navigational Warnings 3.7 Radio Silence Control (Seelonce Mayday, Seelonce Distress, Prudonce, Seelonce Feenee)

4 Chapter 4: UK Regulations, Ofcom Licensing & Radio Governance

4.1 Ofcom Ship Radio Licensing & Ship Portable Licenses (10-Year Validation) 4.2 RYA Personal Operator Certificate (SRC) & Master's Authority 4.3 Secrecy of Communications, Illegal Transmissions, & Hoax Penalties 4.4 Radio Logbooks, Watchkeeping Requirements, & Routine Maintenance

5 Chapter 5: Phonetics, Terminology & Standard Marine Vocabulary

5.1 ITU Phonetic Alphabet (Alfa to Zulu) & Pronunciation Standards 5.2 Maritime Phonetic Numbering System & Position Reporting Formats 5.3 Standard Marine Procedural Words (Prowords: Over, Out, Roger, Say Again, Read Back)

3.6 Securite Safety Messages & Navigational Warnings

Key Takeaways Explain This Topic AI

The safety signal SECURITE (pronounced say-cure-ee-tay) is used to transmit messages concerning important navigational hazards or meteorological warnings.

Safety communications hold third priority in maritime radio traffic, below Distress (Mayday) and Urgency (Pan-Pan), but above routine calls.

Securite broadcasts follow a strict two-stage process: an announcement on Channel 16 (or DSC Ch 70), followed by the main text on a working channel.

Vessels observing a new navigational hazard (e.g., drifting container, unlit buoy, wreckage) are legally obligated under SOLAS to report it via Securite.

Meteorological warnings transmitted under Securite include Gale Warnings (Force 8 and above) and sudden severe weather hazards.

Last updated: July 2026

3.6 Securite Safety Messages & Navigational Warnings

The Safety Priority signal is the spoken word SECURITE (pronounced say-cure-ee-tay , derived from the French word for safety). In maritime radio operations, Securite messages convey essential navigational warnings, storm alerts, and safety-critical information to mariners.

Purpose & Triggers for Securite Messages

Under SOLAS Chapter V (Safety of Navigation) and ITU Radio Regulations, ship masters have a legal duty to broadcast safety messages whenever they observe significant hazards to navigation.

Primary Securite Categories:

Meteorological Hazards: Gale warnings (Beaufort Wind Force 8 or higher), storm warnings, tropical cyclones, or sudden extreme weather shifts.

Navigational Hazards: Semi-submerged shipping containers, drifting timber/logs, abandoned vessel derelicts, or icebergs.

Aids to Navigation Failures: Unlit lightships, missing channel buoys, off-station navigational marks, or defective lighthouses.

Military Operations: Live-firing naval target practice, submarine exercises, or temporary exclusion zones in coastal waters.

The Mandatory Two-Stage Broadcast Procedure

To prevent clogging VHF Channel 16 with lengthy broadcasts, safety messages must follow a strict two-stage protocol . +------------------------------------------------------------------+

  • | SECURITE TWO-STAGE PROCEDURE |
  • +------------------------------------------------------------------+
  • | STAGE 1: ANNOUNCEMENT ON VHF CH 16 (or DSC CH 70) |
  • | - Broadcast SECURITE (x3) + ALL STATIONS (x3) + THIS IS... |
  • | - Direct listening stations to switch to a WORKING CHANNEL |
  • | |
  • | STAGE 2: MAIN TEXT ON DESIGNATED WORKING CHANNEL (e.g. CH 67) |
  • | - Switch radio to working channel |
  • | - Broadcast SECURITE (x3) + Full Navigational Warning Details |
  • | - Terminate with OUT |
  • +------------------------------------------------------------------+

CRITICAL EXAM RULE: NEVER broadcast the main body of a Securite message on Channel 16. Channel 16 is used ONLY for the brief initial announcement directing vessels to a working channel.

  • Verbatim Voice Scripts
  • Stage 1: Announcement Broadcast on VHF Channel 16 SECURITE SECURITE SECURITE
  • ALL STATIONS ALL STATIONS ALL STATIONS
  • THIS IS
  • SOLENT COASTGUARD SOLENT COASTGUARD SOLENT COASTGUARD
  • FOR IMPORTANT NAVIGATIONAL WARNING LISTEN ON VHF CHANNEL SIX SEVEN
  • OUT
  • Stage 2: Main Message Broadcast on VHF Channel 67 (Working Channel) SECURITE SECURITE SECURITE
  • ALL STATIONS ALL STATIONS ALL STATIONS
  • THIS IS SOLENT COASTGUARD
  • NAVIGATIONAL WARNING ISSUED AT ONE ZERO ZERO ZERO UTC
  • DRIFTING STEEL CONTAINER REPORTED IN POSITION TWO NAUTICAL MILES SOUTH OF BEMBRIDGE LEDGE BUOY
  • PARTIALLY SUBMERGED HAZARD TO NAVIGATION
  • ALL VESSELS IN AREA EXERCISE CAUTION
  • OUT
  • Priority Comparison Summary
  • Priority Level Signal Word Primary Purpose Primary VHF Channels Used
  • 1. Distress MAYDAY Grave & Imminent Danger to Life/Vessel Ch 16 (Voice) & Ch 70 (DSC)
  • 2. Urgency PAN PAN Urgent Safety Concern (No Imminent Risk) Ch 16 -> Working Channel
  • 3. Safety SECURITE Navigational Hazards & Gale Warnings Ch 16 (Announcement) -> Working Channel (Main Text)
  • 4. Routine None Inter-vessel & Port Operations Working Channels (Ch 06, 08, 72, 80, etc.)
  • Definition & Purpose of Securite Safety Traffic

In maritime radio operations, a Safety message is announced by the proword SECURITE (pronounced SAY-CUR-EE-TAY , from the French word for safety). Securite has third priority in radio communications, ranking below Mayday (Distress) and Pan-Pan (Urgency), but taking absolute precedence over routine commercial and personal calls.

Securite transmissions are used to transmit important navigational safety warnings , meteorological hazard reports , and hydrographic notices to all mariners operating within range.

Triggers for Initiating a Securite Transmission

Under SOLAS Chapter V (Safety of Navigation), vessel masters have a statutory obligation to report navigational hazards immediately. Securite calls must be broadcast when observing:

Severe Weather Warnings : Unexpected gale-force or storm-force winds (Gale Warnings), tropical storms, or sudden sea fog.

Floating Navigational Hazards : Drifting ISO shipping containers, semi-submerged timber, unlit derelict vessels, or heavy icebergs.

Damaged Aids to Navigation : Extinguished lighthouses, misplaced fairway buoys, damaged cardinal marks, or inactive RACON beacons.

Navigational Events : Military firing exercises, major regattas, seismic survey operations, or underwater cable-laying operations.

Two-Stage Broadcast Procedure for Securite

To avoid cluttering VHF Channel 16—which must remain open for distress monitoring—Securite messages follow a mandatory two-stage broadcast procedure :

Stage 1 (Announcement on Channel 16 / DSC Channel 70) : An initial safety call announcement is transmitted on Channel 16 (or via a Safety DSC call on Channel 70) directing stations to switch to a working channel.

Stage 2 (Message Content on Working Channel) : The vessel or coast station immediately switches to an assigned inter-ship or coastguard working channel (such as VHF Channel 67, 11, or 72) to broadcast the full hazard text. [Stage 1 - Transmitted on VHF Channel 16]

  • "SECURITE, SECURITE, SECURITE"
  • "ALL STATIONS, ALL STATIONS, ALL STATIONS"
  • "THIS IS MOTOR YACHT CORSAIR, CORSAIR, CORSAIR"
  • "FOR IMPORTANT NAVIGATIONAL WARNING SWITCH TO VHF CHANNEL 67"
  • "OUT"
  • [Stage 2 - Transmitted on VHF Channel 67]
  • "SECURITE, SECURITE, SECURITE"
  • "ALL STATIONS, ALL STATIONS, ALL STATIONS"
  • "THIS IS MOTOR YACHT CORSAIR, CORSAIR, CORSAIR"

"OBSERVED UNLIT DERELICT FISHING VESSEL DRIFTING IN POSITION 50 DEGREES 30 MINUTES NORTH, 001 DEGREE 10 MINUTES WEST"

  • "HAZARD TO NAVIGATION"
  • "MASTER, MOTOR YACHT CORSAIR"
  • "OUT"

In RYA SRC assessments, candidates must demonstrate the two-stage protocol without broadcasting the full text on Channel 16.

Loading diagram... Securite Two-Stage Broadcast Procedure