Study guide
1.4 NAVTEX System & Maritime Safety Information (MSI)
RYA Marine Radio Short Range Certificate SRC/VHF
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: GMDSS Framework & Safety Equipment
1.1 GMDSS Architecture & Sea Areas (A1, A2, A3, A4) 1.2 Satellite EPIRBs (406 MHz / 121.5 MHz & COSPAS-SARSAT) 1.3 Search and Rescue Transponders (SART) & AIS-SART 1.4 NAVTEX System & Maritime Safety Information (MSI) 1.5 Digital Selective Calling (DSC) Fundamentals & MMSI Numbers
2 Chapter 2: VHF Radio Technical Operation & Channel Plan
2.1 Marine VHF Radio Controls, Power (1W vs 25W), & Squelch 2.2 VHF Range Calculations, Antenna Height, & Line-of-Sight Propagation 2.3 Simplex vs. Duplex Operating Modes & Channel Architecture 2.4 Specific VHF Channel Allocations (Ch 16, 70, 06, 13, 67, 80) 2.5 Routine DSC Calls & Working Channel Selection
3 Chapter 3: Emergency Communications & Distress Protocols
3.1 Voice Mayday Call & Distress Message Structure 3.2 DSC Distress Alerts & Automatic Acknowledgement Rules 3.3 Cancellation of False DSC Alerts & Accidental Transmissions 3.4 Mayday Relay Protocols & Coast Guard Coordination 3.5 Pan-Pan Urgency Calls & Medical Transmissions (Pan-Pan Medico) 3.6 Securite Safety Messages & Navigational Warnings 3.7 Radio Silence Control (Seelonce Mayday, Seelonce Distress, Prudonce, Seelonce Feenee)
4 Chapter 4: UK Regulations, Ofcom Licensing & Radio Governance
4.1 Ofcom Ship Radio Licensing & Ship Portable Licenses (10-Year Validation) 4.2 RYA Personal Operator Certificate (SRC) & Master's Authority 4.3 Secrecy of Communications, Illegal Transmissions, & Hoax Penalties 4.4 Radio Logbooks, Watchkeeping Requirements, & Routine Maintenance
5 Chapter 5: Phonetics, Terminology & Standard Marine Vocabulary
5.1 ITU Phonetic Alphabet (Alfa to Zulu) & Pronunciation Standards 5.2 Maritime Phonetic Numbering System & Position Reporting Formats 5.3 Standard Marine Procedural Words (Prowords: Over, Out, Roger, Say Again, Read Back)
1.4 NAVTEX System & Maritime Safety Information (MSI)
Key Takeaways Explain This Topic AI
NAVTEX is an automated direct-printing service broadcasting Maritime Safety Information (MSI) on 518 kHz (International, English) and 490 kHz (National).
Transmissions use time-sharing schedules with single transmitter ID letters (B1) to prevent co-channel radio interference between coastal stations.
NAVTEX message headers follow the standardized format ZCZC B1 B2 B3 B4, where B1 is station ID, B2 is subject type, and B3 B4 is serial number.
Essential message subjects—Navigational Warnings (A), Meteorological Warnings (B), and SAR Alerts (D)—cannot be inhibited by the operator.
A serial number of '00' designates a vital distress broadcast, forcing printing and triggering an audible alarm regardless of receiver settings.
Last updated: July 2026
1.4 NAVTEX System & Maritime Safety Information (MSI)
Quick Answer: NAVTEX (Navigational Telex) is an automated, medium-frequency (MF) direct-printing service designed to distribute Maritime Safety Information (MSI) —including navigational warnings, meteorological forecasts, gale warnings, and search and rescue (SAR) alerts—to vessels at sea. Operating primarily on 518 kHz (International English) and 490 kHz (National languages), NAVTEX provides reliable ground-wave coverage extending 200 to 400 nautical miles from coastal transmitting stations.
The Maritime Safety Information (MSI) Infrastructure
Maritime Safety Information is globally coordinated under the World-Wide Navigational Warning Service (WWNWS) jointly established by the International Maritime Organization (IMO) and the International Hydrographic Organization (IHO). The world's oceans are divided into 21 geographical areas called NAVAREAs / METAREAs (e.g., the United Kingdom falls under NAVAREA I).
Within GMDSS, MSI is delivered to mariners via two main carrier systems:
NAVTEX: Used for coastal waters up to ~400 nautical miles from land.
SafetyNET / Enhanced Group Calling (EGC): Broadcast via Inmarsat satellites for open ocean regions (Sea Area A3).
NAVTEX Frequencies & Technical Characteristics
NAVTEX receivers operate on three standardized radio frequencies, using Narrow-Band Direct-Printing (NBDP) telegraphy with Frequency Shift Keying (FSK) modulation:
- Frequency Operating Role Language & Accessibility Target Coverage
- 518 kHz International NAVTEX English ONLY (Mandatory GMDSS frequency) Coastal waters (200 – 400 nm)
- 490 kHz National NAVTEX Local language (e.g., French, Spanish, UK local met) Coastal waters (200 – 400 nm)
- 4209.5 kHz HF NAVTEX English / National languages Tropical / High-latitude polar regions
- Time-Sharing Schedules & Station Identification (B1)
To prevent multiple coastal radio stations within the same NAVAREA from broadcasting simultaneously on 518 kHz and causing destructive radio interference, stations share the frequency using strict time-sharing transmitter schedules .
Each NAVAREA groups up to 24 coastal stations, assigning each a unique single-letter Transmitter Identifier (B1) from A through Z .
Stations are organized into transmitter groups of 6 stations each.
Each station is allocated a 10-minute transmission slot once every 4 hours (6 broadcasts per 24-hour day). Transmitter Slot Grouping Example (NAVAREA I):
- Slot 1 (0000 UTC): Station A (e.g., Cross Corsen)
- Slot 2 (0010 UTC): Station B (e.g., Niton / UK)
- Slot 3 (0020 UTC): Station C (e.g., Cullercoats / UK)
- Slot 4 (0030 UTC): Station D (e.g., Portpatrick / UK)
...repeats on a rigid 4-hour rotation sequence.
NAVTEX Header Protocol Syntax: ZCZC B1 B2 B3 B4
Every NAVTEX broadcast begins with a standardized preamble header that allows digital receivers to decode, filter, and print or reject messages automatically. Header Format: Z C Z C B 1 B 2 B 3 B 4 \text{Header Format: } \mathbf{ZCZC} \quad \mathbf{B_1} \quad \mathbf{B_2} \quad \mathbf{B_3 B_4} Header Format: ZCZC B 1 B 2 B 3 B 4
Preamble Elements Breakdown:
ZCZC : Start-of-message preamble marker. Triggers receiver synchronization.
B1 (Transmitter Identification Character): A single letter (A–Z) identifying the originating coast station.
B2 (Subject Indicator Character): A single letter (A–Z) defining the category of information contained in the message.
B3 B4 (Message Serial Number): A two-digit numerical sequence ( 01 through 99 ) tracking specific messages.
Following the header preamble, the main body text is transmitted in plain language, terminating with the four-letter end-of-message code NNNN .
Subject Indicator Characters (B2) & Receiver Filtering
Radio operators can program shipboard NAVTEX receivers to reject unwanted stations (B1) or irrelevant subject categories (B2). However, to guarantee maritime safety, international regulations mandate that four critical subject types CANNOT be inhibited or turned off .
- B2 Code Subject Category Inhibitable Status Operational Priority
- A Navigational Warnings NON-INHIBITABLE (Mandatory) High
- B Meteorological Warnings (Gale/Storm) NON-INHIBITABLE (Mandatory) High
- C Ice Reports Inhibitable (Optional) Routine
- D Search & Rescue (SAR) Info / Piracy NON-INHIBITABLE (Mandatory) VITAL / Emergency
- E Meteorological Forecasts Inhibitable (Optional) Routine
- F Pilot Service Messages Inhibitable (Optional) Routine
- L Additional Navigational Warnings NON-INHIBITABLE (Mandatory) High
- V Special Services (Electronic Nav Warnings) Inhibitable (Optional) Routine
- The Special Role of Serial Number '00' ( B3 B4 = 00 )
Normal serial numbers range from 01 to 99. When a message has been received without errors, the NAVTEX unit stores B1B2B3B4 in memory to prevent printing duplicate copies during subsequent 4-hour broadcast cycles.
However, B3 B4 = 00 is reserved strictly for Vital Emergency / Distress Messages (such as an active distress call relay or immediate hazard notification). When a header containing B3 B4 = 00 arrives:
The receiver forces immediate printing/display .
It overrides all operator filter settings , regardless of B1 or B2 selections.
It triggers an audible emergency alarm on the bridge unit to wake watchkeepers.