Study guide
5.2 Maritime Phonetic Numbering System & Position Reporting Formats
RYA Marine Radio Short Range Certificate SRC/VHF
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: GMDSS Framework & Safety Equipment
1.1 GMDSS Architecture & Sea Areas (A1, A2, A3, A4) 1.2 Satellite EPIRBs (406 MHz / 121.5 MHz & COSPAS-SARSAT) 1.3 Search and Rescue Transponders (SART) & AIS-SART 1.4 NAVTEX System & Maritime Safety Information (MSI) 1.5 Digital Selective Calling (DSC) Fundamentals & MMSI Numbers
2 Chapter 2: VHF Radio Technical Operation & Channel Plan
2.1 Marine VHF Radio Controls, Power (1W vs 25W), & Squelch 2.2 VHF Range Calculations, Antenna Height, & Line-of-Sight Propagation 2.3 Simplex vs. Duplex Operating Modes & Channel Architecture 2.4 Specific VHF Channel Allocations (Ch 16, 70, 06, 13, 67, 80) 2.5 Routine DSC Calls & Working Channel Selection
3 Chapter 3: Emergency Communications & Distress Protocols
3.1 Voice Mayday Call & Distress Message Structure 3.2 DSC Distress Alerts & Automatic Acknowledgement Rules 3.3 Cancellation of False DSC Alerts & Accidental Transmissions 3.4 Mayday Relay Protocols & Coast Guard Coordination 3.5 Pan-Pan Urgency Calls & Medical Transmissions (Pan-Pan Medico) 3.6 Securite Safety Messages & Navigational Warnings 3.7 Radio Silence Control (Seelonce Mayday, Seelonce Distress, Prudonce, Seelonce Feenee)
4 Chapter 4: UK Regulations, Ofcom Licensing & Radio Governance
4.1 Ofcom Ship Radio Licensing & Ship Portable Licenses (10-Year Validation) 4.2 RYA Personal Operator Certificate (SRC) & Master's Authority 4.3 Secrecy of Communications, Illegal Transmissions, & Hoax Penalties 4.4 Radio Logbooks, Watchkeeping Requirements, & Routine Maintenance
5 Chapter 5: Phonetics, Terminology & Standard Marine Vocabulary
5.1 ITU Phonetic Alphabet (Alfa to Zulu) & Pronunciation Standards 5.2 Maritime Phonetic Numbering System & Position Reporting Formats 5.3 Standard Marine Procedural Words (Prowords: Over, Out, Roger, Say Again, Read Back)
5.2 Maritime Phonetic Numbering System & Position Reporting Formats
Key Takeaways Explain This Topic AI
Marine radiotelephony uses standardized digit pronunciations—such as ZEE-RO, WUN, TOO, TREE, FOW-ER, FIFE, SIX, SEV-EN, AIT, and NI-NER—to guarantee clarity over poor radio channels.
Numbers in marine communication are transmitted digit-by-digit (e.g., VHF Channel 72 is Channel SEV-EN TOO, MMSI 235012345 is transmitted as individual digits) except for round hundreds (HUN-DRED) and thousands (TOO-ZAND).
Geographical positions using latitude and longitude must be stated as degrees and minutes with cardinal directions, transmitting latitude first (2 digits for degrees) followed by longitude (always 3 digits for degrees, e.g., 001°15'W as 001 degree 15 minutes West).
Relative position reporting uses bearing in degrees True from a prominent, charted landmark followed by distance in nautical miles (e.g., 180 degrees True from Needles Lighthouse, distance 3 miles).
Decimal points in numeric values (such as radio frequencies or exact coordinates) must be explicitly spoken using the proword DECIMAL (pronounced DAY-SEE-MAL).
Last updated: July 2026
5.2 Maritime Phonetic Numbering System & Position Reporting Formats
Numerical data forms the backbone of maritime VHF transmissions. Whether stating a vessel's position during a Mayday distress call, identifying a working channel, reporting water depth, or transmitting a 9-digit Maritime Mobile Service Identity (MMSI), precise numerical transmission is critical to safety of life at sea.
To prevent numbers from being garbled over low-fidelity VHF voice channels, the ITU Maritime Radio Regulations specify standardized phonetic pronunciations for all digits, decimal points, and large numerical modifiers. Furthermore, strict formatting rules govern how geographical positions must be constructed and spoken.
Standardized Phonetic Digit Pronunciations
When speaking numbers over maritime VHF radio, ordinary conversational pronunciations are replaced by deliberate phonetic sounds. Certain digits are altered specifically to avoid confusion across international accent barriers (for instance, three is spoken as TREE to prevent non-native speakers from producing a soft 'th' sound, and five is spoken as FIFE to avoid confusion with nine or fire ).
- Digit / Symbol Phonetic Spelling Pronunciation & Syllable Stress Operational Purpose & Example
- 0 ZEERO ZEE -RO Clear zero sound: "Channel 10" -> WUN ZEE-RO
- 1 WUN WUN Sharp single syllable
- 2 TOO TOO Hard initial 't' sound
- 3 TREE TREE Eliminates 'th' sound: "30 knots" -> TREE ZEE-RO knots
- 4 FOWER FOW -ER Two distinct syllables to avoid sounding like 'for'
- 5 FIFE FIFE Hard 'f' ending eliminates confusion with 'fire' or 'fine'
- 6 SIX SIX Crisp 'x' sound
- 7 SEVEN SEV -EN Two clear syllables
- 8 EIGHT AIT Hard 't' sound
- 9 NINER NI -NER Two syllables to avoid confusion with German 'nein' or English 'nine'
- . DECIMAL DAY -SEE-MAL Used for radio frequencies, channels, or minutes
- 00 HUNDRED HUN -DRED Used only for round hundred quantities
- 000 TOUSAND TOO -ZAND Spelled without 'th': WUN TOO-ZAND
- Rules for Transmitting Digits & Numbers
Digit-by-Digit Transmission : As a general rule, all multi-digit numbers—including VHF channel numbers, MMSI numbers, call signs, positions, bearings, and speeds—must be spoken digit by digit .
VHF Channel 72 : Spoken as "Channel SEV-EN TOO" (never "Channel seventy-two").
VHF Channel 16 : Spoken as "Channel WUN SIX" (never "Channel sixteen").
MMSI 235012345 : Spoken as "TOO TREE FIFE ZEE-RO WUN TOO TREE FOW-ER FIFE" .
Round Hundreds and Thousands Exception : Whole hundreds and thousands may be spoken using HUNDRED and TOUSAND .
Distance 500 metres : Spoken as "FIFE HUN-DRED metres" .
Altitude 1,000 feet : Spoken as "WUN TOO-ZAND feet" .
Course 12,000 : Spoken as "WUN TOO TOO-ZAND" .
Decimal Point Pronunciation : When transmitting decimal numbers, such as VHF frequencies or exact coordinates, the word DECIMAL ( DAY-SEE-MAL ) must be inserted.
Frequency 156.8 MHz : Spoken as "WUN FIFE SIX DECIMAL AIT Megahertz" .
Latitude 50°45.2' N : Spoken as "FIFE ZEE-RO degrees FOW-ER FIFE DECIMAL TOO minutes North" .
Position Reporting Format 1: Latitude & Longitude
In maritime safety communications (such as Mayday, Pan Pan, or Securite broadcasts), the primary method of reporting position is by Latitude and Longitude .
Formatting Rules for Latitude and Longitude:
Order of Transmission : Latitude is always spoken FIRST, followed by Longitude .
Latitude Format : Expressed in degrees and minutes (plus decimal fractions of a minute if available), followed by the cardinal direction North or South .
Latitude degrees are expressed as 2 digits (00 to 90).
Example: 50°45' N -> "50 degrees 45 minutes North" (Phonetic: "FIFE ZEE-RO degrees FOW-ER FIFE minutes NORTH" ).
Longitude Format : Expressed in degrees and minutes , followed by East or West .
Longitude degrees must ALWAYS be expressed as 3 digits (000 to 180). This extra leading zero is critical to prevent confusion between latitude and longitude.
Example: 001°15' W -> "001 degree 15 minutes West" (Phonetic: "ZEE-RO ZEE-RO WUN degrees WUN FIFE minutes WEST" ). Standard Position Callout Example:
- "My position is Latitude Five Zero degrees Four Five minutes North,
- Longitude Zero Zero One degree One Five minutes West."
Exam Warning : Omitting the leading zero in longitude (e.g., saying "1 degree 15 minutes West" instead of "001 degree 15 minutes West") is a major error in the RYA SRC examination.
Position Reporting Format 2: Bearing & Distance from a Landmark
When GPS coordinates are unavailable, or when providing immediate tactical awareness to a nearby lifeboat or coastguard station, position can be reported as a Bearing and Distance from a prominent, charted landmark .
Formatting Rules for Bearing and Distance:
Bearing : Stated in degrees True (3-digit format from 000 to 350 degrees) from the landmark to the vessel.
Landmark : Must be a recognized, fixed, unambiguous object shown on Admiralty charts (e.g., lighthouse, headland, cardinal buoy, windfarm platform).
Distance : Stated in nautical miles (or cables for very short distances).
Structure & Standard Script:
[BEARING IN DEGREES TRUE] + "degrees True from" + [NAME OF LANDMARK] + "distance" + [DISTANCE IN NAUTICAL MILES] + "miles" Example 1: "Bearing 180 degrees True from Needles Lighthouse, distance 3 miles"
Phonetic: "WUN AIT ZEE-RO degrees True from Needles Lighthouse, distance TREE miles."
- Example 2: "Bearing 045 degrees True from Anvil Point, distance 12 miles"
- Phonetic: "ZEE-RO FOW-ER FIFE degrees True from Anvil Point, distance WUN TOO miles."
Notice that bearings are expressed as 3 digits (e.g., 045 as "ZEE-RO FOW-ER FIFE" ), and the reference point is specified clearly. Using these exact formats ensures search and rescue assets can plot your position within seconds on their digital charting displays.