Study guide
11.3 Instrument Approach Procedures & Minimums
FAA ADX Aircraft Dispatcher Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulations & Dispatcher Certification (14 CFR Part 65)
1.1 14 CFR Part 65 Eligibility, Privileges, Limitations & Retesting 1.2 Operational Control & Shared Dispatcher-PIC Responsibility 1.3 Dispatch Release Requirements, Amendments & Records
2 Chapter 2: Part 121 Domestic, Flag & Supplemental Operating Rules
2.1 Domestic vs. Flag vs. Supplemental Operational Rules 2.2 Dispatch Weather Minimums & Departure Rules 2.3 Takeoff Alternates & Clean Aircraft Concept
3 Chapter 3: Destination Alternates, Alternate Minimums & Redispatch
3.1 Destination Alternate Requirements (1-2-3 Rule & Flag/Supplemental) 3.2 Alternate Airport Weather Minimums (OpSpecs Table C055) 3.3 Marginal Weather Rule & Second Alternate Selection 3.4 En Route Redispatch & Reclearance Procedures
4 Chapter 4: Dispatcher & Flightcrew Duty Limitations and Rest (14 CFR § 121.465 & Part 117)
4.1 Dispatcher Duty Time Limitations & Rest Requirements 4.2 Flightcrew Duty & Rest Requirements (14 CFR Part 117) 4.3 Dispatcher Qualifications, Recurrent Training & Operating Familiarization
5 Chapter 5: Minimum Equipment Lists (MEL), CDL & Maintenance Dispatch
5.1 Master Minimum Equipment List (MMEL) & Operator MEL 5.2 Configuration Deviation List (CDL) & Missing Secondary Airframe Parts 5.3 Dispatch with Inoperative Equipment, Logbooks & Special Flight Permits
6 Chapter 6: Aviation Meteorology — Atmosphere, Pressure Systems & Fronts
6.1 Atmospheric Structure, Pressure Systems & Altimetry 6.2 Air Masses & Frontal Systems 6.3 Clouds, Atmospheric Stability & Fog 6.4 Earth Motion, Global Circulation & Regional/Local Weather Regimes
7 Chapter 7: Hazardous Aviation Weather — Convection, Icing & Turbulence
7.1 Thunderstorms & Severe Convection 7.2 Structural & Induction Icing 7.3 Turbulence, Jet Streams & Clear Air Turbulence (CAT) 7.4 Low-Level Windshear & Microburst Detection Systems
8 Chapter 8: Aviation Weather Products, Observations & Forecasts
8.1 Surface Weather Observations (METAR & SPECI) 8.2 Terminal Aerodrome Forecasts (TAF) 8.3 In-Flight Weather Advisories (PIREPs, AIRMETs, SIGMETs) 8.4 Upper-Air Analysis & Prognostic Weather Charts
9 Chapter 9: Airspace Structure, Air Traffic Control & Traffic Management
9.1 Airspace Classes & Operating Rules 9.2 Special Use Airspace & Temporary Flight Restrictions 9.3 Air Traffic Control Flow Management & Initiatives 9.4 NOTAM System & Airport Field Condition Reporting 9.5 Flight Plan Filing: Domestic and International (ICAO) Flight Plans
10 Chapter 10: IFR Navigation, Airway Structure & Charting
10.1 Ground-Based Navigation Facilities (VOR, TACAN, DME, ILS) 10.2 RNAV, RNP & Performance-Based Navigation (PBN) 10.3 En Route IFR Charts & High/Low Airway Navigation 10.4 Earth Reference, Time Standards, Chart Projections & Great-Circle Navigation
11 Chapter 11: Terminal Instrument Procedures — SIDs, STARs & Approaches
11.1 Standard Instrument Departures (SIDs) & Obstacle Departure Procedures (ODPs) 11.2 Standard Terminal Arrival Routes (STARs) & En Route Transitions 11.3 Instrument Approach Procedures & Minimums 11.4 Holding Procedures & Holding Pattern Calculations
12 Chapter 12: High-Altitude Transonic Aerodynamics & Jet Characteristics
12.1 Transonic Flow, Mach Number & Compressibility 12.2 Shock Waves, Mach Tuck & Shock Stall 12.3 Coffin Corner, Buffet Boundaries & Swept-Wing Aerodynamics
13 Chapter 13: Transport Category Turbine Aircraft Systems
13.1 Turbine Powerplants & Auxiliary Power Units 13.2 Electrical, Hydraulic & Pneumatic Systems 13.3 Pressurization, Environmental Control & Oxygen Systems 13.4 Flight Management Systems (FMS), Autoflight & Avionics
14 Chapter 14: Aircraft Weight, Balance & Loading
14.1 Weight Definitions & Structural Limitations 14.2 Center of Gravity (CG) Principles & Computations 14.3 Cargo Loading, Floor Load Limits & Load Manifests
15 Chapter 15: Transport Category Aircraft Performance & Limitations
15.1 Takeoff Performance & V-Speeds 15.2 Climb Gradients, Obstacle Clearance & Runway Limitations 15.3 En Route Engine Inoperative Performance & Drift-Down 15.4 Landing Performance & Runway Condition Assessment
16 Chapter 16: Practical Dispatch Flight Planning, Fuel Strategy & Emergencies
16.1 Domestic, Flag & Supplemental Fuel Requirements 16.2 Flight Planning, Route Selection & Equal Time Point (ETP) / PNR 16.3 Emergency Procedures, In-Flight Diversions & Security Threats 16.4 NTSB Part 830 Incident & Accident Notification Procedures 16.5 Flight Following, Overdue Aircraft & Post-Flight Duties
17 Chapter 17: Human Factors, ADM, CRM & Dispatch Communications
17.1 Human Factors & Human Error in Airline Dispatch 17.2 Aeronautical Decision Making, Judgment & Risk Management 17.3 Crew Resource Management, Dispatch Teamwork & Briefing Technique 17.4 Dispatch Communications, Data Link & Aeronautical Publications
11.3 Instrument Approach Procedures & Minimums
Key Takeaways Explain This Topic AI
Instrument approach procedures (IAPs) consist of five distinct segments under TERPS: Feeder route, Initial approach segment (IAF to IF), Intermediate segment (IF to FAF), Final approach segment (FAF to MAP), and Missed approach segment (MAP to holding/en route).
Precision approaches (ILS, GLS, MLS, PAR) utilize a Decision Altitude/Height (DA/DH) with continuous electronic vertical guidance, categorized from Cat I (200 ft HAT, 2400/1800 RVR) through Cat II (100 ft DH, 1200/1000 RVR) to Cat III (IIIa RVR 700, IIIb RVR 150–700, IIIc zero-zero).
Non-precision approaches (LOC, VOR, RNAV LNAV) establish a Minimum Descent Altitude (MDA) below which descent is prohibited without required visual references; modern operations employ Continuous Descent Final Approach (CDFA) using a Derived Decision Altitude (DDA = MDA + 50 ft).
Aircraft approach categories (A through E) are determined by 1.3 × Vso or Vref at maximum landing weight; transport category aircraft typically operate under Category C (121–140 kts) or Category D (141–165 kts), governed by expanded TERPS circling radii (negative 'C' icon).
Under 14 CFR § 91.175(c), descent below DA or MDA requires a normal rate of descent, required flight visibility, and distinct visual reference to the runway environment; approach lights permit descent to 100 feet above TDZE unless the red terminating bars or red side row bars are distinctly visible.
Last updated: September 2026
11.3 Instrument Approach Procedures & Minimums
The instrument approach is the critical operational link connecting the terminal arrival phase to touchdown. For the Part 121 aircraft dispatcher, approach procedures govern airport eligibility, dispatch weather minimums, takeoff and destination alternate requirements under 14 CFR Part 121 Subpart U, and in-flight reanalysis when conditions deteriorate below minimums. Understanding the precise architectural differences between precision, APV, and non-precision approaches—as well as the legal threshold requirements of 14 CFR § 91.175 —is paramount for operational control.
The Five Segments of an Instrument Approach Procedure
Under FAA TERPS (Order 8260.3), every standard instrument approach procedure (IAP) is divided into up to five distinct segments, each with specific obstacle clearance criteria, lateral widths, and operational objectives: Instrument Approach Segments Architecture:
- [En Route Airway] ---> [FEEDER ROUTE]
- |
- v
- [INITIAL SEGMENT] (Begins at IAF - Initial Approach Fix)
- |
- v
- [INTERMEDIATE SEGMENT] (Begins at IF - Intermediate Fix)
- |
- v
- [FINAL SEGMENT] (Begins at FAF - Final Approach Fix)
- / \ • Precision: Glideslope intercept (lightning bolt)
- / \ • Non-Precision: Maltese cross
- v v
- [Touchdown] [MISSED APPROACH SEGMENT] (Begins at MAP: Missed Approach Point)
Feeder Route : An en route track connecting an en route fix or airway to the Initial Approach Fix (IAF). Feeder routes publish minimum altitudes providing 1,000 feet of obstacle clearance (2,000 feet in designated mountainous areas).
Initial Approach Segment : Begins at the Initial Approach Fix (IAF) and ends at the Intermediate Fix (IF). It transitions the aircraft from the en route environment to the approach course, accommodating procedure turns, holding in lieu of procedure turns, or DME arcs. Minimum obstacle clearance is 1,000 feet in the primary area.
Intermediate Segment : Begins at the Intermediate Fix (IF) and terminates at the Final Approach Fix (FAF). This segment aligns the aircraft with the final approach course and permits speed reduction and aircraft configuration (flaps and gear). Obstacle clearance tapers from 1,000 feet down to 500 feet.
Final Approach Segment (FAS) : Begins at the Final Approach Fix (FAF) or Final Approach Point (FAP) and ends at the Missed Approach Point (MAP) or touchdown. This segment provides vertical descent to visual alignment with the runway:
Non-Precision Chart Symbol : Represented on profile views by a Maltese Cross .
Precision Chart Symbol : Represented by a Lightning Bolt indicating electronic glideslope intercept at the specified altitude.
Missed Approach Segment : Begins at the Missed Approach Point (MAP) and terminates at an en route fix, NAVAID, or designated holding fix. It guarantees obstacle clearance during a go-around, provided the missed approach climb begins at or above the MAP and maintains at least 200 ft/NM (or published climb gradient).
Precision Approaches: ILS Categories and Minimums
A precision approach is an instrument approach based on a facility using navigation systems that provide both lateral course guidance (localizer/azimuth) and vertical glidepath guidance (glideslope/elevation) conforming to ICAO Category I, II, or III standards. The minimum altitude on a precision approach is designated as a Decision Altitude (DA) in feet MSL, or Decision Height (DH) in feet AGL (measured above the Touchdown Zone Elevation, TDZE, via radio altimeter).
Instrument Landing System (ILS) Categories
Approach Category Decision Height (DH / HAT) Minimum Runway Visual Range (RVR) Operating & Equipment Requirements
Category I (Cat I) 200 ft (60 m) RVR 2,400 ft (1/2 SM / 800 m); Can be reduced to RVR 1,800 ft Standard flight instruments; RVR 1,800 ft requires TDZ/CL lights, or approved HUD / Flight Director / Autopilot (OpSpec C052).
Category II (Cat II) 100 ft (30 m) RVR 1,200 ft (350 m); Can be reduced to RVR 1,000 ft Special aircrew certification, dual ILS receivers, autoland or HUD, radar altimeter, OpSpec C059 authorization.
Category IIIa (Cat IIIa) < 50 ft (15 m) or No DH RVR 700 ft (200 m) Fail-passive or fail-operational autoland system; visual reference to touchdown zone required to complete landing.
Category IIIb (Cat IIIb) < 50 ft (15 m) or No DH RVR 150 ft to 700 ft (50–200 m) Fail-operational autoland with operational automatic rollout control system; taxi guidance required.
Category IIIc (Cat IIIc) No DH (0 ft) Zero RVR (Zero-Zero) Fully automatic landing and rollout. Not currently operational in commercial US aviation due to ground taxi limitations.
Decision Altitude (DA) vs. Minimum Descent Altitude (MDA) : At a Decision Altitude (DA) on a precision approach, the decision to land or execute a missed approach must be made at that exact point . The aircraft is permitted to dip momentarily below the DA during the initiation of the missed approach go-around. In stark contrast, an aircraft may never descend below a Minimum Descent Altitude (MDA) under any circumstances until the required visual references are established!
- Non-Precision Approaches (NPA) and APV
- Non-Precision Approaches (MDA)
Approaches providing lateral guidance only without electronic vertical guidance:
Types : Localizer (LOC), VOR, NDB, and RNAV (GPS) approaches flown to LNAV-only minimums .
Vertical Floor : Governed by a Minimum Descent Altitude (MDA) . The pilot descends along a step-down profile to the MDA, leveling off until reaching the Missed Approach Point (MAP).
HAT vs. HAA :
Height Above Touchdown (HAT) : The height of the MDA (or DA) above the Touchdown Zone Elevation (TDZE). Published for straight-in approaches.
Height Above Airport (HAA) : The height of the MDA above the published airport elevation. Published for circling approaches.
Continuous Descent Final Approach (CDFA) & Derived Decision Altitude (DDA)
Traditional "dive-and-drive" step-down descents on non-precision approaches historically led to elevated Controlled Flight Into Terrain (CFIT) accidents. Modern Part 121 air carriers mandate Continuous Descent Final Approach (CDFA) techniques:
The aircraft flies a continuous, stabilized 3-degree descent from the FAF to the runway threshold.
Derived Decision Altitude (DDA) : Because an aircraft executing a go-around from a continuous descent will experience momentary downward inertia, Part 121 carriers add an operational buffer (typically 50 feet ) to the charted MDA: DDA = Published MDA + 50 feet \text{DDA} = \text{Published MDA} + 50 \text{ feet} DDA = Published MDA + 50 feet
The flight crew treats the DDA as a Decision Altitude: if visual references are not sighted upon reaching the DDA, the missed approach is initiated immediately, guaranteeing the aircraft never penetrates the hard MDA floor.
Approaches with Vertical Guidance (APV)
APV procedures provide lateral course guidance and electronic vertical glideslope guidance, but do not meet full ICAO precision approach standards:
LNAV/VNAV (Lateral Navigation / Vertical Navigation) : Relies on barometric vertical navigation (Baro-VNAV). Critical Dispatch Limitation : Highly sensitive to non-standard temperatures. At cold temperatures, true altitude is significantly lower than indicated altitude, requiring cold temperature altitude corrections or causing uncompensated Baro-VNAV to become unavailable.
LPV (Localizer Performance with Vertical Guidance) : Utilizes Space-Based Augmentation Systems (SBAS / WAAS) to provide extremely precise lateral angular guidance and vertical glidepaths down to minimums as low as 200 feet HAT , behaving operationally like an ILS.
- Straight-in vs. Circling Approaches
- Straight-in Minimums Criteria
An instrument approach qualifies for published straight-in minimums only when:
The final approach course aligns within 30 degrees of the runway centerline (within 15 degrees for GPS/RNAV approaches).
The descent gradient from the FAF to the runway threshold allows a normal rate of descent (typically not exceeding 400 ft/NM).
Circling Approaches
If the final approach course exceeds 30 degrees of runway alignment, or if a steep descent gradient is required, only Circling Minimums are published. A circling approach is an IFR approach to one runway followed by visual maneuvering to land on another runway (or the opposite end of the same runway).
Aircraft Approach Categories (14 CFR § 97.3)
Approach categories are based on 1.3 times the stalling speed in the landing configuration at maximum certified landing weight ( 1.3 V s o 1.3 V_{so} 1.3 V so ) or reference landing speed ( V r e f V_{ref} V re f ):
Category Speed Range ( 1.3 V s o 1.3 V_{so} 1.3 V so or V r e f V_{ref} V re f ) Typical Aircraft Operations
- Category A Less than 91 knots Light single-engine and light twin general aviation
- Category B 91 knots to 120 knots Heavy turboprops, light business jets
- Category C 121 knots to 140 knots Standard transport turbojets (B737, A320, MD-80)
- Category D 141 knots to 165 knots Heavy transport turbojets (B777, B787, A330, A350)
- Category E Greater than 165 knots Dedicated high-performance military aircraft
- Circling Protected Airspace: Standard vs. Expanded TERPS
Circling protected airspace provides 300 feet of Required Obstacle Clearance (ROC) over all obstacles within a specified radius drawn from the threshold of all runways at the airport:
Standard TERPS Radii (Pre-2012) : Constant radius regardless of airport elevation:
Cat A: 1.3 NM | Cat B: 1.5 NM | Cat C: 1.7 NM | Cat D: 2.3 NM | Cat E: 4.5 NM
Expanded TERPS Circling Radii (Negative "C" Icon) : Depicted on approach charts by a white letter "C" inside a black box. Recognizes that as airport elevation increases, higher true airspeed (TAS) requires wider bank angles and larger turn radiuses. Protected airspace expands dynamically with airport elevation:
Example Cat C Expanded : 2.7 NM (sea level) up to 3.3 NM (high elevation).
Example Cat D Expanded : 3.6 NM (sea level) up to 4.5 NM (high elevation).
Visual References for Descent Below DA/MDA (14 CFR § 91.175(c))
Under 14 CFR § 91.175(c) , no pilot may operate an aircraft below the authorized MDA or continue an approach below the authorized DA/DH unless three cumulative conditions are met:
Continuous Normal Maneuvers : The aircraft is continuously in a position from which a descent to a landing on the intended runway can be made at a normal rate of descent using normal maneuvers, and the descent will touchdown within the touchdown zone.
Flight Visibility : The flight visibility is not less than the visibility prescribed in the standard instrument approach procedure being flown.
Visual Reference to the Runway Environment : At least one of the following visual references for the intended runway is distinctly visible and identifiable to the pilot:
The 10 Recognized Visual References (§ 91.175(c)(3))
The approach light system (ALS).
The threshold.
The threshold markings.
The threshold lights.
The runway end identifier lights (REIL).
The visual glideslope indicator (VASI or PAPI).
The touchdown zone or touchdown zone markings.
The touchdown zone lights.
The runway or runway markings.
The runway lights.
The Critical Approach Light System Rule (§ 91.175(c)(3)(i))
If the flight crew sights the Approach Light System (ALS) , they are legally permitted to descend below DA/MDA, BUT with a strict legal ceiling :
The pilot may NOT descend below 100 feet above the Touchdown Zone Elevation (TDZE) using the approach lights as the sole visual reference, UNLESS the red terminating bars or the red side row bars are also distinctly visible and identifiable (found on ALSF-1 and ALSF-2 high-intensity systems).
Once the red terminating or side row bars—or any of the other 9 runway references—are distinctly sighted, the aircraft may descend below 100 ft TDZE to touchdown.