Study guide
12.1 Transonic Flow, Mach Number & Compressibility
FAA ADX Aircraft Dispatcher Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulations & Dispatcher Certification (14 CFR Part 65)
1.1 14 CFR Part 65 Eligibility, Privileges, Limitations & Retesting 1.2 Operational Control & Shared Dispatcher-PIC Responsibility 1.3 Dispatch Release Requirements, Amendments & Records
2 Chapter 2: Part 121 Domestic, Flag & Supplemental Operating Rules
2.1 Domestic vs. Flag vs. Supplemental Operational Rules 2.2 Dispatch Weather Minimums & Departure Rules 2.3 Takeoff Alternates & Clean Aircraft Concept
3 Chapter 3: Destination Alternates, Alternate Minimums & Redispatch
3.1 Destination Alternate Requirements (1-2-3 Rule & Flag/Supplemental) 3.2 Alternate Airport Weather Minimums (OpSpecs Table C055) 3.3 Marginal Weather Rule & Second Alternate Selection 3.4 En Route Redispatch & Reclearance Procedures
4 Chapter 4: Dispatcher & Flightcrew Duty Limitations and Rest (14 CFR § 121.465 & Part 117)
4.1 Dispatcher Duty Time Limitations & Rest Requirements 4.2 Flightcrew Duty & Rest Requirements (14 CFR Part 117) 4.3 Dispatcher Qualifications, Recurrent Training & Operating Familiarization
5 Chapter 5: Minimum Equipment Lists (MEL), CDL & Maintenance Dispatch
5.1 Master Minimum Equipment List (MMEL) & Operator MEL 5.2 Configuration Deviation List (CDL) & Missing Secondary Airframe Parts 5.3 Dispatch with Inoperative Equipment, Logbooks & Special Flight Permits
6 Chapter 6: Aviation Meteorology — Atmosphere, Pressure Systems & Fronts
6.1 Atmospheric Structure, Pressure Systems & Altimetry 6.2 Air Masses & Frontal Systems 6.3 Clouds, Atmospheric Stability & Fog 6.4 Earth Motion, Global Circulation & Regional/Local Weather Regimes
7 Chapter 7: Hazardous Aviation Weather — Convection, Icing & Turbulence
7.1 Thunderstorms & Severe Convection 7.2 Structural & Induction Icing 7.3 Turbulence, Jet Streams & Clear Air Turbulence (CAT) 7.4 Low-Level Windshear & Microburst Detection Systems
8 Chapter 8: Aviation Weather Products, Observations & Forecasts
8.1 Surface Weather Observations (METAR & SPECI) 8.2 Terminal Aerodrome Forecasts (TAF) 8.3 In-Flight Weather Advisories (PIREPs, AIRMETs, SIGMETs) 8.4 Upper-Air Analysis & Prognostic Weather Charts
9 Chapter 9: Airspace Structure, Air Traffic Control & Traffic Management
9.1 Airspace Classes & Operating Rules 9.2 Special Use Airspace & Temporary Flight Restrictions 9.3 Air Traffic Control Flow Management & Initiatives 9.4 NOTAM System & Airport Field Condition Reporting 9.5 Flight Plan Filing: Domestic and International (ICAO) Flight Plans
10 Chapter 10: IFR Navigation, Airway Structure & Charting
10.1 Ground-Based Navigation Facilities (VOR, TACAN, DME, ILS) 10.2 RNAV, RNP & Performance-Based Navigation (PBN) 10.3 En Route IFR Charts & High/Low Airway Navigation 10.4 Earth Reference, Time Standards, Chart Projections & Great-Circle Navigation
11 Chapter 11: Terminal Instrument Procedures — SIDs, STARs & Approaches
11.1 Standard Instrument Departures (SIDs) & Obstacle Departure Procedures (ODPs) 11.2 Standard Terminal Arrival Routes (STARs) & En Route Transitions 11.3 Instrument Approach Procedures & Minimums 11.4 Holding Procedures & Holding Pattern Calculations
12 Chapter 12: High-Altitude Transonic Aerodynamics & Jet Characteristics
12.1 Transonic Flow, Mach Number & Compressibility 12.2 Shock Waves, Mach Tuck & Shock Stall 12.3 Coffin Corner, Buffet Boundaries & Swept-Wing Aerodynamics
13 Chapter 13: Transport Category Turbine Aircraft Systems
13.1 Turbine Powerplants & Auxiliary Power Units 13.2 Electrical, Hydraulic & Pneumatic Systems 13.3 Pressurization, Environmental Control & Oxygen Systems 13.4 Flight Management Systems (FMS), Autoflight & Avionics
14 Chapter 14: Aircraft Weight, Balance & Loading
14.1 Weight Definitions & Structural Limitations 14.2 Center of Gravity (CG) Principles & Computations 14.3 Cargo Loading, Floor Load Limits & Load Manifests
15 Chapter 15: Transport Category Aircraft Performance & Limitations
15.1 Takeoff Performance & V-Speeds 15.2 Climb Gradients, Obstacle Clearance & Runway Limitations 15.3 En Route Engine Inoperative Performance & Drift-Down 15.4 Landing Performance & Runway Condition Assessment
16 Chapter 16: Practical Dispatch Flight Planning, Fuel Strategy & Emergencies
16.1 Domestic, Flag & Supplemental Fuel Requirements 16.2 Flight Planning, Route Selection & Equal Time Point (ETP) / PNR 16.3 Emergency Procedures, In-Flight Diversions & Security Threats 16.4 NTSB Part 830 Incident & Accident Notification Procedures 16.5 Flight Following, Overdue Aircraft & Post-Flight Duties
17 Chapter 17: Human Factors, ADM, CRM & Dispatch Communications
17.1 Human Factors & Human Error in Airline Dispatch 17.2 Aeronautical Decision Making, Judgment & Risk Management 17.3 Crew Resource Management, Dispatch Teamwork & Briefing Technique 17.4 Dispatch Communications, Data Link & Aeronautical Publications
12.1 Transonic Flow, Mach Number & Compressibility
Key Takeaways Explain This Topic AI
The speed of sound (a) in air depends strictly on absolute temperature (T in Kelvin): a = 38.945 √T knots, equaling 661.47 knots at standard sea level (+15°C / 288.15 K) and declining to approximately 573.8 knots at the tropopause (-56.5°C / 216.65 K); speed of sound is entirely independent of atmospheric pressure and air density.
Mach number (M) is the ratio of True Airspeed (TAS) to the local speed of sound (a): M = TAS / a; during a climb at constant Calibrated Airspeed (CAS), TAS increases while ambient temperature drops, causing flight Mach number to climb progressively until reaching the crossover altitude.
Aerodynamic flow regimes are classified by free-stream Mach and local airfoil velocity: Subsonic (M < 0.75), Transonic (0.75 ≤ M ≤ 1.20, where subsonic and supersonic flow coexist simultaneously across the airframe), Supersonic (1.20 < M ≤ 5.0), and Hypersonic (M > 5.0).
Critical Mach Number (Mcrit) is the free-stream Mach number at which airflow over any portion of the aircraft (typically the upper wing camber) first reaches local Mach 1.0; exceeding Mcrit initiates supersonic expansion pockets and normal shock wave formation.
Drag Divergence Mach Number (Mdd) is the speed at which aerodynamic drag rises sharply due to wave drag and shock-induced boundary layer separation, formally defined where dCd/dM = 0.10 (a 20-count drag rise over subsonic levels); Mdd occurs approximately 0.06 to 0.10 Mach above Mcrit.
Last updated: September 2026
12.1 Transonic Flow, Mach Number & Compressibility
Commercial transport-category turbojet aircraft—such as the Boeing 737 MAX, 777, 787, and Airbus A320neo, A350—operate predominantly within the transonic flight regime , cruising at speeds between Mach 0.76 and Mach 0.86 at flight levels ranging from FL 310 to FL 410. At these high operating altitudes and velocities, the assumptions of classical low-speed aerodynamics no longer hold true. Air cannot be treated as an incompressible fluid of uniform density; instead, dynamic compressibility, localized supersonic airflow acceleration, and shock wave formation govern aircraft lift, drag, flight stability, and engine performance.
For the 14 CFR Part 121 certificated aircraft dispatcher, an advanced understanding of transonic flow physics is fundamental. Dispatchers are legally responsible under 14 CFR § 121.533 for flight planning, calculating accurate en route true airspeeds (TAS), forecasting fuel consumption based on aerodynamic drag rise, evaluating atmospheric temperature deviations (ISA anomalies), and ensuring adequate buffet margins across varying gross weights and cruise flight levels.
The Physics of Sound in the Atmosphere
Sound is transmitted through a gas medium as a longitudinal pressure wave. As a physical body moves through air, it generates pressure disturbances that propagate outward in all directions at the local speed of sound, designated by the mathematical symbol a . These acoustic pressure pulses effectively "warn" oncoming air particles of the approaching aircraft, enabling the airflow to divide smoothly around the wings and fuselage.
The Governing Thermodynamic Equation
In fluid mechanics and thermodynamics, the local speed of sound in an ideal gas is derived from Newton's and Laplace's acoustic wave equations: a = γ R T a = \sqrt{\gamma R T} a = γ RT
Where:
γ \gamma γ (Gamma) = Ratio of specific heats ( c p / c v c_p / c_v c p / c v ) for dry air, a constant equal to 1.40 .
R R R = Specific gas constant for dry air, equal to 287.05 J/(kg ⋅ K) 287.05\text{ J/(kg}\cdot\text{K)} 287.05 J/(kg ⋅ K) (or 1 , 716.5 ft ⋅ lb / ( slug ⋅ ∘ R ) 1,716.5\text{ ft}\cdot\text{lb}/(\text{slug}\cdot{^\circ}\text{R}) 1 , 716.5 ft ⋅ lb / ( slug ⋅ ∘ R ) in English engineering units).
T T T = Absolute ambient temperature of the air, measured in Kelvin (K) ( T Kelvin = T Celsius + 273.15 T_{\text{Kelvin}} = T_{\text{Celsius}} + 273.15 T Kelvin = T Celsius + 273.15 ) or Rankine ( ∘ R ^\circ\text{R} ∘ R ).
Practical Aeronautical Speed of Sound Formula
By inserting standard atmospheric constants for γ \gamma γ and R R R and converting the velocity output into knots (nautical miles per hour), aeronautical engineers and the FAA define the practical formula for the speed of sound: a = 38.945 T Kelvin knots a = 38.945 \sqrt{T_{\text{Kelvin}}}\text{ knots} a = 38.945 T Kelvin knots
Alternatively, when temperature is expressed in degrees Rankine: a = 29.064 T Rankine knots a = 29.064 \sqrt{T_{\text{Rankine}}}\text{ knots} a = 29.064 T Rankine knots
Baseline at Standard Sea Level
Under International Standard Atmosphere (ISA) conditions at sea level:
Ambient temperature = + 15.0 ∘ C +15.0^\circ\text{C} + 15. 0 ∘ C ( 288.15 K 288.15\text{ K} 288.15 K or 518.67 ∘ R 518.67^\circ\text{R} 518.6 7 ∘ R ).
Sea level speed of sound ( a 0 a_0 a 0 ): a 0 = 38.945 × 288.15 = 38.945 × 16.97498 = 661.47 knots a_0 = 38.945 \times \sqrt{288.15} = 38.945 \times 16.97498 = 661.47\text{ knots} a 0 = 38.945 × 288.15 = 38.945 × 16.97498 = 661.47 knots
This translates to approximately 1 , 116.4 ft/sec 1,116.4\text{ ft/sec} 1 , 116.4 ft/sec , 761.2 statute mph 761.2\text{ statute mph} 761.2 statute mph , or 340.3 m/s 340.3\text{ m/s} 340.3 m/s .
Variation with Altitude: The Standard Lapse Rate
Within the troposphere (from sea level up to 36,089 feet MSL), atmospheric temperature decreases at the standard ISA lapse rate of 1.98 ∘ C 1.98^\circ\text{C} 1.9 8 ∘ C ( 3.56 ∘ F 3.56^\circ\text{F} 3.5 6 ∘ F ) per 1,000 feet of altitude gain. Because the speed of sound is directly proportional to the square root of absolute temperature, the speed of sound decreases continuously as altitude increases:
At 10,000 feet MSL (ISA: − 4.8 ∘ C / 268.35 K -4.8^\circ\text{C} / 268.35\text{ K} − 4. 8 ∘ C /268.35 K ): a = 38.945 × 268.35 = 637.9 knots a = 38.945 \times \sqrt{268.35} = 637.9\text{ knots} a = 38.945 × 268.35 = 637.9 knots .
At 20,000 feet MSL (ISA: − 24.6 ∘ C / 248.55 K -24.6^\circ\text{C} / 248.55\text{ K} − 24. 6 ∘ C /248.55 K ): a = 38.945 × 248.55 = 613.9 knots a = 38.945 \times \sqrt{248.55} = 613.9\text{ knots} a = 38.945 × 248.55 = 613.9 knots .
At 30,000 feet MSL (ISA: − 44.4 ∘ C / 228.75 K -44.4^\circ\text{C} / 228.75\text{ K} − 44. 4 ∘ C /228.75 K ): a = 38.945 × 228.75 = 589.0 knots a = 38.945 \times \sqrt{228.75} = 589.0\text{ knots} a = 38.945 × 228.75 = 589.0 knots .
At the Tropopause ( 36,089 feet MSL / FL 360 ; ISA: − 56.5 ∘ C / 216.65 K -56.5^\circ\text{C} / 216.65\text{ K} − 56. 5 ∘ C /216.65 K ): a trop = 38.945 × 216.65 = 38.945 × 14.7190 = 573.24 knots ≈ 573.8 knots a_{\text{trop}} = 38.945 \times \sqrt{216.65} = 38.945 \times 14.7190 = 573.24\text{ knots} \approx 573.8\text{ knots} a trop = 38.945 × 216.65 = 38.945 × 14.7190 = 573.24 knots ≈ 573.8 knots
The Common Dispatch and Pilot Trap: Density vs. Temperature
A persistent misconception among student pilots and novice dispatchers is that sound travels slower at high altitude because the air is "thinner" (i.e., lower air density or barometric pressure).
Aerodynamic Reality : The speed of sound depends strictly on absolute temperature , and is completely independent of air density and barometric pressure. In the ideal gas equation of state: P = ρ R T ⟹ P ρ = R T P = \rho R T \implies \frac{P}{\rho} = R T P = ρRT ⟹ ρ P = RT
As an aircraft climbs, barometric pressure ( P P P ) and air density ( ρ \rho ρ ) decrease simultaneously at almost identical rates. Their ratio ( P / ρ P / \rho P / ρ ) is governed solely by temperature ( T T T ). Therefore, density and pressure cancel each other out entirely in the acoustic wave equation.
The Definitive Proof : In the isothermal layer of the lower stratosphere—extending from FL 360 (36,089 feet) up to approximately FL 650 (65,600 feet)—the ambient temperature remains constant at − 56.5 ∘ C -56.5^\circ\text{C} − 56. 5 ∘ C ( 216.65 K 216.65\text{ K} 216.65 K ) in standard atmosphere. Over this vertical climb of nearly 30,000 feet, atmospheric pressure and air density drop by more than 70% . Yet, because temperature remains constant, the local speed of sound remains completely constant at 573.8 knots ! If sound speed were dependent on density or pressure, it would decrease dramatically throughout the stratosphere, which does not occur.
Mach Number Definition & Operational Calculations
In high-speed aerodynamics, aircraft speed is expressed as a nondimensional ratio known as the Mach number (M) , named after Austrian physicist Ernst Mach: M = TAS a = True Airspeed Local Speed of Sound M = \frac{\text{TAS}}{a} = \frac{\text{True Airspeed}}{\text{Local Speed of Sound}} M = a TAS = Local Speed of Sound True Airspeed
If an aircraft flies at the local speed of sound, its Mach number is 1.0 . If it flies at 80% of the local speed of sound, its Mach number is 0.80 .
Airspeed Hierarchy: IAS, CAS, EAS, TAS, and Mach
Indicated Airspeed (IAS) : The raw dynamic pressure ( q = 1 2 ρ V 2 q = \frac{1}{2} \rho V^2 q = 2 1 ρ V 2 ) sensed by the pitot-static system and displayed on the primary flight display (PFD).
Calibrated Airspeed (CAS) : IAS corrected for pitot-static instrument and position errors.
Equivalent Airspeed (EAS) : CAS corrected for adiabatic compressible flow effects at high speed and high altitude. At low speeds below Mach 0.30, air is incompressible and CAS equals EAS. Above Mach 0.30, air compresses ahead of the pitot tube, causing CAS to overread relative to actual dynamic pressure.
True Airspeed (TAS) : The actual physical velocity of the aircraft relative to the undisturbed ambient air mass. TAS is EAS corrected for atmospheric density ratio ( σ = ρ / ρ 0 \sigma = \rho / \rho_0 σ = ρ / ρ 0 ): TAS = EAS σ \text{TAS} = \frac{\text{EAS}}{\sqrt{\sigma}} TAS = σ EAS
Mach Number : The ratio of TAS to the local temperature-dependent speed of sound ( M = TAS / a M = \text{TAS} / a M = TAS / a ).
The Climb Profile and Crossover Altitude
During climb out from departure, jet transport aircraft follow a dual-speed schedule published in the Flight Management System (FMS) and dispatch flight plan (e.g., "280 kts / Mach .78"):
Constant CAS Climb Segment : From 10,000 feet up to the mid-twenties flight levels, the aircraft maintains a constant Calibrated Airspeed (e.g., 280 knots CAS). As the aircraft climbs through declining air density ( ρ ↓ \rho \downarrow ρ ↓ ), TAS must continuously increase to maintain that constant dynamic pressure. Simultaneously, ambient temperature lapses, lowering the local speed of sound ( a ↓ a \downarrow a ↓ ). Because TAS is rising while a a a is falling, the flight Mach number increases rapidly ( M = TAS ↑ / a ↓ M = \text{TAS} \uparrow / a \downarrow M = TAS ↑ / a ↓ ).
The Crossover Altitude : As Mach number continues to climb, it eventually reaches the assigned target cruise Mach (e.g., Mach 0.78). The specific pressure altitude where constant CAS and target cruise Mach intersect is known as the crossover altitude (typically between FL 280 and FL 320, depending on gross weight and CAS selected).
Constant Mach Climb Segment : Above the crossover altitude, the autopilot/autothrottle switches pitch and thrust modes to fly a constant Mach number (Mach 0.78). As the aircraft continues climbing from the crossover altitude to final cruise (e.g., FL 370) through dropping temperatures, the local speed of sound continues to decrease. To maintain a constant Mach ratio ( M = TAS / a = 0.78 M = \text{TAS} / a = 0.78 M = TAS / a = 0.78 ), the aircraft's True Airspeed (TAS) must gradually decrease , and Calibrated Airspeed (CAS) decreases significantly .
Dispatch Operational Calculation: Atmospheric Temperature Impact on TAS
Aircraft dispatchers routinely calculate true airspeed and groundspeed to construct precise flight plans and fuel reserves. Ambient air temperature exerts a direct, linear effect on TAS at a given Mach number.
Worked Example : An airline flight is dispatched to cruise at FL 370 at a fixed Mach 0.82 .
Scenario A: Standard ISA Conditions ( − 56.5 ∘ C / 216.65 K -56.5^\circ\text{C} / 216.65\text{ K} − 56. 5 ∘ C /216.65 K ) :
Local speed of sound: a = 38.945 × 216.65 = 573.8 knots a = 38.945 \times \sqrt{216.65} = 573.8\text{ knots} a = 38.945 × 216.65 = 573.8 knots .
True Airspeed: TAS = 0.82 × 573.8 = 470.5 knots \text{TAS} = 0.82 \times 573.8 = \mathbf{470.5\text{ knots}} TAS = 0.82 × 573.8 = 470.5 knots .
Scenario B: Warm Air Mass (ISA +15°C: Actual OAT = − 41.5 ∘ C / 231.65 K -41.5^\circ\text{C} / 231.65\text{ K} − 41. 5 ∘ C /231.65 K ) :
Local speed of sound: a = 38.945 × 231.65 = 38.945 × 15.220 = 592.7 knots a = 38.945 \times \sqrt{231.65} = 38.945 \times 15.220 = 592.7\text{ knots} a = 38.945 × 231.65 = 38.945 × 15.220 = 592.7 knots .
True Airspeed: TAS = 0.82 × 592.7 = 486.0 knots \text{TAS} = 0.82 \times 592.7 = \mathbf{486.0\text{ knots}} TAS = 0.82 × 592.7 = 486.0 knots .
Dispatch Significance :
In the ISA +15°C warm air mass, the aircraft flies at 486.0 knots TAS —an increase of 15.5 knots TAS compared to ISA, despite flying the exact same Mach 0.82.
This higher TAS increases groundspeed in zero-wind conditions, shortening flight time.
However, warmer temperatures reduce air density, which impairs engine thrust efficiency and increases specific fuel consumption (SFC). The dispatcher must account for the net fuel burn trade-off.
Aerodynamic Flow Regimes
Aerodynamicists classify flight into four distinct flow regimes based on free-stream Mach number ( M ∞ M_\infty M ∞ ) and the local flow velocity over the aircraft structure:
Flow Regime Free-Stream Mach Range Local Airflow Characteristics Shock Wave Presence Jet Transport Relevance
Subsonic M < 0.75 M < 0.75 M < 0.75 Airflow over the entire airframe remains strictly subsonic ( M local < 1.0 M_{\text{local}} < 1.0 M local < 1.0 ) None Low-altitude operations, holding, terminal area departures/arrivals
Transonic 0.75 ≤ M ≤ 1.20 0.75 \le M \le 1.20 0.75 ≤ M ≤ 1.20 Subsonic and supersonic airflow coexist simultaneously across different regions of the airframe Normal shock waves present on upper/lower surfaces Standard cruise regime for all commercial transport jet airliners
Supersonic 1.20 < M ≤ 5.0 1.20 < M \le 5.0 1.20 < M ≤ 5.0 Free-stream and local airflow across the entire airframe exceed Mach 1.0 ( M local > 1.0 M_{\text{local}} > 1.0 M local > 1.0 ) Oblique and bow shock waves attached/detached at leading edges Concorde, military fighters (F-15, F-22, F-35)
Hypersonic M > 5.0 M > 5.0 M > 5.0 High supersonic flow characterized by high kinetic friction and chemical dissociation of gas molecules Severe shock layers, plasma sheath formation Spacecraft re-entry vehicles (SpaceX Starship, Space Shuttle), experimental vehicles
Why the Transonic Regime is aerodynamically unique
In pure subsonic flight ( M < 0.75 M < 0.75 M < 0.75 ), pressure waves travel upstream faster than the airplane advances, smoothly parting the air before the wing arrives. In pure supersonic flight ( M > 1.20 M > 1.20 M > 1.20 ), the airplane travels faster than all pressure disturbances, creating well-defined bow and tail shock waves.
The transonic regime ( 0.75 ≤ M ≤ 1.20 0.75 \le M \le 1.20 0.75 ≤ M ≤ 1.20 ) is the most aerodynamically complex and volatile because the airflow is mixed : while the aircraft as a whole travels subsonically ( M ∞ < 1.0 M_\infty < 1.0 M ∞ < 1.0 ), localized airflow accelerating over the cambered upper wing surface reaches and exceeds supersonic speeds ( M local > 1.0 M_{\text{local}} > 1.0 M local > 1.0 ). The boundary where supersonic local flow abruptly decelerates back to subsonic speed generates shock waves, severe boundary layer separation, and dramatic shifts in aerodynamic forces.
- Critical Mach Number (Mcrit)
- Aerodynamic Definition
The Critical Mach Number ( M crit M_{\text{crit}} M crit ) is defined as the lowest free-stream Mach number ( M ∞ M_\infty M ∞ ) at which airflow over any portion of the aircraft structure first reaches local Mach 1.0 ( M local = 1.0 M_{\text{local}} = 1.0 M local = 1.0 ) .
Mechanics of Local Airflow Acceleration
When undisturbed free-stream air approaches an airfoil, it must divert around the contour. By Bernoulli's principle and the continuity equation:
The air flowing over the curved upper surface of the wing is forced through a constricted aerodynamic channel.
To conserve mass, this airflow must accelerate.
The peak local velocity occurs at the point of maximum wing camber and thickness.
If an aircraft with an M crit M_{\text{crit}} M crit of 0.76 is flying at a free-stream speed of Mach 0.70, the air flowing over the peak upper camber may accelerate to local Mach 0.92—fast, but still subsonic. However, as the aircraft accelerates to Mach 0.76 , the air rushing over the peak camber reaches exactly Mach 1.0 . This free-stream speed of 0.76 is the aircraft's Critical Mach Number.
Factors Influencing Mcrit
Variable Change Effect on M crit M_{\text{crit}} M crit Aerodynamic Rationale
Wing Thickness-to-Chord ( t / c t/c t / c ) Thicker wing Decreases M crit M_{\text{crit}} M crit Thicker profile forces greater air displacement and higher peak surface acceleration.
Wing Thickness-to-Chord ( t / c t/c t / c ) Thinner wing Increases M crit M_{\text{crit}} M crit Less air displacement allows higher free-stream speeds before local Mach 1.0 is reached.
Airfoil Camber Higher camber Decreases M crit M_{\text{crit}} M crit Pronounced upper curvature induces high local flow acceleration.
Angle of Attack (AoA / α \alpha α ) Increased AoA Decreases M crit M_{\text{crit}} M crit High pitch angles increase the peak suction peak on the upper leading edge, accelerating local flow to Mach 1.0 sooner.
Wing Sweepback ( Λ \Lambda Λ ) Increased sweep Increases M crit M_{\text{crit}} M crit Decomposes flow into chordwise and spanwise vectors; only chordwise flow accelerates over camber.
Aircraft Gross Weight Heavier weight Decreases M crit M_{\text{crit}} M crit Heavier weight requires higher lift coefficient ( C L C_L C L ), requiring higher AoA, which lowers M crit M_{\text{crit}} M crit .
- Compressibility Effects & Drag Divergence Mach Number (Mdd)
- The Development of the Supersonic Pocket
When an aircraft exceeds its Critical Mach Number ( M ∞ > M crit M_\infty > M_{\text{crit}} M ∞ > M crit ):
A localized pocket of supersonic airflow expands on the upper wing surface.
Within this pocket, local velocity ranges from Mach 1.0 to Mach 1.2 or higher.
However, the undisturbed air behind the wing is subsonic. The supersonic airflow cannot expand into the trailing edge indefinitely; it must decelerate to match the ambient subsonic pressure.
Nature accomplishes this abrupt supersonic-to-subsonic transition through a normal shock wave standing perpendicular to the wing surface.
Wave Drag Generation
Prior to shock wave formation, aircraft drag consists almost entirely of parasite drag (skin friction and form drag) and induced drag (drag due to lift generation). Once a shock wave forms, a third form of drag emerges: wave drag .
Wave drag represents the massive irreversible thermodynamic loss of kinetic energy converted into heat and entropy as air slams through the shock discontinuity. Furthermore, the shock wave creates a severe adverse pressure gradient that separates the boundary layer immediately behind it, creating a wide, turbulent wake and immense pressure drag.
Drag Divergence Mach Number ( M dd M_{\text{dd}} M dd )
As flight speed increases beyond M crit M_{\text{crit}} M crit , wave drag and separation drag escalate at an exponential rate. Aerodynamicists define the Drag Divergence Mach Number ( M dd M_{\text{dd}} M dd ) (also termed the Mach number of drag divergence or drag rise): M dd = The free-stream Mach number where d C d d M = 0.10 M_{\text{dd}} = \text{The free-stream Mach number where } \frac{dC_d}{dM} = 0.10 M dd = The free-stream Mach number where d M d C d = 0.10
In standard aeronautical certification practice, M dd M_{\text{dd}} M dd is the speed at which total aircraft drag increases by 20 drag counts (where 1 count = Δ C d \Delta C_d Δ C d of 0.0001, so 20 counts = 0.0020) above the subsonic baseline.
Typically, M dd M_{\text{dd}} M dd occurs approximately 0.06 to 0.10 Mach above M crit M_{\text{crit}} M crit . Beyond M dd M_{\text{dd}} M dd , the thrust required to overcome drag increases so violently that standard jet engine thrust cannot sustain level flight, and fuel flow skyrockets catastrophically.
Supercritical Airfoil Technology
Modern commercial airliners (Boeing 777/787, Airbus A320neo/A350) employ supercritical airfoils to delay drag divergence:
Upper Surface Geometry : Unlike conventional airfoils with highly curved upper surfaces, supercritical wings are remarkably flat on top . This flattened upper surface reduces peak local flow acceleration, creating a broad, weak supersonic pocket rather than an intense, peaked shock wave.
Aft Camber (Cusped Trailing Edge) : Downward curvature at the lower trailing edge recovers the lift lost by flattening the upper surface.
Operational Benefit : Supercritical design increases M crit M_{\text{crit}} M crit and pushes M dd M_{\text{dd}} M dd closer to Mach 0.85+. Furthermore, it allows engineers to design thicker wings ( t / c t/c t / c of 12-14% vs. 8-10%) without drag penalties, providing massive internal fuel tank volume and high structural rigidity.
Atmospheric and Speed-of-Sound Reference Table
- Altitude (ft MSL) Flight Level ISA Temp (°C) Absolute Temp (K) Speed of Sound (kts) TAS at Mach 0.80 (kts)
- 0 (Sea Level) Surface + 15.0 ∘ C +15.0^\circ\text{C} + 15. 0 ∘ C 288.15 K 661.5 kts 529.2 kts
- 10,000 FL 100 − 4.8 ∘ C -4.8^\circ\text{C} − 4. 8 ∘ C 268.35 K 637.9 kts 510.3 kts
- 18,000 FL 180 − 20.7 ∘ C -20.7^\circ\text{C} − 20. 7 ∘ C 252.45 K 618.7 kts 495.0 kts
- 24,000 FL 240 − 32.5 ∘ C -32.5^\circ\text{C} − 32. 5 ∘ C 240.65 K 604.1 kts 483.3 kts
- 30,000 FL 300 − 44.4 ∘ C -44.4^\circ\text{C} − 44. 4 ∘ C 228.75 K 589.0 kts 471.2 kts
- 36,089 (Tropopause) FL 360 − 56.5 ∘ C -56.5^\circ\text{C} − 56. 5 ∘ C 216.65 K 573.8 kts 459.0 kts
- 39,000 FL 390 − 56.5 ∘ C -56.5^\circ\text{C} − 56. 5 ∘ C (Isothermal) 216.65 K 573.8 kts 459.0 kts
- 41,000 FL 410 − 56.5 ∘ C -56.5^\circ\text{C} − 56. 5 ∘ C (Isothermal) 216.65 K 573.8 kts 459.0 kts