Study guide
15.4 Landing Performance & Runway Condition Assessment
FAA ADX Aircraft Dispatcher Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulations & Dispatcher Certification (14 CFR Part 65)
1.1 14 CFR Part 65 Eligibility, Privileges, Limitations & Retesting 1.2 Operational Control & Shared Dispatcher-PIC Responsibility 1.3 Dispatch Release Requirements, Amendments & Records
2 Chapter 2: Part 121 Domestic, Flag & Supplemental Operating Rules
2.1 Domestic vs. Flag vs. Supplemental Operational Rules 2.2 Dispatch Weather Minimums & Departure Rules 2.3 Takeoff Alternates & Clean Aircraft Concept
3 Chapter 3: Destination Alternates, Alternate Minimums & Redispatch
3.1 Destination Alternate Requirements (1-2-3 Rule & Flag/Supplemental) 3.2 Alternate Airport Weather Minimums (OpSpecs Table C055) 3.3 Marginal Weather Rule & Second Alternate Selection 3.4 En Route Redispatch & Reclearance Procedures
4 Chapter 4: Dispatcher & Flightcrew Duty Limitations and Rest (14 CFR § 121.465 & Part 117)
4.1 Dispatcher Duty Time Limitations & Rest Requirements 4.2 Flightcrew Duty & Rest Requirements (14 CFR Part 117) 4.3 Dispatcher Qualifications, Recurrent Training & Operating Familiarization
5 Chapter 5: Minimum Equipment Lists (MEL), CDL & Maintenance Dispatch
5.1 Master Minimum Equipment List (MMEL) & Operator MEL 5.2 Configuration Deviation List (CDL) & Missing Secondary Airframe Parts 5.3 Dispatch with Inoperative Equipment, Logbooks & Special Flight Permits
6 Chapter 6: Aviation Meteorology — Atmosphere, Pressure Systems & Fronts
6.1 Atmospheric Structure, Pressure Systems & Altimetry 6.2 Air Masses & Frontal Systems 6.3 Clouds, Atmospheric Stability & Fog 6.4 Earth Motion, Global Circulation & Regional/Local Weather Regimes
7 Chapter 7: Hazardous Aviation Weather — Convection, Icing & Turbulence
7.1 Thunderstorms & Severe Convection 7.2 Structural & Induction Icing 7.3 Turbulence, Jet Streams & Clear Air Turbulence (CAT) 7.4 Low-Level Windshear & Microburst Detection Systems
8 Chapter 8: Aviation Weather Products, Observations & Forecasts
8.1 Surface Weather Observations (METAR & SPECI) 8.2 Terminal Aerodrome Forecasts (TAF) 8.3 In-Flight Weather Advisories (PIREPs, AIRMETs, SIGMETs) 8.4 Upper-Air Analysis & Prognostic Weather Charts
9 Chapter 9: Airspace Structure, Air Traffic Control & Traffic Management
9.1 Airspace Classes & Operating Rules 9.2 Special Use Airspace & Temporary Flight Restrictions 9.3 Air Traffic Control Flow Management & Initiatives 9.4 NOTAM System & Airport Field Condition Reporting 9.5 Flight Plan Filing: Domestic and International (ICAO) Flight Plans
10 Chapter 10: IFR Navigation, Airway Structure & Charting
10.1 Ground-Based Navigation Facilities (VOR, TACAN, DME, ILS) 10.2 RNAV, RNP & Performance-Based Navigation (PBN) 10.3 En Route IFR Charts & High/Low Airway Navigation 10.4 Earth Reference, Time Standards, Chart Projections & Great-Circle Navigation
11 Chapter 11: Terminal Instrument Procedures — SIDs, STARs & Approaches
11.1 Standard Instrument Departures (SIDs) & Obstacle Departure Procedures (ODPs) 11.2 Standard Terminal Arrival Routes (STARs) & En Route Transitions 11.3 Instrument Approach Procedures & Minimums 11.4 Holding Procedures & Holding Pattern Calculations
12 Chapter 12: High-Altitude Transonic Aerodynamics & Jet Characteristics
12.1 Transonic Flow, Mach Number & Compressibility 12.2 Shock Waves, Mach Tuck & Shock Stall 12.3 Coffin Corner, Buffet Boundaries & Swept-Wing Aerodynamics
13 Chapter 13: Transport Category Turbine Aircraft Systems
13.1 Turbine Powerplants & Auxiliary Power Units 13.2 Electrical, Hydraulic & Pneumatic Systems 13.3 Pressurization, Environmental Control & Oxygen Systems 13.4 Flight Management Systems (FMS), Autoflight & Avionics
14 Chapter 14: Aircraft Weight, Balance & Loading
14.1 Weight Definitions & Structural Limitations 14.2 Center of Gravity (CG) Principles & Computations 14.3 Cargo Loading, Floor Load Limits & Load Manifests
15 Chapter 15: Transport Category Aircraft Performance & Limitations
15.1 Takeoff Performance & V-Speeds 15.2 Climb Gradients, Obstacle Clearance & Runway Limitations 15.3 En Route Engine Inoperative Performance & Drift-Down 15.4 Landing Performance & Runway Condition Assessment
16 Chapter 16: Practical Dispatch Flight Planning, Fuel Strategy & Emergencies
16.1 Domestic, Flag & Supplemental Fuel Requirements 16.2 Flight Planning, Route Selection & Equal Time Point (ETP) / PNR 16.3 Emergency Procedures, In-Flight Diversions & Security Threats 16.4 NTSB Part 830 Incident & Accident Notification Procedures 16.5 Flight Following, Overdue Aircraft & Post-Flight Duties
17 Chapter 17: Human Factors, ADM, CRM & Dispatch Communications
17.1 Human Factors & Human Error in Airline Dispatch 17.2 Aeronautical Decision Making, Judgment & Risk Management 17.3 Crew Resource Management, Dispatch Teamwork & Briefing Technique 17.4 Dispatch Communications, Data Link & Aeronautical Publications
15.4 Landing Performance & Runway Condition Assessment
Key Takeaways Explain This Topic AI
Under 14 CFR § 121.195, a turbojet transport category airplane must be dispatched so that it can come to a full stop within 60% of the effective runway length (Landing Distance Available - LDA) from a height of 50 feet over the threshold.
The 60% landing rule establishes a mandatory dry runway safety multiplier of 1.67 (1 / 0.60); for wet runways, § 121.195(d) requires an additional 15% margin, resulting in a 1.92 multiplier over unfactored flight test distance.
The Takeoff and Landing Performance Assessment (TALPA) framework uses the Runway Condition Assessment Matrix (RCAM) to assign Runway Condition Codes (RWYCC 6 down to 0) based on contaminant type and depth for real-time landing calculations.
Dynamic hydroplaning speed is governed by Horne's formula: Vp = 9 * sqrt(P) (where P is tire pressure in psi) for non-rotating tires and 7.7 * sqrt(P) for rotating tires; exceeding Vp on flooded runways causes total loss of braking and directional friction.
Dispatch landing calculations under § 121.195 strictly prohibit crediting thrust reversers on dry runways; however, in-flight Time-of-Arrival (TOA) assessments require factoring actual runway conditions, autobrakes, and reverser availability with a minimum 15% safety buffer.
Last updated: September 2026
15.4 Landing Performance & Runway Condition Assessment
Landing a transport category turbojet aircraft weighing upwards of 150,000 to 800,000 pounds onto a concrete strip at speeds exceeding 130 to 160 knots is an exercise in extreme energy dissipation. Kinetic energy ( E k = 1 2 m V 2 E_k = \frac{1}{2} m V^2 E k = 2 1 m V 2 ) must be converted entirely into thermal heat through multi-disc carbon brakes, aerodynamic drag from ground spoilers, and reverse thrust—all within a strictly defined stretch of pavement.
Under Title 14 CFR Part 121 Subpart I (§ 121.195 for destination airports and § 121.197 for alternate airports), the FAA establishes rigid regulatory landing limitations that govern dispatch releases. Furthermore, following major runway overrun accidents, the FAA revolutionized operational landing assessments through the Takeoff and Landing Performance Assessment (TALPA) initiative and the Runway Condition Assessment Matrix (RCAM) .
Certification Landing Distance vs. Factored Dispatch Distance
To understand dispatch landing rules, one must distinguish between the manufacturer's certification flight test landing distance and the factored operational landing distance mandated by law.
Certification Landing Distance (14 CFR § 25.125)
During airworthiness certification under 14 CFR § 25.125, manufacturer test pilots establish the Unfactored Landing Distance under aggressive, ideal conditions:
Screen Height : The aircraft crosses the runway threshold at exactly 50 feet above the surface at reference landing speed ( V r e f ≥ 1.23 V s r V_{ref} \ge 1.23 V_{sr} V re f ≥ 1.23 V sr ). In legacy aircraft, V r e f ≥ 1.30 V s 0 V_{ref} \ge 1.30 V_{s0} V re f ≥ 1.30 V s 0 .
Touchdown : The test pilot executes an aggressive, firm touchdown with minimal float (typically touching down within 1,000 to 1,200 feet of the threshold).
Braking : Immediate, maximum anti-skid wheel braking is applied the microsecond the main gear touches the ground.
Spoilers : Ground spoilers/speedbrakes deploy automatically on wheel spin-up, dumping lift and transferring aircraft weight to the tires.
Thrust Reversers : Under 14 CFR § 25.125, no reverse thrust credit is permitted . Stopping distance must be demonstrated using wheel brakes and aerodynamic drag alone.
The 60% Rule (14 CFR § 121.195(b))
Because line airline pilots fly passenger-laden aircraft in rain, turbulence, crosswinds, and night conditions without aggressively slamming aircraft onto the runway, commercial aircraft cannot be dispatched using unfactored flight test data.
Under 14 CFR § 121.195(b), no person operating a turbine-engine-powered transport category airplane may take off unless the aircraft's weight on arrival at the destination airport will permit a full-stop landing within 60 % 60\% 60% of the effective runway length (Landing Distance Available - LDA) from a point 50 feet above the intersection of the obstruction clearance plane and the runway. +-----------------------------------------------------------------------------------------+
- | TOTAL RUNWAY LENGTH (LDA) |
- | 100% |
- +------------------------------------------------------------+----------------------------+
- | UNFACTORED CERTIFICATION LANDING DISTANCE | SAFETY BUFFER MARGIN |
- | 60% of Effective Runway Length | 40% Runway Safety Buffer|
- +------------------------------------------------------------+----------------------------+
- |<------------------------- Required Dry Factored Runway = Distance / 0.60 -------------->|
- Mathematical Derivation of the 1.67 Multiplier
If an aircraft's unfactored landing distance must fit within 60 % 60\% 60% ( 0.60 0.60 0.60 ) of the runway, the minimum required runway length is mathematically derived as: Required Runway Length (Dry) = Unfactored Landing Distance 0.60 = 1.667 × Unfactored Landing Distance \text{Required Runway Length (Dry)} = \frac{\text{Unfactored Landing Distance}}{0.60} = 1.667 \times \text{Unfactored Landing Distance} Required Runway Length (Dry) = 0.60 Unfactored Landing Distance = 1.667 × Unfactored Landing Distance
The 1.67 Multiplier : The dispatcher must ensure that the published Landing Distance Available (LDA) is at least 1.67 times 1.67\text{ times} 1.67 times the manufacturer's certified dry landing distance. The remaining 40 % 40\% 40% of the runway serves as a vital safety buffer for flare float, non-standard pilot technique, high threshold speeds, and rubber-coated pavement.
Wet Runway Dispatch Requirements (14 CFR § 121.195(d))
Water on a runway drastically reduces the tire-to-pavement friction coefficient and introduces hydroplaning risks. The FAA imposes an additional mandatory buffer for wet runways.
The 115% Wet Multiplier
Under 14 CFR § 121.195(d), when weather reports or forecasts indicate that the runway at the destination airport may be wet or slippery at the estimated time of arrival (ETA), the required runway length must be at least 115 % 115\% 115% of the runway length required for dry conditions: Required Runway Length (Wet) = 1.15 × Factored Dry Runway Length \text{Required Runway Length (Wet)} = 1.15 \times \text{Factored Dry Runway Length} Required Runway Length (Wet) = 1.15 × Factored Dry Runway Length
Total Combined Multiplier over Unfactored Distance
Substituting the dry 1.667 1.667 1.667 factor into the wet formula yields the total multiplier over the raw certification landing distance: Required Runway (Wet) = 1.15 × ( Unfactored Distance 0.60 ) = 1.9167 × Unfactored Distance ≈ 1.92 × Unfactored Distance \text{Required Runway (Wet)} = 1.15 \times \left( \frac{\text{Unfactored Distance}}{0.60} \right) = 1.9167 \times \text{Unfactored Distance} \approx \mathbf{1.92} \times \text{Unfactored Distance} Required Runway (Wet) = 1.15 × ( 0.60 Unfactored Distance ) = 1.9167 × Unfactored Distance ≈ 1.92 × Unfactored Distance
Worked Dispatch Example :
A flight is planning to land at Chicago O'Hare (ORD). The aircraft manufacturer publishes an unfactored landing distance of 4 , 000 feet 4,000\text{ feet} 4 , 000 feet for the estimated landing weight.
Dry Runway Dispatch Requirement : LDA Required = 4 , 000 0.60 = 4 , 000 × 1.667 = 6 , 668 feet \text{LDA Required} = \frac{4,000}{0.60} = 4,000 \times 1.667 = \mathbf{6,668\text{ feet}} LDA Required = 0.60 4 , 000 = 4 , 000 × 1.667 = 6 , 668 feet
Wet Runway Dispatch Requirement (rain forecasted at ETA): LDA Required = 6 , 668 × 1.15 = 4 , 000 × 1.917 = 7 , 668 feet \text{LDA Required} = 6,668 \times 1.15 = 4,000 \times 1.917 = \mathbf{7,668\text{ feet}} LDA Required = 6 , 668 × 1.15 = 4 , 000 × 1.917 = 7 , 668 feet
If the available runway (LDA) is 7,200 feet, the aircraft can legally land if the runway is dry, but cannot legally be dispatched if the runway is forecasted to be wet at arrival! The dispatcher must reduce payload, burn more fuel, or plan for a longer runway.
TALPA & The Runway Condition Assessment Matrix (RCAM)
In December 2005, Southwest Airlines Flight 1248 overran Runway 31C at Chicago Midway Airport during a heavy snowstorm, crashing through the airport boundary fence and into vehicle traffic. The NTSB investigation revealed a dangerous regulatory gap: dispatchers were planning flights using pre-departure factored distances, while flight crews lacked standardized tools to assess actual stopping distance on contaminated runways upon arrival.
In response, the FAA convened the Takeoff and Landing Performance Assessment (TALPA) Aviation Rulemaking Committee , culminating in Advisory Circular AC 25-31, AC 25-32, AC 91-79B , and Safety Alert for Operators SAFO 19001 .
The Core TALPA Paradigm Shift
TALPA established two distinct operational assessments:
Pre-Departure Dispatch Assessment (14 CFR § 121.195) : The traditional static calculation ( 1.67 1.67 1.67 dry, 1.92 1.92 1.92 wet) performed by the dispatcher to ensure initial legal release.
Time-of-Arrival (TOA) Assessment : A real-time calculation performed by the flight crew and dispatcher prior to top-of-descent, using actual reported runway contaminants, current temperature, density altitude, wind, and aircraft braking configurations.
Mandatory TOA Safety Margin : The landing distance required at time of arrival must include a minimum 15 % 15\% 15% safety margin added to the unfactored operational landing distance.
The Runway Condition Assessment Matrix (RCAM)
TALPA replaced subjective pilot braking reports with the standardized Runway Condition Assessment Matrix (RCAM) . Airport operators inspect runways and generate Field Condition (FICON) NOTAMs containing standardized Runway Condition Codes (RWYCC) from 6 (Dry) down to 0 (Nil Braking) for each third of the runway (touchdown, midpoint, rollout):
RWYCC Pavement Surface Contaminant Depth Pilot Braking Action Report Deceleration & Directional Control Distance Multiplier (Approx)
6 Dry clean pavement None GOOD Normal braking response Baseline ( 1.0 × 1.0\times 1.0 × )
5 Frost; Wet pavement; Slush/Dry Snow ≤ 3 mm \le 3\text{ mm} ≤ 3 mm ( 1 / 8 " 1/8" 1/8" ) GOOD Normal braking, slight friction loss 1.15 – 1.25 × 1.15\text{–}1.25\times 1.15 – 1.25 ×
4 Compacted snow at OAT ≤ − 15 ∘ C \le -15^\circ\text{C} ≤ − 1 5 ∘ C Any GOOD TO MEDIUM Braking deceleration visibly reduced 1.30 – 1.40 × 1.30\text{–}1.40\times 1.30 – 1.40 ×
3 Wet ("slippery when wet"); Compacted snow at OAT > − 15 ∘ C > -15^\circ\text{C} > − 1 5 ∘ C ; Dry/wet snow over compacted snow Any MEDIUM Braking noticeably reduced; directional control reduced 1.50 – 1.65 × 1.50\text{–}1.65\times 1.50 – 1.65 ×
2 Standing water; Slush > 3 mm > 3\text{ mm} > 3 mm ( 1 / 8 " 1/8" 1/8" ) MEDIUM TO POOR Braking significantly reduced; directional control difficult 1.75 – 2.00 × 1.75\text{–}2.00\times 1.75 – 2.00 ×
1 Ice (smooth, uncompacted) Any POOR Braking severely degraded; directional control marginal 2.20 – 2.60 × 2.20\text{–}2.60\times 2.20 – 2.60 ×
0 Wet ice; Water over compacted snow; Snow over ice Any NIL BRAKING INEFFECTIVE; TOTAL LOSS OF CONTROL OPERATIONS PROHIBITED
The Absolute Mandate of RWYCC 0 (NIL Braking)
Under FAA regulations, airline Standard Operating Procedures, and Operations Specifications:
Whenever a runway reports RWYCC 0 or a pilot reports braking action as "NIL" , ALL TAKEOFF AND LANDING OPERATIONS ARE STRICTLY PROHIBITED on that runway.
If a flight is en route and the destination runway deteriorates to NIL braking, the aircraft must enter a holding pattern until conditions improve or immediately divert to its designated alternate airport.
Hydroplaning Physics: Classifications & Calculations
When a tire encounters water on a runway, fluid cannot be displaced instantaneously. Under specific dynamic conditions, hydrodynamic pressure lifts the tire completely off the pavement, destroying braking friction. [ HYDROPLANING TIRE ]
- OAT / Water Layer
- /---------\
- Direction of Motion / \
- -----------------------> | TIRE BODY |
- \ /
- \---------/
- ========================================= ~~~ ============================= Runway
- [ Water Wedge ]
- Hydrodynamic Lift Exceeds Tire Pressure
- 1. Dynamic Hydroplaning
Dynamic Hydroplaning occurs when standing water is deeper than the tire tread depth (typically deeper than 3 mm 3\text{ mm} 3 mm or 0.125 inches 0.125\text{ inches} 0.125 inches ). As the tire rolls forward, water piles up in front of the tire, forming a high-pressure dynamic hydrodynamic wedge. At a critical velocity, the upward hydrodynamic force equals the downward weight supported by the tire. The tire is completely lifted off the pavement, floating on a liquid film of water. Friction drops essentially to zero; wheel braking and rudder steering are completely ineffective.
Horne's Dynamic Hydroplaning Formulas
NASA scientist Walter B. Horne developed the governing empirical equations relating dynamic hydroplaning speed ( V p V_p V p in knots) to internal tire pressure ( P P P in pounds per square inch - psi) :
For Non-Rotating / Spin-Down Tires (Touchdown Hydroplaning) : V p (touchdown) = 9 × P (psi) V_{p\text{ (touchdown)}} = 9 \times \sqrt{P\text{ (psi)}} V p (touchdown) = 9 × P (psi)
For Rotating / Spin-Up Tires (Rollout Hydroplaning) : V p (rolling) = 7.7 × P (psi) V_{p\text{ (rolling)}} = 7.7 \times \sqrt{P\text{ (psi)}} V p (rolling) = 7.7 × P (psi)
Worked Example : An Airbus A321 has main gear tire pressures serviced to 200 psi 200\text{ psi} 200 psi .
Hydroplaning speed on touchdown (wheels spin-down): V p = 9 × 200 = 9 × 14.142 = 127.3 knots V_p = 9 \times \sqrt{200} = 9 \times 14.142 = \mathbf{127.3\text{ knots}} V p = 9 × 200 = 9 × 14.142 = 127.3 knots
Hydroplaning speed during rolling deceleration: V p = 7.7 × 200 = 7.7 × 14.142 = 108.9 knots V_p = 7.7 \times \sqrt{200} = 7.7 \times 14.142 = \mathbf{108.9\text{ knots}} V p = 7.7 × 200 = 7.7 × 14.142 = 108.9 knots
Operational Application : If the A321 touches down on a flooded runway at 140 knots 140\text{ knots} 140 knots , the tires will hydroplane instantly upon touchdown because groundspeed exceeds 127.3 knots 127.3\text{ knots} 127.3 knots . The tires will fail to spin up, preventing antiskid systems from operating and causing immediate loss of directional control.
2. Viscous Hydroplaning
Viscous Hydroplaning occurs with extremely thin films of moisture (less than 0.025 mm 0.025\text{ mm} 0.025 mm or 0.001 inches 0.001\text{ inches} 0.001 inches ) on very smooth, non-porous surfaces—specifically on runway touchdown zones coated with dense layers of baked rubber deposits . The microscopic fluid film behaves like a high-viscosity lubricant, preventing the tire rubber from gripping the pavement micro-texture. Unlike dynamic hydroplaning, viscous hydroplaning can occur at speeds far below Horne's dynamic formula threshold and can persist down to low taxi speeds.
3. Reverted Rubber (Steam) Hydroplaning
Reverted Rubber Hydroplaning occurs during prolonged locked-wheel skids on wet or icy runways (typically following the failure or absence of an operative anti-skid system). Friction heats the trapped water film between the skidding tire and the pavement, boiling the water into high-pressure superheated steam . The steam cushion lifts the tire off the runway. The intense steam heat (temperatures exceeding 200 ∘ C 200^\circ\text{C} 20 0 ∘ C ) chemically breaks down ("reverts") the vulcanized tire rubber back into its raw, uncured, sticky state. After landing, the tire exhibits a distinct "steamed" oval patch of reverted rubber.
Engineering Mitigations: Transverse Runway Grooving
Under FAA Advisory Circular AC 150/5320-12, commercial runways are cut with transverse grooves :
Standard Dimensions: 1 / 4 inch 1/4\text{ inch} 1/4 inch deep , 1 / 4 inch 1/4\text{ inch} 1/4 inch wide , spaced 1 – 1 / 4 inches 1\text{–}1/4\text{ inches} 1 – 1/4 inches apart .
Grooves provide high-capacity escape channels for standing water beneath the tire contact footprint, virtually eliminating dynamic hydroplaning under normal rainfall rates.
- Autobrakes & Thrust Reverser Operational Policies
- Thrust Reverser Credit Policy
Dry Runway Dispatch (§ 121.195) : Under FAA regulations, thrust reversers cannot be credited for meeting dry runway dispatch landing requirements. The aircraft must be capable of stopping within 60 % 60\% 60% of the runway using wheel brakes and spoilers alone.
Contaminated Operational Landing (TALPA) : During actual operations on contaminated surfaces (RWYCC 3, 2, 1), thrust reversers become the most critical stopping device. Unlike wheel brakes—which depend entirely on tire-to-pavement friction—thrust reversers generate aerodynamic decelerating force directly against the air mass, completely independent of runway friction. If thrust reversers are inoperative under the MEL, landing distance on contaminated runways increases by 20 % 20\% 20% to 40 % 40\% 40% .
Automated Braking Systems (Autobrakes)
Autobrake systems use closed-loop feedback from the anti-skid computers to maintain a constant, commanded deceleration rate (measured in ft/sec 2 \text{ft/sec}^2 ft/sec 2 or m / s 2 m/s^2 m / s 2 ):
Low Settings (Autobrake 1 or 2) : Designed for passenger comfort and brake wear conservation on long, dry runways (typically 4 – 6 ft/sec 2 4\text{–}6\text{ ft/sec}^2 4 – 6 ft/sec 2 ).
Medium / High Settings (Autobrake 3, 4, or Max) : Selected for short runways, contaminated conditions, or heavy gross weights (commanding deceleration rates up to 12 – 14 ft/sec 2 12\text{–}14\text{ ft/sec}^2 12 – 14 ft/sec 2 ).
On slippery runways, autobrakes automatically modulate hydraulic pressure to match the maximum grip delivered by the anti-skid system.