Study guide
13.4 Redispatch and En Route Re-release Procedures
FAA Aircraft Dispatcher Certificate ADX
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulations, Certification & Operational Control
1.1 Part 65 Subpart C: Certification, Eligibility & Currency 1.2 Operational Control & Dispatcher-PIC Joint Responsibility 1.3 Domestic, Flag & Supplemental Operations Framework 1.4 Dispatch Release Elements, Signatures & Recordkeeping 1.5 Regulations, Manuals, Crew Qualifications, and Source Control
2 Chapter 2: Atmospheric Physics, Pressure Systems & Fronts
2.1 Atmospheric Structure, Standard Atmosphere & Altimetry 2.2 Air Masses, Frontal Systems & Frontogenesis 2.3 Atmospheric Stability, Lapse Rates & Cloud Formation 2.4 Earth Motion, Regional Weather, Local Winds, and Water Phase Changes
3 Chapter 3: Aviation Weather Hazards & Severe Weather Avoidance
3.1 Structural and Induction Icing: Types, Accretion & Operations 3.2 Thunderstorms, Squall Lines, Microbursts & Low-Level Windshear 3.3 Clear Air Turbulence (CAT), Mountain Waves & Jet Streams 3.4 Low Ceilings, Fog Types & Visibility Restrictions 3.5 Hurricanes, Typhoons, Tornadoes, and Tropical Dispatch Hazards
4 Chapter 4: Weather Observations, Forecasts & Advisories Decoding
4.1 METAR and SPECI Surface Observations: Decoding & Operations 4.2 Terminal Aerodrome Forecasts (TAF): Groups & Timing 4.3 Pilot Weather Reports (PIREP): Coding, Severity & Urgent Alerts 4.4 In-Flight Advisories: AIRMETs, SIGMETs & Convective SIGMETs 4.5 Weather Collection, NWS Facilities, GFA, and EWINS
5 Chapter 5: Aviation Weather Charts & Upper-Air Analysis
5.1 Surface Analysis & Radar Summary Charts 5.2 Constant Pressure Analysis & Winds Aloft (FB) 5.3 Significant Weather Prognostic Charts (SIGWX) 5.4 Satellite Imagery, Moisture-Stability Analysis, and Forecast Integration
6 Chapter 6: Air Navigation, Airspace Architecture & Route Structure
6.1 National Airspace System: Classes, Rules & Special Use 6.2 Ground-Based Navigation Aids & Standard Service Volumes 6.3 Area Navigation (RNAV), GNSS/GPS, PBN & RNP Fundamentals 6.4 En Route Airways, SIDs, STARs & Chart Interpretation 6.5 Earth Coordinates, UTC, Chart Projections, and Flight Instruments 6.6 North Atlantic, Pacific, RVSM, and Global Navigation Differences
7 Chapter 7: Instrument Approaches, Minimums & Airport Operations
7.1 Precision Approach Systems: ILS Categories & Tolerances 7.2 Non-Precision Approaches, RNAV & Decision Minimums (MDA/DA) 7.3 Takeoff Minimums, Lower-Than-Standard & Takeoff Alternates 7.4 Holding Procedures: Patterns, Speed Limits & Timing
8 Chapter 8: Subsonic Aerodynamics & Jet Aircraft Performance
8.1 Subsonic Jet Aerodynamics: Lift, Drag & Flight Regimes 8.2 High-Altitude Flight: Mach Number, Buffet & Coffin Corner 8.3 Transport Turbine Engines: Thrust, Specific Fuel & Bleed Air
9 Chapter 9: Transport Category Takeoff & Landing Runway Analysis
9.1 Takeoff Performance Speeds & Balanced Field Concept 9.2 Takeoff Climb Segments & Obstacle Clearance Gradients 9.3 Landing Performance: Field Lengths, 60% Rule & Contamination
10 Chapter 10: En Route Performance, Driftdown Profiles & ETOPS Operations
10.1 One/Two-Engine-Inoperative En Route Net Profiles & Driftdown 10.2 Extended-Range Operations (ETOPS): Philosophy & Regulations 10.3 ETOPS En Route Alternates: Adequate vs. Suitable & Critical Fuel
11 Chapter 11: Aircraft Weight & Balance, Center of Gravity, and Loading
11.1 Transport Aircraft Structural Weight Limits: Definitions & Rules 11.2 Center of Gravity Computations: Datum, Arm, Moment & Index 11.3 Mean Aerodynamic Chord (%MAC) Computations & Stability 11.4 Payload-Range Analysis, Zero Fuel Weight Tradeoffs & Loading
12 Chapter 12: Destination Alternate Airport Selection & Weather Rules
12.1 Destination Alternate Selection: 91.169 & Part 121 1-2-3 Rule 12.2 Flag & Supplemental Operations Destination Alternate Rules 12.3 Derived Alternate Minimums: 1-Nav and 2-Nav Facility Rules
13 Chapter 13: Part 121 Fuel Planning, Reserves & En Route Re-Release
13.1 Part 121 Domestic Fuel Requirements: Reserves & Calculations 13.2 Part 121 Flag Fuel Requirements: 10% Reserve & Island Rules 13.3 Supplemental Fuel Requirements & Holding Fuel Management 13.4 Redispatch and En Route Re-release Procedures
14 Chapter 14: Transport Systems, Pressurization & MEL/CDL Procedures
14.1 Transport Jet Auxiliary Power, Electrical, Hydraulic & Pneumatic Systems 14.2 Cabin Pressurization, Rapid Decompression & Oxygen Requirements 14.3 Master Minimum Equipment List (MMEL), MEL & CDL Procedures 14.4 Flight Controls, Autoflight, Fuel, Oil, Brakes, and Fire Protection
15 Chapter 15: Hazardous Materials, Duty Regulations & Emergency Procedures
15.1 Dangerous Goods Carriage by Air (49 CFR Part 175) & NOTOC 15.2 Dispatcher Duty Limitations, Rest Requirements & Fatigue 15.3 Emergency Authority, Declaration & Diversion Decision-Making 15.4 NTSB Part 830 Accident Reporting & Wreckage Preservation 15.5 Security, Overdue Aircraft, and FAA Emergency Services
16 Chapter 16: Communications, ATC, and Flight Plan Procedures
16.1 Voice, Data Link, Position Reports, and Lost Communications 16.2 ATC Facilities, Separation, ICAO Flight Plans, and Traffic Management
17 Chapter 17: Human Factors and Practical Dispatch Applications
17.1 Dispatch Resource Management, Human Error, and Risk Decisions 17.2 Manual Flight Planning, PIC Briefing, Flight Watch, and Postflight Closeout
13.4 Redispatch and En Route Re-release Procedures
Key Takeaways Explain This Topic AI
Redispatch (re-release or reclearance) is an advanced flight planning procedure utilized primarily on long-haul Part 121 Flag flights to eliminate carrying excessive 10% en route contingency fuel over the first major segment of the flight.
Under the four-point redispatch architecture, the flight is pre-dispatched to an intermediate airport (Airport A) while physically carrying sufficient fuel to satisfy full Flag reserves from an en route redispatch point (Point X) to the final destination (Airport B).
Prior to crossing Redispatch Point X, the dispatcher and PIC must evaluate actual fuel on board, confirm that destination and alternate weather meet regulatory dispatch minimums, and execute a formal dispatch release amendment.
If actual fuel at Redispatch Point X is less than the planned minimum redispatch fuel, or if destination weather deteriorates below landing minimums, the aircraft must follow the valid original plan or another properly authorized safe amendment.
Redispatching saves thousands of pounds of fuel on long-haul routes by reducing takeoff weight and induced drag, directly increasing commercial cargo and passenger payload capacity.
Last updated: October 2026
Redispatch and En Route Re-release Procedures
Quick Summary: En route redispatch (also known in industry parlance as re-release or reclearance) is an operational flight planning technique utilized primarily on long-haul Part 121 Flag flights. Under standard Flag rules (14 CFR 121.645), an aircraft must carry 10% of total en route flight time as contingency reserve. On a 12-to-15-hour intercontinental flight, this 10% reserve alone represents tens of thousands of pounds of fuel. Redispatching solves this economic penalty by legally releasing the flight to an intermediate destination, and then re-releasing it en route from an intermediate fix to the final destination—thereby calculating the 10% reserve only over the final en route segment.
1. The Long-Haul Fuel Dilemma: Why Redispatch Exists
Under 14 CFR 121.645(b)(2) , every turbine Flag flight must carry fuel to fly for 10% of the total time required to fly from departure to destination. Consider the operational implications of this mandate on modern ultra-long-haul intercontinental routes:
A 14-Hour Transpacific Mission: On a flight from San Francisco (KSFO) to Tokyo Narita (RJAA) or Los Angeles (KLAX) to Sydney (YSSY) scheduled for 14 hours (840 minutes), the 10% reserve requires carrying fuel for an additional 84 minutes of flight at cruise fuel flow .
The Weight Penalty: For a widebody aircraft such as a Boeing 777-300ER or Airbus A350-900 burning 15,000 lbs/hr, 84 minutes of reserve fuel weighs 21,000 lbs (nearly 10 metric tons).
The Cost-to-Carry Compounding Effect: Transporting that extra 21,000 lbs across the Pacific requires burning an additional 3.0% to 3.5% of its weight per hour. Over 14 hours, carrying the reserve fuel burns an extra 8,000 to 10,000 lbs of jet fuel just to transport the reserve itself!
Payload Displacement: When gross takeoff weight approaches Maximum Takeoff Weight (MTOW) or Maximum Landing Weight (MLW), this dead-weight reserve fuel directly displaces paying passengers, baggage, and high-yield commercial cargo.
To eliminate this inefficiency while maintaining strict compliance with federal safety regulations, air carriers utilize Redispatch / Re-release Procedures authorized under FAA-approved Operations Specifications.
2. The Four-Point Redispatch Architecture
A redispatch flight plan is constructed around four distinct geographic coordinates and two separate legal release profiles:
Loading diagram...
The Four Architectural Points
Origin Departure Airport (DEP): Where the flight commences.
Initial Destination (Airport A): An intermediate, geographically closer airport along or adjacent to the planned route (e.g., Anchorage PANC on a transpacific route from California to Asia, or Shannon EINN on a transatlantic route from the Midwest to Europe). Airport A must have a designated alternate (Alternate A).
Redispatch Point (Fix X): An en route navigation fix or waypoint along the flight path, strategically positioned prior to Airport A . Point X is the legal decision point.
Final Intended Destination (Airport B): The true commercial destination (e.g., Tokyo Narita RJAA) with its designated alternate (Alternate B).
3. Two Legal Fuel Plans Must Be Satisfied
Prepare an original legal dispatch to initial destination A , including its applicable alternate and reserve requirements. Separately prepare the proposed re-release from point X to final destination B , with its required alternates, reserves, aircraft status, and authority. The airplane must have enough fuel to complete the original plan if the re-release cannot be made.
At departure, takeoff fuel must be at least the greater of the original A-plan requirement and the fuel to X plus the minimum required at X for the proposed B plan. Taxi and other required allowances are added on their proper basis. Comparing only the B branch can produce an illegal original release.
The enroute release change is governed by the applicable approved procedure and § 121.631, with PIC–dispatcher coordination under § 121.535. Re-release does not waive ETOPS, aircraft limitations, destination/alternate weather, or the carrier's fuel authorization. At X, use actual remaining fuel and updated conditions rather than the original prediction alone.
4. Inflight Re-release Workflow & Joint Operational Control
As the aircraft cruises toward Redispatch Point X, the dispatcher and flight crew execute a formalized decision workflow. This evaluation typically occurs 1 to 2 hours prior to reaching Point X :
Loading diagram...
Step-by-Step Re-release Criteria
Weather Re-evaluation at Destination B: The dispatcher must evaluate fresh METARs, TAFs, and SIGMETs for Destination B and Alternate B. Both airports must meet full regulatory dispatch minimums at the time of redispatch. Weather minimums are judged as if the flight were taking off brand-new from Point X.
Actual Fuel Verification at Point X: The flight crew checks actual Fuel on Board (FOB). The projected fuel upon crossing Point X must equal or exceed the Minimum Required Fuel at X specified on the redispatch release.
Aircraft System Status: The crew verifies that no en route system failures (e.g., generator failure, engine bleed malfunction, FMC degradation) have occurred that would degrade ETOPS status or Category II/III autoland capability required at Destination B.
Formal Dispatch Release Amendment: Under 14 CFR 121.535 and 121.687, the dispatcher generates an official release amendment stating: "Flight 851 is re-released at waypoint CANAC to Tokyo Narita RJAA, alternate Haneda RJTT, minimum fuel required at CANAC is 82,400 lbs."
Mutual Agreement (PIC Concurrence): The PIC reviews the amendment, verifies fuel and weather, and sends an electronic signature or verbal confirmation. Both parties must be in full agreement.
ATC Reclearance: The crew obtains any ATC amendment actually required for the route or flight-plan change; company re-release does not always change an ATC plan already filed to B.
The Diversion Trigger: If actual fuel at Point X is even 100 lbs below the required redispatch fuel, or if Destination B weather drops below minimums, the re-release CANNOT legally be executed . The aircraft continues on its original clearance and lands at intermediate Airport A .
5. Worked Two-Branch Calculation
This is a fictional constant-flow teaching model, not performance data for a named aircraft or route. Origin-to-X time is 390 minutes at 250 lb/min; X-to-B time is 240 minutes at the same rate. B-alternate fuel is 5,000 lb and holding fuel is 5,500 lb. The separately checked original A plan requires 480 minutes trip fuel, a 48-minute ten-percent component, 5,000 lb alternate fuel, and 5,500 lb holding.
Original A-plan minimum: (480 × 250) + (48 × 250) + 5,000 + 5,500 = 142,500 lb .
At-X B-plan minimum: (240 × 250) + (24 × 250) + 5,000 + 5,500 = 76,500 lb .
Origin-to-X burn: 390 × 250 = 97,500 lb .
Origin fuel for the B branch: 97,500 + 76,500 = 174,000 lb .
Takeoff fuel before other applicable allowances: max(142,500, 174,000) = 174,000 lb .
A direct B plan under the same constant-flow assumptions uses (630 × 250) + (63 × 250) + 5,000 + 5,500 = 183,750 lb . The difference is 9,750 lb less fuel loaded in this simplified comparison . It is not 9,750 lb of fuel consumed savings. Do not add an unsupported burn-to-carry estimate to it and claim a larger payload gain. Actual dispatch modeling must iterate weight-dependent burns, both branches, limitations, and all other required fuel.
At X, 174,000 − 97,500 = 76,500 lb , exactly the stated B minimum with no extra margin. If actual burn is higher, reassess before re-release. Without a legal safe amendment to B, retain the valid original plan or coordinate another lawful safe plan; the original A plan cannot simply be discarded.
6. Procedural & Documentation Integrity
Because redispatching involves legal authorization while airborne, regulatory record-keeping is governed by strict compliance mandates:
Release Amendment Record (§ 121.631 / § 121.695): The carrier must retain a complete copy of the original dispatch release, the en route weather briefing, and the signed electronic release amendment for at least 3 months .
Datalink Timestamping: Record the amendment and PIC concurrence under the approved carrier procedures, preserving the relevant time, flight identity, destination/alternate changes, and fuel decision.
Oceanic Air Traffic Coordination: When re-release is executed, the crew coordinates with Oceanic Control to update the flight's ultimate destination in international ATC flight plan records.
7. Practical Traps & Operational Pitfalls
Passing Point X Without Formal Re-release: If an aircraft flies past Redispatch Point X without receiving and acknowledging the formal amended dispatch release from the dispatcher, it is operating in violation of 14 CFR 121.535 and 121.645. The flight is legally dispatched only to Airport A; flying toward Destination B without a valid release constitutes unauthorized operation. The crew must divert to Airport A.
Evaluating Destination Weather at Origin Instead of En Route: Weather at Destination B and Alternate B must be evaluated using fresh, updated forecasts at the time of redispatch. If conditions at Destination B have deteriorated below landing minimums while the flight was en route, the re-release cannot be issued, even if weather was forecast to be pristine when the aircraft took off 6 hours earlier.
Applying the 10% Reserve to Total Flight Time: When computing fuel required from Point X to Destination B, the 10% time reserve is applied strictly to the flight time from Point X to Destination B . Applying 10% to the total time from origin defeats the primary economic purpose of redispatch.
Official References
Source check: 2026-10-12 . Part 121 dispatch, fuel, and amendment rules ; FAA AIM clearances and priority . For operational use, apply current issued authorizations and the assigned aircraft’s approved data.