Study guide

7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins

FAA Aviation Mechanic — Airframe AMA

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Strategy

1.1 Exam Structure, Eligibility & 14 CFR Part 65 Requirements 1.2 Study Strategy, Blueprint Weighting & Core Formulas

2 Chapter 2: Metallic Structures & Sheet Metal Repair

2.1 Aluminum Alloys, Heat Treatment & Rivet Identification 2.2 Rivet Layout, Edge Distance, Spacing & Driving Standards 2.3 Sheet Metal Layout: Bend Allowance, Setback & Forming 2.4 Sheet Metal Inspection, Damage Evaluation & Flush/Lap Repairs

3 Chapter 3: Non-Metallic Structures: Composites, Wood, Fabric & Transparent Plastics

3.1 Advanced Composites: Fiber Types, Resin Matrices & Core Materials 3.2 Composite Damage Assessment, Repair Methods & Shop Safety 3.3 Aircraft Wood Structures: Defects, Allowable Repairs & Gluing 3.4 Aircraft Fabric Covering, Inspection & Doping/Finishing Processes 3.5 Transparent Plastics, Windows, Windshields & Cabin Interiors

4 Chapter 4: Welding & Structural Fasteners

4.1 Oxyacetylene & Electric Arc Welding Principles for Aviation 4.2 Tubular Steel Fuselage Inspection, Defect Types & Approved Repairs 4.3 Special Structural Fasteners, Blind Rivets & Precision Hardware

5 Chapter 5: Flight Controls, Assembly & Rigging

5.1 Primary and Secondary Flight Control Surfaces & Aerodynamics 5.2 Control Cables, Tensiometers & Temperature-Compensated Rigging 5.3 Turnbuckles, Cable Safetying, Pulleys & Fairleads 5.4 Control Surface Travel, Mass Balancing & Flutter Prevention

6 Chapter 6: Hydraulic & Pneumatic Power Systems

6.1 Hydraulic Fluids, Seal Materials & Contamination Control 6.2 Hydraulic Reservoirs, Power Pumps & Accumulators 6.3 Hydraulic Valves: Pressure, Flow & Directional Control 6.4 High-Pressure Pneumatic Systems, Air Compressors & Moisture Control

7 Chapter 7: Aircraft Landing Gear Systems

7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins 7.2 Retraction Mechanisms, Down-Locks, Alignment & Torque Links 7.3 Aircraft Brakes, Multi-Disc Systems & Anti-Skid Operations 7.4 Aircraft Tires, Wheels, Bearings & Emergency Extension Systems

8 Chapter 8: Aircraft Fuel Systems

8.1 Fuel Tank Types: Rigid, Bladder & Integral (Wet Wing) Tanks 8.2 Fuel System Plumbing: Boost Pumps, Selector Valves & Filtration 8.3 Crossfeed, Fuel Jettison, Fuel Quantity Indication & Probes 8.4 Fuel System Maintenance, Defueling & Tank Confined-Space Safety

9 Chapter 9: Airframe Electrical Systems

9.1 AC & DC Power Generation: Alternators, Inverters & TRUs 9.2 Aircraft Electrical Distribution, Bus Architecture & Circuit Protection 9.3 Aircraft Wire Selection (MIL-W-5086 / MIL-W-22759), Sizing & Bundling 9.4 Bonding, Grounding, Static Dischargers & Electrical Troubleshooting

10 Chapter 10: Cabin Atmosphere & Environmental Control

10.1 Vapor-Cycle & Air-Cycle Machine (ACM) Refrigeration Systems 10.2 Cabin Pressurization: Outflow Valves, Safety Valves & Regulators 10.3 Heating Systems: Combustion Heaters, Exhaust Muffs & Bleed Air 10.4 Aircraft Oxygen Systems: Continuous-Flow, Diluter-Demand & Generators

11 Chapter 11: Aircraft Instrument Systems

11.1 Pitot-Static Systems: Altimeter, VSI, Airspeed & Error Diagnosis 11.2 Gyroscopic Flight Instruments: Rigidity, Precession & Power Sources 11.3 Engine & System Instruments: Bourdon Tubes, Synchros & EICAS 11.4 Instrument Installation, Magnetic Compass Swing & Regulatory Inspections

12 Chapter 12: Communication, Navigation & Warning Systems

12.1 VHF/HF Communications, Antennas & Coaxial Cable Installation 12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar 12.3 Transponders, Altitude Encoders & Emergency Locator Transmitters 12.4 Position & Warning Systems: Landing Gear Horns, Stall & Warning

13 Chapter 13: Ice, Rain & Fire Protection Systems

13.1 Ice Detection, Pneumatic Deice Boots & Electrothermal Systems 13.2 Wing & Cowl Thermal Bleed-Air Anti-Ice Systems & Rain Removal 13.3 Fire & Smoke Detection: Spot Detectors, Continuous Loops & Optical Sensors 13.4 Fire Extinguishing Systems: HRD Containers, Squibs & Two-Shot Architecture

14 Chapter 14: Airframe Inspection & Maintenance Regulations

14.1 14 CFR Part 43 Appendix D: Scope of 100-Hour & Annual Inspections 14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations 14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules 14.4 Airframe Corrosion Identification, Treatment, Chemical Conversion & NDT

15 Chapter 15: Rotorcraft Fundamentals

15.1 Rotorcraft Aerodynamics, Rotor System Classifications & Flight Controls 15.2 Rotor Blades, Transmissions, Drive Systems & Skid Landing Gear Inspection 15.3 Rotor Track & Balance, Vibration Diagnosis & Helicopter Ground Safety

16 Chapter 16: Water & Waste Systems

16.1 Potable Water Systems: Components, Operation, Servicing & Sanitizing 16.2 Lavatory Waste Systems: Vacuum & Recirculating Types, Servicing & Safety

7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins

Key Takeaways Explain This Topic AI

Oleo-pneumatic shock struts combine incompressible hydraulic fluid (MIL-PRF-5606 mineral-base oil) to dissipate high-energy landing impacts via viscous orifice friction, and compressible dry nitrogen gas to cushion ground taxi vibrations and support aircraft static weight.

The internal anatomy consists of an upper cylinder, lower telescoping piston, tapered metering pin that dynamically reduces orifice flow area during compression to maintain uniform deceleration, a snubbing chamber with rebound check valves to prevent rapid oscillation, and external torque links to maintain wheel alignment and limit extension.

Servicing an oleo strut safely requires complete gas depressurization through the MS28889-1 charging valve before loosening the valve core or gland nut, fully collapsing the strut on jacks, filling with fluid to the filler plug threads, and inflating with dry nitrogen to the exact exposed piston chrome dimension specified on the aircraft data plate.

Strut diagnostics: bottoming out on touchdown indicates low hydraulic fluid; a harsh, rigid ride during taxiing indicates low nitrogen pressure or overfilled fluid; oil weeping at the lower gland indicates worn dynamic chevron packings or scored piston chrome.

Last updated: August 2026

7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins

FAA Airframe Exam Focus: Landing gear shock struts are critical structural assemblies engineered to dissipate the violent impact kinetic energy of touchdown and cushion the airframe against ground taxi shocks. Aviation maintenance technicians must master the thermodynamic and fluid mechanics of oleo struts, internal metering pin dynamics, snubbing rebound control, torque link alignment geometry, strict safety depressurization protocols, and precise dimension-based nitrogen charging.

1. Physics of Shock Absorption: Pneumatics vs. Hydraulics

Aircraft landing gear systems employ various shock absorption methods ranging from simple spring-steel leaf struts and elastomeric bungee cords on light general aviation aircraft to sophisticated air-oil (oleo-pneumatic) shock struts on high-performance and transport category aircraft. An oleo strut relies on the combined physical properties of a liquid and a gas operating within a dual-chamber cylinder. OLEO STRUT SHOCK DISSIPATION PHYSICS

  • TOUCHDOWN IMPACT (High Velocity) GROUND TAXI & STATIC LOAD
  • ──────────────────────────────── ─────────────────────────
  • Kinetic Energy (½mv²) Aircraft Gross Weight
  • │ │
  • ▼ ▼
  • Hydraulic Fluid Forced Compressed Nitrogen Gas
  • Through Metering Orifice Acts as Pneumatic Spring
  • │ │
  • ▼ ▼
  • VISCOUS FLUID FRICTION ELASTIC CUSHIONING
  • Converts Energy into HEAT Absorbs Taxi Bumps & Dips
  • (Dissipated through strut walls) (Boyle's Law: P₁V₁ = P₂V₂)
  • The Dual-Medium Principle

Hydraulic Fluid (Viscous Kinetic Dissipation):

Hydraulic fluid (standard MIL-PRF-5606 mineral-base petroleum oil, dyed red, or MIL-PRF-83282 fire-resistant synthetic hydrocarbon) is virtually incompressible .

During touchdown impact, the landing sink velocity forces the lower telescoping piston upward into the upper cylinder. This drives the hydraulic fluid through a restricted internal orifice at high velocity.

Fluid shear friction and turbulence convert the aircraft's downward kinetic energy ( E k = 1 2 m v 2 E_k = \frac{1}{2} m v^2 E k ​ = 2 1 ​ m v 2 ) into thermal energy (heat) , which is rapidly absorbed by the fluid mass and dissipated into the surrounding atmosphere through the high-strength alloy steel or aluminum strut cylinder walls.

The hydraulic fluid acts as a true shock absorber (dissipator), preventing the aircraft from bouncing back into the air upon ground contact.

Dry Nitrogen Gas (Pneumatic Springing & Cushioning):

The upper portion of the strut cylinder contains a sealed chamber charged with high-pressure dry nitrogen gas (operating pressures typically range from 500 to 1 , 800 psi 500\text{ to }1,800\text{ psi} 500 to 1 , 800 psi depending on aircraft gross weight).

Nitrogen gas is highly compressible obeying Boyle's Ideal Gas Law: P 1 V 1 = P 2 V 2 P_1 V_1 = P_2 V_2 P 1 ​ V 1 ​ = P 2 ​ V 2 ​

As the strut compresses, the gas volume ( V V V ) decreases and internal pressure ( P P P ) rises progressively, creating an elastic pneumatic spring.

During ground taxiing, surface bumps, turns, and braking maneuvers, fluid flows freely through the orifice under low velocity without generating significant damping resistance; instead, the compressed nitrogen cushion compresses and expands smoothly to isolate the airframe from runway roughness.

Fluid vs. Gas Comparison in Oleo Struts

  • Operational Parameter Hydraulic Fluid (MIL-PRF-5606 / 83282) Dry Nitrogen Gas ( N 2 N_2 N 2 ​ )
  • Physical State Incompressible liquid Highly compressible inert gas
  • Primary Role Dissipates landing impact energy (damping) Cushions ground taxi loads and supports static weight

Energy Transformation Converts kinetic energy to thermal energy (heat) Stores and releases potential energy (pneumatic spring)

Operational Domain High-velocity compression stroke (touchdown) Low-velocity cyclic displacement (taxiing & roll)

Servicing Metric Fluid level filled to filler port with strut collapsed Piston extension dimension (inches of exposed chrome)

2. Oleo Strut Anatomy & Internal Construction

An aircraft oleo-pneumatic strut is a precision-machined dual-telescoping cylinder engineered to withstand immense axial landing loads, side loads, and torsional twisting moments. OLEO STRUT INTERNAL ANATOMY

  • ┌───────────────────────┐
  • │ Air/Oil Charge Valve │ ◄── MS28889-1 High-Pressure
  • │ (Schrader Valve) │ Schrader Valve
  • ├───────────────────────┤
  • │ │
  • │ NITROGEN │ ◄── Upper Gas Chamber
  • │ CHAMBER │ (Pneumatic Spring)
  • │ │
  • ├───────────────────────┤
  • │ HYDRAULIC FLUID │ ◄── Upper Fluid Reservoir
  • │ RESERVOIR │
  • ├───────┐ ┌───────┤
  • │ ████ │ │ ████ │ ◄── Orifice Plate
  • │ ████ │ │ ████ │
  • │ ████ │ ┌───┐ │ ████ │ ◄── Snubbing / Rebound Valve
  • │ │ │ │ │ │ (Flapper / Check Orifices)
  • │ │ │ █ │ │ │
  • │ │ │ █ │ │ │ ◄── Tapered Metering Pin
  • │ │ │ █ │ │ │ (Modulates flow area ΔA)
  • ├───────┴─┘ █ └─┴───────┤
  • │ █ │
  • │ LOWER PISTON │ ◄── Lower Cylinder / Piston Tube
  • │ (Fluid Chamber) │ (Chrome-plated alloy steel)
  • ├───────────────────────┤
  • Upper Torque ──► │ ╲ ╱ │
  • Link Arm │ ╲ ╱ │ ◄── Torque Links (Scissor Links)
  • │ ●───────────────● │ • Prevents piston rotation
  • Lower Torque ──► │ ╱ ╲ │ • Maintains wheel alignment
  • Link Arm │ ╱ ╲ │ • Limits maximum strut extension
  • ├───────────────────────┤
  • │ Wiper / Scraper │ ◄── Metallic scraper & felt wiper
  • │ Packing Gland │ (Chevron V-ring pressure seals)
  • ├───────────────────────┤
  • │ WHEEL AXLE │ ◄── Axle Spindle to Main Wheels
  • └───────────────────────┘
  • Detailed Component Functions

Upper Cylinder (Housing):

Attached rigidly or via trunnion bearings to the aircraft wing spar or fuselage carry-through structure.

Contains the internal fluid reservoir, the high-pressure gas chamber, and houses the fixed orifice plate.

Lower Piston / Cylinder:

Telescopes smoothly inside the upper cylinder bore. The outer surface is precision-ground and hard-chrome plated to resist corrosion and minimize friction against dynamic packings.

Fixed to the wheel axle assembly at its lower end.

Tapered Metering Pin:

A precision-tapered alloy steel rod mounted upright on the bottom of the lower piston that extends through the center of the orifice plate.

Operating Principle: As the strut compresses during landing, the tapered pin enters the orifice. Because the pin diameter increases toward its base, the available fluid flow area ( Δ A \Delta A Δ A ) through the orifice is progressively constricted.

This restriction increases hydraulic resistance in direct proportion to stroke travel, compensating for the decay in aircraft sink rate and providing a constant, uniform deceleration rate throughout the entire compression stroke without structural shock spikes.

Orifice Plate and Snubbing (Rebound) Chamber:

Positioned between the lower piston tube and upper cylinder.

Contains a large central orifice for the metering pin and several auxiliary snubbing holes controlled by a spring-loaded ring or flapper check valve .

Rebound Control: When the strut reaches maximum compression and begins to extend (rebound) under nitrogen pressure, the flapper valve closes immediately. This traps fluid in the upper snubbing chamber and forces it to return to the lower cylinder exclusively through small snubbing bleed holes.

This hydraulic restriction dampens the extension stroke, preventing violent rebound oscillation, strut topping impact, and dangerous aircraft 'porpoising' on rollout.

Torque Links (Scissor Links):

A heavy-duty two-piece hinged mechanical scissor assembly connecting the outer upper cylinder to the lower moving piston tube.

Dual Primary Functions:

Directional Alignment: Prevents the cylindrical lower piston from rotating inside the upper housing, keeping the wheel axle and tires perfectly aligned with the aircraft longitudinal axis.

Extension Limiter (Downstop): Acts as a structural mechanical stop that prevents the lower piston from over-extending and separating from the upper cylinder when the aircraft becomes airborne.

Packing Gland, Wiper Ring & Scraper Seal:

Located in the lower bearing gland of the upper cylinder.

Contains a set of pressure-energized V-ring (chevron) packings or elastomeric U-cup seals with Teflon backup rings to retain high-pressure fluid and gas.

An external metallic (beryllium copper or stainless steel) scraper ring and felt wiper ring scrape away runway ice, abrasive grit, and mud from the extending chrome piston before it can penetrate and destroy the internal packings.

3. Oleo Strut Servicing Protocols & Safety Precautions

Servicing an aircraft oleo strut involves two distinct, sequential operations: hydraulic fluid charging and high-pressure nitrogen gas inflation . Failure to follow exact manufacturer procedures can result in severe airframe damage or fatal maintenance accidents. OLEO STRUT SERVICING SEQUENCE

  • STEP 1: DEPRESSURIZE STEP 2: FLUID SERVICE STEP 3: NITROGEN INFLATE
  • ──────────────────── ───────────────────── ────────────────────────
  • Jack aircraft / support • Fully collapse strut • Lower aircraft to ground
  • Open MS28889-1 valve • Remove valve core • Connect dry nitrogen bottle
  • BLEED ALL GAS TO ZERO • Fill MIL-PRF-5606 to level • Inflate to data plate
  • Confirm 0 psi before core • Cycle/bleed air bubbles EXTENSION DIMENSION

Caution

FATAL HIGH-PRESSURE HAZARD: An oleo shock strut contains compressed nitrogen at pressures up to 1 , 800 psi 1,800\text{ psi} 1 , 800 psi . Never attempt to loosen the air valve body, valve core, or lower cylinder gland nut until ALL nitrogen gas pressure has been completely released and verified at zero gauge pressure. Always position yourself away from the direct projectile path of the valve stem.

Hydraulic Fluid Servicing Procedure (Step-by-Step)

Aircraft Preparation: Place the aircraft on maintenance jacks in a level hangar environment, or relieve structural weight from the landing gear per the Aircraft Maintenance Manual (AMM).

Complete Depressurization:

Remove the high-pressure valve cap from the MS28889-1 high-pressure charging valve.

Depress the valve core stem using an approved deflator cap with a bleed hose routed into a collection container until all gas pressure has completely escaped.

Slowly loosen the valve swivel hex nut to ensure no residual trapped pressure remains before backing out the valve core or body.

Strut Collapse: Fully compress (collapse) the lower piston until it reaches the absolute bottom of its stroke.

Fluid Fill:

Remove the fluid filler plug / valve assembly.

Pour clean, fresh, certified MIL-PRF-5606 (mineral base) or MIL-PRF-83282 (synthetic PAO base) hydraulic fluid into the filler opening until fluid reaches the bottom of the filler port threads.

Air Bleeding (Burping):

Slowly extend and compress the strut through its full stroke multiple times (exercising the piston) to dislodge trapped air pockets from beneath the orifice plate and snubbing chamber.

Recheck fluid level with the strut fully collapsed; top off fluid until it remains flush with the filler opening.

Reassembly: Install the charging valve assembly utilizing a new MS28775 / AS568 O-ring preformed packing and torque the valve body to the AMM specification.

Nitrogen Gas Inflation Procedure

Aircraft Configuration: Lower the aircraft off jacks so that the landing gear supports the normal static gross weight of the aircraft (fuel tanks at specified level, cabin empty, aircraft parked on level ground).

Dry Nitrogen Source: Connect a certified high-pressure dry nitrogen ( N 2 N_2 N 2 ​ ) cylinder equipped with a calibrated two-stage pressure regulator, shutoff valve, and high-pressure charging chuck.

Inflation by Extension Measurement:

Inflate the strut slowly with dry nitrogen.

Observe the polished chrome lower piston rod as it extends from the upper cylinder gland.

Critical Rule: Inflate the strut until the exposed chrome piston length matches the exact dimension specified on the aircraft landing gear instruction data plate (e.g., 3.50 ± 0.25 inches 3.50 \pm 0.25\text{ inches} 3.50 ± 0.25 inches on a light twin; 6.00 ± 0.50 inches 6.00 \pm 0.50\text{ inches} 6.00 ± 0.50 inches on a business jet). WHY EXTENSION DIMENSION OVERRULES PSI

Measured in INCHES of exposed chrome piston (NOT psi alone)

  • ┌───────────────────────────┐
  • │ Upper Cylinder │
  • ├───────────────────────────┤
  • │ │
  • │ ╔═════════════════════╗ │
  • │ ║ ║ │
  • │ ║ Exposed Chrome ║ ◄┼── Measured with precision scale
  • │ ║ Dimension ║ │ (e.g., 4.0 inches per AMM)
  • │ ║ (e.g. 4.00 in) ║ │
  • │ ╚═════════════════════╝ │
  • ├───────────────────────────┤
  • │ Wheel Hub │
  • └───────────────────────────┘

Important

Why Struts Are Inflated by Dimension, Not Pressure Alone: Static inflation pressure varies drastically with ambient temperature ( P 1 / T 1 = P 2 / T 2 P_1/T_1 = P_2/T_2 P 1 ​ / T 1 ​ = P 2 ​ / T 2 ​ ) and aircraft gross weight (fuel load, passenger cargo). Servicing to a fixed pressure reading (psi) would result in incorrect strut geometry. Inflating to the specified exposed piston dimension (inches) guarantees the correct internal gas volume and proper operating stroke travel under existing conditions.

4. Oleo Strut Troubleshooting & Failure Analysis

Airframe technicians must quickly isolate whether an oleo strut defect stems from incorrect fluid level, improper gas charge, mechanical binding, or damaged dynamic packings. OLEO STRUT DIAGNOSTIC MATRIX

  • ┌─────────────────────────────────┐
  • │ OBSERVED STRUT DEFECT │
  • └────────────────┬────────────────┘
  • │
  • ┌─────────────────────────┼─────────────────────────┐
  • ▼ ▼ ▼
  • Bottoms out on Harsh / Rigid Oil Weeping
  • Touchdown Impact Taxi Ride at Lower Gland
  • (Normal ramp height) (Strut collapsed) (Piston wet)
  • │ │ │
  • ▼ ▼ ▼
  • LOW HYDRAULIC LOW NITROGEN WORN CHEVRON
  • FLUID LEVEL GAS CHARGE PACKINGS
  • (Insufficient oil (Riding on bumper; (Replace dynamic
  • for kinetic damping) needs N₂ charging) seals & scraper)
  • Comprehensive Strut Troubleshooting Guide

Fault Symptom Probable Root Cause Detailed Diagnostic Mechanism Required Corrective Action

Strut bottoms out with severe metallic thud on landing impact, yet extends to normal height on ramp Low hydraulic fluid level (Gas charge normal) Without sufficient fluid, the lower piston compresses through an empty air pocket. The metering pin cannot force fluid through the orifice to dissipate kinetic energy; the strut slams against its internal bottoming bumper. Deflate gas completely, fully collapse strut, service hydraulic fluid to filler port level, bleed air, and re-inflate with nitrogen.

Extremely harsh, rigid ride during ground taxiing; strut remains near bottom of stroke Low nitrogen gas pressure Inadequate gas pre-charge cannot support aircraft static weight. The strut rides fully compressed against mechanical bump stops, eliminating the pneumatic cushion. Inspect air valve for leaks with soapy water solution. Inflate with dry nitrogen to specified exposed chrome dimension.

Strut remains fully extended; refuses to compress during normal ground operations Excessive nitrogen gas pressure or mechanical binding Over-pressurization locks the strut at maximum stroke. Alternatively, bent torque link arms, seized scissor pivot bolts, or a scored/bent piston tube cause mechanical jamming. Check torque link alignment and free movement. Bleed excess nitrogen until exposed piston matches data plate dimension.

Continuous hydraulic fluid leakage past lower cylinder wiper gland Worn dynamic V-ring (chevron) packings or scored piston chrome Particulate contamination, ice damage, or worn wiper rings allow grit to abrade the chrome piston and cut the rubber chevron seal lips, compromising the high-pressure seal gland. Disassemble strut lower gland, polish or replace chrome piston tube, install new dynamic chevron packing kit and scraper rings.

Sluggish, jerky extension stroke during landing gear extension in flight Air entrained in hydraulic fluid or dry upper bearing Aerated fluid creates foaming and cavitation across the snubbing orifices; unlubricated bearing surfaces increase mechanical stiction. Cycle strut to bleed entrained air; lubricate torque link grease fittings (zerk fittings) with MIL-PRF-81322 grease.