Study guide
14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations
FAA Aviation Mechanic — Airframe AMA
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Strategy
1.1 Exam Structure, Eligibility & 14 CFR Part 65 Requirements 1.2 Study Strategy, Blueprint Weighting & Core Formulas
2 Chapter 2: Metallic Structures & Sheet Metal Repair
2.1 Aluminum Alloys, Heat Treatment & Rivet Identification 2.2 Rivet Layout, Edge Distance, Spacing & Driving Standards 2.3 Sheet Metal Layout: Bend Allowance, Setback & Forming 2.4 Sheet Metal Inspection, Damage Evaluation & Flush/Lap Repairs
3 Chapter 3: Non-Metallic Structures: Composites, Wood, Fabric & Transparent Plastics
3.1 Advanced Composites: Fiber Types, Resin Matrices & Core Materials 3.2 Composite Damage Assessment, Repair Methods & Shop Safety 3.3 Aircraft Wood Structures: Defects, Allowable Repairs & Gluing 3.4 Aircraft Fabric Covering, Inspection & Doping/Finishing Processes 3.5 Transparent Plastics, Windows, Windshields & Cabin Interiors
4 Chapter 4: Welding & Structural Fasteners
4.1 Oxyacetylene & Electric Arc Welding Principles for Aviation 4.2 Tubular Steel Fuselage Inspection, Defect Types & Approved Repairs 4.3 Special Structural Fasteners, Blind Rivets & Precision Hardware
5 Chapter 5: Flight Controls, Assembly & Rigging
5.1 Primary and Secondary Flight Control Surfaces & Aerodynamics 5.2 Control Cables, Tensiometers & Temperature-Compensated Rigging 5.3 Turnbuckles, Cable Safetying, Pulleys & Fairleads 5.4 Control Surface Travel, Mass Balancing & Flutter Prevention
6 Chapter 6: Hydraulic & Pneumatic Power Systems
6.1 Hydraulic Fluids, Seal Materials & Contamination Control 6.2 Hydraulic Reservoirs, Power Pumps & Accumulators 6.3 Hydraulic Valves: Pressure, Flow & Directional Control 6.4 High-Pressure Pneumatic Systems, Air Compressors & Moisture Control
7 Chapter 7: Aircraft Landing Gear Systems
7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins 7.2 Retraction Mechanisms, Down-Locks, Alignment & Torque Links 7.3 Aircraft Brakes, Multi-Disc Systems & Anti-Skid Operations 7.4 Aircraft Tires, Wheels, Bearings & Emergency Extension Systems
8 Chapter 8: Aircraft Fuel Systems
8.1 Fuel Tank Types: Rigid, Bladder & Integral (Wet Wing) Tanks 8.2 Fuel System Plumbing: Boost Pumps, Selector Valves & Filtration 8.3 Crossfeed, Fuel Jettison, Fuel Quantity Indication & Probes 8.4 Fuel System Maintenance, Defueling & Tank Confined-Space Safety
9 Chapter 9: Airframe Electrical Systems
9.1 AC & DC Power Generation: Alternators, Inverters & TRUs 9.2 Aircraft Electrical Distribution, Bus Architecture & Circuit Protection 9.3 Aircraft Wire Selection (MIL-W-5086 / MIL-W-22759), Sizing & Bundling 9.4 Bonding, Grounding, Static Dischargers & Electrical Troubleshooting
10 Chapter 10: Cabin Atmosphere & Environmental Control
10.1 Vapor-Cycle & Air-Cycle Machine (ACM) Refrigeration Systems 10.2 Cabin Pressurization: Outflow Valves, Safety Valves & Regulators 10.3 Heating Systems: Combustion Heaters, Exhaust Muffs & Bleed Air 10.4 Aircraft Oxygen Systems: Continuous-Flow, Diluter-Demand & Generators
11 Chapter 11: Aircraft Instrument Systems
11.1 Pitot-Static Systems: Altimeter, VSI, Airspeed & Error Diagnosis 11.2 Gyroscopic Flight Instruments: Rigidity, Precession & Power Sources 11.3 Engine & System Instruments: Bourdon Tubes, Synchros & EICAS 11.4 Instrument Installation, Magnetic Compass Swing & Regulatory Inspections
12 Chapter 12: Communication, Navigation & Warning Systems
12.1 VHF/HF Communications, Antennas & Coaxial Cable Installation 12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar 12.3 Transponders, Altitude Encoders & Emergency Locator Transmitters 12.4 Position & Warning Systems: Landing Gear Horns, Stall & Warning
13 Chapter 13: Ice, Rain & Fire Protection Systems
13.1 Ice Detection, Pneumatic Deice Boots & Electrothermal Systems 13.2 Wing & Cowl Thermal Bleed-Air Anti-Ice Systems & Rain Removal 13.3 Fire & Smoke Detection: Spot Detectors, Continuous Loops & Optical Sensors 13.4 Fire Extinguishing Systems: HRD Containers, Squibs & Two-Shot Architecture
14 Chapter 14: Airframe Inspection & Maintenance Regulations
14.1 14 CFR Part 43 Appendix D: Scope of 100-Hour & Annual Inspections 14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations 14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules 14.4 Airframe Corrosion Identification, Treatment, Chemical Conversion & NDT
15 Chapter 15: Rotorcraft Fundamentals
15.1 Rotorcraft Aerodynamics, Rotor System Classifications & Flight Controls 15.2 Rotor Blades, Transmissions, Drive Systems & Skid Landing Gear Inspection 15.3 Rotor Track & Balance, Vibration Diagnosis & Helicopter Ground Safety
16 Chapter 16: Water & Waste Systems
16.1 Potable Water Systems: Components, Operation, Servicing & Sanitizing 16.2 Lavatory Waste Systems: Vacuum & Recirculating Types, Servicing & Safety
14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations
Key Takeaways Explain This Topic AI
Airworthiness Directives (ADs) are legally binding federal regulations issued under 14 CFR Part 39 to correct unsafe conditions in aircraft, engines, propellers, or appliances; compliance is mandatory under federal law.
ADs are categorized into Emergency ADs (often requiring compliance before further flight or within a very short time), Standard/Biweekly ADs, One-Time compliance ADs, and Recurring/Repetitive ADs.
An alternative method of compliance (AMOC) may be used only if the manager of the FAA office identified in the AD approves it (14 CFR §39.19); proposals normally go through the principal inspector.
Manufacturer Service Bulletins (SBs) are advisory and not mandatory for Part 91 operators unless specifically incorporated by reference in an FAA Airworthiness Directive or mandated by Part 121/135 OpSpecs.
14 CFR Part 43 Appendix A establishes legal criteria distinguishing Major Repairs and Major Alterations (requiring approved data and FAA Form 337) from Minor Repairs and Minor Alterations.
Last updated: October 2026
14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations
FAA Airframe Subject Matter Focus: Aviation maintenance technicians bear strict legal responsibility for verifying that aircraft conform to type design and are in a condition for safe operation. This section covers the regulatory mechanics of Airworthiness Directives (ADs) under 14 CFR Part 39, the legal distinction between manufacturer Service Bulletins (SBs) and federal rules, the process of obtaining Alternate Means of Compliance (AMOC), and the definitive classification of Major vs. Minor Repairs and Alterations under 14 CFR Part 43 Appendix A.
1. Airworthiness Directives (14 CFR Part 39)
Airworthiness Directives (ADs) are legally binding federal regulations codified under Title 14 CFR Part 39 . The FAA issues an AD when an unsafe condition is discovered in a product (an aircraft, aircraft engine, propeller, or appliance), and that condition is likely to exist or develop in other products of the same type design ( 14 CFR §39.5 ). AIRWORTHINESS DIRECTIVE (AD) LIFECYCLE
- ┌────────────────────────────────────────────────────────────────────────┐
- │ Unsafe Condition Discovered in Field / NTSB Finding / Fleet Service SDR│
- └───────────────────────────────────┬────────────────────────────────────┘
- │
- ┌─────────────────────────────┴─────────────────────────────┐
- ▼ ▼
- ┌──────────────────────────────────┐ ┌──────────────────────────────────┐
- │ CRITICAL URGENCY │ │ STANDARD TIMELINE │
- ├──────────────────────────────────┤ ├──────────────────────────────────┤
- │ • Emergency AD Issued │ │ • Notice of Proposed Rulemaking │
- │ • Direct Priority Wire/Email │ │ (NPRM) in Federal Register │
- │ • Immediate Grounding or Action │ │ • Public Comment Period │
- │ Before Next Flight │ │ • Final Rule AD Published │
- │ • Codified in Federal Register │ │ • Specific Calendar Effective Dt │
- └────────────────┬─────────────────┘ └────────────────┬─────────────────┘
- │ │
- └─────────────────────┬─────────────────────┘
- ▼
- ┌────────────────────────────────────────────────────────────────────────┐
- │ Compliance Verification & Permanent Logbook Record Entry (14 CFR §43.9)│
- │ Method, AD Number, Rev Date, Date/Time Met, Next Due Date/Hours/Cycles │
- └────────────────────────────────────────────────────────────────────────┘
- Legal Mandate & Responsibilities (§39.7 & §91.403)
Prohibition on Operation: Under 14 CFR §39.7 , "Anyone who operates a product that does not meet the requirements of an applicable airworthiness directive is in violation of this section," and under §39.9 each operation is a separate violation. Operating an aircraft that is out of compliance with an applicable AD is a direct violation of federal law and immediately invalidates the airworthiness status of the aircraft.
Owner vs. Mechanic Responsibility: Under 14 CFR §91.403(a) , the registered owner or operator is primarily responsible for maintaining the aircraft in an airworthy condition, including compliance with all ADs. However, the maintenance technician is responsible for determining AD compliance during Annual/100-hour inspections ( §43.15 ) and recording the exact compliance status in the maintenance record ( §43.11 and §91.417 ).
2. AD Types, Numbering System & Alternate Means of Compliance (AMOC)
Understanding the structure, classification, and numbering system of ADs is essential for accurate compliance tracking and airframe maintenance auditing.
AD Numbering System Anatomy
FAA Airworthiness Directives utilize a standardized three-part numbering sequence: 2026 − 14 − 08 R1 \mathbf{2026-14-08\text{ R1}} 2026 − 14 − 08 R1
2026 = Year of issuance (2026).
14 = Biweekly publishing period (the 14th biweekly period of the year, out of 26).
08 = Sequential number assigned within that biweekly period.
R1 = Revision number (Revision 1). Revisions supersede or clarify previous releases.
AD Classifications & Compliance Triggers
AD Classification Operational Trigger & Requirements Example Scenario
Emergency AD Immediate compliance required before further flight or within minimal flight hours. Issued without prior notice due to critical safety-of-flight hazard. Detection of fatigue cracks in main rotor blade spars on a helicopter type.
Standard / Biweekly AD Compliance mandated by a specific effective calendar date , flight hour threshold, or landing cycle limit following publication. Repetitive ultrasonic inspection of wing carry-through structures within 100 hours or 6 months.
One-Time Compliance AD Requires a specific terminating modification, part replacement, or inspection once. Once completed, no ongoing action is needed. Replacement of an unapproved fuel pump selector valve with a redesigned part.
Recurring / Repetitive AD Requires repetitive inspections or servicing at specified intervals (e.g., every 100 hours, 500 landings, or 12 calendar months) until a terminating action is performed. Eddy current inspection of wing attach bolt holes every 200 flight hours.
Conditional AD Requires inspection or replacement only upon the occurrence of a specific event. Sudden engine stoppage, prop strike, or severe turbulence exceeding G G G -limits.
Alternate Means of Compliance (AMOC)
Under 14 CFR §39.19 , an aircraft operator or maintenance facility may propose an Alternate Means of Compliance (AMOC) or a change in the compliance time if the proposal provides an acceptable level of safety (§39.19). If a change to the product affects your ability to do what the AD requires, you must request an AMOC (§39.17).
Important
You may use an AMOC only if the manager of the FAA office identified in the AD approves it (§39.19); each AD names that office (§39.21). Proposals normally go through your principal inspector, or directly to the manager if you have none. Local FSDO Aviation Safety Inspectors (ASIs) do NOT approve AMOCs.
3. Service Bulletins (SBs) vs. Regulatory Mandates
A frequent source of legal confusion on the hangar floor and on FAA examinations is the operational status of manufacturer technical publications. TECHNICAL DIRECTIVE LEGAL STATUS
- ┌────────────────────────────────────────────────────────────────────────────┐
- │ FEDERAL REGULATORY HIERARCHY │
- ├────────────────────────────────────────────────────────────────────────────┤
- │ 1. FAA Airworthiness Directive (14 CFR Part 39) ──> MANDATORY FOR ALL │
- │ 2. Airworthiness Limitations Section (ALS/TCDS) ──> MANDATORY FOR ALL │
- │ 3. Part 121 / 135 Operations Specifications ──> MANDATORY FOR OPERATOR │
- │ 4. Manufacturer Service Bulletins (SB / ASB) ──> ADVISORY FOR PART 91 │
- └────────────────────────────────────────────────────────────────────────────┘
- Mandatory vs. Non-Mandatory Criteria for Service Bulletins
General Rule for Part 91 (General Aviation): Service Bulletins (SBs), Alert Service Bulletins (ASBs), Service Letters (SLs), and Service Instructions (SIs) published by airframe, engine, or propeller manufacturers (e.g., Cessna, Piper, Beechcraft, Boeing, Lycoming) are advisory in nature . Even if the manufacturer marks the document "Mandatory" , "Alert" , or "Critical Safety" , it does NOT carry the force of federal law for a Part 91 general aviation operator unless adopted by the FAA.
Conditions Making SBs Legally Mandatory:
Referenced in an FAA Airworthiness Directive: When an AD incorporates an SB by reference (e.g., "Inspect spar per Boeing Alert Service Bulletin 737-53A1234" ), the referenced SB becomes legally mandatory under federal law.
Airworthiness Limitations Section (ALS): If an SB modifies an item in the FAA-approved Airworthiness Limitations Section of the aircraft's maintenance manual, compliance is mandatory under 14 CFR §91.403(c) .
Commercial Operations (Part 121 / Part 135): If a commercial operator's FAA-approved Continuous Airworthiness Maintenance Program (CAMP) or Operations Specifications (OpSpecs) incorporate the manufacturer's SBs, compliance is mandatory for that specific certificate holder.
4. Major vs. Minor Repairs and Alterations (Part 43 Appendix A)
Title 14 CFR Part 1.1 and 14 CFR Part 43, Appendix A establish the legal definitions and definitive technical classifications separating major repairs/alterations from minor maintenance. REPAIR & ALTERATION CLASSIFICATION DECISION TREE
- [ Proposed Maintenance Work ]
- │
- ┌───────────────────────┴───────────────────────┐
- ▼ ▼
- Appreciably affects weight, Elementary operation / Standard
- balance, structural strength, practice not appreciably
- performance, flight characteristics, affecting airworthiness,
- OR cannot be done by elementary completed via accepted data
- operations / standard practices? (AC 43.13-1B / standard manual)
- │ │
- ▼ ▼
- ┌───────────────────┐ ┌───────────────────┐
- │ MAJOR REPAIR / │ │ MINOR REPAIR / │
- │ MAJOR ALTERATION │ │ MINOR ALTERATION │
- ├───────────────────┤ ├───────────────────┤
- │ • Requires FAA │ │ • Requires only │
- │ APPROVED DATA │ │ ACCEPTABLE DATA │
- │ • Execute FAA │ │ • Standard logbook│
- │ Form 337 │ │ entry (§43.9) │
- │ • IA or Part 145 │ │ • A&P Mechanic │
- │ sign-off return │ │ sign-off return │
- └───────────────────┘ └───────────────────┘
- Definitive Classification Matrix per 14 CFR Part 43 Appendix A
Category Regulatory Definition Specific Airframe Examples (Appendix A)
Airframe Major Repair A repair that: (1) if improperly done, might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other airworthiness qualities; OR (2) is not done according to accepted practices or cannot be done by elementary operations. • Splicing or rebuilding of primary wing spars, spar caps, or truss members.; • Splicing of skin sheets involving primary structural loads.; • Repair of pressurized cabin skin and pressure bulkheads.; • Rebuilding or splicing damaged longerons, frames, or fuselage bulkheads.; • Repair of movable control surface balance weights, horns, or hinges.; • Repair of engine mounts or landing gear shock strut cylinders.
Airframe Major Alteration An alteration not listed in the aircraft, engine, or propeller specifications that: (1) might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other airworthiness qualities; OR (2) is not done according to accepted practices or cannot be done by elementary operations. • Conversion of an aircraft from landplane to seaplane (installing floats) or skiplane.; • Changes to the basic design of the structural wing, empennage, or fuselage geometry (e.g., adding winglets or STOL leading edges).; • Installation of an unapproved autopilot, radar, or navigation system.; • Installation of auxiliary fuel tanks in wings or fuselage.; • Alterations to flight control systems (changing boost ratios or mechanical advantage).; • Gross weight increase modifications.
Minor Repair / Alteration Maintenance or alteration work that does not meet the legal threshold of a major repair or major alteration. • Standard sheet metal flush or riveted lap patches on non-pressurized skin per AC 43.13-1B.; • Replacing worn flight control cables with identical OEM assemblies.; • Replacing tires, brake linings, wheel bearings, or shock strut O-rings.; • Replacing avionics with identical form-fit-function slide-in TSO units.