Study guide
14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules
FAA Aviation Mechanic — Airframe AMA
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Strategy
1.1 Exam Structure, Eligibility & 14 CFR Part 65 Requirements 1.2 Study Strategy, Blueprint Weighting & Core Formulas
2 Chapter 2: Metallic Structures & Sheet Metal Repair
2.1 Aluminum Alloys, Heat Treatment & Rivet Identification 2.2 Rivet Layout, Edge Distance, Spacing & Driving Standards 2.3 Sheet Metal Layout: Bend Allowance, Setback & Forming 2.4 Sheet Metal Inspection, Damage Evaluation & Flush/Lap Repairs
3 Chapter 3: Non-Metallic Structures: Composites, Wood, Fabric & Transparent Plastics
3.1 Advanced Composites: Fiber Types, Resin Matrices & Core Materials 3.2 Composite Damage Assessment, Repair Methods & Shop Safety 3.3 Aircraft Wood Structures: Defects, Allowable Repairs & Gluing 3.4 Aircraft Fabric Covering, Inspection & Doping/Finishing Processes 3.5 Transparent Plastics, Windows, Windshields & Cabin Interiors
4 Chapter 4: Welding & Structural Fasteners
4.1 Oxyacetylene & Electric Arc Welding Principles for Aviation 4.2 Tubular Steel Fuselage Inspection, Defect Types & Approved Repairs 4.3 Special Structural Fasteners, Blind Rivets & Precision Hardware
5 Chapter 5: Flight Controls, Assembly & Rigging
5.1 Primary and Secondary Flight Control Surfaces & Aerodynamics 5.2 Control Cables, Tensiometers & Temperature-Compensated Rigging 5.3 Turnbuckles, Cable Safetying, Pulleys & Fairleads 5.4 Control Surface Travel, Mass Balancing & Flutter Prevention
6 Chapter 6: Hydraulic & Pneumatic Power Systems
6.1 Hydraulic Fluids, Seal Materials & Contamination Control 6.2 Hydraulic Reservoirs, Power Pumps & Accumulators 6.3 Hydraulic Valves: Pressure, Flow & Directional Control 6.4 High-Pressure Pneumatic Systems, Air Compressors & Moisture Control
7 Chapter 7: Aircraft Landing Gear Systems
7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins 7.2 Retraction Mechanisms, Down-Locks, Alignment & Torque Links 7.3 Aircraft Brakes, Multi-Disc Systems & Anti-Skid Operations 7.4 Aircraft Tires, Wheels, Bearings & Emergency Extension Systems
8 Chapter 8: Aircraft Fuel Systems
8.1 Fuel Tank Types: Rigid, Bladder & Integral (Wet Wing) Tanks 8.2 Fuel System Plumbing: Boost Pumps, Selector Valves & Filtration 8.3 Crossfeed, Fuel Jettison, Fuel Quantity Indication & Probes 8.4 Fuel System Maintenance, Defueling & Tank Confined-Space Safety
9 Chapter 9: Airframe Electrical Systems
9.1 AC & DC Power Generation: Alternators, Inverters & TRUs 9.2 Aircraft Electrical Distribution, Bus Architecture & Circuit Protection 9.3 Aircraft Wire Selection (MIL-W-5086 / MIL-W-22759), Sizing & Bundling 9.4 Bonding, Grounding, Static Dischargers & Electrical Troubleshooting
10 Chapter 10: Cabin Atmosphere & Environmental Control
10.1 Vapor-Cycle & Air-Cycle Machine (ACM) Refrigeration Systems 10.2 Cabin Pressurization: Outflow Valves, Safety Valves & Regulators 10.3 Heating Systems: Combustion Heaters, Exhaust Muffs & Bleed Air 10.4 Aircraft Oxygen Systems: Continuous-Flow, Diluter-Demand & Generators
11 Chapter 11: Aircraft Instrument Systems
11.1 Pitot-Static Systems: Altimeter, VSI, Airspeed & Error Diagnosis 11.2 Gyroscopic Flight Instruments: Rigidity, Precession & Power Sources 11.3 Engine & System Instruments: Bourdon Tubes, Synchros & EICAS 11.4 Instrument Installation, Magnetic Compass Swing & Regulatory Inspections
12 Chapter 12: Communication, Navigation & Warning Systems
12.1 VHF/HF Communications, Antennas & Coaxial Cable Installation 12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar 12.3 Transponders, Altitude Encoders & Emergency Locator Transmitters 12.4 Position & Warning Systems: Landing Gear Horns, Stall & Warning
13 Chapter 13: Ice, Rain & Fire Protection Systems
13.1 Ice Detection, Pneumatic Deice Boots & Electrothermal Systems 13.2 Wing & Cowl Thermal Bleed-Air Anti-Ice Systems & Rain Removal 13.3 Fire & Smoke Detection: Spot Detectors, Continuous Loops & Optical Sensors 13.4 Fire Extinguishing Systems: HRD Containers, Squibs & Two-Shot Architecture
14 Chapter 14: Airframe Inspection & Maintenance Regulations
14.1 14 CFR Part 43 Appendix D: Scope of 100-Hour & Annual Inspections 14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations 14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules 14.4 Airframe Corrosion Identification, Treatment, Chemical Conversion & NDT
15 Chapter 15: Rotorcraft Fundamentals
15.1 Rotorcraft Aerodynamics, Rotor System Classifications & Flight Controls 15.2 Rotor Blades, Transmissions, Drive Systems & Skid Landing Gear Inspection 15.3 Rotor Track & Balance, Vibration Diagnosis & Helicopter Ground Safety
16 Chapter 16: Water & Waste Systems
16.1 Potable Water Systems: Components, Operation, Servicing & Sanitizing 16.2 Lavatory Waste Systems: Vacuum & Recirculating Types, Servicing & Safety
14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules
Key Takeaways Explain This Topic AI
FAA Form 337 records Major Repairs and Major Alterations in addition to the maintenance record entry; it is executed at least in duplicate, with a signed copy to the aircraft owner and a copy forwarded to the FAA Aircraft Registration Branch in Oklahoma City within 48 hours after return to service.
Under 14 CFR Part 43 Appendix B(d), whenever an extended-range fuel tank is installed in the passenger or baggage compartment, Form 337 is executed in at least triplicate and a copy is kept on board the aircraft (14 CFR §91.417(d)).
Major repairs and alterations require FAA-Approved Data (STCs, TCDS, ADs, FAA-approved SRMs, DER Form 8110-3, or FAA Field Approvals); Advisory Circular AC 43.13-1B is acceptable data and cannot serve as approved data for major work unless specifically authorized.
14 CFR §43.9 maintenance entries require 4 items (description, date, name of performer, and the approver's signature, certificate number, and kind of certificate), while §43.11 inspection entries require the specified certification statement or a similarly worded one.
14 CFR §91.417 separates temporary records (retained for 1 year or until superseded) from permanent records (total time, life-limited parts, overhaul times, AD status, and major alteration Form 337s retained permanently and transferred upon sale).
Last updated: October 2026
14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules
FAA Airframe Subject Matter Focus: Airframe technicians and Inspection Authorization (IA) holders must maintain flawless compliance with FAA documentation mandates. This section explores the execution and multi-copy distribution of FAA Form 337 (Major Repair and Major Alteration), the critical legal hierarchy of Approved Data vs. Acceptable Data , the precise regulatory anatomy of 14 CFR §43.9 and §43.11 logbook endorsements, and the permanent vs. temporary record retention requirements of 14 CFR §91.417 .
1. FAA Form 337: Purpose, Execution & Multi-Copy Distribution
FAA Form 337 ( Major Repair and Major Alteration: Airframe, Powerplant, Propeller, or Appliance ) provides the FAA and the aircraft owner with a formal, standardized record of major work accomplished on a certificated aeronautical product. FAA FORM 337 DISTRIBUTION WORKFLOW
- [ Major Repair or Major Alteration Completed ]
- │
- [ Form 337 Executed & Block 7 Signed by IA / 145 ]
- │
- ┌─────────────────────────┼─────────────────────────┐
- │ │ │
- ▼ ▼ ▼
- ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐
- │ SIGNED COPY │ │ SECOND COPY │ │ THIRD COPY │
- │ (Given to the │ │ (FAA Aircraft │ │ (Required ONLY │
- │ Aircraft Owner) │ │ Registry, OKC, │ │ for Fuel Tanks │
- │ │ │ within 48 Hours)│ │ in Cabin/Cargo) │
- └─────────────────┘ └─────────────────┘ └─────────────────┘
- Form 337 Distribution Mandates (14 CFR Part 43 Appendix B)
Standard Distribution (Two Copies):
Signed Copy: Given to the aircraft owner; copies for major alterations are kept in the records that transfer with the aircraft ( 14 CFR §91.417(a)(2)(vi) ).
Second Copy: Forwarded by the person performing the work to the FAA Aircraft Registration Branch in Oklahoma City within 48 hours after the aircraft is approved for return to service (Appendix B(a)(3)).
Special Passenger/Baggage Compartment Fuel Tank Rule:
Under 14 CFR Part 43 Appendix B, paragraph (d) , whenever an extended-range fuel tank is installed in the passenger compartment or a baggage compartment, the person who performs the work and the person approving it execute Form 337 in at least triplicate : one copy on board, one to the owner, and one to the FAA Aircraft Registration Branch within 48 hours after the work is inspected.
The on-board copy must be kept on board the modified aircraft by the owner or operator ( 14 CFR §91.417(d) ).
2. FAA Form 337 Anatomy & Field Approval Mechanics
FAA Form 337 is divided into eight discrete sections, each serving a specific legal function: ┌─────────────────────────────────────────────────────────────────────────────┐
- │ FAA FORM 337 BLOCKS │
- ├─────────────────────────────────────────────────────────────────────────────┤
- │ Block 1: Aircraft Identification (Make, Model, Serial No., N-Number) │
- │ Block 2: Owner Information (Name and Physical Address) │
- │ Block 3: For FAA Use Only (FAA Field Approval Stamp, Signature, Date) │
- │ Block 4: Type (Checkboxes: Major Repair [ ] / Major Alteration [ ]) │
- │ Block 5: Unit Identified (Airframe, Powerplant, Propeller, Appliance) │
- │ Block 6: Conformity Statement (Mechanic / Repair Station certification) │
- │ Block 7: Approval for Return to Service (IA, DAR, Repair Station Sign-off) │
- │ Block 8: Description of Work Accomplished (Detailed engineering data, │
- │ approved data citations, schematics, weight & balance, and ICA) │
- └─────────────────────────────────────────────────────────────────────────────┘
- Approved Data vs. Acceptable Data Hierarchy
A core regulatory concept is the distinction between Acceptable Data and Approved Data :
Classification Definition & Legal Authority Authorized Scope & Documents
Acceptable Data Maintenance methods, techniques, and practices acceptable to the Administrator under 14 CFR §43.13(a) . • Authorized strictly for Minor Repairs, Minor Alterations, and Routine Servicing .; • Examples: FAA Advisory Circular AC 43.13-1B ( Acceptability of Methods, Techniques, and Practices ), manufacturer general service manuals, standard hardware manuals.; • Rule: AC 43.13-1B is NOT automatically approved data for major repairs/alterations unless specifically authorized.
Approved Data Technical data that has received formal, documented approval from the FAA Administrator. Required for all Major Repairs and Major Alterations . • Mandatory for Major Repairs & Major Alterations .; • Examples of Approved Data:; 1. Type Certificate Data Sheets (TCDS) and Aircraft Specifications.; 2. Supplemental Type Certificates (STCs) .; 3. FAA Airworthiness Directives (ADs) .; 4. Manufacturer Structural Repair Manuals (SRMs) explicitly stamped "FAA Approved" .; 5. FAA Form 8110-3 ( Statement of Compliance with Airworthiness Standards ) signed by an authorized Designated Engineering Representative (DER).; 6. FAA Field Approval endorsed in Block 3 of FAA Form 337 by an FAA Aviation Safety Inspector (ASI).
3. Maintenance Record Entries: 14 CFR §43.9 vs. 14 CFR §43.11
The Code of Federal Regulations strictly distinguishes between record entries for routine maintenance/repairs ( §43.9 ) and record entries for formal inspections ( §43.11 ). LOGBOOK ENTRY REGULATORY ANATOMY
- 1. MAINTENANCE / REPAIR ENTRY (14 CFR §43.9)
- ┌─────────────────────────────────────────────────────────────────┐
- │ 1. Description of work performed (or reference to data) │
- │ 2. Date of completion of the work │
- │ 3. Name of person performing work (if other than approver) │
- │ 4. Signature, Certificate Number, and Kind of Certificate held │
- │ by the person approving the aircraft for return to service │
- └─────────────────────────────────────────────────────────────────┘
- 2. INSPECTION ENTRY (14 CFR §43.11 - 100-Hour / Annual / Progressive)
- ┌─────────────────────────────────────────────────────────────────┐
- │ 1. Type of inspection and brief description of extent │
- │ 2. Date of inspection and Aircraft Total Time in Service (TTIS) │
- │ 3. Signature, Certificate Number, and Kind of Certificate held │
- │ 4. Certification Statement (or a similarly worded one): │
- │ - If Airworthy: "I certify that this aircraft has been │
- │ inspected in accordance with an (Annual/100-Hr) inspection │
- │ and was determined to be in airworthy condition." │
- │ - If Unairworthy: "I certify that this aircraft has been │
- │ inspected in accordance with an (Annual/100-Hr) inspection │
- │ and a list of discrepancies and unairworthy items dated │
- │ [date] has been provided to the aircraft owner/operator." │
- └─────────────────────────────────────────────────────────────────┘
- Critical Contrasts Between §43.9 and §43.11
Total Time in Service: 14 CFR §43.11 explicitly mandates recording the aircraft total time in service for all inspections. In contrast, 14 CFR §43.9 does not strictly mandate recording total time in service for a simple repair or component replacement (though it is standard industry best practice).
Certification Statement: An inspection entry under §43.11 must include the specified airworthy or unairworthy certification statement "or a similarly worded statement" (§43.11(a)(4)-(5)). A routine repair entry under §43.9 requires a description of work, but does not use the §43.11 inspection statement.
4. Maintenance Record Retention: 14 CFR §91.417
Under 14 CFR §91.417 , the registered owner or operator is required to keep maintenance records organized into two legal tiers: Temporary Records and Permanent Records . 14 CFR §91.417 RECORD RETENTION TIERS
- ┌─────────────────────────────────────────────────────────────┐
- │ Aircraft Maintenance Records │
- └──────────────────────────────┬──────────────────────────────┘
- │
- ┌──────────────────────────────┴──────────────────────────────┐
- │ │
- ┌────────┴────────────────────────┐ ┌────────────────────┴────────────────────┐
- │ TEMPORARY RECORDS (§91.417a1) │ │ PERMANENT RECORDS (§91.417a2) │
- ├─────────────────────────────────┤ ├─────────────────────────────────────────┤
- │ • Records of maintenance, │ │ • Total Time in Service (Airframe, │
- │ preventive maintenance, │ │ Engines, Propellers, Rotors) │
- │ routine repairs, and minor │ │ • Current status of Life-Limited Parts │
- │ alterations │ │ • Time Since Last Overhaul (TSOH) │
- │ • 100-Hour, Annual, Progressive │ │ • Current Inspection Status & Dates │
- │ inspection records │ │ • Current AD Compliance Status Log │
- │ • RETENTION PERIOD: │ │ • FAA Form 337s for Major Alterations │
- │ - Until work is repeated / │ │ • RETENTION PERIOD: │
- │ superseded, OR for │ │ - Retained PERMANENTLY and │
- │ - Exactly 1 YEAR after work │ │ TRANSFERRED WITH AIRCRAFT │
- │ is completed │ │ upon sale/transfer of title │
- └─────────────────────────────────┘ └─────────────────────────────────────────┘
- Airworthiness Directive (AD) Permanent Record Requirements
Under 14 CFR §91.417(a)(2)(v) , the permanent AD compliance record must contain specific statutory elements:
The specific AD Number and Revision Date .
The method of compliance utilized (e.g., "Inspected lower spar cap via high-frequency eddy current per AD 2026-08-04 Para (f)(1) and Boeing SB 737-53A1000" ).
If the AD involves recurring action: the time and date when the next action is required .
The maintenance entry for the compliance work itself follows §43.9 (including the approver's signature, certificate number, and kind of certificate), and recording the aircraft total time at compliance is good practice.