Study guide
12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar
FAA Aviation Mechanic — Airframe AMA
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Strategy
1.1 Exam Structure, Eligibility & 14 CFR Part 65 Requirements 1.2 Study Strategy, Blueprint Weighting & Core Formulas
2 Chapter 2: Metallic Structures & Sheet Metal Repair
2.1 Aluminum Alloys, Heat Treatment & Rivet Identification 2.2 Rivet Layout, Edge Distance, Spacing & Driving Standards 2.3 Sheet Metal Layout: Bend Allowance, Setback & Forming 2.4 Sheet Metal Inspection, Damage Evaluation & Flush/Lap Repairs
3 Chapter 3: Non-Metallic Structures: Composites, Wood, Fabric & Transparent Plastics
3.1 Advanced Composites: Fiber Types, Resin Matrices & Core Materials 3.2 Composite Damage Assessment, Repair Methods & Shop Safety 3.3 Aircraft Wood Structures: Defects, Allowable Repairs & Gluing 3.4 Aircraft Fabric Covering, Inspection & Doping/Finishing Processes 3.5 Transparent Plastics, Windows, Windshields & Cabin Interiors
4 Chapter 4: Welding & Structural Fasteners
4.1 Oxyacetylene & Electric Arc Welding Principles for Aviation 4.2 Tubular Steel Fuselage Inspection, Defect Types & Approved Repairs 4.3 Special Structural Fasteners, Blind Rivets & Precision Hardware
5 Chapter 5: Flight Controls, Assembly & Rigging
5.1 Primary and Secondary Flight Control Surfaces & Aerodynamics 5.2 Control Cables, Tensiometers & Temperature-Compensated Rigging 5.3 Turnbuckles, Cable Safetying, Pulleys & Fairleads 5.4 Control Surface Travel, Mass Balancing & Flutter Prevention
6 Chapter 6: Hydraulic & Pneumatic Power Systems
6.1 Hydraulic Fluids, Seal Materials & Contamination Control 6.2 Hydraulic Reservoirs, Power Pumps & Accumulators 6.3 Hydraulic Valves: Pressure, Flow & Directional Control 6.4 High-Pressure Pneumatic Systems, Air Compressors & Moisture Control
7 Chapter 7: Aircraft Landing Gear Systems
7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins 7.2 Retraction Mechanisms, Down-Locks, Alignment & Torque Links 7.3 Aircraft Brakes, Multi-Disc Systems & Anti-Skid Operations 7.4 Aircraft Tires, Wheels, Bearings & Emergency Extension Systems
8 Chapter 8: Aircraft Fuel Systems
8.1 Fuel Tank Types: Rigid, Bladder & Integral (Wet Wing) Tanks 8.2 Fuel System Plumbing: Boost Pumps, Selector Valves & Filtration 8.3 Crossfeed, Fuel Jettison, Fuel Quantity Indication & Probes 8.4 Fuel System Maintenance, Defueling & Tank Confined-Space Safety
9 Chapter 9: Airframe Electrical Systems
9.1 AC & DC Power Generation: Alternators, Inverters & TRUs 9.2 Aircraft Electrical Distribution, Bus Architecture & Circuit Protection 9.3 Aircraft Wire Selection (MIL-W-5086 / MIL-W-22759), Sizing & Bundling 9.4 Bonding, Grounding, Static Dischargers & Electrical Troubleshooting
10 Chapter 10: Cabin Atmosphere & Environmental Control
10.1 Vapor-Cycle & Air-Cycle Machine (ACM) Refrigeration Systems 10.2 Cabin Pressurization: Outflow Valves, Safety Valves & Regulators 10.3 Heating Systems: Combustion Heaters, Exhaust Muffs & Bleed Air 10.4 Aircraft Oxygen Systems: Continuous-Flow, Diluter-Demand & Generators
11 Chapter 11: Aircraft Instrument Systems
11.1 Pitot-Static Systems: Altimeter, VSI, Airspeed & Error Diagnosis 11.2 Gyroscopic Flight Instruments: Rigidity, Precession & Power Sources 11.3 Engine & System Instruments: Bourdon Tubes, Synchros & EICAS 11.4 Instrument Installation, Magnetic Compass Swing & Regulatory Inspections
12 Chapter 12: Communication, Navigation & Warning Systems
12.1 VHF/HF Communications, Antennas & Coaxial Cable Installation 12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar 12.3 Transponders, Altitude Encoders & Emergency Locator Transmitters 12.4 Position & Warning Systems: Landing Gear Horns, Stall & Warning
13 Chapter 13: Ice, Rain & Fire Protection Systems
13.1 Ice Detection, Pneumatic Deice Boots & Electrothermal Systems 13.2 Wing & Cowl Thermal Bleed-Air Anti-Ice Systems & Rain Removal 13.3 Fire & Smoke Detection: Spot Detectors, Continuous Loops & Optical Sensors 13.4 Fire Extinguishing Systems: HRD Containers, Squibs & Two-Shot Architecture
14 Chapter 14: Airframe Inspection & Maintenance Regulations
14.1 14 CFR Part 43 Appendix D: Scope of 100-Hour & Annual Inspections 14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations 14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules 14.4 Airframe Corrosion Identification, Treatment, Chemical Conversion & NDT
15 Chapter 15: Rotorcraft Fundamentals
15.1 Rotorcraft Aerodynamics, Rotor System Classifications & Flight Controls 15.2 Rotor Blades, Transmissions, Drive Systems & Skid Landing Gear Inspection 15.3 Rotor Track & Balance, Vibration Diagnosis & Helicopter Ground Safety
16 Chapter 16: Water & Waste Systems
16.1 Potable Water Systems: Components, Operation, Servicing & Sanitizing 16.2 Lavatory Waste Systems: Vacuum & Recirculating Types, Servicing & Safety
12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar
Key Takeaways Explain This Topic AI
VOR ground stations transmit in the 108.00–117.95 MHz band, broadcasting a 30 Hz omnidirectional reference signal and a 30 Hz rotating variable phase signal whose phase differential corresponds directly to the aircraft's magnetic radial from the station.
The Instrument Landing System (ILS) integrates three distinct radio aids: a VHF Localizer (108.10–111.95 MHz odd tenths, 90/150 Hz lobes) for lateral centerline, a UHF Glideslope (329.15–335.00 MHz, 90/150 Hz lobes) for vertical 3-degree descent path, and 75 MHz Marker Beacons (Outer Blue 400 Hz, Middle Amber 1300 Hz, Inner White 3000 Hz) for range-to-threshold fixes.
Distance Measuring Equipment (DME) operates in the 960–1215 MHz UHF pulsed band to calculate slant-range distance based on radar pulse pair round-trip propagation time (12.36 microseconds per nautical mile), exhibiting slant-range altitude geometry error when directly overhead the ground transponder.
Airborne weather radar transmits 9.3 GHz X-band microwave pulses to detect precipitation density, requiring radomes constructed from moisture-free dielectric fiberglass/honeycomb laminates coated exclusively with non-metallic paint to prevent RF attenuation and beam distortion.
ACS Subject II.I also covers interphone and intercom, HF and SATCOM, ACARS datalink, autopilot and auto-throttle, rotorcraft stability augmentation, GPWS/TAWS, TCAS, and the radio altimeter, whose separate transmit and receive antennas require matched-length coaxial cables because substituting cable lengths introduces a fixed height error.
Last updated: August 2026
12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar
FAA Airframe Subject Matter Focus: Airframe technicians must understand the operational principles, frequency spectrum assignments, signal modulation characteristics, antenna geometries, and cockpit display indicators for modern and legacy navigation systems. Key areas include VOR phase comparison, ILS localizer/glideslope/marker beacon receivers, DME interrogation timing, ADF loop/sense antenna arrays, GPS satellite constellations and RAIM requirements, and weather radar radome maintenance.
1. VHF Omnidirectional Range (VOR)
The VHF Omnidirectional Range (VOR) is a terrestrial radio navigation system operating in the VHF band from 108.00 MHz to 117.95 MHz (sharing the 108.00–111.95 MHz segment with ILS localizers on even-tenth and odd-hundredth decimal frequencies). VOR PHASE COMPARISON PRINCIPLE
- Magnetic North (000° Radial)
- Phase Difference = 0°
- ▲
- │
- │
- 270° Radial (West) │ 090° Radial (East)
- Phase Difference = 270° ◄────── [VOR] ──────► Phase Difference = 090°
- │
- │
- │
- ▼
- 180° Radial (South)
- Phase Difference = 180°
- Principle of Operation
Two 30 Hz Signals: The VOR ground station broadcasts two separate 30 Hz signals simultaneously:
Reference Phase Signal: An omnidirectional 30 Hz FM subcarrier (frequency modulated onto a 9960 Hz subcarrier) transmitted identically in all 360 ∘ 360^\circ 36 0 ∘ directions.
Variable Phase Signal: A directional 30 Hz AM signal produced by an antenna array rotating electronically at 30 revolutions per second (1800 RPM).
Phase Differential: The phase of the rotating variable signal varies continuously with azimuth, while the reference signal is constant. The ground station is synchronized so that the variable and reference signals are exactly in phase ( 0 ∘ 0^\circ 0 ∘ phase difference) at Magnetic North ( 000 ∘ 000^\circ 00 0 ∘ ) .
Azimuth Determination: At any bearing around the station, the airborne VOR receiver measures the exact phase angle difference between the two 30 Hz signals. A phase difference of 090 ∘ 090^\circ 09 0 ∘ corresponds to the 090 ∘ 090^\circ 09 0 ∘ radial (due East), 180 ∘ 180^\circ 18 0 ∘ to the 180 ∘ 180^\circ 18 0 ∘ radial (due South), and 270 ∘ 270^\circ 27 0 ∘ to the 270 ∘ 270^\circ 27 0 ∘ radial (due West).
Cockpit Instrumentation & Deflection
Course Deviation Indicator (CDI): Features an Omni Bearing Selector (OBS) knob, a vertical needle, and a TO/FROM/OFF ambiguity flag.
Angular Scale: Each dot on a standard 5-dot CDI represents 2 ∘ 2^\circ 2 ∘ of angular course deviation ( 10 ∘ 10^\circ 1 0 ∘ full-scale deflection either side of center).
TO/FROM Ambiguity Resolver: Resolves the 180 ∘ 180^\circ 18 0 ∘ ambiguity by determining whether flying the selected course heading will take the aircraft toward ("TO") or away from ("FROM") the VOR ground station.
2. Instrument Landing System (ILS)
The Instrument Landing System (ILS) provides precision horizontal (lateral) and vertical guidance to an aircraft during approach and landing. An ILS installation comprises three distinct airborne receiving systems. INSTRUMENT LANDING SYSTEM (ILS) ARCHITECTURE
1. LOCALIZER (108.10 - 111.95 MHz) - Lateral Centerline
- [ Runway ] ═══> Runway Centerline
- ▲
- │ 90 Hz Yellow Sector (Fly Right) \ /
- ├──────────────────────────────────────────>< Approaching Aircraft
- │ 150 Hz Blue Sector (Fly Left) / \
2. GLIDESLOPE (329.15 - 335.00 MHz) - Vertical Glidepath
- Approaching Aircraft ───┐
- \ 90 Hz Upper Sector (Fly Down)
- \==================== 3.0° Descent Path
- / 150 Hz Lower Sector (Fly Up)
- [Antenna] /_
- ══════════════════════════════════════ Runway Ground
- 1. Localizer (LOC)
Frequency Range: 108.10 MHz to 111.95 MHz (operating exclusively on odd-tenth decimal frequencies , e.g., 108.10, 108.15, 108.30, 109.90 MHz; 40 discrete channels).
Modulation Lobes: Transmits two overlapping directional amplitude-modulated RF lobes aligned with the runway centerline:
90 Hz AM Lobe: Radiated toward the left side of the approach path ("Yellow sector").
150 Hz AM Lobe: Radiated toward the right side of the approach path ("Blue sector").
Centerline Deviation: The airborne receiver compares the depth of modulation (DDM) between the 90 Hz and 150 Hz signals. On the exact runway centerline, the two modulations are equal ( DDM = 0 \text{DDM} = 0 DDM = 0 ), and the CDI vertical needle centers. Full-scale needle deflection represents 2.5 ∘ 2.5^\circ 2. 5 ∘ (approximately 4 times more sensitive than VOR).
2. Glideslope (GS)
Frequency Range: 329.15 MHz to 335.00 MHz in the UHF band (40 channels). The glideslope frequency is automatically paired with the selected VHF localizer frequency.
Modulation Lobes: Provides vertical guidance along a standard 3.0 ∘ 3.0^\circ 3. 0 ∘ glidepath :
90 Hz AM Lobe: Radiated in the upper sector (above glidepath).
150 Hz AM Lobe: Radiated in the lower sector (below glidepath).
Indicator Action: If the aircraft descends below the 3.0 ∘ 3.0^\circ 3. 0 ∘ path, the 150 Hz signal predominates, deflecting the horizontal glideslope needle upward ("fly up"). Full-scale deflection represents 0.7 ∘ 0.7^\circ 0. 7 ∘ of vertical deviation.
3. 75 MHz Marker Beacons
Marker beacons operate on a single fixed carrier frequency of 75.000 MHz , radiating a highly directional elliptical fan beam vertically upward along the approach corridor to provide definite distance fixes. 75 MHz MARKER BEACON SPECIFICATIONS
- ┌───────────────┬────────────┬─────────────┬──────────────┬──────────────────┐
- │ Marker Type │ Distance │ Visual Light│ Audio Pitch │ Audio Code Keying│
- ├───────────────┼────────────┼─────────────┼──────────────┼──────────────────┤
- │ Outer (OM) │ 4–7 NM │ Blue (●) │ 400 Hz (Low) │ 2 Dashes / sec │
- │ Middle (MM) │ ~3,500 ft │ Amber (●) │ 1300 Hz (Med)│ Dot-Dash-Dot-Dash│
- │ Inner (IM) │ ~1,000 ft │ White (●) │ 3000 Hz (Hi) │ Continuous Dots │
- └───────────────┴────────────┴─────────────┴──────────────┴──────────────────┘
- 3. Distance Measuring Equipment (DME) & Automatic Direction Finder (ADF)
- Distance Measuring Equipment (DME)
DME is a secondary radar navigation system operating in the UHF band from 960 MHz to 1215 MHz that provides continuous line-of-sight distance measurement between the aircraft and a ground transponder station. DME SLANT-RANGE TIMING PRINCIPLE
- [Aircraft Interrogator] ───────────────────────────┐
- ▲ │ 1. Interrogation
- │ │ Pulse Pairs
- │ 3. Reply Pulse Pairs ▼
- │ Received & Timed [Ground Transponder]
- └───────────────────────────────────── (50 µs Fixed Delay)
Pulse Timing & Slant Range: The aircraft interrogator transmits coded pulse pairs (spaced 12 μ s 12\ \mu\text{s} 12 μ s for X-channel or 36 μ s 36\ \mu\text{s} 36 μ s for Y-channel) at random pulse repetition rates (jitter). The ground station receives the pulses, delays them by an exact 50.0 μ s 50.0\ \mu\text{s} 50.0 μ s receiver delay , and retransmits reply pulse pairs on a frequency separated by ± 63 MHz \pm 63\text{ MHz} ± 63 MHz .
Distance Calculation: The airborne interrogator measures total elapsed time ( Δ t \Delta t Δ t ), subtracts the 50 μ s 50\ \mu\text{s} 50 μ s fixed ground station delay, and divides by the round-trip speed of light ( 12.36 μ s 12.36\ \mu\text{s} 12.36 μ s per nautical mile): Distance (NM) = Δ t − 50 μ s 12.36 μ s/NM \text{Distance (NM)} = \frac{\Delta t - 50\ \mu\text{s}}{12.36\ \mu\text{s/NM}} Distance (NM) = 12.36 μ s/NM Δ t − 50 μ s
Slant-Range Error: DME measures line-of-sight slant-range distance ( R = d 2 + h 2 R = \sqrt{d^2 + h^2} R = d 2 + h 2 ). An aircraft passing directly over a DME station at 6,076 feet altitude (1 NM) will indicate exactly 1.0 NM on the cockpit DME readout rather than zero.
Antenna: A small, low-drag UHF shark-fin or stub antenna mounted on the bottom centerline of the fuselage to ensure continuous line-of-sight to ground stations without airframe masking in turns.
Automatic Direction Finder (ADF)
The ADF is an LF/MF radio direction finder operating in the 190 kHz to 535 kHz band (and 540–1620 kHz commercial AM broadcast band) tuned to Non-Directional Beacons (NDB) .
Antenna System: Employs two antennas:
Loop Antenna: Bidirectional receiving pattern with two distinct nulls ( 180 ∘ 180^\circ 18 0 ∘ apart).
Sense Antenna: Omnidirectional receiving pattern.
Cardioid Pattern: Electrically summing the loop and sense antenna signals produces a unidirectional heart-shaped cardioid radiation pattern , resolving the 180 ∘ 180^\circ 18 0 ∘ ambiguity to point directly toward the ground beacon.
Cockpit Display: A Relative Bearing Indicator (RBI) or Radio Magnetic Indicator (RMI) points a needle directly toward the NDB station.
Error Sources: ADF signals are susceptible to quadrantal error (signal bending around the aircraft metallic fuselage), night effect (ionospheric skywave interference at dawn/dusk), and thunderstorm / coastal refraction .
4. Global Positioning System (GPS) & Airborne Weather Radar Radomes GPS SATELLITE TRILATERATION & RAIM
- 🛰️ Satellite 1
- / (Distance R1)
- /
- 🛰️ Satellite 2 ──── [Aircraft 3D Position] ──── 🛰️ Satellite 3
- (Distance R2) (X, Y, Z, Δt Clock) (Distance R3)
- \
- \
- 🛰️ Satellite 4
- (Resolves Clock Bias Δt)
- GPS Satellite Constellation & Trilateration
Constellation Architecture: The Global Positioning System (GPS / NAVSTAR) consists of a minimum of 24 operational satellites deployed in 6 orbital planes at an altitude of approximately 20,200 km (10,900 NM). Civil aviation operates on the L1 carrier frequency at 1575.42 MHz (UHF band) using Coarse/Acquisition (C/A) code.
Pseudo-Range & Clock Bias: The GPS receiver measures the time of arrival (TOA) of coded signals from each satellite to compute the pseudo-range ( R = c ⋅ Δ t R = c \cdot \Delta t R = c ⋅ Δ t ). Because the quartz clock in the airborne receiver is not as precise as the atomic cesium/rubidium clocks on the satellites, a fourth measurement is required:
3 Satellites: Compute 3-dimensional spatial position ( X , Y , Z X, Y, Z X , Y , Z latitude, longitude, altitude).
4 Satellites: Resolve airborne receiver clock bias ( Δ t \Delta t Δ t ), providing precise 3D position and atomic time synchronization.
Receiver Autonomous Integrity Monitoring (RAIM):
Fault Detection (FD): Requires a minimum of 5 satellites in view with acceptable geometry (or 4 satellites plus barometric altimeter aiding) to detect a malfunctioning satellite.
Fault Detection and Exclusion (FDE): Requires a minimum of 6 satellites in view (or 5 plus barometric aiding) to detect and automatically isolate/exclude a faulty satellite from navigation calculations without interrupting IFR navigation.
Airborne Weather Radar & Radome Maintenance
Airborne weather radar operates in the X-band (typically 8.8 GHz to 9.3 GHz) or C-band (5.4 GHz) microwave spectrum to detect precipitation droplets and convective storm cells ahead of the aircraft. Radar returns depend on droplet reflectivity factor ( Z ∝ D 6 Z \propto D^6 Z ∝ D 6 , where D D D is droplet diameter). RADOME STRUCTURAL SANDWICH CORE
- RF Radar Waves Transparent Transmission
- ═══════════════════════════════════════════════>
- ┌───────────────────────────────────────────┐
- │ 1. Non-Metallic Outer Polyurethane Finish │
- ├───────────────────────────────────────────┤
- │ 2. High-Strength Fiberglass Facing Ply │
- ├───────────────────────────────────────────┤
- │ 3. Nomex Honeycomb / Syntactic Foam Core │ (Moisture-Free!)
- ├───────────────────────────────────────────┤
- │ 4. Inner Fiberglass Facing Ply │
- └───────────────────────────────────────────┘
- Radome Construction & Inspection Standards
Dielectric Construction: The nose radome is a precision aerodynamic fairing constructed from non-metallic dielectric materials (e.g., woven fiberglass-epoxy facings bonded over a Nomex honeycomb or closed-cell foam core). The core thickness is precisely tuned to one-half or one-quarter of the radar wavelength to ensure maximum RF transparency and minimal beam refraction.
Moisture Intrusion Hazard: Water has an extremely high dielectric constant ( ϵ r ≈ 80 \epsilon_r \approx 80 ϵ r ≈ 80 ) compared to fiberglass ( ϵ r ≈ 4 \epsilon_r \approx 4 ϵ r ≈ 4 ). Moisture penetrating through pinholes, cracks, or voids in the radome absorbs and scatters microwave energy, creating blind spots, false radar returns, and internal steam delamination during flight.
Painting Restrictions (CRITICAL):
Strict Paint Rules: Radomes must only be painted with approved, specialized non-metallic, high-dielectric polyurethane or epoxy coatings .
PROHIBITION: Paints containing heavy metal pigments (lead, zinc chromate, aluminum flake, or conductive carbon) are strictly prohibited. Metal pigments reflect and attenuate microwave pulses, blinding the weather radar and overheating the transmitter magnetron.
Lightning Diverter Strips: Solid aluminum or segmented metallic button strips installed along the exterior nose surface route direct lightning strikes safely to the aluminum airframe structure without puncturing the non-conductive radome skin.
5. Cabin Communication, Datalink & Integrated Guidance Systems
Subject II.I is broader than the navigation aids above. FAA-G-ACS-1 titles this knowledge area "Communication, Light Signals, and Runway Lighting Systems," and the ACS adds a family of integrated systems that a mechanic installs, inspects, and functionally checks even though the pilot is the one who operates them.
Communication Beyond VHF (AM.II.I.K4, K5, K6)
System Band / Medium Mechanic-Relevant Notes
Interphone / intercom Hardwired audio Flight interphone (crew), service interphone (external jacks at the nose gear, refuel panel, and APU panel), cabin interphone, and passenger address. The nose gear jack is the one used for pushback communication, and its wiring and connector condition are recurring squawks.
HF 2–30 MHz, long range Uses a shunt or probe antenna and an antenna coupler that must be matched to the transceiver; high RF voltage makes the coupler bay a maintenance hazard.
SATCOM Microwave via satellite High-gain or intermediate-gain fuselage antennas plus a diplexer and beam-steering unit. High RF power density — observe the manufacturer's radiation hazard distances and never operate transmit with personnel in front of the antenna.
ACARS Digital datalink over VHF, HF, or SATCOM The Aircraft Communication Addressing and Reporting System exchanges short character-based messages between the aircraft and the operator or ATC. It automatically reports OOOI events (out of gate, off ground, on ground, into gate) and routes maintenance messages. The mechanic's touchpoints are the management unit, the printer, and the datalink antenna.
Integrated Guidance and Surveillance (AM.II.I.K13, K15–K19)
Autopilot (K16). Servos or actuators drive the flight controls from a flight guidance computer. Mechanic tasks: verify servo clutch slip torque , control-run friction, autopilot disconnect function, and system self-test. Rigging errors introduced elsewhere in the control run will present as autopilot faults.
Auto-throttle (K17). Drives the thrust levers through a servo and clutch. It must back-drive smoothly and disconnect cleanly on manual override — an over-tight clutch is a control jam hazard.
Stability Augmentation System, SAS (K18). Explicitly a rotorcraft item in the ACS. SAS applies small, fast, limited-authority control inputs to damp the helicopter's natural instability. Its actuators have limited authority by design so a runaway cannot exceed pilot override.
Radio (radar) altimeter (K19). Measures absolute height above terrain , not barometric altitude, by timing a signal reflected off the ground. It uses two flush-mounted antennas — one transmit, one receive — with a specified separation and a matched-length coaxial pair . Substituting cable lengths introduces a fixed height error, which is why the cable assemblies are controlled parts.
GPWS / TAWS (K15). The Ground Proximity Warning System, and its terrain-database successor TAWS, combine radio altimeter height, barometric rate, gear and flap position, and glideslope deviation to generate terrain warnings. Because it consumes so many inputs, a GPWS fault is frequently caused by a squat switch, flap position sensor, or radio altimeter fault rather than by the GPWS computer.
TCAS (K13). Interrogates other aircraft transponders through directional antennas to build a traffic picture, and depends on a functioning Mode S transponder.
Lighting and Light Signals
The FAA-G-ACS-1 knowledge area title puts aircraft and airport lighting in this same block:
Position (navigation) lights: red left wingtip, green right wingtip, white aft. Anti-collision lights: red rotating beacon and white strobes. These are inspected and operationally checked under AM.II.K.S14 , and their wiring belongs to the electrical system in Chapter 9.
ATC light gun signals are the tower's backup when an aircraft has no radio. A steady green on the ground means cleared for takeoff, a steady red means stop, and a flashing red on the ground means taxi clear of the runway in use. A technician taxiing or towing an aircraft is expected to recognize them.
Runway and taxiway lighting conventions round out the area: runway edge lights are white , taxiway edge lights are blue , taxiway centerline lights are green , and runway centerline lights turn red and white and then red as the remaining runway shortens.