Study guide
5.2 Control Cables, Tensiometers & Temperature-Compensated Rigging
FAA Aviation Mechanic — Airframe AMA
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Strategy
1.1 Exam Structure, Eligibility & 14 CFR Part 65 Requirements 1.2 Study Strategy, Blueprint Weighting & Core Formulas
2 Chapter 2: Metallic Structures & Sheet Metal Repair
2.1 Aluminum Alloys, Heat Treatment & Rivet Identification 2.2 Rivet Layout, Edge Distance, Spacing & Driving Standards 2.3 Sheet Metal Layout: Bend Allowance, Setback & Forming 2.4 Sheet Metal Inspection, Damage Evaluation & Flush/Lap Repairs
3 Chapter 3: Non-Metallic Structures: Composites, Wood, Fabric & Transparent Plastics
3.1 Advanced Composites: Fiber Types, Resin Matrices & Core Materials 3.2 Composite Damage Assessment, Repair Methods & Shop Safety 3.3 Aircraft Wood Structures: Defects, Allowable Repairs & Gluing 3.4 Aircraft Fabric Covering, Inspection & Doping/Finishing Processes 3.5 Transparent Plastics, Windows, Windshields & Cabin Interiors
4 Chapter 4: Welding & Structural Fasteners
4.1 Oxyacetylene & Electric Arc Welding Principles for Aviation 4.2 Tubular Steel Fuselage Inspection, Defect Types & Approved Repairs 4.3 Special Structural Fasteners, Blind Rivets & Precision Hardware
5 Chapter 5: Flight Controls, Assembly & Rigging
5.1 Primary and Secondary Flight Control Surfaces & Aerodynamics 5.2 Control Cables, Tensiometers & Temperature-Compensated Rigging 5.3 Turnbuckles, Cable Safetying, Pulleys & Fairleads 5.4 Control Surface Travel, Mass Balancing & Flutter Prevention
6 Chapter 6: Hydraulic & Pneumatic Power Systems
6.1 Hydraulic Fluids, Seal Materials & Contamination Control 6.2 Hydraulic Reservoirs, Power Pumps & Accumulators 6.3 Hydraulic Valves: Pressure, Flow & Directional Control 6.4 High-Pressure Pneumatic Systems, Air Compressors & Moisture Control
7 Chapter 7: Aircraft Landing Gear Systems
7.1 Oleo Shock Struts: Servicing, Air/Oil Charging & Metering Pins 7.2 Retraction Mechanisms, Down-Locks, Alignment & Torque Links 7.3 Aircraft Brakes, Multi-Disc Systems & Anti-Skid Operations 7.4 Aircraft Tires, Wheels, Bearings & Emergency Extension Systems
8 Chapter 8: Aircraft Fuel Systems
8.1 Fuel Tank Types: Rigid, Bladder & Integral (Wet Wing) Tanks 8.2 Fuel System Plumbing: Boost Pumps, Selector Valves & Filtration 8.3 Crossfeed, Fuel Jettison, Fuel Quantity Indication & Probes 8.4 Fuel System Maintenance, Defueling & Tank Confined-Space Safety
9 Chapter 9: Airframe Electrical Systems
9.1 AC & DC Power Generation: Alternators, Inverters & TRUs 9.2 Aircraft Electrical Distribution, Bus Architecture & Circuit Protection 9.3 Aircraft Wire Selection (MIL-W-5086 / MIL-W-22759), Sizing & Bundling 9.4 Bonding, Grounding, Static Dischargers & Electrical Troubleshooting
10 Chapter 10: Cabin Atmosphere & Environmental Control
10.1 Vapor-Cycle & Air-Cycle Machine (ACM) Refrigeration Systems 10.2 Cabin Pressurization: Outflow Valves, Safety Valves & Regulators 10.3 Heating Systems: Combustion Heaters, Exhaust Muffs & Bleed Air 10.4 Aircraft Oxygen Systems: Continuous-Flow, Diluter-Demand & Generators
11 Chapter 11: Aircraft Instrument Systems
11.1 Pitot-Static Systems: Altimeter, VSI, Airspeed & Error Diagnosis 11.2 Gyroscopic Flight Instruments: Rigidity, Precession & Power Sources 11.3 Engine & System Instruments: Bourdon Tubes, Synchros & EICAS 11.4 Instrument Installation, Magnetic Compass Swing & Regulatory Inspections
12 Chapter 12: Communication, Navigation & Warning Systems
12.1 VHF/HF Communications, Antennas & Coaxial Cable Installation 12.2 Navigation Systems: VOR, ILS, DME, ADF, GPS & Weather Radar 12.3 Transponders, Altitude Encoders & Emergency Locator Transmitters 12.4 Position & Warning Systems: Landing Gear Horns, Stall & Warning
13 Chapter 13: Ice, Rain & Fire Protection Systems
13.1 Ice Detection, Pneumatic Deice Boots & Electrothermal Systems 13.2 Wing & Cowl Thermal Bleed-Air Anti-Ice Systems & Rain Removal 13.3 Fire & Smoke Detection: Spot Detectors, Continuous Loops & Optical Sensors 13.4 Fire Extinguishing Systems: HRD Containers, Squibs & Two-Shot Architecture
14 Chapter 14: Airframe Inspection & Maintenance Regulations
14.1 14 CFR Part 43 Appendix D: Scope of 100-Hour & Annual Inspections 14.2 Airworthiness Directives (ADs), Service Bulletins & Major Alterations 14.3 FAA Form 337 Execution, Maintenance Record Entries & Logbook Rules 14.4 Airframe Corrosion Identification, Treatment, Chemical Conversion & NDT
15 Chapter 15: Rotorcraft Fundamentals
15.1 Rotorcraft Aerodynamics, Rotor System Classifications & Flight Controls 15.2 Rotor Blades, Transmissions, Drive Systems & Skid Landing Gear Inspection 15.3 Rotor Track & Balance, Vibration Diagnosis & Helicopter Ground Safety
16 Chapter 16: Water & Waste Systems
16.1 Potable Water Systems: Components, Operation, Servicing & Sanitizing 16.2 Lavatory Waste Systems: Vacuum & Recirculating Types, Servicing & Safety
5.2 Control Cables, Tensiometers & Temperature-Compensated Rigging
Key Takeaways Explain This Topic AI
Primary flight control cables are typically 7x19 extra-flexible aircraft-grade cable (carbon steel or CRES stainless steel), while 7x7 flexible cable is utilized for trim and engine controls.
Cable tension must be measured using a calibrated tensiometer with the correct riser block, converted via the specific tensiometer calibration chart, and checked after cycling controls.
Aluminum airframe structures have a coefficient of thermal expansion approximately twice that of steel cables; consequently, cable tension increases significantly in hot ambient temperatures and decreases in freezing weather.
Push-pull control rods require full thread engagement verified either by ensuring a safety wire cannot pass through the witness/inspection hole or by confirming engagement equals or exceeds the shank outside diameter ( D D D ).
Bellcranks change motion direction and mechanical advantage, while torque tubes transmit pure torsional rotary forces through self-aligning bearings.
Last updated: August 2026
Control Cables, Tensiometers & Temperature-Compensated Rigging
FAA Airframe Exam Focus: Flight control cable rigging requires absolute precision. Technicians must understand wire strand classifications (7x7 vs 7x19), cable metallurgy, tensiometer operation and calibration conversions, temperature-compensated rigging charts (due to aluminum vs steel thermal expansion mismatch), and thread engagement inspection criteria for push-pull rods.
1. Aircraft Control Cable Construction & Metallurgy
Flexible steel cables remain the primary mechanical linkage used to transmit control inputs from cockpit yokes and rudder pedals to distant aerodynamic surfaces. CONTROL CABLE STRAND CONFIGURATIONS:
- [ 7x7 Flexible Cable ] [ 7x19 Extra-Flexible Cable ]
- (Medium Flexibility) (Standard Primary Controls)
- ┌───┐ ┌───┐
- ┌─┤ 7 ├─┐ ┌─┤19 ├─┐
- │ └───┘ │ │ └───┘ │
- ┌─┴─┐ ┌─┴─┐ ┌─┴─┐ ┌─┴─┐ ┌─┴─┐ ┌─┴─┐
- │ 7 │ │ 7 │ │ 7 │ │19 │ │19 │ │19 │
- └─┬─┘ └─┬─┘ └─┬─┘ └─┬─┘ └─┬─┘ └─┬─┘
- │ ┌───┐ │ │ ┌───┐ │
- └─┤ 7 ├─┘ └─┤19 ├─┘
- └───┘ └───┘
- 7 strands of 7 wires 7 strands of 19 wires
- Cable Construction Typologies
7 × 7 7 \times 7 7 × 7 Flexible Cable (MIL-DTL-83420): Consists of 6 outer strands of 7 individual wires wrapped helically around a single 7-wire center core strand (total 49 wires). Characterized by medium flexibility. Used primarily for engine control linkages, trim tab controls, and straight cable runs where pulley bend angles are minimal.
7 × 19 7 \times 19 7 × 19 Extra-Flexible Cable (MIL-DTL-83420): Consists of 6 outer strands of 19 individual wires wrapped helically around a single 19-wire center core strand (total 133 wires). Provides superior fatigue life over small-diameter pulleys. This is the standard cable specified for primary flight controls (ailerons, elevators, rudder).
1 × 19 1 \times 19 1 × 19 Non-Flexible Strand: A single rigid strand of 19 solid wires. Possesses high tensile strength and minimal stretch, but cannot tolerate bending over pulleys. Exclusively used as structural bracing wire, landing gear drag/anti-drag wires, and tie rods .
Cable Metallurgy Comparison
Specification Material Alloy Magnetic Properties Corrosion Resistance Ultimate Tensile Strength
MIL-DTL-83420 Type I Galvanized High-Carbon Steel Strongly Magnetic Moderate (dependent on sacrificial zinc coating; rusts if zinc wears). Baseline ( 100 % 100\% 100% ) (Highest strength)
MIL-DTL-83420 Type II Corrosion-Resistant Steel (CRES / AISI 302/304/305) Non-magnetic to weakly magnetic Superior (ideal for amphibious, seaplane, and agricultural aircraft). ≈ 90 % \approx 90\% ≈ 90% of galvanized steel rating
Standard Cable Diameters & Breaking Strengths (AC 43.13-1B)
Cable Diameter Standard Construction Galvanized Min Breaking Strength CRES Stainless Min Breaking Strength Minimum Recommended Pulley Diameter
1 / 16 " 1/16" 1/16" ( 0.0625 " 0.0625" 0.0625" ) 7 × 7 7 \times 7 7 × 7 480 lbs 480\text{ lbs} 480 lbs 480 lbs 480\text{ lbs} 480 lbs 1.00 " 1.00" 1.00"
3 / 32 " 3/32" 3/32" ( 0.0938 " 0.0938" 0.0938" ) 7 × 7 7 \times 7 7 × 7 920 lbs 920\text{ lbs} 920 lbs 920 lbs 920\text{ lbs} 920 lbs 1.50 " 1.50" 1.50"
1 / 8 " 1/8" 1/8" ( 0.1250 " 0.1250" 0.1250" ) 7 × 19 7 \times 19 7 × 19 2 , 000 lbs 2,000\text{ lbs} 2 , 000 lbs 1 , 760 lbs 1,760\text{ lbs} 1 , 760 lbs 2.00 " 2.00" 2.00"
5 / 32 " 5/32" 5/32" ( 0.1562 " 0.1562" 0.1562" ) 7 × 19 7 \times 19 7 × 19 2 , 800 lbs 2,800\text{ lbs} 2 , 800 lbs 2 , 400 lbs 2,400\text{ lbs} 2 , 400 lbs 2.50 " 2.50" 2.50"
3 / 16 " 3/16" 3/16" ( 0.1875 " 0.1875" 0.1875" ) 7 × 19 7 \times 19 7 × 19 4 , 200 lbs 4,200\text{ lbs} 4 , 200 lbs 3 , 700 lbs 3,700\text{ lbs} 3 , 700 lbs 3.00 " 3.00" 3.00"
1 / 4 " 1/4" 1/4" ( 0.2500 " 0.2500" 0.2500" ) 7 × 19 7 \times 19 7 × 19 7 , 000 lbs 7,000\text{ lbs} 7 , 000 lbs 6 , 400 lbs 6,400\text{ lbs} 6 , 400 lbs 4.00 " 4.00" 4.00"
2. Cable Tension Measurement & Tensiometer Operation
Proper cable tension prevents flight control flutter, excessive deadband (slack), or heavy control friction. CABLE TENSIOMETER 3-POINT BENDING PRINCIPLE:
- Fixed Anvil [A] Fixed Anvil [B]
- ▼ ▼
- ══════════╤═══════════════════════════╤══════════ ◄── Control Cable
- │ ▲ │
- │ │ │
- └───────► [ Riser ] ◄───────┘
- (Plunger Force)
- │
- ▼ Dial Indicator Pointer
- Step-by-Step Tensiometer Operation Procedure
Calibration Check: Place the manufacturer-supplied calibrated test bar across the anvils. Depress the trigger and verify that the dial pointer reads within the master calibration tolerance block.
Riser Selection: Insert the correct interchangeable riser block into the instrument plunger, matched exactly to the cable diameter being inspected (e.g., No. 1 riser for 1 / 16 " 1/16" 1/16" , No. 2 riser for 1 / 8 " 1/8" 1/8" , No. 3 riser for 3 / 16 " 3/16" 3/16" ).
Cable Engagement: Position the tensiometer onto a clear, straight run of cable between two pulleys (at least 6 " 6" 6" away from any pulley, turnbuckle, or fairlead). Squeeze the trigger lever smoothly to retract the plunger, position the cable across the two outer anvils and central riser, and release the trigger gently.
Pointer Lock & Reading: Flip the pointer lock lever to freeze the indicator needle before removing the tool from confined spaces. Record the raw dial reading.
Chart Conversion: Look up the raw dial reading on the specific calibration chart attached to the inside lid of that individual tensiometer's carrying case . Never use a conversion chart from another tensiometer serial number! Conversion charts are calibrated uniquely to that specific tool's internal spring rate.
Exercise & Recheck: Move the cockpit controls through full travel several times to settle the cables around all pulleys, re-pin the controls in neutral, and re-verify cable tension.
3. Temperature Compensation & Rigging Charts
Aircraft control cable tension varies dramatically with changes in ambient environmental temperature. This variation occurs because the coefficient of thermal expansion for aluminum alloy airframe structures is roughly twice that of steel cables. Δ L = L 0 ⋅ α ⋅ Δ T \Delta L = L_0 \cdot \alpha \cdot \Delta T Δ L = L 0 ⋅ α ⋅ Δ T α aluminum (2024) ≈ 23 × 10 − 6 / ∘ C ( 12.8 × 10 − 6 / ∘ F ) \alpha_{\text{aluminum (2024)}} \approx 23 \times 10^{-6}\text{ /}^\circ\text{C} \quad (12.8 \times 10^{-6}\text{ /}^\circ\text{F}) α aluminum (2024) ≈ 23 × 1 0 − 6 / ∘ C ( 12.8 × 1 0 − 6 / ∘ F ) α carbon steel ≈ 11.5 × 10 − 6 / ∘ C ( 6.4 × 10 − 6 / ∘ F ) \alpha_{\text{carbon steel}} \approx 11.5 \times 10^{-6}\text{ /}^\circ\text{C} \quad (6.4 \times 10^{-6}\text{ /}^\circ\text{F}) α carbon steel ≈ 11.5 × 1 0 − 6 / ∘ C ( 6.4 × 1 0 − 6 / ∘ F ) THERMAL EXPANSION MISMATCH (Aluminum Fuselage vs. Steel Cable):
- [ HIGH TEMPERATURE (+100°F) ]
- Aluminum Fuselage Expands Rapidly: ═══════════════════════════════════►
- Steel Cable Expands Slowly: ─────────────────────────►
NET RESULT: Fuselage stretches cable ──► CABLE TENSION INCREASES SHARPLY!
- [ FREEZING TEMPERATURE (0°F) ]
- Aluminum Fuselage Shrinks Rapidly: ◄═══════════════════════════════════
- Steel Cable Shrinks Slowly: ◄─────────────────────────
NET RESULT: Fuselage relaxes cable ──► CABLE TENSION DROPS SHARPLY (SLACK)!
Using Cable Tension vs. Temperature Rigging Charts
Technicians must always rig cables in a shaded hangar using a thermometer placed adjacent to the airframe structure to establish the precise ambient temperature. TYPICAL CABLE TENSION vs. TEMPERATURE RIGGING CHART (1/8" Cable):
- Tension (lbs)
- 120 ┌───────────────────────────────────────────/ ◄── 100°F: ~95 lbs
- 100 │ /─────
- 80 │ /───── ◄──────── 70°F: 70 lbs (Standard Nominal)
- 60 │ /─────
- 40 │ /───── ◄──────────────────── 30°F: ~45 lbs
- 20 └─────────────/─────
- 0°F 20°F 40°F 60°F 80°F 100°F 120°F Ambient Temperature
Rigging Example: An aircraft maintenance manual specifies a nominal rigging tension of 70 lbs ± 5 lbs 70\text{ lbs} \pm 5\text{ lbs} 70 lbs ± 5 lbs at 70 ∘ F 70^\circ\text{F} 7 0 ∘ F for a 1 / 8 " 1/8" 1/8" aileron cable.
If rigging inside a heated hangar at 100 ∘ F 100^\circ\text{F} 10 0 ∘ F , the target tension on the chart increases to 95 lbs 95\text{ lbs} 95 lbs .
If rigging during winter at 30 ∘ F 30^\circ\text{F} 3 0 ∘ F , the target tension decreases to 45 lbs 45\text{ lbs} 45 lbs .
If rigged to 70 lbs 70\text{ lbs} 70 lbs at 100 ∘ F 100^\circ\text{F} 10 0 ∘ F , the cable will become dangerously loose and flutter-prone when flying at altitude in − 40 ∘ F -40^\circ\text{F} − 4 0 ∘ F air.
Automatic Cable Tension Regulators
Large transport category aircraft (e.g., Boeing, Airbus, Lockheed) incorporate automatic cable tension regulators located in the control quadrants. These spring-loaded, hydraulically damped quadrants rotate continuously to take up slack or relieve excess tension as the airframe flexes and undergoes extreme thermal cycles during climb and cruise.
4. Push-Pull Rods, Bellcranks & Mechanical Linkages
Push-pull control rods are rigid structural tubes used to transmit both tension (pulling) and compression (pushing) forces without the backlash or stretch associated with long cable runs. PUSH-PULL TUBE ASSEMBLY & THREAD ENGAGEMENT:
- Witness / Inspection Hole
- │
- ════════════════════════│═════════╤═══════════════════╗
- Push-Pull Tube Fitting ▼ │ Threaded Shank ║ Rod End Eye
- ○ ◄───────┼───────────────────╢ (Heim Bearing)
- ══════════════════════════════════╧═══════════════════╝
- ▲
- Jam Nut (Torqued)
SAFETY WIRE TEST: A piece of safety wire MUST NOT pass through the witness hole!
Push-Pull Rod Inspection & Thread Engagement Standards
Witness / Inspection Hole Rule: Threaded rod ends are fabricated with a small transverse inspection hole in the tube end fitting. Technicians must probe this hole using a fine piece of safety wire ( 0.020 " 0.020" 0.020" diameter):
PASS: The safety wire encounters solid metal and cannot pass through the hole , confirming that the threaded rod end shank extends past the minimum structural safety depth.
FAIL / REJECT: The wire passes completely through the hole. The rod end is under-engaged and subject to thread stripping under flight loads.
Dimensional Engagement Rule: Where no witness hole is provided, the minimum length of threaded shank engaged inside the tube fitting must equal or exceed the outside diameter ( O D OD O D ) of the threaded rod shank ( L engage ≥ D L_{\text{engage}} \ge D L engage ≥ D ). For example, a 3 / 8 " - 24 3/8"\text{-}24 3/8" - 24 rod end must have at least 3 / 8 " 3/8" 3/8" ( 0.375 " 0.375" 0.375" ) of active thread engagement.
Jam Nut Tightening: Jam nuts (check nuts) must be torqued tightly against the tube end fitting to prevent rod rotation and thread fretting. Self-aligning spherical bearings (Heim joints) must rotate freely without binding or excessive axial end-play.
- Bellcranks, Torque Tubes & Quadrants [ Bellcrank (Changes Direction) ] [ Torque Tube (Transmits Rotation) ]
- Pushrod Input Support Bearings
- │ ┌───┐ ┌───┐
- ▼ ══════╡ O ╞═══════╡ O ╞══════
- ┌──────┐ └───┘ └───┘
- │ O ◄─┼── Pivot Bearing ▲ ▲
- └──────┘ │ Torsional Moment │
- │ └─────── ↻ ─────────┘
- └───► Pushrod Output (90° Redirect)
Bellcranks: Triangular or L-shaped mechanical levers pivoting on a central bearing. They change the direction of push-pull motion (e.g., 90 ∘ 90^\circ 9 0 ∘ redirect from fuselage to wing) and alter mechanical advantage (force vs travel ratio) by varying lever arm lengths.
Torque Tubes: Tubular shafts supported by self-aligning bearings that transmit pure torsional/rotary motion across structural spans (e.g., aileron interconnect torque tubes and flap torque shafts).
Control Quadrants: Arc-shaped mechanical pulleys with grooved perimeters that maintain a constant cable radius and linear travel rate throughout the entire angular throw of the control lever.