Study guide
8.2 Line Conventions, Dimensions, Tolerances & Material Symbols
FAA Aviation Mechanic — General AMG
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & AMG Exam Overview
1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam
2 Chapter 2: Maintenance Forms, Records, Publications & Regulations
2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity
3 Chapter 3: Basic Electricity
3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge
4 Chapter 4: Materials & Processes
4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection
5 Chapter 5: Cleaning & Corrosion Control
5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards
6 Chapter 6: Weight & Balance
6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast
7 Chapter 7: Ground Operation, Servicing & Safety
7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention
8 Chapter 8: Aircraft Drawings
8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics
9 Chapter 9: Fluid Lines & Fittings
9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation
10 Chapter 10: Mathematics for Aviation Maintenance
10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions
11 Chapter 11: Physics for Aviation Maintenance
11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement
12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration
13 Chapter 13: Human Factors in Aviation Maintenance
13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism
8.2 Line Conventions, Dimensions, Tolerances & Material Symbols
Key Takeaways Explain This Topic AI
Standardized drawing line types defined in ANSI/ASME Y14.2M convey specific physical boundaries: Visible lines are thick solid lines, Hidden lines are medium dashed lines, Center lines are thin alternating long-short dashed lines, and Cutting Plane lines are extra-thick dashed lines with viewing direction arrows.
Break lines condense drawing views of uniform structural members: Short break lines are thick, jagged freehand lines, while Long break lines are thin ruled lines with periodic sharp zigzags.
Phantom lines (thin alternating one long and two short dashes) identify alternate positions of movable parts (e.g., flaps extended vs. retracted), adjacent mating parts, or repeated features.
Tolerance is the total allowable dimensional variation (Upper Limit minus Lower Limit), whereas Allowance is the intentional, designed difference in dimensions of mating parts at Maximum Material Condition (MMC) that creates clearance or interference fits.
Section lining (cross-hatching) symbols identify specific internal material compositions, including cast iron (standard 45° hatching), aluminum/magnesium (alternating solid and dashed lines), and steel (diagonal cross-grid).
Last updated: August 2026
8.2 Line Conventions, Dimensions, Tolerances & Material Symbols
Every line, symbol, and dimensional callout on an aircraft blueprint conveys precise physical and metallurgical instructions. The Alphabet of Lines establishes distinct line weights and dash patterns to differentiate visible contours, unseen cavities, centers of rotation, section cuts, and dimensional boundaries. Furthermore, aerospace manufacturing demands rigorous control over dimensional variance. Aviation Maintenance Technicians must master line standards, dimensioning methodologies, limit calculations, tolerance stackups, and material section-lining symbols in accordance with FAA-H-8083-30B , ANSI/ASME Y14.2M , and ASME Y14.5 .
1. Standard Aircraft Drawing Line Conventions (The Alphabet of Lines)
Under ANSI/ASME Y14.2M , technical drawings utilize distinct line weights and stroke geometries to establish visual hierarchy and eliminate ambiguity. THE ALPHABET OF LINES IN AVIATION
- 1. Visible / Object Line: ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ (Thick Solid, 0.6 mm)
- 2. Hidden Line: - - - - - - - - - - - - - - - - - - - (Medium Dashed, 0.35 mm)
- 3. Center Line: ━━━━━━━ ━ ━━━━━━━ ━ ━━━━━━━ ━ ━ (Thin Long/Short, 0.25 mm)
- 4. Dimension / Extension Line: │◄────────────── 3.250 ─────────────►│ (Thin Solid with Arrows)
- 5. Leader Line: ─────────┐ (Thin with Arrow / Note)
- ▼ Ø .250 DRILL
- 6. Cutting Plane Line: ━━ ━━ ━━ ━━ ━━ ━━ ━━ ━━ ━━ ━━ ━━ ━━ ━ (Extra Thick, 0.8 mm)
- ▲ ▲
- │ [A] [A] │ (Direction Arrows)
- 7. Short Break Line: ━━━━━/\/\━━━━━/\/\━━━━━/\/\━━━━━━━━━━ (Thick Jagged Freehand)
- 8. Long Break Line: ───────────/\────────────/\────────── (Thin Straight w/ Zigzag)
- 9. Phantom Line: ━━━━━━━ ━ ━ ━━━━━━━ ━ ━ ━━━━━━━ (Thin Long/2 Short Dashes)
- Line Types and Their Technical Functions
Line Type Standard Thickness Visual Appearance Technical Purpose & Rules
Visible / Object Line Thick ( 0.60 mm 0.60\text{ mm} 0.60 mm ) Heavy continuous solid line Represents all visible edges, contours, and physical surface boundaries of an object. Forms the primary outline of the part.
Hidden Line Medium ( 0.35 mm 0.35\text{ mm} 0.35 mm ) Evenly spaced short dashes ( 1 / 8 " 1/8" 1/8" dash, 1 / 32 " 1/32" 1/32" gap) Reveals unseen edges, hidden surfaces, interior bores, or rear contours obscured behind opaque material. Must touch visible lines at points of intersection.
Center Line Thin ( 0.25 mm 0.25\text{ mm} 0.25 mm ) Alternating long dash ( 3 / 4 " − 1.5 " 3/4"-1.5" 3/4" − 1.5" ) and short dash ( 1 / 16 " − 1 / 8 " 1/16"-1/8" 1/16" − 1/8" ) Indicates axes of symmetry, centers of circular holes, pitch circle diameters, and paths of rotational motion. Intersects at short dashes.
Dimension Line Thin ( 0.25 mm 0.25\text{ mm} 0.25 mm ) Fine solid line broken for dimension number Spans the distance being measured, terminating in sharp, filled arrowheads pointing outward against extension lines.
Extension Line Thin ( 0.25 mm 0.25\text{ mm} 0.25 mm ) Fine solid line extending from object profile Extends outward from feature contours to establish dimensional boundaries. Starts with a 1 / 16 inch 1/16\text{ inch} 1/16 inch gap from the object line and extends 1 / 8 inch 1/8\text{ inch} 1/8 inch past the dimension arrowhead.
Leader Line Thin ( 0.25 mm 0.25\text{ mm} 0.25 mm ) Continuous solid line with angled leg and horizontal shoulder Points to a specific hole, surface, or detail to provide notes, drill sizes, ream limits, or part numbers. Terminates in an arrowhead or dot.
Cutting Plane Line Extra Thick ( 0.70 − 0.80 mm 0.70-0.80\text{ mm} 0.70 − 0.80 mm ) Heavy solid line or alternating long dash and pairs of short dashes Defines the imaginary slicing plane for sectional views. Features large 90 ∘ 90^\circ 9 0 ∘ arrowheads at each end indicating the technician's viewing direction, labeled with section letters (e.g., A-A ).
Short Break Line Thick ( 0.60 mm 0.60\text{ mm} 0.60 mm ) Heavy, solid, jagged freehand line Used to break away a small portion of a view to reveal underlying interior features, or to terminate a short view.
Long Break Line Thin ( 0.25 mm 0.25\text{ mm} 0.25 mm ) Ruled straight line with periodic sharp zigzags Used to shorten the drawn view of long, uniform structural components (such as wing spars, control rods, longerons, and torque tubes).
Phantom Line Thin ( 0.25 mm 0.25\text{ mm} 0.25 mm ) Alternating one long dash and two short dashes Shows alternate positions of movable parts (e.g., flap retracted vs. extended), adjacent mating parts not included in assembly, or repeated details.
Stitch Line Thin ( 0.25 mm 0.25\text{ mm} 0.25 mm ) Uniform series of short dashes or dots Indicates sewing paths for fabric-covered surfaces, thermal insulation blankets, or continuous spot-weld lines.
Loading diagram... Drawing Line Hierarchy and Application
2. Dimensioning Standards, Rules & Aircraft Callouts
Dimensioning defines the exact size, geometry, location, and manufacturing criteria of part features. PRECISION AIRCRAFT FEATURE CALLOUTS
1. Chamfer Callout: 2. Countersink Callout (100° Aircraft Flush):
- ┌───────────────┐ ╲ 100° ╱
- │ │ ╲ ╱
- │ .060 X 45°│ │ │ Ø .191 DRILL
- │ │ │ │ ⌵ Ø .350 X 100°
- └───────┬───────┘ └────┘
- └── 45° Chamfer
3. Counterbore Callout: 4. Thread Callout:
- ┌───┐ ┌───┐ .250-28 UNF-3A
- │ │ │ │ Ø .250 DRILL │ │ │ │ └─ A = External (B = Internal)
- │ └──────┘ │ ⌴ Ø .500 │ │ │ └─── Class 3 (Tight Aircraft Fit)
- │ │ │ ↧ .250 DEEP │ │ └─────── Unified Fine Thread
- └──────┴───────┘ │ └─────────── Threads Per Inch (TPI)
- └─────────────── Nominal Major Diameter
- Fractional vs. Decimal Dimensioning
Fractional Dimensions: Used on non-critical assemblies, sheet metal bracket profiles, or structural woodwork where high precision is unnecessary. Standard fractional shop tolerance is typically ± 1 / 32 inch \pm 1/32\text{ inch} ± 1/32 inch or ± 1 / 64 inch \pm 1/64\text{ inch} ± 1/64 inch .
Decimal Dimensions: The universal standard in modern aerospace manufacturing and turbine engine maintenance. Allows precision control to thousandths or ten-thousandths of an inch:
Two-place decimal ( 0. X X 0.XX 0. XX ): Standard tolerance typically ± 0.010 in \pm 0.010\text{ in} ± 0.010 in .
Three-place decimal ( 0. X X X 0.XXX 0. XXX ): Standard tolerance typically ± 0.005 in \pm 0.005\text{ in} ± 0.005 in .
Four-place decimal ( 0. X X X X 0.XXXX 0. XXXX ): Standard tolerance typically ± 0.0005 in \pm 0.0005\text{ in} ± 0.0005 in to ± 0.0002 in \pm 0.0002\text{ in} ± 0.0002 in for bearings, bushings, and hydraulic spool valves.
Baseline vs. Chain (Continuous) Dimensioning
Continuous (Chain) Dimensioning: Dimensions are linked end-to-end in a continuous chain. Danger: Each manufacturing error accumulates, leading to tolerance stackup (tolerance buildup) that can cause misaligned bolt holes.
Baseline (Datum) Dimensioning: All individual dimensions originate from a single, common reference datum edge or baseline. Each feature's tolerance is independent, completely eliminating tolerance buildup across the assembly.
Standard Aerospace Feature Symbols and Callouts
Diameter Symbol ( ∅ \varnothing ∅ ): Precedes all cylindrical dimensions (e.g., Ø .375 ).
Radius Symbol ( R R R ): Designates circular arc radii (e.g., R .125 ).
Countersink Symbol ( ∨ \vee ∨ ): Indicates a conical enlargement for flush fasteners. In aviation, structural rivets utilize a 100 ∘ 100^\circ 10 0 ∘ countersink angle , contrasting with standard commercial/automotive 82 ∘ 82^\circ 8 2 ∘ countersinks.
Counterbore Symbol ( ⊔ \sqcup ⊔ ): Indicates a cylindrical flat-bottomed enlargement to recess socket-head cap screws or bolt heads.
Depth Symbol ( ↓ \downarrow ↓ ): Specifies the depth of a blind hole or counterbore.
Aviation Thread Callout: .250-28 UNF-3A
.250 : Major thread nominal diameter ( 1 / 4 inch 1/4\text{ inch} 1/4 inch or 0.250 " 0.250" 0.250" ).
28 : Threads per inch (pitch count).
UNF : Unified National Fine thread series (standard in aviation fasteners; UNC is coarse).
3 : Class of fit ( Class 1 = loose/utility, Class 2 = commercial, Class 3 = precision aircraft fit, Class 4 = interference fit).
A : External thread (bolts/studs); B indicates internal thread (nuts/tapped holes).
3. Limits, Tolerances, and Allowances
Precision manufacturing requires clear mathematical definitions governing allowable dimensional variation. LIMITS, TOLERANCE, AND ALLOWANCE
- HOLE (Minimum Material: 1.505" | Maximum Material MMC: 1.500")
- ┌─────────────────────────────────────────────────────────────┐
- │ TOLERANCE = 0.005" │
- │◄───────────────────────────────────────────────────────────►│
- │ Lower Limit: 1.500" │ Upper Limit: 1.505" │
- └─────────────────────────────────────────────────────────────┘
- │◄─ POSITIVE ALLOWANCE ─►│
- ┌─────────────────────────────────┼───────────────────────┐│
- │ Lower Limit: 1.496" │ Upper Limit: 1.498" ││
- │◄───────────────────────────────────────────────────────►││
- │ TOLERANCE = 0.002" ││
- └─────────────────────────────────────────────────────────┴┘
- SHAFT (Maximum Material MMC: 1.498" | Minimum Material: 1.496")
- Definitions and Mathematical Relationships
Nominal Dimension: The standard basic design size from which all limits and variations are calculated (e.g., 2.500 in 2.500\text{ in} 2.500 in ).
Limits: The extreme maximum (upper limit) and minimum (lower limit) permissible dimensions of a finished part. Upper Limit = Nominal + Positive Deviation \text{Upper Limit} = \text{Nominal} + \text{Positive Deviation} Upper Limit = Nominal + Positive Deviation Lower Limit = Nominal − Negative Deviation \text{Lower Limit} = \text{Nominal} - \text{Negative Deviation} Lower Limit = Nominal − Negative Deviation
Tolerance: The total allowable variation of a single part dimension. It is the absolute difference between the upper limit and the lower limit: Tolerance = Upper Limit − Lower Limit \text{Tolerance} = \text{Upper Limit} - \text{Lower Limit} Tolerance = Upper Limit − Lower Limit
Unilateral Tolerance: Variation is permitted in only one direction from the nominal size (e.g., 1.750 " + 0.004 − 0.000 1.750" \substack{+0.004 \\ -0.000} 1.750" + 0.004 − 0.000 or 2.000 " + 0.000 − 0.003 2.000" \substack{+0.000 \\ -0.003} 2.000" + 0.000 − 0.003 ). The tolerance equals the single non-zero deviation.
Bilateral Tolerance: Variation is permitted in both plus and minus directions from the nominal size (e.g., 1.500 ± 0.005 " 1.500 \pm 0.005" 1.500 ± 0.005" [equal bilateral, tolerance = 0.010 " \text{tolerance} = 0.010" tolerance = 0.010" ] or 3.000 " + 0.005 − 0.002 3.000" \substack{+0.005 \\ -0.002} 3.000" + 0.005 − 0.002 [unequal bilateral, tolerance = 0.007 " \text{tolerance} = 0.007" tolerance = 0.007" ]).
Allowance: The intentional, designed difference in the dimensions of two mating parts (such as a shaft and a bearing bore) at Maximum Material Condition (MMC) . Allowance determines the tightest possible fit between mating components: Allowance = Smallest Hole (Hole Lower Limit) − Largest Shaft (Shaft Upper Limit) \text{Allowance} = \text{Smallest Hole (Hole Lower Limit)} - \text{Largest Shaft (Shaft Upper Limit)} Allowance = Smallest Hole (Hole Lower Limit) − Largest Shaft (Shaft Upper Limit)
Classes of Mating Fits CLASSIFICATION OF MATING FITS
1. CLEARANCE FIT: 2. INTERFERENCE FIT (Press Fit): 3. TRANSITION FIT:
- Shaft < Hole Shaft > Hole (Negative Allowance) Tolerance zones overlap
- ┌──────────────┐ ┌──────────────┐ ┌──────────────┐
- │ Hole Bore │ │ Hole Bore │ │ Hole Bore │
- │ ┌──────────┐ │ │┌────────────┐│ │ ┌──────────┐ │
- │ │ Shaft │ │ ││/// Shaft //││ │ │ Shaft │ │
- │ └──────────┘ │ │└────────────┘│ │ └──────────┘ │
- └──────────────┘ └──────────────┘ └──────────────┘
- Always positive gap Requires thermal shrink/press May be loose or tight
Clearance Fit (Positive Allowance): The internal shaft is always smaller than the external hole under all permissible manufacturing limits. Guarantees running or sliding clearance for rotating shafts, hinges, and control pulleys.
Interference Fit / Press Fit (Negative Allowance): The internal mating part is intentionally manufactured larger than the hole. Assembly requires mechanical force (hydraulic arbor press), thermal expansion of the housing (heating in an oven), or thermal contraction of the insert (submerging in liquid nitrogen / dry ice). Used for bronze bushings in landing gear trunnions and steel valve guides in aluminum cylinder heads.
Transition Fit: The tolerance bands of the mating hole and shaft overlap. Depending on the individual parts selected during assembly, the resulting fit may be either a very slight clearance or a slight interference.
4. Material Cross-Hatching Symbols (Section Lining)
In sectional drawings, the internal solid material sliced by the cutting plane is highlighted using section lines (cross-hatching) . Standardized cross-hatch patterns defined in ANSI/ASME Y14.2M visually identify the specific metallurgical composition of the component. MATERIAL SECTION LINING SYMBOLS
1. CAST IRON (General Symbol): 2. ALUMINUM & MAGNESIUM: 3. STEEL & WROUGHT METALS:
- ┌──────────────────┐ ┌──────────────────┐ ┌──────────────────┐
- │ //////////////// │ │ / / / / / / / / │ │ ╳╳╳╳╳╳╳╳╳╳╳╳╳╳╳╳ │
- │ //////////////// │ │ - - - - - - - - │ │ ╳╳╳╳╳╳╳╳╳╳╳╳╳╳╳╳ │
- │ //////////////// │ │ / / / / / / / / │ │ ╳╳╳╳╳╳╳╳╳╳╳╳╳╳╳╳ │
- └──────────────────┘ └──────────────────┘ └──────────────────┘
- Single continuous 45° lines Solid line + dashed line Crisscrossed 45° grid
4. BRASS, BRONZE & COPPER: 5. RUBBER, PLASTIC & INSUL: 6. FLUIDS & LIQUIDS:
- ┌──────────────────┐ ┌──────────────────┐ ┌──────────────────┐
- │ // // // // // //│ │ ╱ ╱ ╱ ╱ ╱ ╱ ╱ ╱ │ │ ~~~~~~~~~~~~~~~~ │
- │ // // // // // //│ │ ╱ ╱ ╱ ╱ ╱ ╱ ╱ ╱ │ │ ~~~~~~~~~~~~~~~~ │
- │ // // // // // //│ │ ╱ ╱ ╱ ╱ ╱ ╱ ╱ ╱ │ │ ~~~~~~~~~~~~~~~~ │
- └──────────────────┘ └──────────────────┘ └──────────────────┘
- Pairs of solid lines / ticks Evenly spaced 30° / 60° Horizontal wavy lines
- Material Hatching Reference Matrix
Material Classification Cross-Hatch Pattern Appearance Aerospace Application Examples
Cast Iron Evenly spaced single continuous diagonal lines at 45 ∘ 45^\circ 4 5 ∘ . (Universal default section symbol for all materials if not specified). Piston engine cylinder sleeves, brake rotors.
Aluminum, Magnesium & Alloys Alternating continuous solid diagonal line and parallel dashed line at 45 ∘ 45^\circ 4 5 ∘ . Aircraft wing skins, ribs, fuselage bulkheads, gearboxes.
Steel & Wrought Alloys Crisscrossed diagonal grid (cross-hatching) forming fine diamonds at 45 ∘ 45^\circ 4 5 ∘ . Landing gear barrels, engine crankshafts, wing attach bolts.
Bronze, Brass & Copper Solid diagonal line alternating with short dashed tick marks (or paired lines). Flanged sleeve bushings, electrical terminals, valve seats.
Rubber, Plastic & Insulators Fine diagonal lines at 30 ∘ 30^\circ 3 0 ∘ or 60 ∘ 60^\circ 6 0 ∘ , or stippled diamond grid. Hydraulic O-rings, radomes, electrical conduit, seals.
Wood (Across vs With Grain) Concentric growth rings across grain; parallel undulating lines along grain. Wood spars, composite core rib assemblies.
Fluids / Liquids Horizontal series of continuous wavy lines . Hydraulic reservoirs, fuel cell cross-sections.
- 5. Worked Numerical Examples: Limits, Tolerances & Allowance Calculations
- Example 1: Bushing Bore and Landing Gear Trunnion Fit Analysis
Problem: A maintenance drawing for a main landing gear trunnion specifies the following dimensions for a steel housing bore and a press-fit bronze bushing:
Housing Bore Diameter: 1.8750 " + 0.0010 − 0.0000 1.8750" \substack{+0.0010 \\ -0.0000} 1.8750" + 0.0010 − 0.0000
Bushing Outer Diameter (OD): 1.8775 " + 0.0008 − 0.0002 1.8775" \substack{+0.0008 \\ -0.0002} 1.8775" + 0.0008 − 0.0002
Calculate the limits of the bore, limits of the bushing OD, tolerance of each part, the engineering allowance, and the maximum/minimum interference.
Step-by-Step Mathematical Solution:
Determine Housing Bore Limits and Tolerance: Bore Upper Limit = 1.8750 + 0.0010 = 1.8760 inches \text{Bore Upper Limit} = 1.8750 + 0.0010 = 1.8760\text{ inches} Bore Upper Limit = 1.8750 + 0.0010 = 1.8760 inches Bore Lower Limit = 1.8750 − 0.0000 = 1.8750 inches \text{Bore Lower Limit} = 1.8750 - 0.0000 = 1.8750\text{ inches} Bore Lower Limit = 1.8750 − 0.0000 = 1.8750 inches Bore Tolerance = 1.8760 − 1.8750 = 0.0010 inches \text{Bore Tolerance} = 1.8760 - 1.8750 = 0.0010\text{ inches} Bore Tolerance = 1.8760 − 1.8750 = 0.0010 inches
Determine Bushing Outer Diameter Limits and Tolerance: Bushing Upper Limit = 1.8775 + 0.0008 = 1.8783 inches \text{Bushing Upper Limit} = 1.8775 + 0.0008 = 1.8783\text{ inches} Bushing Upper Limit = 1.8775 + 0.0008 = 1.8783 inches Bushing Lower Limit = 1.8775 − 0.0002 = 1.8773 inches \text{Bushing Lower Limit} = 1.8775 - 0.0002 = 1.8773\text{ inches} Bushing Lower Limit = 1.8775 − 0.0002 = 1.8773 inches Bushing Tolerance = 1.8783 − 1.8773 = 0.0010 inches \text{Bushing Tolerance} = 1.8783 - 1.8773 = 0.0010\text{ inches} Bushing Tolerance = 1.8783 − 1.8773 = 0.0010 inches
Calculate Allowance (at Maximum Material Condition - MMC): Smallest Bore (Hole Lower Limit) = 1.8750 in \text{Smallest Bore (Hole Lower Limit)} = 1.8750\text{ in} Smallest Bore (Hole Lower Limit) = 1.8750 in Largest Bushing (Shaft Upper Limit) = 1.8783 in \text{Largest Bushing (Shaft Upper Limit)} = 1.8783\text{ in} Largest Bushing (Shaft Upper Limit) = 1.8783 in Allowance = 1.8750 − 1.8783 = − 0.0033 inches ( Negative Allowance = Interference Fit ) \text{Allowance} = 1.8750 - 1.8783 = -0.0033\text{ inches} \quad (\text{Negative Allowance} = \text{Interference Fit}) Allowance = 1.8750 − 1.8783 = − 0.0033 inches ( Negative Allowance = Interference Fit )
Calculate Maximum and Minimum Fit Boundaries: Maximum Interference (Tightest Fit) = 1.8783 in − 1.8750 in = 0.0033 inches (interference) \text{Maximum Interference (Tightest Fit)} = 1.8783\text{ in} - 1.8750\text{ in} = 0.0033\text{ inches (interference)} Maximum Interference (Tightest Fit) = 1.8783 in − 1.8750 in = 0.0033 inches (interference) Minimum Interference (Loosest Fit) = 1.8773 in − 1.8760 in = 0.0013 inches (interference) \text{Minimum Interference (Loosest Fit)} = 1.8773\text{ in} - 1.8760\text{ in} = 0.0013\text{ inches (interference)} Minimum Interference (Loosest Fit) = 1.8773 in − 1.8760 in = 0.0013 inches (interference)
Conclusion: The assembly is a guaranteed interference fit (tight press fit) ranging from 0.0013 in 0.0013\text{ in} 0.0013 in to 0.0033 in 0.0033\text{ in} 0.0033 in , requiring liquid nitrogen freezing of the bushing and oven heating of the trunnion for installation.
Example 2: Tolerance Stackup Comparison: Chain vs. Baseline Dimensioning
Problem: An aircraft sheet metal hinge bracket contains four consecutive attachment holes spaced across a beam. Each hole spacing has a nominal dimension of 2.000 inches 2.000\text{ inches} 2.000 inches with a manufacturing tolerance of ± 0.015 inches \pm 0.015\text{ inches} ± 0.015 inches .
Case A: The holes are dimensioned using Continuous (Chain) Dimensioning .
Case B: The holes are dimensioned using Baseline Dimensioning from the bracket's left reference edge.
What is the maximum possible location error for the fourth hole in both cases?
Mathematical Solution:
Case A (Chain Dimensioning): Total Tolerance Stackup = ± 0.015 + ± 0.015 + ± 0.015 + ± 0.015 = ± 0.060 inches \text{Total Tolerance Stackup} = \pm 0.015 + \pm 0.015 + \pm 0.015 + \pm 0.015 = \pm 0.060\text{ inches} Total Tolerance Stackup = ± 0.015 + ± 0.015 + ± 0.015 + ± 0.015 = ± 0.060 inches
The cumulative error can vary by as much as 0.060 inches 0.060\text{ inches} 0.060 inches ( 1 / 16 in 1/16\text{ in} 1/16 in ), causing structural fastener misalignment. 2. Case B (Baseline Dimensioning): Fourth Hole Position from Datum = 8.000 ± 0.015 inches \text{Fourth Hole Position from Datum} = 8.000 \pm 0.015\text{ inches} Fourth Hole Position from Datum = 8.000 ± 0.015 inches Maximum Location Error = ± 0.015 inches \text{Maximum Location Error} = \pm 0.015\text{ inches} Maximum Location Error = ± 0.015 inches
Conclusion: Baseline dimensioning isolates each hole, reducing maximum location error by 75 % 75\% 75% (from ± 0.060 " \pm 0.060" ± 0.060" down to ± 0.015 " \pm 0.015" ± 0.015" ).