Study guide

7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids)

FAA Aviation Mechanic — General AMG

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & AMG Exam Overview

1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam

2 Chapter 2: Maintenance Forms, Records, Publications & Regulations

2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity

3 Chapter 3: Basic Electricity

3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge

4 Chapter 4: Materials & Processes

4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection

5 Chapter 5: Cleaning & Corrosion Control

5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards

6 Chapter 6: Weight & Balance

6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast

7 Chapter 7: Ground Operation, Servicing & Safety

7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention

8 Chapter 8: Aircraft Drawings

8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics

9 Chapter 9: Fluid Lines & Fittings

9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation

10 Chapter 10: Mathematics for Aviation Maintenance

10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions

11 Chapter 11: Physics for Aviation Maintenance

11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices

12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement

12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration

13 Chapter 13: Human Factors in Aviation Maintenance

13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism

7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids)

Key Takeaways Explain This Topic AI

Aviator's Breathing Oxygen (MIL-PRF-27210) must be 99.5%+ pure anhydrous oxygen; medical and industrial oxygen are strictly prohibited because moisture freezes in high-altitude regulators, causing total system failure.

Oxygen servicing requires slow cascade cylinder charging to prevent adiabatic compression heating (which generates temperatures >1,000°F) and strict isolation from hydrocarbon greases and oils to avoid spontaneous explosive detonation.

Hydraulic fluids must never be cross-contaminated: mineral-based MIL-PRF-5606 (red) uses nitrile/Buna-N seals, while phosphate-ester Skydrol (purple) requires EPDM/butyl seals; pressurized reservoirs must be depressurized before servicing.

Landing gear oleo struts and accumulators must be serviced exclusively with dry gaseous nitrogen (MIL-PRF-27401); compressed shop air and pure oxygen are strictly banned to prevent catastrophic diesel compression explosions.

Ground de-icing utilizes heated SAE Type I fluid (140-180°F) to melt and flush frozen contaminants, followed by unheated SAE Type II/IV anti-icing fluid to provide holdover protection under the Clean Aircraft Concept.

Last updated: August 2026

7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids)

Aircraft ground servicing encompasses the routine replenishment of operational consumables essential for flight safety: gaseous breathing oxygen, hydraulic power transmission fluids, high-pressure nitrogen for landing gear shock struts, and ground de-icing/anti-icing chemical fluids. Servicing errors—such as introducing improper fluid grades, allowing moisture into breathing oxygen systems, mixing incompatible hydraulic elastomers, or utilizing compressed air instead of nitrogen—can induce instantaneous catastrophic mechanical failure, high-altitude crew hypoxia, in-flight fires, or ground explosions.

Technicians must strictly adhere to the standards outlined in FAA-H-8083-30B , 14 CFR Part 91/121/135 , Military Specifications (MIL-SPEC) , SAE Aerospace Standards , and aircraft manufacturer maintenance manuals.

1. Aviation Gaseous Breathing Oxygen Servicing

Aviation oxygen systems supply high-purity breathing oxygen to flight crews and passengers operating at high altitudes where ambient atmospheric pressure is insufficient to maintain arterial oxygen saturation. OXYGEN SPECIFICATIONS & PURITY REQUIREMENTS

  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ MIL-PRF-27210 / AVIATOR'S BREATHING OXYGEN (ABO) - GRADE A GASEOUS │
  • │ • Purity: 99.5% minimum pure dry oxygen by volume │
  • │ • Water Vapor: Max 0.005 mg/L (<5 ppm), Dew Point <= -65°F (-54°C) │
  • │ • Contaminants: Zero hydrocarbons, zero toxic compounds, odorless │
  • └────────────────────────────────────────────────────────────────────────┘
  • ▲ ▲
  • │ PROHIBITED IN AIRCRAFT │ PROHIBITED IN AIRCRAFT
  • ┌──────┴──────────────────────────┐ ┌──────┴──────────────────────────┐
  • │ MEDICAL OXYGEN (USP) │ │ INDUSTRIAL OXYGEN │
  • │ • Contains 10-20 mg/L moisture │ │ • Used for welding / cutting │
  • │ • Keeps patient lungs hydrated │ │ • Contains moisture, toxic CO, │
  • │ • FREEZES SOLID IN COLD │ │ hydrocarbons, particulate grit│
  • │ REGULATORS AT HIGH ALTITUDE! │ │ • Severe toxicity & fire hazard │
  • └─────────────────────────────────┘ └─────────────────────────────────┘
  • Aviator's Breathing Oxygen (ABO) Specifications

Standard: MIL-PRF-27210 (Aviator's Breathing Oxygen, Grade A Gaseous) or MIL-PRF-27210 Grade B Liquid (LOX) .

Purity Standard: Minimum 99.5 % 99.5\% 99.5% pure anhydrous oxygen by volume.

Moisture Threshold: Water vapor content must not exceed 0.005 mg per liter 0.005\text{ mg per liter} 0.005 mg per liter of gas at standard temperature and pressure (equivalent to a maximum dew point of − 65 ∘ F / − 54 ∘ C -65^\circ\text{F} / -54^\circ\text{C} − 6 5 ∘ F / − 5 4 ∘ C ).

Why Medical Oxygen is Strictly Prohibited: Medical oxygen (USP) is formulated for ground medical applications and deliberately contains moisture ( 10 – 20 mg/L 10–20\text{ mg/L} 10–20 mg/L ) to prevent drying out patient mucous membranes. At cruising flight altitudes (where ambient temperatures drop to − 40 ∘ F -40^\circ\text{F} − 4 0 ∘ F to − 65 ∘ F -65^\circ\text{F} − 6 5 ∘ F ), entrained water vapor in medical oxygen freezes into solid ice crystals inside narrow regulator orifices, reducing valves, and demand flow meters. This completely blocks oxygen flow, causing catastrophic, rapid hypoxia in flight crews.

Why Industrial Oxygen is Prohibited: Industrial oxygen contains moisture, trace toxic carbon monoxide, gaseous hydrocarbons, and abrasive slag particles that poison personnel and damage regulators.

The Cascade Charging Procedure

Aircraft high-pressure oxygen cylinders ( 1 , 800 – 2 , 000 psi 1,800–2,000\text{ psi} 1 , 800–2 , 000 psi ) are recharged from a ground servicing cart containing a bank (manifold) of three to six high-pressure supply cylinders.

Cascade Principle: Always service from the lowest-pressure supply cylinder first that exceeds the aircraft cylinder pressure, allowing pressures to equalize. Close that valve, and open the next higher-pressure supply cylinder in sequence. Conclude with the highest-pressure supply cylinder to top off the aircraft system to certified placard pressure. This protocol maximizes the usable gas volume extracted from each supply cylinder.

Adiabatic Compression Heating & Fire Hazards

When high-pressure oxygen is admitted rapidly into an empty line or closed manifold, the gas rushing downstream compresses against closed fittings or regulator seats with extreme velocity.

Thermodynamic Mechanism: This rapid, sudden compression is adiabatic (no heat is transferred to the surrounding environment). The kinetic energy of compression generates instantaneous temperatures exceeding 1 , 000 ∘ F– 1 , 800 ∘ F ( 538 ∘ – 982 ∘ C ) 1,000^\circ\text{F}–1,800^\circ\text{F} (538^\circ–982^\circ\text{C}) 1 , 00 0 ∘ F –1 , 80 0 ∘ F ( 53 8 ∘ –98 2 ∘ C ) in a fraction of a second.

Auto-Ignition: In a 100 % 100\% 100% pure oxygen environment at 2 , 000 psi 2,000\text{ psi} 2 , 000 psi , these temperatures instantly exceed the auto-ignition threshold of valve seats, O-rings, and aluminum line walls, causing explosive burn-through and flash fires.

Mandatory Operating Rule: Oxygen service valves must ALWAYS be opened extremely slowly ("cracked") to allow gradual pressure equalization and prevent adiabatic heat spikes.

Hydrocarbon Contamination Hazard

Spontaneous Detonation: Pure oxygen under pressure acts as an aggressive oxidizer. If pure oxygen comes into contact with petroleum grease, hydrocarbon lubricating oil, fuel, hydraulic fluid, oily shop rags, or greasy hands , the hydrocarbon auto-ignites spontaneously and detonates with violent explosive force without any external spark or flame.

Handling Mandates:

Technicians must have thoroughly washed, clean hands or wear clean, lint-free cotton gloves.

Tools used for oxygen servicing must be degreased, sterilized, and stored in dedicated sealed pouches labeled "OXYGEN SERVICE ONLY."

Use only approved fluorocarbon thread sealants (MIL-T-27730 PTFE tape or Krytox fluorinated lubricants). Standard pipe dope and petroleum thread lubricants are strictly forbidden.

Loading diagram... Oxygen Cascade Servicing Protocol and Valve Throttling Sequence

2. Aircraft Hydraulic System Servicing

Aviation hydraulic systems operate at high pressures ( 3 , 000 – 5 , 000 psi 3,000–5,000\text{ psi} 3 , 000–5 , 000 psi ) to actuate landing gear, flight control surfaces, thrust reversers, and wheel brakes. Servicing requires strict adherence to fluid compatibility standards.

Hydraulic Fluid Classifications & Physical Properties

Fluid Category Military / Industry Specification Color Identification Chemical Base Compatible Elastomer / Seal Material Flash Point & Fire Resistance

Mineral-Based MIL-PRF-5606 (NATO H-515) Dyed RED Petroleum base (refined kerosene fraction) Synthetic Nitrile Rubber ( Buna-N ), Neoprene Flash point ≈ 200 ∘ F ( 93 ∘ C ) \approx 200^\circ\text{F} (93^\circ\text{C}) ≈ 20 0 ∘ F ( 9 3 ∘ C ) . Flammable; burns aggressively when misted.

Synthetic Hydrocarbon MIL-PRF-83282 Dyed RED Polyalphaolefin (PAO) synthetic base Synthetic Nitrile Rubber ( Buna-N ), Viton Flash point > 400 ∘ F ( 204 ∘ C ) >400^\circ\text{F} (204^\circ\text{C}) > 40 0 ∘ F ( 20 4 ∘ C ) . High flame resistance; backward compatible with 5606.

Phosphate Ester Skydrol 500B-4, Skydrol LD-4, HyJet IV-A+ (BMS 3-11) Dyed PURPLE (amber/violet when aged) Synthetic phosphate ester Ethylene Propylene Diene Monomer (EPDM) , Butyl Rubber, PTFE Auto-ignition temp > 900 ∘ F ( 482 ∘ C ) >900^\circ\text{F} (482^\circ\text{C}) > 90 0 ∘ F ( 48 2 ∘ C ) . Extremely fire resistant; incompatible with minerals.

Cross-Contamination & Seal Destruction

Incompatibility: Mineral-based fluids (MIL-PRF-5606) and phosphate-ester fluids (Skydrol) are completely incompatible chemically and mechanically.

Mechanism of Failure:

If MIL-PRF-5606 petroleum fluid is inadvertently introduced into a Skydrol system, the mineral oil attacks the EPDM / butyl rubber seals , causing them to soften, swell to several times their normal volume, become gummy, and blow out under pressure.

If Skydrol fluid is added to a 5606 system, the phosphate ester dissolves the nitrile / Buna-N seals , disintegrating them into black particulate sludge that clogs servovalves and causes total hydraulic pressure loss.

Rule: Never mix hydraulic fluids, service carts, dispensing guns, or funnels. Use dedicated, clearly labeled servicing equipment for each fluid type.

Pressurized Hydraulic Reservoir Servicing

In modern transport aircraft, hydraulic reservoirs are pressurized ( 25 – 50 psi 25–50\text{ psi} 25–50 psi ) with engine bleed air or regulated nitrogen to prevent hydraulic pump cavitation during high-altitude operations and steep pitch attitudes.

Depressurization Requirement: Technicians MUST manually depressurize the reservoir using the manual air bleed valve BEFORE removing the reservoir fill cap or opening servicing connections.

Ejection Hazard: Opening a pressurized reservoir causes the sudden, explosive ejection of hydraulic fluid, creating a severe projectile and chemical splash hazard for ground personnel.

Personal Safety & Phosphate Ester (Skydrol) Exposure

Health Hazards: Phosphate ester hydraulic fluid is a severe mucous membrane and eye irritant. In contact with the human eye, it causes excruciating pain, intense tearing, and temporary corneal inflammation.

Mandatory PPE: Safety goggles with full chemical splash side-shields, face shield, impervious butyl rubber gloves , and a chemical-resistant vinyl/butyl apron.

Emergency First Aid for Eye Exposure:

Immediately flush the open eyes with copious quantities of clean, low-pressure tap water or sterile buffered ophthalmic eyewash for at least 15 minutes .

Do not rub the eyes.

If prescribed in the facility safety protocol, apply an approved buffered ophthalmic solution (such as Skydrol Eyewash ) and seek medical evaluation.

3. Pneumatic System Servicing (Shock Struts & Accumulators)

Aircraft pneumatic systems utilize compressed gases to charge landing gear oleo shock struts, hydraulic system accumulators, emergency blow-down bottles, and pneumatic de-icing systems. OLEO-PNEUMATIC SHOCK STRUT CROSS-SECTION & CHARGING

  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ UPPER STRUT CYLINDER │
  • │ │
  • │ [ High-Pressure Schrader Valve (Servicing Port) ] │
  • │ │ │
  • │ ▼ │
  • │ NITROGEN GAS CHARGE (MIL-PRF-27401) │
  • │ • Non-flammable, moisture-free │
  • │ • Elastic Spring for taxiing and ground loads │
  • │ │
  • │ ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │
  • │ ░░░░░░░░░░░░░░ HYDRAULIC FLUID (MIL-PRF-5606) ░░░░░░░░░░░░░░░░░░░░░░░░ │
  • │ ░░░░░░░░░░░░░░ • Dampens kinetic landing impact forces ░░░░░░░░░░░░░░░ │
  • │ │
  • │ [ Metering Pin & Orifice ] │
  • │ │
  • │ LOWER STRUT PISTON │
  • │ (Exposed Chrome Extension Dimension) │
  • │ │ │
  • │ ▼ │
  • │ To Wheel Axle Assembly │
  • └────────────────────────────────────────────────────────────────────────┘
  • Oleo Shock Strut Operating Principles

An oleo-pneumatic shock strut absorbs and dissipates the severe kinetic energy of landing touchdown through fluid friction and provides elastic springing for ground taxi maneuvers:

Hydraulic Phase (Landing Impact): As the aircraft touches down, the lower piston slides upward into the upper cylinder, forcing hydraulic fluid through a narrow annular orifice controlled by a tapered metering pin. Fluid friction dissipates the landing kinetic energy as heat.

Pneumatic Phase (Taxi Spring): As the piston strokes upward, the trapped gas column in the upper cylinder is compressed. This compressed gas acts as a pneumatic spring that supports the weight of the aircraft during ground taxiing and dampens runway bumps.

Strict Ban on Compressed Shop Air and Oxygen (The Diesel Explosion Hazard)

Specification Requirement: Oleo shock struts, high-pressure accumulators, and aircraft tire assemblies must be charged EXCLUSIVELY with dry gaseous Nitrogen (MIL-PRF-27401, Grade A or B) .

THE DIESEL EFFECT (CATASTROPHIC HAZARD):

Never use compressed shop air (which contains 21 % 21\% 21% oxygen) or pure oxygen to service shock struts or tires!

Mechanism: During a hard landing touchdown, high-speed taxiing, or heavy brake application, the shock strut piston strokes upward with violent velocity, compressing the internal gas column in milliseconds. If oxygen or shop air is present in contact with the misted petroleum hydraulic fluid (MIL-PRF-5606), the rapid adiabatic compression generates temperatures exceeding the auto-ignition point of the fluid (the identical physical principle of a diesel engine cylinder).

Result: The hydraulic fluid detonates with explosive violence, shattering the high-strength steel shock strut cylinder into high-velocity shrapnel that penetrates the wing, fuel tanks, and fuselage.

Benefits of Nitrogen: Pure dry nitrogen is chemically inert, non-flammable, free of moisture (preventing internal cylinder wall corrosion and sub-zero freezing), and maintains stable pressure under extreme temperature variations.

Shock Strut Servicing Procedures

Inspection: Measure the exposed chrome extension dimension of the lower piston strut with the aircraft resting on level ground under normal static weight.

Deflation Safety: If servicing is required, the technician must depressurize the strut by attaching an approved strut deflator valve or turning the high-pressure Schrader valve fitting slowly counter-clockwise 1/2 to 1 turn to vent residual nitrogen before removing the valve core. Never loosen valve fittings under pressure!

Charging: Connect a certified nitrogen service cart equipped with a high-pressure regulator, shutoff valve, calibrated gauge, and pressure relief valve. Charge the strut until the exposed chrome piston reaches the precise dimension specified on the aircraft's landing gear instruction placard.

4. Aircraft Ground De-Icing & Anti-Icing Operations

Operating in cold weather environments requires strict compliance with the Clean Aircraft Concept established by 14 CFR § 91.527 , 14 CFR § 121.629 , and 14 CFR § 135.227 .

The Clean Aircraft Concept

Regulatory Rule: No pilot or technician may release or take off an aircraft that has frost, ice, snow, or slush adhering to any wing, control surface, horizontal stabilizer, vertical fin, engine inlet, or pitot-static sensor probe.

Aerodynamic Degradation: Even a microscopic layer of surface frost or roughness (equivalent to medium-grit sandpaper) disrupts laminar airflow over the wing leading edge, reducing wing lift by up to 30 % 30\% 30% and increasing aerodynamic drag by over 40 % 40\% 40% , leading to premature stall during takeoff rotation.

  • SAE Aerospace De-Icing and Anti-Icing Fluid Classifications SAE GROUND DE-ICING & ANTI-ICING FLUID TYPES
  • ┌─────────────────────────────────┼─────────────────────────────────┐
  • │ │ │
  • ▼ ▼ ▼
  • SAE TYPE I (DE-ICING) SAE TYPE II / IV (ANTI-ICING) SAE TYPE III (ANTI-ICING)
  • Color: ORANGE / RED • Color: Type II (Straw/Pale Yell)• Color: BRIGHT YELLOW
  • Newtonian (Unthickened) Type IV (EMERALD GREEN) • Pseudoplastic thickened
  • Applied HOT (140°F - 180°F) • Non-Newtonian (Pseudoplastic) • Formulated for commuter
  • under high pressure • Applied COLD/UNHEATED onto clean aircraft with rotation
  • Function: Melts & flushes away surfaces to provide HOLDOVER speeds < 100 knots
  • snow, ice, and frost • Shears off wing at > 100 kts • Shears off at lower speeds
  • Holdover Time: Very short rotation speed during takeoff • Holdover Time: Intermediate
  • (typically 3 to 15 minutes) • Holdover Time: Extended
  • Detailed Fluid Specifications & Holdover Times (HOT)

SAE Fluid Classification Fluid Color Coding Viscosity & Rheological Behavior Application Temperature & Method Primary Function & Takeoff Behavior Typical Holdover Time (HOT) Range

SAE Type I Orange or Red (clear in legacy) Newtonian (unthickened, low viscosity; viscosity is independent of shear rate). Applied HOT ( 140 ∘ F– 180 ∘ F / 60 ∘ – 82 ∘ C 140^\circ\text{F}–180^\circ\text{F} / 60^\circ–82^\circ\text{C} 14 0 ∘ F –18 0 ∘ F /6 0 ∘ –8 2 ∘ C ) under high nozzle pressure. De-icing: Melts and physically blasts away accumulated snow, ice, and frost. Flows off surfaces rapidly. Very Short: 3 to 15 minutes in light freezing precipitation.

SAE Type II Straw / Pale Yellow / Clear Non-Newtonian (Pseudoplastic) ; contains polymeric thickeners forming a gel blanket. Applied COLD / UNHEATED (or heated as one-step) without high-pressure shearing. Anti-icing: Clings to clean surfaces to prevent freezing accumulation. Thins and shears off wing during takeoff roll at speeds > 100 knots >100\text{ knots} > 100 knots . Moderate: 30 to 45 minutes in light freezing precipitation.

SAE Type III Bright Yellow Pseudoplastic thickened fluid engineered with lower shear threshold. Applied COLD / UNHEATED onto clean aerodynamic surfaces. Anti-icing for Regional Aircraft: Engineered specifically for aircraft with slower takeoff rotation speeds ( < 100 knots <100\text{ knots} < 100 knots , e.g., turboprops). Intermediate: 20 to 35 minutes in light freezing precipitation.

SAE Type IV Emerald Green Advanced Pseudoplastic with high-molecular-weight thickeners. Applied COLD / UNHEATED as the second step over clean surfaces. Anti-icing for Jet Transports: Maximum holdover capability. Clings in heavy freezing rain/snow; shears cleanly off wing at speeds > 100 knots >100\text{ knots} > 100 knots . Maximum / Extended: 45 to 80+ minutes depending on precipitation intensity.

The Standard Two-Step Deicing / Anti-Icing Procedure

Step 1 (De-Icing): Apply heated SAE Type I fluid ( 140 ∘ F– 180 ∘ F 140^\circ\text{F}–180^\circ\text{F} 14 0 ∘ F –18 0 ∘ F ) under high pressure directly to wings, stabilizers, and fuselage to melt and flush away all ice, frost, and snow accumulation.

Step 2 (Anti-Icing): Immediately apply unheated SAE Type IV (or Type II) fluid to the clean upper wing and tail surfaces to establish a uniform protective gel blanket.

Holdover Time (HOT) Initiation: The Holdover Time clock begins at the exact moment the final application step (Step 2) commences , NOT when application is completed.