Study guide
13.3 Communication, Shift Turnover, Event Investigation & Professionalism
FAA Aviation Mechanic — General AMG
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & AMG Exam Overview
1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam
2 Chapter 2: Maintenance Forms, Records, Publications & Regulations
2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity
3 Chapter 3: Basic Electricity
3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge
4 Chapter 4: Materials & Processes
4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection
5 Chapter 5: Cleaning & Corrosion Control
5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards
6 Chapter 6: Weight & Balance
6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast
7 Chapter 7: Ground Operation, Servicing & Safety
7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention
8 Chapter 8: Aircraft Drawings
8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics
9 Chapter 9: Fluid Lines & Fittings
9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation
10 Chapter 10: Mathematics for Aviation Maintenance
10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions
11 Chapter 11: Physics for Aviation Maintenance
11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement
12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration
13 Chapter 13: Human Factors in Aviation Maintenance
13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism
13.3 Communication, Shift Turnover, Event Investigation & Professionalism
Key Takeaways Explain This Topic AI
A conforming shift turnover is written, verbal, and walked, and it must state which fasteners are installed but not torqued, what is open or disconnected, and what tools remain on the aircraft.
Selective reporting of hazards corrupts the data a safety system runs on, causing the organization to allocate defences against the wrong hazards.
FAA Form 8010-4 is the voluntary Malfunction or Defect Report feeding the Service Difficulty Reporting System, while 14 CFR 145.221 requires a certificated repair station to report a serious failure within 96 hours of discovery.
14 CFR 3.403 (which replaced 43.12, now reserved, in 2025) prohibits fraudulent or intentionally false statements in any document kept or used to show compliance, such as maintenance records; a violation is a basis for suspending or revoking the certificate or a civil penalty.
The Maintenance Error Decision Aid rests on three premises: technicians do not cause errors on purpose, errors result from a series of contributing factors, and most contributing factors are identifiable and manageable.
Last updated: October 2026
13.3 Communication, Shift Turnover, Event Investigation & Professionalism
This section closes ACS Subject AM.I.L with the elements that turn human-factors theory into daily practice: event investigation ( AM.I.L.K3 ), communication and reporting of hazards ( K6 ), teamwork and leadership ( K7 ), professionalism and integrity ( K8 ), and shift and task turnover ( K9 ), plus the risk of selective reporting of hazards ( R1 ) and the three skill elements — file a Malfunction or Defect Report ( S1 ), brief a shift turnover for continuity of work ( S2 ), and locate information regarding human factors errors ( S3 ).
1. Communication and Hazard Reporting (AM.I.L.K6)
Lack of communication is the first of the Dirty Dozen for a reason: most maintenance work crosses at least one boundary — between technicians, between shifts, between maintenance and flight crew, between the hangar and the stores room.
Rules that hold up:
Confirm receipt, not just transmission. A message is not communicated until the receiver plays it back in their own words.
Write it down. Verbal information degrades within minutes and disappears at shift change.
Be specific about state, not just action. "I removed the actuator" is incomplete; "actuator removed, hydraulic lines capped, electrical connector capped and stowed, three attach bolts in a bag taped to the bracket, torque not yet applied to anything" is a state.
Use standard phraseology on the radio and standard hand signals on the ramp. Improvisation kills.
Close the loop on discrepancies. A verbal "I'll take care of it" is not a deferral, a placard, or a record entry.
Reporting hazards and the risk of selective reporting (AM.I.L.R1)
Selective reporting — reporting the hazards that are convenient and omitting the ones that are embarrassing, expensive, or self-implicating — is the specific risk the ACS names. It is corrosive because it corrupts the data the safety system runs on: the organization sees a filtered picture and allocates its defences against the wrong hazards.
Reporting channels a mechanic should know:
Channel What it is Who uses it
Internal safety report / SMS hazard report The employer's own reporting system feeding safety risk management under 14 CFR Part 5 Anyone in the organization
FAA Form 8010-4, Malfunction or Defect Report Voluntary report of a failure, malfunction, or defect that feeds the FAA Service Difficulty Reporting System Part 91 mechanics, owners, repair facilities
Service Difficulty Report The mandatory version: a certificated repair station reports a serious failure, malfunction, or defect of an article to the FAA within 96 hours of discovery under 14 CFR § 145.221 ; Part 121 and Part 135 certificate holders have their own SDR obligations Certificate holders
Aviation Safety Reporting System (ASRS) NASA-administered confidential, voluntary reporting; timely filing may support a waiver of sanction under AC 00-46 Anyone, including mechanics
Aviation Safety Action Program (ASAP) A voluntary employer/FAA/labour program using an Event Review Committee to accept and act on self-reports Employees of participating organizations
Filing a Malfunction or Defect Report (AM.I.L.S1)
The skill element asks you to actually file one. FAA Form 8010-4 captures: aircraft registration and make/model/serial; the component or part make, model, part number and serial number; time since new, since overhaul, and since inspection; a specific description of the difficulty including how it was discovered; the stage of operation or inspection during which it was found; and the submitter's identity. The value of the report lies in the specificity: "cracked" is useless; "3/8-inch crack in the aft flange of the left main gear trunnion, found during eddy current inspection at 4,120 hours since new" is what generates an Airworthiness Directive.
2. Shift and Task Turnover (AM.I.L.K9, S2)
Turnover is where the most maintenance errors are seeded, because it combines a memory boundary, a communication boundary, and usually the circadian low.
A conforming turnover is written, verbal, and walked.
Written. A turnover log or task card annotation stating exactly what was done, what was not done, and what state the aircraft is in.
Verbal. A face-to-face briefing where the incoming technician asks questions and plays back their understanding.
Walked. Go to the aircraft together. Physically show the open panels, the disconnected lines, the installed but untorqued fasteners, and the tools in place.
Every turnover must positively answer these:
What work is complete , and is it signed for?
What work is in progress , and at exactly which step?
What is disconnected, removed, deactivated, or capped ?
What fasteners are installed but not torqued , and what is not safetied ?
What panels and access covers are open ?
What is installed but not tested ?
What tools, stands, jacks, or equipment are on or in the aircraft?
What parts are on order and what is the aircraft waiting on?
What hazards exist — energized systems, pressurized accumulators, jacked aircraft, fuel in an open tank?
The single most dangerous turnover item is the untorqued fastener, because a fastener that is installed looks complete. If a task cannot reach a natural stopping point, the standard defence is to back the fastener out and leave the joint visibly incomplete, or to place a highly visible warning tag on the control or the panel.
3. Teamwork and Leadership (AM.I.L.K7)
Maintenance Resource Management (MRM) is the maintenance analogue of flight-crew resource management. Its core content:
Brief the job before it starts. Who does what, who inspects what, what data is being used, what the finish criteria are.
Assertiveness is a technical skill. State the observation, state the concern, state the proposed action, and get an explicit decision . If the answer is unsatisfactory, escalate — the ACS lists lack of assertiveness as a Dirty Dozen precursor precisely because deference has killed people.
Leadership is situational. The person with the most relevant knowledge should be leading that portion of the task, regardless of rank.
Independent inspection means independent. The second signature exists to break the first person's expectation bias. Signing an item you did not personally verify is not a paperwork shortcut; it removes an entire layer of defence and, if the entry is knowingly false, it is a violation of 14 CFR § 3.403 (the rule that replaced § 43.12, now reserved, in 2025), which prohibits fraudulent or intentionally false statements in any document kept or used to show compliance, such as maintenance records; a violation is a basis for suspending or revoking the certificate or a civil penalty.
4. Professionalism and Integrity (AM.I.L.K8)
The mechanic's signature is the entire regulatory basis for an aircraft's return to service. There is no downstream inspector for most general-aviation work. Professionalism in this subject means specific, testable behaviours:
Sign only for what you actually did and actually verified.
Use current data. Check the revision level before you start, not after you finish.
Do not accept or apply pressure to compress an inspection or defer a step.
Report your own errors. A self-reported error is a safety input; a concealed error is a latent condition waiting for a flight.
Know the boundary of your certificate. Refuse work outside your rating, your recency under § 65.83, or your demonstrated ability under § 65.81.
Records integrity is regulatory. Under § 3.403, falsification is grounds for certificate action or a civil penalty.
5. Event Investigation (AM.I.L.K3)
When a maintenance error does occur, the organization's job is to find the contributing factors , not the culprit.
The industry standard tool is the Maintenance Error Decision Aid (MEDA) , developed by Boeing and widely adopted. Its premises are explicit and worth memorizing because they are the philosophy the ACS is testing:
Maintenance technicians do not cause errors on purpose.
Errors result from a series of contributing factors, most of which are under management control.
Most contributing factors are identifiable and manageable.
A MEDA-style investigation walks through: the event (what happened to the aircraft), the maintenance error (what specific action or omission led to it), the contributing factors (information, equipment and tools, aircraft design and configuration, the job or task itself, technical knowledge and skills, individual factors including fatigue, environment and facilities, organizational factors, leadership and supervision, communication), and finally corrective actions aimed at those factors.
Locating human-factors information (AM.I.L.S3). Know where to look: the FAA Aviation Maintenance Technician Handbook — General (FAA-H-8083-30B), the FAA Maintenance Human Factors website and its Operator's Manual for Human Factors in Aviation Maintenance , FAA advisory circulars on maintenance human factors and fatigue risk management, your employer's SMS documentation and internal reporting system, the ASRS database of de-identified maintenance reports, and manufacturer human-factors guidance such as the MEDA user's guide.