Study guide
11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
FAA Aviation Mechanic — General AMG
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & AMG Exam Overview
1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam
2 Chapter 2: Maintenance Forms, Records, Publications & Regulations
2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity
3 Chapter 3: Basic Electricity
3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge
4 Chapter 4: Materials & Processes
4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection
5 Chapter 5: Cleaning & Corrosion Control
5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards
6 Chapter 6: Weight & Balance
6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast
7 Chapter 7: Ground Operation, Servicing & Safety
7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention
8 Chapter 8: Aircraft Drawings
8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics
9 Chapter 9: Fluid Lines & Fittings
9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation
10 Chapter 10: Mathematics for Aviation Maintenance
10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions
11 Chapter 11: Physics for Aviation Maintenance
11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement
12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration
13 Chapter 13: Human Factors in Aviation Maintenance
13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism
11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
Key Takeaways Explain This Topic AI
Standard sea-level conditions are 29.92 inHg (1013.25 hPa) and 15 degrees Celsius (59 degrees Fahrenheit), with a lapse rate near 2 degrees Celsius per 1,000 feet up to a tropopause around 36,000 feet.
Pressure altitude equals field elevation plus (29.92 minus the altimeter setting) times 1,000; density altitude equals pressure altitude plus 120 times the Celsius deviation from ISA temperature.
Higher temperature, lower pressure, and higher humidity all reduce air density; humidity reduces it because water vapor molecules are lighter than the nitrogen and oxygen they displace.
An anti-servo tab moves in the same direction as the surface to increase stick force and prevent over-control, while a balance tab moves opposite the surface to reduce control force.
Vortex generators re-energize the boundary layer to delay separation, wing fences block spanwise flow on swept wings to prevent tip-first stall, and stall strips force the wing root to stall first to preserve aileron authority.
Last updated: October 2026
11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
Physics for Aviation ( AM.I.J ) ends with four knowledge elements that connect the shop to the air: theory of flight ( AM.I.J.K8 ), the standard atmosphere and the factors affecting atmospheric conditions ( K9 ), primary and secondary aircraft flight controls ( K10 ), and additional aerodynamic devices including vortex generators, wing fences, and stall strips ( K11 ). Two skill elements — determine density altitude ( S2 ) and determine pressure altitude ( S3 ) — are calculation items, and risk element R1 asks you to manage the performance consequences of density altitude. This section covers all of them.
1. The International Standard Atmosphere
The International Standard Atmosphere (ISA) is the agreed reference against which every performance chart, altimeter, and engine rating is defined. Memorize the sea-level values and the lapse rates.
- Parameter Standard sea-level value
- Pressure 29.92 inHg = 1013.25 hPa (millibars) = 14.7 psi
- Temperature 15 °C = 59 °F = 288.15 K = 518.67 °R
- Density 0.002377 slugs per cubic foot
- Temperature lapse rate about 2 °C (3.5 °F) per 1,000 ft up to the tropopause
- Pressure lapse rate about 1 inHg per 1,000 ft in the lower atmosphere
- Tropopause about 36,000 ft , above which temperature holds near -56.5 °C
Factors that shift the real atmosphere away from ISA are temperature, pressure, and humidity. Two of the three behave the way intuition expects; the third does not.
Higher temperature reduces air density. Molecules spread out.
Lower pressure reduces air density. Fewer molecules per unit volume.
Higher humidity reduces air density — the counter-intuitive one. A water molecule (molar mass 18) is lighter than the nitrogen (28) and oxygen (32) molecules it displaces, so moist air is less dense than dry air at the same temperature and pressure.
2. Pressure Altitude and Density Altitude (S2, S3)
Pressure altitude is simply the altitude the altimeter indicates when it is set to 29.92 inHg . On the ground you can compute it without touching the altimeter:
Pressure Altitude = Field Elevation + [(29.92 - Altimeter Setting) x 1,000]
Worked example. A hangar sits at a field elevation of 4,200 ft and the current altimeter setting is 29.42 inHg .
PA = 4,200 + [(29.92 - 29.42) x 1,000] = 4,200 + (0.50 x 1,000) = 4,200 + 500 = 4,700 ft
Because the pressure setting is below standard, the pressure altitude is higher than the field elevation.
Density altitude is pressure altitude corrected for non-standard temperature — the altitude at which the standard atmosphere has the density the aircraft is actually experiencing. The standard field approximation is:
Density Altitude = Pressure Altitude + [120 x (OAT - ISA temperature at that pressure altitude)] , temperatures in °C
where ISA temperature = 15 - (2 x pressure altitude in thousands of feet)
Worked example, continued. At a pressure altitude of 4,700 ft on a hot afternoon, the outside air temperature is 32 °C .
- ISA temperature at 4,700 ft = 15 - (2 x 4.7) = 15 - 9.4 = 5.6 °C
- Temperature deviation = 32 - 5.6 = +26.4 °C above standard
- DA = 4,700 + (120 x 26.4) = 4,700 + 3,168 = 7,868 ft
The airframe is sitting on a 4,200-ft field but performing as though it were at nearly 7,900 ft . That is why AM.I.J.R1 treats density altitude as a risk item:
Normally aspirated engines lose power roughly in proportion to the density drop, so takeoff thrust falls.
Propellers and rotors produce less thrust in thinner air.
True airspeed at a given indicated airspeed rises , so takeoff and landing ground rolls lengthen.
Turbine engines show reduced thrust and flat-rating limits reached at lower altitudes.
For a mechanic, the practical consequence is that engine run-up and power-assurance checks must be corrected to standard conditions before comparing readings to the maintenance manual's limits. An engine that appears weak on a hot high-density-altitude afternoon may be perfectly serviceable.
3. Theory of Flight in One Page (K8)
Lift is produced by turning the airflow. Two complementary explanations both appear in FAA material and both are correct as far as they go:
Bernoulli's view. The airflow over the cambered upper surface accelerates, so its static pressure falls relative to the lower surface, producing a net upward pressure force.
Newton's view. The wing deflects a mass of air downward; by the third law an equal and opposite upward force acts on the wing.
The lift equation ties it together: L = C_L x ½ρV² x S , where C_L is the lift coefficient (a function of airfoil shape and angle of attack), ρ is air density, V is true airspeed, and S is wing area. Two consequences a mechanic must retain:
Lift varies with the square of airspeed — double the speed, quadruple the lift at a given angle of attack.
Lift varies directly with density , so density altitude directly scales the lift available.
The four forces are lift, weight, thrust, and drag. Drag divides into parasite drag (form, skin friction, and interference), which increases with the square of airspeed, and induced drag , the by-product of lift that decreases with airspeed. Their sum produces the familiar total-drag curve with a minimum at the best lift-to-drag speed.
Stall occurs when the critical angle of attack is exceeded, and it is exceeded at that same angle regardless of airspeed, weight, bank angle, or altitude. This is worth repeating because it is a core aerodynamic fact.
4. Primary and Secondary Flight Controls (K10)
- Class Surfaces Axis and motion
- Primary Ailerons Longitudinal axis — roll
- Elevator (or stabilator on a one-piece moving surface) Lateral axis — pitch
- Rudder Vertical axis — yaw
- Secondary / auxiliary Trim tabs , balance tabs, anti-servo tabs, servo tabs Reduce or shape control force
Flaps — plain, split, slotted, Fowler Increase lift coefficient and drag for low-speed flight; the Fowler flap adds wing area as well as camber and gives the greatest lift increase
- Leading-edge slats and slots Delay separation at high angle of attack
- Spoilers and speed brakes Dump lift and add drag; on many transports spoilers also augment roll
Tab logic is a classic exam distinction. A trim tab is set by the pilot and moves independently to hold a control in position with zero stick force. A balance tab is linked to move opposite to the control surface, reducing the force needed to move it. A servo tab is moved directly by the cockpit control and aerodynamically drives the main surface. An anti-servo tab moves in the same direction as the surface, deliberately increasing stick force to prevent over-control — it is the standard fit on a stabilator.
5. Additional Aerodynamic Devices (K11)
These three small devices carry disproportionate exam weight because they look trivial and are easy to confuse. All three are flight-critical : they may not be omitted, relocated, or reshaped during a repair or repaint.
Vortex generators. Small vanes standing perpendicular to the surface, set at a slight angle to the local flow, usually in a spanwise row on the upper wing surface or ahead of a control surface. Each one sheds a small vortex that drags high-energy air from the free stream down into the boundary layer , re-energizing it so it stays attached to a higher angle of attack. Result: delayed separation, lower stall speed, and improved control effectiveness at low speed. Missing or damaged vortex generators degrade stall behaviour measurably, and an STC that installs them makes them part of the approved configuration.
Wing fences (boundary layer fences). A thin chordwise plate standing proud of the upper surface, most often on swept wings. Swept wings develop spanwise flow toward the tip, which thickens the boundary layer outboard and makes the tip stall first — a dangerous condition because the ailerons are out there and a tip stall pitches the aircraft up. The fence blocks that spanwise drift and keeps the stall progression moving from root to tip.
Stall strips. A small, sharp triangular strip bonded to the inboard leading edge . It deliberately spoils the local airflow so that at high angle of attack the wing root stalls first . Root-first stall preserves aileron authority into the stall, keeps the stall symmetric, and lets the disturbed root wake buffet the tail as a natural stall warning. Stall strip position and symmetry are critical: an aircraft with one strip missing or misplaced can drop a wing sharply at the stall.