Study guide
11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle
FAA Aviation Mechanic — General AMG
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & AMG Exam Overview
1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam
2 Chapter 2: Maintenance Forms, Records, Publications & Regulations
2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity
3 Chapter 3: Basic Electricity
3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge
4 Chapter 4: Materials & Processes
4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection
5 Chapter 5: Cleaning & Corrosion Control
5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards
6 Chapter 6: Weight & Balance
6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast
7 Chapter 7: Ground Operation, Servicing & Safety
7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention
8 Chapter 8: Aircraft Drawings
8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics
9 Chapter 9: Fluid Lines & Fittings
9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation
10 Chapter 10: Mathematics for Aviation Maintenance
10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions
11 Chapter 11: Physics for Aviation Maintenance
11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement
12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration
13 Chapter 13: Human Factors in Aviation Maintenance
13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism
11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle
Key Takeaways Explain This Topic AI
Fluid pressure is defined as normal force per unit surface area ( P = F / A P = F / A P = F / A , measured in psi \text{psi} psi or Pascals); hydrostatic head pressure in a liquid column is governed strictly by fluid weight density and vertical column depth ( P = D w h = ρ g h P = D_w h = \rho g h P = D w h = ρ g h ).
Pascal's Law establishes that pressure applied to an enclosed, confined liquid is transmitted equally and undiminished in all directions, acting with equal force on equal areas at right angles to container walls ( F 1 / A 1 = F 2 / A 2 F_1/A_1 = F_2/A_2 F 1 / A 1 = F 2 / A 2 ).
Hydraulic force multiplication is inversely coupled to piston travel by volume conservation ( A 1 × d 1 = A 2 × d 2 A_1 \times d_1 = A_2 \times d_2 A 1 × d 1 = A 2 × d 2 ), proving that mechanical advantage cannot create free energy ( W in = W out W_{\text{in}} = W_{\text{out}} W in = W out ).
Archimedes' Principle states that a submerged or floating body experiences an upward buoyant force equal to the weight of the fluid it displaces ( F B = D w V disp F_B = D_w V_{\text{disp}} F B = D w V disp ).
Bernoulli's Principle expresses conservation of energy in streamline fluid flow: Total Pressure equals static pressure plus dynamic pressure ( P t = P s + 1 2 ρ v 2 P_t = P_s + \frac{1}{2}\rho v^2 P t = P s + 2 1 ρ v 2 ); as fluid accelerates through a constriction, static pressure decreases proportionally.
Last updated: August 2026
11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle
Fluid power systems—both hydraulics (liquids) and pneumatics (gases)—drive critical aircraft mechanisms, including flight controls, wheel brakes, thrust reversers, and landing gear extension. Simultaneously, the dynamic flow of air over lifting surfaces generates flight forces. An Aviation Maintenance Technician must understand fluid statics, Pascal's Law, Archimedes' buoyancy, Bernoulli's energy conservation principle, and fluid viscosity in accordance with FAA-H-8083-30B .
- 1. Fluid Pressure & Hydrostatic Principles
- Definition of Fluid Pressure
Pressure ( P P P ) is defined as the magnitude of normal force ( F F F ) exerted per unit of surface area ( A A A ): P = Force ( F ) Area ( A ) F = P × A A = F P P = \frac{\text{Force } (F)}{\text{Area } (A)} \qquad F = P \times A \qquad A = \frac{F}{P} P = Area ( A ) Force ( F ) F = P × A A = P F
Aviation Units of Pressure:
Pounds per Square Inch (psi): Standard American aviation unit for hydraulic systems ( 3 , 000 psi 3,000\text{ psi} 3 , 000 psi ), aircraft tires ( 40 − 200 psi 40 - 200\text{ psi} 40 − 200 psi ), and engine oil pressure ( 40 − 90 psi 40 - 90\text{ psi} 40 − 90 psi ).
Inches of Mercury (inHg): Barometric and engine manifold pressure standard ( 29.92 inHg = 14.696 psi 29.92\text{ inHg} = 14.696\text{ psi} 29.92 inHg = 14.696 psi ).
Pascal (Pa) / Kilopascal (kPa): SI Metric unit ( 1 Pa = 1 N/m 2 1\text{ Pa} = 1\text{ N/m}^2 1 Pa = 1 N/m 2 ; 101.325 kPa = 1 atm = 14.696 psi = 29.92 inHg 101.325\text{ kPa} = 1\text{ atm} = 14.696\text{ psi} = 29.92\text{ inHg} 101.325 kPa = 1 atm = 14.696 psi = 29.92 inHg ).
Bar: Meteorological and European unit ( 1 bar = 100 , 000 Pa = 14.504 psi 1\text{ bar} = 100,000\text{ Pa} = 14.504\text{ psi} 1 bar = 100 , 000 Pa = 14.504 psi ).
Hydrostatic Head Pressure
The static pressure exerted at the base of an unconfined column of stationary liquid is called hydrostatic head pressure . It depends solely upon the weight density of the liquid ( D w D_w D w ) and the vertical depth of the column ( h h h ) , completely independent of the shape, volume, or lateral width of the container: P = D w × h = ρ × g × h P = D_w \times h = \rho \times g \times h P = D w × h = ρ × g × h Pressure in psi = D w ( lb/ft 3 ) × h ( ft ) 144 ( in 2 / ft 2 ) \text{Pressure in psi} = \frac{D_w (\text{lb/ft}^3) \times h (\text{ft})}{144 \; (\text{in}^2/\text{ft}^2)} Pressure in psi = 144 ( in 2 / ft 2 ) D w ( lb/ft 3 ) × h ( ft )
Fluid Type Weight Density ( D w D_w D w ) Hydrostatic Pressure Gradient
Pure Water 62.4 lb/ft 3 62.4\text{ lb/ft}^3 62.4 lb/ft 3 0.433 psi per foot of depth 0.433\text{ psi per foot of depth} 0.433 psi per foot of depth ( 62.4 / 144 62.4 / 144 62.4/144 )
MIL-PRF-5606 Hydraulic Fluid 52.96 lb/ft 3 52.96\text{ lb/ft}^3 52.96 lb/ft 3 0.368 psi per foot of depth 0.368\text{ psi per foot of depth} 0.368 psi per foot of depth ( 52.96 / 144 52.96 / 144 52.96/144 )
100LL Aviation Gasoline 44.88 lb/ft 3 44.88\text{ lb/ft}^3 44.88 lb/ft 3 0.312 psi per foot of depth 0.312\text{ psi per foot of depth} 0.312 psi per foot of depth ( 44.88 / 144 44.88 / 144 44.88/144 )
Jet-A Turbine Fuel 50.12 lb/ft 3 50.12\text{ lb/ft}^3 50.12 lb/ft 3 0.348 psi per foot of depth 0.348\text{ psi per foot of depth} 0.348 psi per foot of depth ( 50.12 / 144 50.12 / 144 50.12/144 )
Loading diagram... Pascal's Hydraulic Multiplier System
2. Pascal's Law and Hydraulic Force Multiplication
Discovered by Blaise Pascal in 1653, Pascal's Law forms the foundation of all aircraft hydraulic systems:
Pressure applied to an enclosed, confined fluid is transmitted equally and undiminished in all directions, and acts with equal force on equal areas and at right angles to the container walls.
Mathematical Formulation of Hydraulic Multiplication
In a closed hydraulic circuit comprising an input (master) piston and an output (slave) actuator: P 1 = P 2 ⟹ F 1 A 1 = F 2 A 2 ⟹ F 2 = F 1 × ( A 2 A 1 ) P_1 = P_2 \implies \frac{F_1}{A_1} = \frac{F_2}{A_2} \implies F_2 = F_1 \times \left(\frac{A_2}{A_1}\right) P 1 = P 2 ⟹ A 1 F 1 = A 2 F 2 ⟹ F 2 = F 1 × ( A 1 A 2 ) Piston Cross-Sectional Area ( A ) = π 4 d 2 = π r 2 = 0.7854 × d 2 \text{Piston Cross-Sectional Area } (A) = \frac{\pi}{4} d^2 = \pi r^2 = 0.7854 \times d^2 Piston Cross-Sectional Area ( A ) = 4 π d 2 = π r 2 = 0.7854 × d 2
Volume Conservation & Displacement Relationship
Because hydraulic fluids are practically incompressible, the volume of fluid displaced by the input piston ( V 1 V_1 V 1 ) must exactly equal the volume received by the output actuator ( V 2 V_2 V 2 ): V 1 = V 2 ⟹ A 1 × d 1 = A 2 × d 2 ⟹ d 2 = d 1 × ( A 1 A 2 ) V_1 = V_2 \implies A_1 \times d_1 = A_2 \times d_2 \implies d_2 = d_1 \times \left(\frac{A_1}{A_2}\right) V 1 = V 2 ⟹ A 1 × d 1 = A 2 × d 2 ⟹ d 2 = d 1 × ( A 2 A 1 ) Energy Conservation in Hydraulic Systems:
- Work Input = Force_1 × Displacement_1 = (F1) × (d1)
- Work Output = Force_2 × Displacement_2 = (F1 × A2/A1) × (d1 × A1/A2) = F1 × d1
- Work Output = Work Input (Ignoring Minor Friction Losses)
Hydraulic Trade-off Principle: Hydraulic systems amplify force at the direct expense of distance. If a slave piston has 5 times the surface area of the master piston, the output force is multiplied by 5 , but the slave piston moves only one-fifth ( 1 / 5 1/5 1/5 ) of the distance traveled by the master piston.
3. Archimedes' Principle & Buoyancy
Formulated in ancient Syracuse, Archimedes' Principle governs fluid buoyancy across seaplanes, floatplanes, fuel level floats, and aerostats:
An object wholly or partially immersed in a fluid is buoyed up by a force equal to the weight of the fluid displaced by the object. F B = Weight of Displaced Fluid = D w × V displaced = ρ × g × V displaced F_B = \text{Weight of Displaced Fluid} = D_w \times V_{\text{displaced}} = \rho \times g \times V_{\text{displaced}} F B = Weight of Displaced Fluid = D w × V displaced = ρ × g × V displaced
Equilibrium States:
Positive Buoyancy ( F B > W object F_B > W_{\text{object}} F B > W object ): The object floats upward to the surface until displaced fluid weight equals object weight (e.g., fuel tank transmitter float, blimp filled with lighter-than-air helium).
Neutral Buoyancy ( F B = W object F_B = W_{\text{object}} F B = W object ): The object remains suspended at its current depth (e.g., submarine, aerostat at ceiling altitude).
Negative Buoyancy ( F B < W object F_B < W_{\text{object}} F B < W object ): The object sinks to the bottom.
FAA Seaplane Float Requirement (14 CFR Part 23): Floats on twin-float seaplanes must provide at least 80% buoyancy reserve (each individual float must displace at least 90% of aircraft maximum takeoff weight, ensuring combined 180% buoyancy of gross weight).
4. Bernoulli's Principle & Dynamic Fluid Flow
Formulated by Daniel Bernoulli in 1738, this principle applies the Law of Conservation of Energy to an ideal (incompressible, non-viscous) fluid in continuous streamline flow: Total Fluid Pressure ( P t ) = Static Pressure ( P s ) + Dynamic Pressure ( q ) = Constant \text{Total Fluid Pressure } (P_t) = \text{Static Pressure } (P_s) + \text{Dynamic Pressure } (q) = \text{Constant} Total Fluid Pressure ( P t ) = Static Pressure ( P s ) + Dynamic Pressure ( q ) = Constant P s + 1 2 ρ v 2 = P t P_s + \frac{1}{2} \rho v^2 = P_t P s + 2 1 ρ v 2 = P t
Static Pressure ( P s P_s P s ): The actual thermodynamic pressure of the fluid, acting equally in all directions (measured perpendicular to flow).
Dynamic Pressure ( q = 1 2 ρ v 2 q = \frac{1}{2}\rho v^2 q = 2 1 ρ v 2 ): The pressure resulting from the kinetic energy of fluid velocity.
The Bernoulli Governing Rule: As the velocity of a moving fluid increases, its internal static pressure decreases proportionally; conversely, as fluid velocity decreases, its static pressure increases.
Loading diagram... Venturi Tube Static and Dynamic Pressure Profile
- 5. Aviation Applications of Bernoulli's Principle
- 1. The Aircraft Carburetor Venturi
In a float-type aircraft carburetor, intake air enters a converging duct that constricts into a narrow venturi throat :
As air accelerates through the throat, velocity ( v v v ) reaches a maximum, causing static pressure ( P s P_s P s ) to drop significantly below ambient atmospheric pressure.
Atmospheric pressure in the vented float chamber pushes fuel up through the main discharge nozzle into the low-pressure throat airstream, where it atomizes into a combustible fuel-air vapor.
2. Airfoil Lift Generation
When air flows past an asymmetric (cambered) airfoil:
The convex upper camber forces airflow streamlines to converge and accelerate over the upper wing surface.
By Bernoulli's Principle, this elevated velocity causes a localized drop in static pressure across the upper surface.
The relatively higher static pressure beneath the flatter lower surface produces a net upward aerodynamic force: Lift .
3. Pitot-Static Probe & Airspeed Indicators
An aircraft Airspeed Indicator (ASI) operates by comparing two pressures:
Pitot Tube (Ram Air): Senses Total Pressure ( P t = P s + q P_t = P_s + q P t = P s + q ) at the stagnation point.
Static Port: Senses undisturbed ambient Static Pressure ( P s P_s P s ).
The internal differential diaphragm mechanically subtracts static pressure from total pressure, measuring Dynamic Pressure ( q = P t − P s = 1 2 ρ v 2 q = P_t - P_s = \frac{1}{2}\rho v^2 q = P t − P s = 2 1 ρ v 2 ) , which is calibrated directly in knots of indicated airspeed.
- 6. Fluid Viscosity, Friction & Reynolds Number
- Fluid Viscosity & Viscosity Index
Viscosity is the internal fluid friction or resistance of a fluid to shear, deformation, and flow:
Saybolt Universal Seconds (SUS): Measured using a Saybolt Viscosimeter, defined as the time in seconds required for 60 mL 60\text{ mL} 60 mL of fluid to flow through a precision calibrated orifice at 100 ∘ F 100^\circ\text{F} 10 0 ∘ F or 210 ∘ F 210^\circ\text{F} 21 0 ∘ F .
Kinematic Viscosity (Centistokes, cSt): Direct metric measure of fluid shear resistance ( 1 cSt = 1 mm 2 / s 1\text{ cSt} = 1\text{ mm}^2/\text{s} 1 cSt = 1 mm 2 / s ).
Viscosity Index (VI): An empirical measure of how a fluid's viscosity changes with temperature variations. High-VI aviation hydraulic fluids (such as MIL-PRF-5606 and Skydrol) maintain stable viscosity across extreme operating envelopes ( − 65 ∘ F -65^\circ\text{F} − 6 5 ∘ F to + 275 ∘ F +275^\circ\text{F} + 27 5 ∘ F ).
Laminar vs. Turbulent Flow & Reynolds Number ( R e Re R e )
Laminar Flow: Fluid particles travel in smooth, parallel streamlines with no lateral mixing or turbulent vortices. Friction is governed strictly by molecular viscosity.
Turbulent Flow: Fluid particles move in chaotic, swirling eddies and cross-currents, generating high energy dissipation and aerodynamic drag.
Reynolds Number ( R e Re R e ): Dimensionless ratio of inertial forces to viscous forces: R e = ρ × v × L μ Re = \frac{\rho \times v \times L}{\mu} R e = μ ρ × v × L
Low R e Re R e ( < 2 , 000 < 2,000 < 2 , 000 in pipes; < 5 × 10 5 < 5 \times 10^5 < 5 × 1 0 5 on airfoils) indicates laminar flow .
High R e Re R e ( > 4 , 000 > 4,000 > 4 , 000 in pipes; > 10 6 > 10^6 > 1 0 6 on airfoils) indicates turbulent flow .
- 7. Worked Calculation Examples
- Example 1: Aircraft Hydraulic Brake Multiplier
Problem: A pilot applies 40.0 lbs 40.0\text{ lbs} 40.0 lbs of force to a toe brake pedal master cylinder with an effective piston diameter of 0.50 inch 0.50\text{ inch} 0.50 inch . The hydraulic brake line connects to a wheel caliper slave cylinder with a piston diameter of 1.50 inches 1.50\text{ inches} 1.50 inches .
Determine system hydraulic pressure ( P P P ), output clamping force ( F 2 F_2 F 2 ), and slave piston displacement ( d 2 d_2 d 2 ) when the master cylinder is depressed 1.20 inches 1.20\text{ inches} 1.20 inches .
Solution:
Calculate piston surface areas: A 1 = π 4 d 1 2 = 0.7854 × ( 0.50 ) 2 = 0.19635 sq in A_1 = \frac{\pi}{4} d_1^2 = 0.7854 \times (0.50)^2 = 0.19635\text{ sq in} A 1 = 4 π d 1 2 = 0.7854 × ( 0.50 ) 2 = 0.19635 sq in A 2 = π 4 d 2 2 = 0.7854 × ( 1.50 ) 2 = 1.76715 sq in A_2 = \frac{\pi}{4} d_2^2 = 0.7854 \times (1.50)^2 = 1.76715\text{ sq in} A 2 = 4 π d 2 2 = 0.7854 × ( 1.50 ) 2 = 1.76715 sq in
Calculate system hydraulic pressure: P = F 1 A 1 = 40.0 lbs 0.19635 sq in = 203.72 psi P = \frac{F_1}{A_1} = \frac{40.0\text{ lbs}}{0.19635\text{ sq in}} = 203.72\text{ psi} P = A 1 F 1 = 0.19635 sq in 40.0 lbs = 203.72 psi
Calculate output clamping force at brake caliper ( F 2 F_2 F 2 ): F 2 = P × A 2 = 203.72 psi × 1.76715 sq in = 360.0 lbs F_2 = P \times A_2 = 203.72\text{ psi} \times 1.76715\text{ sq in} = 360.0\text{ lbs} F 2 = P × A 2 = 203.72 psi × 1.76715 sq in = 360.0 lbs Verify via Area Ratio: F 2 = F 1 × ( d 2 d 1 ) 2 = 40.0 × ( 1.50 0.50 ) 2 = 40.0 × 9.0 = 360.0 lbs \text{Verify via Area Ratio: } F_2 = F_1 \times \left(\frac{d_2}{d_1}\right)^2 = 40.0 \times \left(\frac{1.50}{0.50}\right)^2 = 40.0 \times 9.0 = 360.0\text{ lbs} Verify via Area Ratio: F 2 = F 1 × ( d 1 d 2 ) 2 = 40.0 × ( 0.50 1.50 ) 2 = 40.0 × 9.0 = 360.0 lbs
Calculate slave piston displacement ( d 2 d_2 d 2 ): d 2 = d 1 × ( A 1 A 2 ) = 1.20 in × ( 1 9.0 ) = 0.1333 inches d_2 = d_1 \times \left(\frac{A_1}{A_2}\right) = 1.20\text{ in} \times \left(\frac{1}{9.0}\right) = 0.1333\text{ inches} d 2 = d 1 × ( A 2 A 1 ) = 1.20 in × ( 9.0 1 ) = 0.1333 inches
Example 2: Fuel Tank Sump Hydrostatic Head Pressure
Problem: A transport aircraft wing fuel tank contains a vertical depth of 5.0 feet 5.0\text{ feet} 5.0 feet of Jet-A fuel ( D w = 6.7 lb/gal D_w = 6.7\text{ lb/gal} D w = 6.7 lb/gal , where 1 ft 3 = 7.48 gal 1\text{ ft}^3 = 7.48\text{ gal} 1 ft 3 = 7.48 gal ).
Compute the hydrostatic gauge pressure exerted on the tank drain valve at the bottom of the wing sump.
Solution:
Determine fuel weight density in lb/ft 3 \text{lb/ft}^3 lb/ft 3 : D w = 6.7 lb/gal × 7.4805 gal/ft 3 = 50.12 lb/ft 3 D_w = 6.7\text{ lb/gal} \times 7.4805\text{ gal/ft}^3 = 50.12\text{ lb/ft}^3 D w = 6.7 lb/gal × 7.4805 gal/ft 3 = 50.12 lb/ft 3
Calculate hydrostatic head pressure: P = D w × h 144 = 50.12 lb/ft 3 × 5.0 ft 144 sq in/sq ft = 250.60 lb/ft 2 144 = 1.740 psi P = \frac{D_w \times h}{144} = \frac{50.12\text{ lb/ft}^3 \times 5.0\text{ ft}}{144\text{ sq in/sq ft}} = \frac{250.60\text{ lb/ft}^2}{144} = 1.740\text{ psi} P = 144 D w × h = 144 sq in/sq ft 50.12 lb/ft 3 × 5.0 ft = 144 250.60 lb/ft 2 = 1.740 psi
Example 3: Dynamic Pressure and Airspeed Relationship
Problem: At sea level standard density ( ρ = 0.002377 slugs/ft 3 \rho = 0.002377\text{ slugs/ft}^3 ρ = 0.002377 slugs/ft 3 ), an aircraft flies at a true airspeed of 150 knots 150\text{ knots} 150 knots ( 253.2 ft/s 253.2\text{ ft/s} 253.2 ft/s ).
Calculate the dynamic pressure ( q q q ) sensed by the pitot tube diaphragm.
Solution:
Calculate dynamic pressure: q = 1 2 ρ v 2 = 0.5 × 0.002377 slugs/ft 3 × ( 253.2 ft/s ) 2 q = \frac{1}{2} \rho v^2 = 0.5 \times 0.002377\text{ slugs/ft}^3 \times (253.2\text{ ft/s})^2 q = 2 1 ρ v 2 = 0.5 × 0.002377 slugs/ft 3 × ( 253.2 ft/s ) 2 q = 0.0011885 × 64 , 110.24 = 76.20 lb/ft 2 q = 0.0011885 \times 64,110.24 = 76.20\text{ lb/ft}^2 q = 0.0011885 × 64 , 110.24 = 76.20 lb/ft 2
Convert to psi \text{psi} psi : q = 76.20 144 = 0.529 psi q = \frac{76.20}{144} = 0.529\text{ psi} q = 144 76.20 = 0.529 psi