Study guide

2.5 Airworthiness Directives (ADs) & Mandatory Compliance

FAA Aviation Mechanic — General AMG

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & AMG Exam Overview

1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam

2 Chapter 2: Maintenance Forms, Records, Publications & Regulations

2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity

3 Chapter 3: Basic Electricity

3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge

4 Chapter 4: Materials & Processes

4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection

5 Chapter 5: Cleaning & Corrosion Control

5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards

6 Chapter 6: Weight & Balance

6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast

7 Chapter 7: Ground Operation, Servicing & Safety

7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention

8 Chapter 8: Aircraft Drawings

8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics

9 Chapter 9: Fluid Lines & Fittings

9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation

10 Chapter 10: Mathematics for Aviation Maintenance

10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions

11 Chapter 11: Physics for Aviation Maintenance

11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices

12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement

12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration

13 Chapter 13: Human Factors in Aviation Maintenance

13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism

2.5 Airworthiness Directives (ADs) & Mandatory Compliance

Key Takeaways Explain This Topic AI

Title 14 CFR Part 39 establishes Airworthiness Directives (ADs) as legally enforceable federal regulations issued by the FAA to correct unsafe conditions in civil aeronautical products.

Operating an aircraft that does not comply with all applicable ADs is a direct violation of 14 CFR § 39.7 and renders the aircraft unairworthy.

ADs are categorized by urgency: standard Notice of Proposed Rulemaking (NPRM) ADs, Emergency ADs (requiring immediate grounding or action), one-time terminating action ADs, and recurring repetitive inspection ADs.

An Alternative Method of Compliance (AMOC) may be used only after the manager of the FAA office identified in the AD approves it (14 CFR 39.19); anyone may propose one, normally through their principal inspector.

The AD status record under 14 CFR § 91.417(a)(2)(v) must show, for each applicable AD, the method of compliance, the AD number and revision date, and, for a recurring AD, the time and date when the next action is required.

Last updated: October 2026

2.5 Airworthiness Directives (ADs) & Mandatory Compliance

Under Title 14 CFR Part 39, the Federal Aviation Administration issues Airworthiness Directives (ADs) when an unsafe condition is found to exist in a product (aircraft, aircraft engine, propeller, or appliance), and that condition is likely to exist or develop in other products of the same type design. ADs carry the full force of federal law; failure to comply with an AD renders an aircraft legally unairworthy and invalidates its standard airworthiness certificate.

  • 1. Legal Authority and Rulemaking Process (14 CFR Part 39)
  • The Mandatory Nature of ADs (§ 39.7)

Section 39.7 establishes that no person may operate a product to which an Airworthiness Directive applies, except in accordance with the requirements of that Airworthiness Directive .

Unlike manufacturer Service Bulletins (which are advisory unless mandated by an AD), ADs are federal rules published in full in the Federal Register as amendments to 14 CFR 39.13; they are part of the CFR but are not codified in the annual edition (§ 39.13). AIRWORTHINESS DIRECTIVE (AD) LIFECYCLE

  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ 1. UNSAFE CONDITION IDENTIFIED │
  • │ - Service Difficulty Reports (SDRs), accidents, manufacturer data │
  • ├────────────────────────────────────────────────────────────────────────┤
  • │ 2. RULEMAKING PATHWAY │
  • │ • Standard: Notice of Proposed Rulemaking (NPRM) -> Public Comment │
  • │ • Urgent: Final Rule / Request for Comments │
  • │ • Emergency AD: Sent directly to registered owners (Immediate) │
  • ├────────────────────────────────────────────────────────────────────────┤
  • │ 3. PUBLICATION IN FEDERAL REGISTER │
  • │ - Specifies Effective Date, Applicability, and Compliance Window │
  • ├────────────────────────────────────────────────────────────────────────┤
  • │ 4. MAINTENANCE COMPLIANCE & LOGGING (§ 91.417) │
  • │ - One-time terminating action OR recurring repetitive inspection │
  • │ - Permanent AD tracking log entry executed │
  • └────────────────────────────────────────────────────────────────────────┘
  • The AD Numbering System

The FAA identifies Airworthiness Directives using a standard three-element alphanumeric system (e.g., AD 2026-14-05 ):

First Element (2026): The calendar year the AD was issued.

Second Element (14): The biweekly publishing period (1 to 26) during which the AD was released.

Third Element (05): The sequential number of the AD issued during that specific biweekly period.

If an AD is revised, an "R" suffix is appended (e.g., AD 2026-14-05 R1 ).

Loading diagram... Airworthiness Directive Recurrence & Compliance Flow

2. Categories of Airworthiness Directives

AD Category Trigger / Purpose Effective Date / Compliance Window

Standard (NPRM) AD Routine unsafe condition identified; published for public review. Effective on the date stated in the final rule; compliance specified in hours/cycles/calendar.

Emergency AD Critical safety hazard requiring immediate action to prevent catastrophic failure. Effective immediately upon receipt (sent via email/fax/telegram to registered owners).

One-Time AD Requires a single inspection, modification, or part replacement that permanently fixes the defect. Once complied with, no further action is required; logged permanently as terminating action.

Recurring (Repetitive) AD Requires ongoing inspections or servicing at specified intervals (e.g., every 100 hours or 12 calendar months). Must be repeated indefinitely until a terminating modification is developed and installed.

Conditional AD Action triggered only if a specific event occurs (e.g., engine prop strike, hard landing, overspeed). Must be complied with prior to further flight following the triggering event.

3. Alternative Methods of Compliance (AMOC)

Under 14 CFR § 39.19, an operator or technician may request approval for an Alternative Method of Compliance (AMOC) :

An AMOC allows an aircraft to comply with the intent of an AD using a different technique, modification, tooling, or inspection interval than specifically written in the AD.

Approval Authority: You may use an AMOC only if the manager of the FAA office identified in the AD approves it (§ 39.19). Each AD names that office (§ 39.21); proposals normally go through your principal inspector, or directly to the manager if you have none.

Local FSDO Aviation Safety Inspectors (ASIs) and A&P/IA mechanics do NOT have legal authority to approve an AMOC.

4. AD Recordkeeping Requirements (§ 91.417(a)(2)(v))

Under 14 CFR § 91.417(a)(2)(v), the owner/operator must keep a record of the current status of applicable ADs , retained and transferred with the aircraft when it is sold. For each applicable AD the record must show:

AD Number and Revision Date (e.g., AD 2024-08-02 R1)

Method of Compliance (e.g., "Complied with by eddy current inspection per Piper Service Bulletin 1342A, paragraph 3")

Time and Date of the Next Required Action if the AD involves recurring action (e.g., "Next due at 1,942.6 hours or August 2027").

Good practice also records the AD's subject, the date of compliance, and the aircraft total time in service (e.g., 1,842.6 hours) at compliance, so the next-due calculation can be checked.

Comparative Matrix: Regulatory Standing of Aviation Publications

Publication Type Issuing Authority Legal Standing Mandatory Compliance?

Airworthiness Directive (AD) Federal Aviation Administration Federal Regulation (14 CFR Part 39) MANDATORY for each product it identifies

Service Bulletin (SB) Aircraft / Component Manufacturer Manufacturer Technical Guidance Non-mandatory for Part 91 unless referenced by an AD

Service Letter / Instruction Aircraft / Component Manufacturer Informational / Best Practice Non-mandatory (Advisory)

Advisory Circular (AC) Federal Aviation Administration Acceptable Methods / Guidance Non-mandatory (Acceptable Data)