Study guide
2.4 FAA Form 337 Major Repairs and Major Alterations
FAA Aviation Mechanic — General AMG
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & AMG Exam Overview
1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam
2 Chapter 2: Maintenance Forms, Records, Publications & Regulations
2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity
3 Chapter 3: Basic Electricity
3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge
4 Chapter 4: Materials & Processes
4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection
5 Chapter 5: Cleaning & Corrosion Control
5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards
6 Chapter 6: Weight & Balance
6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast
7 Chapter 7: Ground Operation, Servicing & Safety
7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention
8 Chapter 8: Aircraft Drawings
8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics
9 Chapter 9: Fluid Lines & Fittings
9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation
10 Chapter 10: Mathematics for Aviation Maintenance
10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions
11 Chapter 11: Physics for Aviation Maintenance
11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement
12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration
13 Chapter 13: Human Factors in Aviation Maintenance
13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism
2.4 FAA Form 337 Major Repairs and Major Alterations
Key Takeaways Explain This Topic AI
14 CFR Part 43 Appendix A provides the definitive legal taxonomy to distinguish major repairs and alterations from minor repairs and alterations.
Major repairs and major alterations must be recorded on FAA Form 337 (Major Repair and Alteration) in accordance with 14 CFR Part 43 Appendix B.
Form 337 is executed at least in duplicate: a signed copy goes to the aircraft owner, and a copy is forwarded to the FAA Aircraft Registration Branch in Oklahoma City within 48 hours after return to service (Appendix B(a)).
Major alterations and repairs require FAA-approved data (such as ADs, STCs, TCDS, DER-approved Form 8110-3, or FAA Field Approvals), whereas minor repairs require only acceptable data (such as AC 43.13-1B).
Extended-range fuel tanks installed in passenger or baggage compartments require Form 337 in at least triplicate: one copy on board the aircraft, one to the owner, and one to the FAA Aircraft Registration Branch within 48 hours after the work is inspected (Appendix B(d)).
Last updated: October 2026
2.4 FAA Form 337 Major Repairs and Major Alterations
When maintenance activities exceed the threshold of routine maintenance, aviation technicians enter the realm of major repairs and major alterations . These critical operations require strict adherence to approved technical data, formal documentation on FAA Form 337 , and specialized return-to-service authorizations.
1. Classification under 14 CFR Part 43 Appendix A
Appendix A of Part 43 provides the regulatory benchmark for classifying maintenance tasks:
Major Alteration (Airframe, Powerplant, Propeller, Appliance)
A major alteration is an alteration not listed in the product's type certificate data sheet (TCDS) that:
Might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other qualities affecting airworthiness; OR
Is not done according to accepted practices or cannot be done by elementary operations.
Examples of Major Alterations:
Installing an unapproved avionics package or autopilot system.
Converting an engine to use an alternate fuel or turbocharger system.
Installing floats, skis, or extended-range fuel tanks.
Changes to the basic wing or control surface design.
Major Repair (Airframe, Powerplant, Propeller, Appliance)
A major repair is a repair that:
If improperly done, might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other airworthiness qualities; OR
Is not done according to accepted practices or cannot be done by elementary operations.
Examples of Major Repairs:
Splicing of skin sheets, stringers, spar flanges, or wing ribs.
Straightening or welding of structural steel tubing fuselage members.
Overhaul of a pressure-type carburetor or a pressure-type fuel, oil, or hydraulic pump.
Straightening or shortening of propeller blades.
Rewinding the field coil of an electrical accessory.
Comparative Matrix: Major vs. Minor vs. Preventive Maintenance
Classification Technical Threshold Data Required Return to Service Authorization Form Required
Preventive Maintenance Simple/elementary operations listed in Part 43 App A(c) Acceptable Data (AC 43.13 / Manual) Private Pilot (owned a/c), A&P, IA, Repair Station Logbook entry (§ 43.9)
Minor Repair Does not appreciably affect flight/structural qualities Acceptable Data (AC 43.13 / Manual) A&P Mechanic, IA, Repair Station Logbook entry (§ 43.9)
Minor Alteration Listed in TCDS or standard specification Acceptable Data (AC 43.13 / Manual) A&P Mechanic, IA, Repair Station Logbook entry (§ 43.9)
Major Repair Splicing spars, engine case welding, blade shortening Approved Data (STC, AD, 8110-3, Field Approval) IA Holder , Part 145 Repair Station, Manufacturer FAA Form 337 + Logbook (§ 43.9)
Major Alteration Modifying structure, unapproved STC equipment Approved Data (STC, AD, 8110-3, Field Approval) IA Holder , Part 145 Repair Station, Manufacturer FAA Form 337 + Logbook (§ 43.9)
Loading diagram... Approved Data vs. Acceptable Data Hierarchy
2. Anatomy and Execution of FAA Form 337
FAA Form 337 is an official federal document consisting of two pages and eight specific data blocks: FAA FORM 337 DATA BLOCKS
- ┌────────────────────────────────────────┬────────────────────────────────────────┐
- │ Block 1: Aircraft Identity │ Block 2: Owner Information │
- │ (Make, Model, Serial No., Tail N#) │ (Name and mailing address) │
- ├────────────────────────────────────────┴────────────────────────────────────────┤
- │ Block 3: For FAA Use Only (Field Approvals / Special Authorizations) │
- ├────────────────────────────────────────┬────────────────────────────────────────┤
- │ Block 4: Type of Action │ Block 5: Unit Identification │
- │ [X] Major Repair [X] Major Alteration │ (Airframe, Engine, Prop, or Appliance) │
- ├────────────────────────────────────────┴────────────────────────────────────────┤
- │ Block 6: Conformity Statement │
- │ - Certifies that the work was performed in accordance with 14 CFR Part 43 │
- │ - Signed by the person or repair station PERFORMING the work │
- ├─────────────────────────────────────────────────────────────────────────────────┤
- │ Block 7: Approval for Return to Service │
- │ - Certifies that the work is APPROVED for return to service │
- │ - Signed by an IA, Part 145 Repair Station, Manufacturer, or FAA Inspector │
- ├─────────────────────────────────────────────────────────────────────────────────┤
- │ Block 8: Description of Work Accomplished (Page 2) │
- │ - Detailed narrative describing the repair/alteration │
- │ - Explicit citations of APPROVED DATA used │
- │ - Weight and balance revision calculations (if applicable) │
- └─────────────────────────────────────────────────────────────────────────────────┘
- Form 337 Distribution Rules
Standard Rule (2 Copies):
Signed copy: Given to the aircraft owner ; copies for major alterations are kept and transferred with the aircraft under 14 CFR § 91.417(a)(2)(vi).
Second copy: Forwarded to the FAA Aircraft Registration Branch in Oklahoma City within 48 hours after the aircraft is approved for return to service (Appendix B(a)(3)).
Extended-Range Fuel Tank Rule (3 Copies):
When an extended-range fuel tank is installed in the passenger compartment or baggage compartment , the person who performs the work and the person approving it execute Form 337 in at least triplicate.
One copy must be placed on board the aircraft (as specified in § 91.417), one goes to the owner, and one is forwarded to the FAA Aircraft Registration Branch within 48 hours after the work is inspected (Appendix B(d)).
Repair Station Major Repair Exception:
Under 14 CFR Part 43 Appendix B(b), for a major repair made in accordance with a manual or specifications acceptable to the FAA, a certificated repair station may use the customer's work order in place of Form 337: it gives the owner a signed copy of the work order and a signed maintenance release, and retains a duplicate for at least 2 years.
3. FAA Field Approvals and Engineering Authorizations
When a major repair or major alteration does not have pre-existing approved data (such as a manufacturer STC or AD), the technician must obtain engineering approval:
Methods of Securing Approved Data
FAA Field Approval (Block 3): An FAA Aviation Safety Inspector (ASI) inspects the technical data and/or the physical alteration and signs Block 3 of FAA Form 337, conferring approved data status for that specific serial-number aircraft.
Designated Engineering Representative (DER): A DER approves technical engineering data using FAA Form 8110-3 (Statement of Compliance with Airworthiness Standards). The Form 8110-3 serves as approved data to support the Block 8 entry on Form 337.
Organization Designation Authorization (ODA): An ODA issues FAA Form 8100-9 approving major repairs or alterations on behalf of the FAA.