Study guide

2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity

FAA Aviation Mechanic — General AMG

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & AMG Exam Overview

1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam

2 Chapter 2: Maintenance Forms, Records, Publications & Regulations

2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity

3 Chapter 3: Basic Electricity

3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge

4 Chapter 4: Materials & Processes

4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection

5 Chapter 5: Cleaning & Corrosion Control

5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards

6 Chapter 6: Weight & Balance

6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast

7 Chapter 7: Ground Operation, Servicing & Safety

7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention

8 Chapter 8: Aircraft Drawings

8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics

9 Chapter 9: Fluid Lines & Fittings

9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation

10 Chapter 10: Mathematics for Aviation Maintenance

10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions

11 Chapter 11: Physics for Aviation Maintenance

11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices

12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement

12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration

13 Chapter 13: Human Factors in Aviation Maintenance

13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism

2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity

Key Takeaways Explain This Topic AI

FAA Form 8130-3 is the Authorized Release Certificate for a part or appliance, Form 8100-2 is the Standard Airworthiness Certificate that stays with the aircraft, and Form 8010-4 is the Malfunction or Defect Report.

An operator's MEL must be equal to or more restrictive than the type's MMEL, and 14 CFR 91.213(a)(2) states the MEL plus its Letter of Authorization together constitute a supplemental type certificate for that aircraft.

Under 14 CFR 91.213(d) an inoperative item must be removed or deactivated and placarded INOPERATIVE, and any maintenance involved must be performed and recorded under Part 43.

A WARNING signals possible injury or loss of life, a CAUTION signals possible equipment damage, and a NOTE emphasizes essential information; the hierarchy is standardized, not stylistic.

14 CFR 65.21 requires a Part 65 certificate holder to notify the FAA Airman Certification Branch in writing within 30 days of any change in permanent mailing address.

Last updated: August 2026

2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity

Subject AM.I.I of the Airman Certification Standards is the largest regulatory block in the General section — 23 knowledge elements. Sections 2.1 through 2.6 covered the biggest ones. This section closes the remaining elements that prep courses routinely skip: the FAA forms other than the 337 ( AM.I.I.K5 ), manufacturer publications and minimum equipment lists ( K11 ), FAA databases and supplemental type certificates ( K12 ), FAA-approved airworthiness limitations ( K17 ), the legal weight of warnings, cautions and notes ( K18 ), inoperative equipment ( K19 ), discrepancy records and placards ( K20 ), effectivity codes and serial-number effectivity ( K21 , K22 ), and the mechanic's own address-change duty ( K23 ).

1. The FAA Forms Beyond the 337

The ACS names four forms explicitly. You are expected to recognize each one on sight and know what it does.

Form Title What it is for Who executes it

FAA Form 337 Major Repair and Alteration (Airframe, Powerplant, Propeller, or Appliance) Records a major repair or alteration; a copy goes to the FAA within 48 hours of return to service and a copy stays with the aircraft records permanently Person who performed the work; approval signature by an IA, repair station, or manufacturer

FAA Form 8010-4 Malfunction or Defect Report (the "M or D") Reports a failure, malfunction, or defect so the FAA can spot fleet-wide trends and, if warranted, issue an Airworthiness Directive Voluntary for Part 91 mechanics and owners; feeds the FAA Service Difficulty Reporting System

FAA Form 8100-2 Standard Airworthiness Certificate The white certificate displayed in the cabin; it stays with the aircraft , not the owner, and remains effective as long as maintenance and inspections are performed per Parts 21, 43, and 91 Issued by the FAA or a Designated Airworthiness Representative

FAA Form 8130-3 Authorized Release Certificate, Airworthiness Approval Tag The part-level release tag. It certifies that a part or appliance conforms to approved design and is in a condition for safe operation (new, or overhauled/repaired) Repair station, production approval holder, or FAA

Exam trap. Do not confuse Form 8130-3 (a part tag) with Form 8100-2 (an aircraft certificate). Also do not confuse the voluntary Part 91 Malfunction or Defect Report with the mandatory Service Difficulty Report obligations elsewhere in the regulations: a certificated repair station must report a serious failure, malfunction, or defect of an article to the FAA within 96 hours after discovery under 14 CFR § 145.221(a) .

2. Manufacturer Publications and the MMEL/MEL Chain

AM.I.I.K11 lists maintenance manuals, service bulletins, maintenance alerts, and master minimum equipment lists as the manufacturer-publication family. +-------------------------------------------------------------------------+

  • | MMEL -> MEL -> DISPATCH DECISION CHAIN |
  • +-------------------------------------------------------------------------+
  • | |
  • | MMEL (Master Minimum Equipment List) |
  • | • Developed for an aircraft TYPE by the FAA Flight Operations |
  • | Evaluation Board with the manufacturer |
  • | • Generic; covers every configuration of that type |
  • | | |
  • | v operator tailors it to ITS fleet |
  • | MEL (Minimum Equipment List) |
  • | • Specific to ONE operator's registration numbers |
  • | • Must be EQUAL TO or MORE RESTRICTIVE than the MMEL |
  • | • Requires a Letter of Authorization from the responsible |
  • | Flight Standards office; MEL + LOA together act as an STC |
  • | (14 CFR 91.213(a)(2)) |
  • | | |
  • | v |
  • | DISPATCH with the item inoperative, deferred, placarded, and |
  • | entered in the records the flight crew can see (91.213(a)(4)) |
  • +-------------------------------------------------------------------------+

Two limits from § 91.213(b) that show up as distractors: an item may not be placed on an MEL if it is required by the airworthiness requirements the aircraft was certificated under and is essential for safe operation, or if an Airworthiness Directive requires it to be operable (unless the AD says otherwise).

Service bulletins and maintenance alerts. A manufacturer service bulletin — even one stamped Mandatory — is not legally binding on a Part 91 operator unless an AD incorporates it or an operator's operations specifications require it. FAA Maintenance Alerts (the Aviation Maintenance Alerts publication) are advisory trend information built largely from submitted Malfunction or Defect Reports.

3. Inoperative Equipment Without an MEL (§ 91.213(d))

Most general-aviation aircraft have no MEL. Section 91.213(d) is the alternate path, and the mechanic owns two of its steps.

The aircraft must be a rotorcraft, non-turbine-powered airplane, glider, lighter-than-air aircraft, powered parachute, or weight-shift-control aircraft for which no MMEL has been developed — or a small aircraft in those classes for which an MMEL exists but the operator is not using it.

The inoperative item must not be part of the VFR-day type certification equipment, required by the aircraft's equipment list for that kind of operation, required by an AD, or required by any other rule of Part 91.

The inoperative instrument or equipment is either removed — with the cockpit control placarded and the maintenance recorded per Part 43 — or deactivated and placarded "INOPERATIVE."

If deactivation or removal involves maintenance, it must be accomplished and recorded in accordance with Part 43. That is the mechanic's job, and it is why a pilot cannot simply put a sticker on a dead gauge and depart.

A pilot or a certificated mechanic then determines that the inoperative item does not constitute a hazard.

Discrepancy records and placards (AM.I.I.K20) live in this same space: the placard is the visible half of the deferral, and the maintenance record entry is the legal half. One without the other is a violation.

4. Warnings, Cautions, and Notes (AM.I.I.K18)

Maintenance and operating manuals use a three-tier hierarchy that is standardized across the industry. The ACS asks you to know the definitions, and AM.I.I.R4 asks you to manage the risk of ignoring them.

Signal word Definition Consequence of ignoring

WARNING An operating procedure, practice, or condition that, if not correctly followed, could result in personal injury or loss of life Human harm

CAUTION An operating procedure, practice, or condition that, if not correctly followed, could result in damage to or destruction of equipment Equipment harm

NOTE An operating procedure, practice, or condition that is essential to emphasize Neither, but the task may be done wrong

Memory hook: W arning hurts W orkers; C aution costs C ash; a N ote is just N ews. The ordering is not a stylistic choice — mixing them up in a written procedure is itself a finding during an FAA audit.

5. Effectivity: Making Sure the Part Fits This Aircraft

AM.I.I.K21 and K22 cover "usable on" codes and serial-number effectivity — the single most common source of a wrong-part installation.

Usable-on (effectivity) codes appear in the manufacturer's Illustrated Parts Catalog (IPC) as a short alphanumeric tag in a dedicated column, for example A , B , AB , or ALL . A legend at the front of the IPC maps each code to a block of aircraft serial numbers, model variants, or post-service-bulletin configurations.

Serial-number effectivity is established by cross-checking the aircraft or component data plate serial number against the effectivity legend, the Type Certificate Data Sheet, and any applicable service bulletin or STC. Two airframes on the same ramp with consecutive serial numbers can legitimately take different part numbers.

FAA databases (AM.I.I.K12). Type Certificate Data Sheets, Supplemental Type Certificates, ADs, and advisory circulars are published in the FAA Dynamic Regulatory System (DRS) at drs.faa.gov , which consolidated the older Regulatory and Guidance Library. An STC belongs to its holder; installing under someone else's STC requires their written permission, and the STC paperwork becomes part of the aircraft's permanent records.

6. FAA-Approved Airworthiness Limitations (AM.I.I.K17)

The Airworthiness Limitations Section (ALS) is a discrete, FAA-approved part of the Instructions for Continued Airworthiness. It contains mandatory replacement times, structural inspection intervals, and related procedures. Its defining property is that it is not optional and not adjustable by the mechanic or owner — no field approval, no "acceptable data" substitution, no engineering judgment. Compliance is required by § 91.403(c) , and the current status of life-limited parts is one of the permanent records under § 91.417(a)(2) .

7. The Mechanic's Own Paperwork: Change of Address (AM.I.I.K23)

14 CFR § 65.21 is short and gets tested precisely because it is easy to forget:

Within 30 days after any change in the permanent mailing address, the holder of a certificate issued under Part 65 shall notify the FAA Airman Certification Branch in Oklahoma City, in writing , of the new address.

The clock runs from the change of address, not from the date you notice it, and the notification must be in writing to the Airman Certification Branch — not to the local Flight Standards office, not to your employer.

Loading diagram... Deferring an Inoperative Item: MEL Path vs. § 91.213(d) Path