Study guide
2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11)
FAA Aviation Mechanic — General AMG
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & AMG Exam Overview
1.1 About the FAA Aviation Mechanic General Knowledge Test 1.2 How to Study for the AMG Exam
2 Chapter 2: Maintenance Forms, Records, Publications & Regulations
2.1 14 CFR Parts 43, 65, and 91 Regulatory Framework 2.2 Aviation Mechanic Privileges, Limitations & Recent Experience 2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11) 2.4 FAA Form 337 Major Repairs and Major Alterations 2.5 Airworthiness Directives (ADs) & Mandatory Compliance 2.6 Type Certificate Data Sheets (TCDS), STCs, ACs & Maintenance Manuals 2.7 FAA Forms, MMEL/MEL, Inoperative Equipment & Parts Effectivity
3 Chapter 3: Basic Electricity
3.1 DC Electrical Circuits, Ohm's Law & Power 3.2 AC Electrical Fundamentals, Reactance & Impedance 3.3 Aircraft Lead-Acid & Nickel-Cadmium Storage Batteries 3.4 DC Generators, Alternators & Electric Motors 3.5 Aircraft Wiring, Bonding & Circuit Protection Devices 3.6 Resistor Color Codes, Semiconductors, Digital Logic & Electrostatic Discharge
4 Chapter 4: Materials & Processes
4.1 Aircraft Ferrous and Nonferrous Metals & Heat Treatment 4.2 Metal Hardness Testing (Rockwell, Brinell, Vickers) 4.3 Nondestructive Testing (NDT/NDI) Inspection Methods 4.4 Aircraft Hardware, Fasteners & Safetying Methods 4.5 Composite Materials, Plastics & Control Cables 4.6 Soldering, Welding & Weld Quality Inspection
5 Chapter 5: Cleaning & Corrosion Control
5.1 Corrosion Types, Chemistry & Identification 5.2 Corrosion Removal, Chemical Conversion Coatings & Surface Treatments 5.3 Aircraft Cleaning Agents, Precautions & Preventative Maintenance 5.4 Aircraft Finishing Systems, Registration Markings & Placards
6 Chapter 6: Weight & Balance
6.1 Weight and Balance Terminology, Datum, Arm & Moment Principles 6.2 Aircraft Weighing Procedures, Scale Reactions & Tare Weight 6.3 Center of Gravity Computations, Extreme Loading & Ballast
7 Chapter 7: Ground Operation, Servicing & Safety
7.1 Engine Starting Procedures, Danger Areas & Ground Taxi Safety 7.2 Aircraft Servicing (Oxygen, Hydraulic, Pneumatic & De-Icing Fluids) 7.3 Aircraft Fueling Safety, Static Grounding & Hangar Fire Protection 7.4 Airport Movement Areas, Hazardous Materials, Tool Control & FOD Prevention
8 Chapter 8: Aircraft Drawings
8.1 Aircraft Drawing Types, Title Blocks & Orthographic Projections 8.2 Line Conventions, Dimensions, Tolerances & Material Symbols 8.3 Electrical Wiring Diagrams, Logic Flowcharts & Fluid Schematics
9 Chapter 9: Fluid Lines & Fittings
9.1 Rigid Metal Tubing Fabrication, Bending & 37° AN Flaring 9.2 Flexible Hose Construction, Pressure Ratings & Lay Lines 9.3 AN/MS/Quick-Disconnect Fittings, Identification & Installation
10 Chapter 10: Mathematics for Aviation Maintenance
10.1 Fractions, Decimals, Percentages & Ratio/Proportion 10.2 Geometric Computations (Area, Volume & Cylinder Displacement) 10.3 Algebraic Equations, Powers, Roots & Maintenance Conversions
11 Chapter 11: Physics for Aviation Maintenance
11.1 Matter, Mass, Weight, Density & Specific Gravity 11.2 Work, Energy, Power & Simple Machines (Mechanical Advantage) 11.3 Fluid Mechanics, Pascal's Law & Bernoulli's Principle 11.4 Thermodynamics, Heat Transfer, Gas Laws, Sound & Aerodynamics 11.5 Standard Atmosphere, Density & Pressure Altitude, Flight Controls & Aerodynamic Devices
12 Chapter 12: Inspection Concepts, Techniques & Precision Measurement
12.1 Aircraft Inspection Programs & Inspection Concepts 12.2 Precision Measuring Tools & Tool Calibration
13 Chapter 13: Human Factors in Aviation Maintenance
13.1 Human Error, the Dirty Dozen & Maintenance Safety Culture 13.2 Human Performance, Limitations, Fatigue & the Work Environment 13.3 Communication, Shift Turnover, Event Investigation & Professionalism
2.3 Maintenance Recordkeeping & Return-to-Service Entries (14 CFR 43.9 & 43.11)
Key Takeaways Explain This Topic AI
14 CFR § 43.9 mandates that every maintenance or alteration record entry contain four critical elements: description of work (or reference to acceptable data), date of completion, name of person performing (if other than approver), and signature, certificate number, and kind of certificate of the person approving return to service.
14 CFR § 43.11 governs inspection entries (100-hour, annual, progressive), requiring total time in service, inspection type, date, signature, certificate number, kind of certificate, and specific statutory certification statements.
If an aircraft is found unairworthy during an inspection, the certifying inspector must provide a signed and dated discrepancy list to the aircraft owner per § 43.11(b), while logging only that the aircraft was inspected and found unairworthy in the permanent records.
14 CFR § 91.417 categorizes aircraft records into temporary records (retained for 1 year or until superseded) and permanent records (retained indefinitely and transferred with the aircraft upon sale).
Last updated: August 2026
2.3 Maintenance Recordkeeping & Return-to-Service Entries
In aviation maintenance, work is not legally finished until the paperwork is correctly executed. A flawless mechanical repair without a conforming logbook entry leaves the aircraft technically unairworthy. The Federal Aviation Administration enforces rigorous standards for maintenance record entries under 14 CFR § 43.9 (maintenance, preventive maintenance, rebuilding, and alterations) and 14 CFR § 43.11 (inspections).
1. Maintenance Record Entries (§ 43.9)
Each person who maintains, performs preventive maintenance, rebuilds, or alters an aircraft, airframe, engine, propeller, appliance, or component part must make an entry in the maintenance record containing the four essential elements : THE 4 REQUIRED ELEMENTS OF A 14 CFR § 43.9 ENTRY
- ┌────────────────────────────────────────────────────────────────────────┐
- │ 1. DESCRIPTION OF WORK PERFORMED │
- │ - Concise summary of work done or reference to FAA-acceptable data │
- │ - Example: "Removed and replaced left main gear brake lining in │
- │ accordance with Piper PA-28-181 Maintenance Manual, Chapter 32." │
- ├────────────────────────────────────────────────────────────────────────┤
- │ 2. DATE OF COMPLETION │
- │ - Calendar date on which the maintenance work was completed │
- ├────────────────────────────────────────────────────────────────────────┤
- │ 3. NAME OF PERSON PERFORMING WORK │
- │ - Required only if the work was performed by someone other than the │
- │ person approving return to service (e.g., supervised apprentice) │
- ├────────────────────────────────────────────────────────────────────────┤
- │ 4. SIGNATURE, CERTIFICATE NUMBER, & KIND OF CERTIFICATE │
- │ - Signature of the individual approving return to service │
- │ - Certificate number (e.g., 3894721) │
- │ - Kind of certificate held (e.g., "A&P" or "Mechanic: Airframe & │
- │ Powerplant") │
- └────────────────────────────────────────────────────────────────────────┘
Exam Watch Item: Total time in service is NOT a required element for a standard maintenance or repair entry under 14 CFR § 43.9! While recording total time is standard industry practice, § 43.9 strictly requires only: Description of work, Date, Name of person performing (if applicable), and Signature / Certificate Number / Kind of Certificate. In contrast, total time in service IS mandatory for inspection entries under § 43.11 .
Loading diagram... Logbook Entry Decision Matrix: § 43.9 vs § 43.11
2. Inspection Record Entries (§ 43.11)
Inspections conducted under Part 91 (100-hour, annual, progressive) require a specialized entry format under 14 CFR § 43.11. The entry must contain:
Type of inspection and a brief description of the extent of the inspection.
Date of the inspection and aircraft total time in service .
Signature , certificate number , and kind of certificate held by the person approving or disapproving for return to service.
Mandatory Certification Statement (verbatim or standardized equivalent):
Standardized Wording for Airworthy Inspection Release
"I certify that this aircraft has been inspected in accordance with a (insert type: 100-hour / annual) inspection and was determined to be in an airworthy condition."
- Date: August 29, 2026 | Total Time: 2,450.5 Hours
- Signature: John R. Doe | Certificate: A&P 3948572 IA
- Standardized Wording for Unairworthy Inspection Release
If the aircraft is found to be unairworthy, the mechanic or IA must NOT state the aircraft is airworthy. Instead, the certifying person makes the following logbook entry:
"I certify that this aircraft has been inspected in accordance with an (annual / 100-hour) inspection and a list of discrepancies and unairworthy items dated August 29, 2026, has been provided for the aircraft owner or operator."
- Date: August 29, 2026 | Total Time: 2,450.5 Hours
- Signature: Jane M. Smith | Certificate: A&P 4829103 IA
- 3. Discrepancies and Unairworthy Items (§ 43.11(b))
When an inspection reveals unairworthy defects (e.g., cracked spar, leaking fuel cell, overdue AD):
The inspector does NOT write the list of discrepancies into the permanent aircraft logbook where it would permanently mar the aircraft's history.
The inspector must furnish a signed and dated list of discrepancies and unairworthy items directly to the owner/operator .
The owner/operator may then hire any certificated A&P mechanic (or repair station) to rectify individual discrepancy items.
When a discrepancy is corrected, the repairing mechanic makes a standard § 43.9 entry for the specific repair. Once all discrepancies on the list are signed off, the aircraft is restored to airworthy status without requiring a complete re-inspection of the entire aircraft.
4. Record Retention Rules under 14 CFR § 91.417
Section 91.417 separates aircraft maintenance records into two categories with distinct retention schedules:
Temporary Maintenance Records (§ 91.417(a)(1) & (b)(1))
Records of maintenance, preventive maintenance, alterations, 100-hour, annual, and progressive inspections must be retained:
Until the work is repeated or superseded by other work , OR
For 1 year after the work is completed .
Permanent Maintenance Records (§ 91.417(a)(2) & (b)(2))
The following records must be retained permanently and transferred with the aircraft upon sale :
Total time in service of the airframe, each engine, each propeller, and each rotor.
Current status of life-limited parts of each airframe, engine, propeller, rotor, and appliance.
Time since last overhaul of all items installed on the aircraft which are required to be overhauled on a specified time basis.
Current inspection status of the aircraft, including the time since the last inspection required by the inspection program under which the aircraft is maintained.
Current status of applicable Airworthiness Directives (ADs) , including method of compliance, AD number, revision date, and next recurring due date/hours.
Copies of FAA Form 337 for each major repair and major alteration.
Comparative Matrix: Record Retention & Entry Types
- Record Item Regulatory Basis Minimum Retention Period Disposition upon Sale
- Routine 100-Hour Inspection Entry 14 CFR § 43.11 1 Year or until superseded Transferred with aircraft
- Oil Change & Filter Replacement 14 CFR § 43.9 1 Year or until superseded Transferred with aircraft
- Total Time in Service Records 14 CFR § 91.417(a)(2)(i) Permanent Transferred with aircraft
- Life-Limited Parts Status 14 CFR § 91.417(a)(2)(ii) Permanent Transferred with aircraft
- Time Since Overhaul (Engine/Prop) 14 CFR § 91.417(a)(2)(iii) Permanent Transferred with aircraft
- Airworthiness Directive (AD) Log 14 CFR § 91.417(a)(2)(v) Permanent Transferred with aircraft
- FAA Form 337 (Major Alterations) 14 CFR § 91.417(a)(2)(vi) Permanent Transferred with aircraft