Study guide

6.7 Communication, Navigation, Antennas, and Avionics Inspection

FAA A&P Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes

1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition

2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow

2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control

3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics

3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight

4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors

4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment

5 Airframe I: Structures, Flight Controls, and Airframe Inspection

5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions

6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms

6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection

7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems

7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control

8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection

8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness

9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting

9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting

10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers

10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection

11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness

12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps

6.7 Communication, Navigation, Antennas, and Avionics Inspection

Key Takeaways Explain This Topic AI

Communication radios are mostly VHF (118.000-136.975 MHz, 25/8.33 kHz spacing) and HF for long range; the mechanic's job is mounting security, antennas, coax, bonding, and operational checks, not internal radio repair.

Antennas must match the band, be securely mounted and well bonded, sealed against moisture, and fed by intact coaxial cable with correct connectors; poor bonding or chafed coax causes intermittent faults and noise.

Transponders reply to ATC interrogation (Modes A/C/S) and underpin ADS-B Out (required since Jan 1, 2020, in most controlled U.S. airspace); the transponder/altimeter checks are required every 24 calendar months under 14 CFR 91.411/91.413.

Static discharge wicks (static dischargers) bleed off precipitation static to reduce radio noise; ELT testing and battery currency follow strict rules (test only in the first 5 minutes of the hour, monitor 121.5).

Last updated: September 2026

Communication and Navigation Equipment

A mechanic does not repair the inside of avionics boxes (that is for repair stations / certificated avionics technicians), but the Airframe ACS expects you to install, mount, inspect, and operationally check the system as installed.

Communication is dominated by VHF voice radios working in the aviation band 118.000-136.975 MHz with 25 kHz (and increasingly 8.33 kHz ) channel spacing; HF radios provide long-range/oceanic comms, and SATCOM serves transports.

Navigation systems you must recognize:

  • System Purpose
  • VOR VHF Omnidirectional Range — bearing to/from ground stations
  • ILS (localizer + glideslope) Precision approach guidance
  • DME Distance-measuring equipment — slant-range distance
  • GPS / WAAS Satellite position; primary modern navigation
  • ADF / NDB Older low-frequency bearing
  • Radar / radio altimeter Weather radar; height above terrain
  • TCAS / autopilot / flight director Traffic alerting; automatic flight control

The maintenance focus is equipment security, cooling, electrical connections, circuit protection, placards, antenna condition, and an operational (functional) check per the installation data, plus logging the work correctly.

Avionics boxes are typically line-replaceable units (LRUs) mounted in a rack that provides cooling air, alignment, and the connector. The mechanic's tasks are removing/installing the LRU, ensuring adequate cooling (a clogged cooling path overheats and shortens equipment life), checking grounding and shielding of the harness, confirming circuit protection (correct breaker/fuse rating), and performing the operational check the maintenance manual specifies.

Installing new avionics is major work that requires approved data (an STC, a 337, or manufacturer data) and proper weight-and-balance and electrical-load updates — you cannot simply bolt a radio in and sign it off.

Antennas, Coax, Bonding, and Static Wicks

Antennas must be the right type for the band (a VHF blade, a GPS patch, a DME/transponder L-band stub), securely mounted to structure, electrically bonded to a good ground plane, and sealed against moisture. The feed is coaxial cable (coax) with matched connectors (BNC, TNC, N) ; coax must be the correct impedance, routed without sharp bends, protected from chafing , and kept dry. The classic intermittent-avionics culprits are poor bonding, a chafed or pinched coax, a loose/corroded connector, or moisture intrusion — not a faulty radio.

Bonding and grounding tie metal parts together to a common potential, controlling static buildup, lightning current paths, and radio noise . Measure bonding resistance to spec; corrosion under a bond strap raises resistance and creates noise.

Static dischargers (static wicks) on trailing edges bleed off precipitation static (P-static) charge into the air so it does not arc and blanket the radios with noise; they are inspected for security, condition, and count. Antenna installation also requires attention to structural reinforcement, drag/airload, and not blanking other antennas. These small details — bonding, coax routing, sealing — are where most avionics-installation discrepancies actually live.

When terminating coax, the connector must be the matched impedance (usually 50 ohms for aviation comm/nav) and assembled so the center conductor and shield are clean, tight, and not shorted; a sloppy connector raises VSWR (voltage standing-wave ratio) and cuts radiated power. Antennas are mounted to reinforced structure with the proper sealant and gasket, oriented per the installation drawing, and located to avoid blanking (one antenna shadowing another) and to keep required separation between transmitting antennas.

After installation the system gets an operational check and, where required, a ground or flight check of accuracy.

Transponders, ADS-B, ELTs, and Avionics Safety

The transponder replies to ATC secondary-radar interrogation: Mode A (4-digit identity code), Mode C (pressure altitude), and Mode S (selective, data-capable). Transponder and altitude-reporting requirements depend on the airspace specified in 14 CFR 91.215 . The transponder test under 91.413 and the altimeter/static/altitude-reporting tests under 91.411 for IFR in controlled airspace each have a 24-calendar-month interval. A passing transponder test does not by itself establish ADS-B Out compliance: a degraded GPS position source can prevent the installation from meeting 91.225/91.227 requirements.

The Emergency Locator Transmitter (ELT) transmits a distress signal (modern units 406 MHz with 121.5 MHz homing). Maintenance rules: inspect/test per 14 CFR 91.207 , replace the battery when half its useful life has expired or after 1 cumulative hour of transmission, and test only during the first 5 minutes of any hour while monitoring 121.5 MHz to avoid false alerts.

Avionics safety is graded:

Electrostatic discharge (ESD): ground yourself and use ESD-safe handling; static can destroy circuit cards invisibly.

RF energy: do not transmit (or run radar) near personnel or fuel; high-power systems and radar emit hazardous radiation.

Live electrical work: de-energize, follow circuit-protection limits, and never substitute a wrong-rated breaker/fuse.

Stay inside your scope — internal repair of TSO'd avionics is a repair-station task.

Aircraft equipped with the optional ADS-B In function in the U.S. are able to receive free FIS-B weather and TIS-B traffic . The position source feeding ADS-B must meet accuracy/integrity standards, so a GPS or antenna fault can knock the aircraft out of compliance even when the transponder itself works. Static dischargers are counted and checked at each inspection because losing them returns the P-static noise they were installed to cure.

A mechanic returning radios or antennas to service confirms the bonding straps and ground plane are clean and tight, since poor grounding is a leading cause of weak transmissions and navigation error. After any work that could affect the static system or transponder, the appropriate 24-month tests under 14 CFR 91.411 and 91.413 must be current before the aircraft flies under IFR or in transponder-required airspace.