Study guide
6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting
Key Takeaways Explain This Topic AI
Hydraulics transmit force through nearly incompressible fluid (Pascal's law: pressure applied to a confined fluid acts equally in all directions), so cleanliness, correct fluid, and seal compatibility are decisive.
The three FAA fluid families do NOT mix: MIL-PRF-5606 mineral-base (red) and MIL-PRF-83282 synthetic hydrocarbon (also red, 5606-compatible) versus Skydrol phosphate-ester (purple) — wrong fluid means drain, flush, and replace seals.
A basic system has a reservoir, pump, filter, pressure regulator/relief valve, accumulator, selector valves, actuators, and a return line; the accumulator stores pressure and dampens pulsations.
High-pressure fluid injection is a serious injury hazard; always relieve system and accumulator pressure before opening any line or component.
Last updated: June 2026
Hydraulic Principles and Components
Hydraulics transmit force through a confined, nearly incompressible liquid. Pascal's law states that pressure applied to a confined fluid is transmitted undiminished and acts equally in all directions; a small force on a small piston can produce a large force on a large piston (mechanical advantage proportional to piston-area ratio). Because the fluid does not compress, motion is firm and precise — ideal for gear, flaps, brakes, and flight-control boost.
A basic open- or closed-center system contains:
- Component Function
- Reservoir Stores fluid, allows expansion and air separation
- Pump Engine-, electric-, or hand-driven; supplies flow (gear, gerotor, vane, or piston type)
- Filter Removes contamination; micron-rated, with a bypass
- Pressure regulator / relief valve Maintains system pressure; relief valve prevents overpressure
- Accumulator Stores pressurized fluid against a gas charge; absorbs pulsations and supplies surge demand
- Selector valves Direct fluid to actuators
- Actuators / motors Convert pressure to linear (cylinder) or rotary (motor) motion
- Check / sequence / shuttle valves Control direction, order, and source selection
The accumulator is precharged with air or nitrogen behind a piston, diaphragm, or bladder; it stores energy and smooths pump pulsations. Always discharge the accumulator before disconnecting lines.
Systems are described by their resting state. An open-center system routes pump output back to the reservoir through the selector valves when nothing is being actuated, so the pump is not constantly building pressure; a closed-center system holds the line at full pressure (kept up by a pressure regulator/unloading valve or a variable-displacement pump) ready for instant response, which is why transports use closed-center systems for flight controls and gear.
Lines are rigid tubing (aluminum or stainless, sized by outside diameter in 1/16-inch increments) joined by flared (AN/MS) or flareless fittings, plus flexible hose where motion or vibration occurs. Color-coded tape and the MIL-STD-1247 symbol/decal identify fluid lines. Torque flared fittings to value — overtightening cracks the flare and causes the very leak you were trying to stop.
Hydraulic Fluids — The Three Incompatible Families
Fluid selection is a classic ACS trap. There are three families, and they are not interchangeable . Servicing a system with the wrong fluid means you must drain, flush, and replace the seals per the manufacturer.
Fluid Base Color Seal type Notes
MIL-PRF-5606 Mineral (petroleum) Red Synthetic rubber (e.g., Buna-N/nitrile) Long-standing light-aircraft fluid; flammable
MIL-PRF-83282 / 87257 Synthetic hydrocarbon Red Same as 5606 Fire-resistant; compatible with and replaces 5606
Skydrol / Hyjet (phosphate ester) Phosphate ester Purple Butyl / EPM (ethylene-propylene) seals Commercial-transport standard; fire-resistant; attacks 5606 seals and many paints
The critical rule: mineral-base and phosphate-ester fluids and their seals are mutually incompatible. Phosphate-ester (Skydrol) will swell and destroy nitrile seals; mineral fluid will degrade butyl seals. Cross-contamination causes seal failure, leaks, and loss of pressure even when major components are good. Match fluid, seals, and color to the system data plate, keep the fluid scrupulously clean, and never top off from an unmarked container.
The color overlap is the trap candidates miss: both 5606 and 83282 are red , and the two ARE compatible (83282 is the fire-resistant replacement for 5606 and uses the same seals). The hard incompatibility is red-family vs. purple Skydrol. Skydrol also attacks paint and skin — it is alkaline, an eye and skin irritant, and demands gloves and goggles. A vegetable-base fluid (MIL-H-7644, blue, natural-rubber seals) appears in older texts but is essentially obsolete.
Contamination control is graded heavily: hydraulic failures are far more often caused by dirt, water, and air than by worn components. Sample fluid for particulate and water, change filters on schedule, cap open lines immediately, and use only clean dispensing equipment dedicated to one fluid type. A single dirty funnel can ground an aircraft.
Troubleshooting and Hazards
Diagnose by symptom, then walk the system:
Low or no pressure → low fluid, failed pump, stuck-open relief/regulator, internal leak, or air-bound pump.
Slow operation → low pressure, restricted line/filter, internal actuator leak, or worn pump.
External leak → failed seal, loose fitting, cracked line; identify before topping off.
Overheating → continuous relief-valve bypass, restricted return, low fluid, or wrong fluid.
Foaming / aeration / spongy operation → air ingestion at a fitting, low reservoir, or a returning-line geyser.
Pressure cycling rapidly (pump short-cycling) → low accumulator precharge so it cannot absorb demand.
Servicing rules: fill only with the specified fluid to the marked level with actuators in the correct position; replace filters on schedule; perform leak checks at operating pressure; and torque fittings to spec (do not overtighten flared/MS fittings).
Safety is graded heavily. A hydraulic system at 1,500–3,000 psi can inject fluid through skin, causing a serious wound that may look minor — fluid injection is a medical emergency. Before opening any component, shut off the pump, relieve system pressure, discharge the accumulator , and verify zero pressure at a gauge. Treat every line as charged until proven otherwise.