Study guide
6.6 Instrument Systems: Pitot-Static, Gyros, and Displays
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
6.6 Instrument Systems: Pitot-Static, Gyros, and Displays
Key Takeaways Explain This Topic AI
The pitot-static system feeds three instruments: the airspeed indicator uses both pitot (ram) and static pressure, while the altimeter and vertical-speed indicator use static pressure only.
A blocked static port freezes the altimeter at the blockage altitude, stops the VSI, and makes the airspeed read low above that altitude and high below it; an alternate static source typically reads slightly high on altitude and airspeed.
Attitude and heading gyros work on gyroscopic rigidity (they stay fixed while the aircraft moves around them); rate instruments like the turn coordinator work on precession.
Airspeed color markings: white arc = flap range (Vso-Vfe), green arc = normal range (Vs1-Vno), yellow arc = caution range (Vno-Vne), red line = Vne never-exceed; a blue radial marks Vyse on light twins.
Last updated: October 2026
The Pitot-Static System
The pitot-static system supplies air-pressure information to three primary flight instruments. The pitot tube faces the airstream and senses ram (impact) plus static pressure ; the static port(s) , mounted flush where airflow is undisturbed, sense ambient static pressure only.
- Instrument Pressure used Indicates
- Airspeed indicator (ASI) Both pitot and static (measures their difference) Speed through the air
- Altimeter Static only Pressure altitude (set to current barometric pressure)
- Vertical-speed indicator (VSI) Static only (through a calibrated leak) Rate of climb/descent
Because these instruments drive the pilot's airspeed, altitude, and trend information, line integrity and leak checks are safety-critical . The static system is checked for leaks per the manufacturer and, for IFR aircraft, the altimeter/static system test required by 14 CFR 91.411 every 24 calendar months (and the transponder per 91.413 ). The pitot heat anti-ice element is checked because a blocked pitot in icing makes the ASI useless. Never blow into a pitot/static line toward an instrument — you can destroy it.
The altimeter is an aneroid (sealed bellows) instrument that expands as static pressure falls; the pilot sets local barometric pressure in the Kollsman window . The airspeed indicator measures the difference between pitot ram pressure and static pressure with a diaphragm. The VSI senses how fast static pressure changes by comparing case pressure (delayed through a calibrated leak ) with the instantaneous static line, which is why the VSI lags and reads zero when the static port is blocked.
Apply suction/pressure for leak checks only with a calibrated tester, slowly, and always within published rates — abrupt application bends the mechanism.
Blockage Errors and Instrument Markings
Know the blockage behavior :
Blocked pitot ram inlet (drain open): ASI drops toward zero.
Blocked pitot inlet AND drain (trapped pressure): the ASI acts like an altimeter — it reads higher as the aircraft climbs and lower as it descends.
Blocked static port: the altimeter freezes at the blockage altitude, the VSI stops (reads zero), and the ASI reads low above the blockage altitude and high below it.
Alternate static source (vents to the cabin, where pressure is slightly lower): the altimeter and ASI read slightly high .
Airspeed color markings (memorize):
- Marking Range / meaning
- White arc Flap operating range: Vso (stall, landing config) to Vfe (max flap-extended)
- Green arc Normal operating range: Vs1 (clean stall) to Vno (max structural cruising)
- Yellow arc Caution range (smooth air only): Vno to Vne
- Red line Vne — never-exceed speed
- Blue radial Vyse — best single-engine rate-of-climb speed (light twins)
Other markings appear on engine and pressure gauges (green = normal, yellow = caution, red = limit/do-not-exceed). A white radial line across the glass and case (a slippage mark) lets the mechanic confirm the instrument face has not rotated in its case. These markings are applied per approved data and are part of the airworthiness inspection — a missing or wrong arc is a discrepancy.
When an instrument reads wrong, separate an instrument fault from a system fault : a single bad airspeed reading with a normal altimeter points at the pitot side; all three pitot-static instruments misbehaving points at a shared static line or port; a wandering heading points at the gyro or its power, not the compass. This source-isolation habit is exactly what the practical examiner wants to see, because replacing the instrument when the line is at fault wastes parts and leaves the squawk.
Magnetic, Gyroscopic, and Electronic Instruments
The magnetic compass is the only self-contained direction instrument; it has known errors — variation (chart vs. true), deviation (aircraft metal/electrics, recorded on a compass card after a swing), and acceleration/turning errors. It is serviced with compass fluid, kept bubble-free, and swung after major electrical changes.
Gyroscopic instruments rely on two properties:
Rigidity in space — a spinning gyro resists tilting and stays fixed. The attitude indicator (artificial horizon) and heading indicator (directional gyro) use rigidity; the aircraft moves around the rigid gyro.
Precession — a force applied to a spinning gyro is felt 90 degrees later in the direction of rotation. The turn coordinator / turn-and-slip indicator uses precession to show turn rate.
Gyros are powered by vacuum/pressure (attitude, heading) or electricity (turn coordinator) — split sources so one failure does not blank all gyros. Handle mechanical gyros gently ; shock can damage bearings/rotors, and a dropped gyro is removed even if it looks fine. Modern aircraft use electronic displays (EFIS/PFD/MFD, glass cockpit) fed by an air-data computer and an AHRS (attitude-heading reference system using solid-state/laser gyros). Avionics work demands electrostatic-discharge (ESD) precautions — a discharge you cannot feel can destroy a circuit card.
Engine and pressure gauge markings mirror the airspeed logic: a green arc is the normal operating range, a yellow arc is a caution range (time-limited or transient), and a red line/radial is a maximum or minimum limit not to be exceeded. These appear on oil-pressure, oil-temperature, cylinder-head-temperature, EGT, fuel-pressure, tachometer, and manifold-pressure gauges. Markings are applied per the Type Certificate Data Sheet (TCDS) and approved data, not painted by guess.
When a candidate is asked what a yellow arc means on any gauge, the answer is caution range — operate there only briefly and with attention. Treat any intermittent warning/annunciator as a real discrepancy: check wiring, sensors, the annunciator, and system logic before clearing it.