Study guide
6.2 Retraction, Steering, Anti-Skid, and Warning Systems
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
6.2 Retraction, Steering, Anti-Skid, and Warning Systems
Key Takeaways Explain This Topic AI
Retractable gear extends and retracts through a power source (hydraulic, electric, or manual), sequence valves, actuators, and locks; an uplock holds gear up and a downlock (over-center linkage) holds it down for landing loads.
A green light means gear down-and-locked; a red light (or unsafe indication) means in-transit or disagreement; no light with the selector down is itself a discrepancy that must be investigated.
Nose-wheel shimmy is damped by a shimmy damper; shimmy traces to worn torque links, loose/worn bearings, low damper fluid, tire imbalance, or rigging — not to one single cause.
Anti-skid systems sense wheel-speed decay toward a skid and modulate or release brake pressure; they must be functionally checked using the aircraft's published self-test, never assumed working.
Last updated: June 2026
Retraction Systems and Locks
Retractable gear is raised and lowered by a power source — hydraulic (most transports and high-performance singles), electric (a reversible motor driving jackscrews or a gearbox), or manual (hand crank). Hydraulic systems route fluid through a selector valve to gear actuators , with sequence valves that force events to happen in the correct order: doors open, gear extends, doors close (or stay open). Restrictor/orifice check valves slow the gear so it does not slam.
Two locks are critical:
Uplock — holds the gear retracted so it cannot free-fall and so air loads cannot force it down.
Downlock — holds the gear extended for landing loads. It is commonly an over-center linkage (a drag/side brace that locks past center so loads cannot collapse it) backed by a downlock spring.
Every retractable system has an emergency extension method — gravity free-fall with the locks released, a hand pump, a blow-down nitrogen bottle, or a manual crank. Troubleshooting a gear that will not retract or extend follows the chain: power source → selector → sequence valves → actuators → locks → doors → switches → indication → mechanical rigging. Always put the aircraft on jacks before a retraction (swing) check.
During a swing check , watch the sequence and timing : doors and gear must move in the right order and within the time band in the manual, locks must engage with the proper rigging dimensions , and the indication must agree with the actual position at every step. A gear that extends but shows no down-and-locked light may have a perfectly good actuator and a mis-rigged or failed downlock switch — proving why you verify the mechanical position, not just the light. Hydraulic creep, a sluggish actuator, or a weak downlock spring all show up on a careful swing check that a quick functional test would miss.
Gear Position and Warning Systems
Gear indication tells the crew the gear's true position, and the warning system alerts them to an unsafe configuration. Standard light logic:
- Indication Meaning
- Green light(s) Gear down and locked
- Red light (or barber-pole/in-transit) Gear unlocked, in transit, or in disagreement with selector
- No light Could mean up-and-locked (normal in flight) or a failed bulb/circuit — verify by press-to-test
A separate aural warning horn sounds if the throttle is retarded toward idle (low power, approach configuration) with the gear not down-and-locked. Because these are safety systems , an intermittent or false indication is a real discrepancy — chase the wiring, the gear-position (squat/proximity) switches , the squat switch (weight-on-wheels) sensor , bulbs, and the annunciator logic before signing it off. Never dismiss a flickering gear light.
The squat switch (weight-on-wheels, WOW, switch) on the gear strut tells the aircraft whether it is on the ground or in the air, and it gates many systems beyond the gear horn: it can disable gear retraction on the ground (so you cannot raise the gear while parked), arm ground spoilers, and enable/disable other ground-only functions. A misadjusted or failed squat switch therefore produces confusing, multi-system symptoms. When indication and warning faults appear, confirm the squat switch rigging and condition early.
Bulbs are checked by press-to-test , and a dual-filament or dimming circuit is verified so a burned-out lamp is not mistaken for an unsafe gear.
Steering, Shimmy, and Anti-Skid
Nose-wheel steering is by direct linkage and rudder pedals on light aircraft, or by a hydraulic steering actuator (often through a steering metering valve and follow-up linkage) on larger aircraft, supplemented by differential braking and a free-castering capability for tight turns.
Shimmy is a rapid lateral oscillation of the nose wheel. A shimmy damper (a small hydraulic snubber or piston/vane unit) suppresses it. When shimmy appears, do not blame one item — inspect the chain: worn or loose torque links (scissors) , worn wheel bearings , low or empty shimmy-damper fluid , tire imbalance or wear, loose attach hardware, and incorrect alignment/rigging .
Anti-skid (anti-lock) systems shorten stopping distance on wet, icy, or contaminated runways. A wheel-speed sensor on each wheel feeds a control box; when the box senses a wheel decelerating toward a skid (wheel speed dropping far below aircraft speed), it commands the anti-skid control valve to release or modulate brake pressure to that wheel, then reapply as the wheel spins back up. Functions include touchdown protection (no braking until wheels spin up) and locked-wheel protection . The system must be verified using the aircraft's built-in self-test ; do not assume an anti-skid system is serviceable.
Anti-skid components a mechanic inspects include the wheel-speed transducers (and their wiring), the anti-skid control box/computer , the control (servo) valves , and the caution/inop annunciation . A common pitfall is that anti-skid is often automatically armed only above a certain ground speed and inhibited below it , so a failed self-test may be normal logic rather than a fault — read the manual before condemning a unit.
Steering systems are likewise rigged to limits: a steering metering valve and follow-up linkage make actual nose-wheel angle track the pedal/tiller input, and incorrect rigging produces over- or under-steering. Whenever a steering, anti-skid, or warning fault appears, identify whether the cause is electrical, hydraulic, or mechanical before swapping parts, because all three can mimic each other.