Study guide
5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
Key Takeaways Explain This Topic AI
Annual and 100-hour inspections have the SAME scope and detail (14 CFR Part 43 Appendix D); the difference is who signs (for an individual mechanic, an annual needs an IA; a 100-hour can be done by an appropriately rated A&P) and the trigger (12 calendar months vs 100 hours in service when 91.409(b) applies, subject to 91.409(c) exceptions).
A 100-hour limit may be exceeded by up to 10 hours only to reach a place where the inspection can be done, and the overflown time is counted against the next 100 hours.
An aircraft is approved or disapproved after a required inspection with a logbook entry per 14 CFR 43.11; if it is unairworthy, the person who performed the inspection (an A&P for a 100-hour, an IA for an annual) still makes the entry and gives the owner a signed and dated list of discrepancies.
Airworthiness Directives (ADs, 14 CFR Part 39) are mandatory; the owner's AD status record (14 CFR 91.417) shows, for each AD, the method of compliance, the AD number and revision date, and, if recurring, the time and date when the next action is required.
Corrosion must be classified by type (surface, pitting, intergranular, exfoliation, galvanic, filiform, stress, fretting) and severity, then removed/treated within approved limits and re-protected, with reinspection if it exceeds limits.
Last updated: October 2026
Annual vs 100-Hour: Same Scope, Different Signature
The required inspections live in 14 CFR 91.409 and their content in 14 CFR Part 43, Appendix D ('Scope and Detail of Items to be Included in Annual and 100-Hour Inspections'). A frequent exam trap: the scope and detail are identical for both — the differences are who can sign and what triggers them:
Annual 100-hour
Trigger Every 12 calendar months Every 100 hours time in service for carrying non-crewmembers for hire, or paid flight instruction in an aircraft supplied by the person giving the instruction, subject to 91.409(c) exceptions
Who signs For an individual mechanic, an A&P with Inspection Authorization (IA) An appropriately rated A&P mechanic (no IA needed)
Scope Part 43 App. D Same Part 43 App. D
An annual satisfies a 100-hour , but a 100-hour does not satisfy an annual unless a person authorized to perform annuals did it and entered it as an annual. The 100-hour limit may be exceeded by up to 10 hours , but only while en route to a place where the inspection can be performed, and the excess time is subtracted from the next 100-hour interval . Before the inspection, App. D requires the aircraft be cleaned and opened (panels, cowling, fairings) so the structure and systems can actually be seen.
Records and Return to Service
Inspection is not finished until it is recorded . 14 CFR 43.11 specifies the entry for a required inspection: aircraft total time in service, the inspection type and extent, the date, the signature, certificate number, and kind of certificate, and a statement that the aircraft was found airworthy (or a reference to the discrepancy list if not). 14 CFR 43.9 covers ordinary maintenance, preventive maintenance, and alteration entries (description of work, date, signature, certificate number, and kind of certificate). Major repairs/alterations also require FAA Form 337 , in addition to that entry.
Key return-to-service logic for the test:
If a required inspection finds the aircraft unairworthy , the inspector does not approve it for return to service. The person who performed the inspection (an A&P for a 100-hour, an IA for an annual) still makes the 43.11 entry and gives the owner a signed and dated list of discrepancies ; any appropriately rated mechanic or repair station can then correct them (items allowed to stay inoperative under 91.213(d)(2) are placarded "Inoperative" and added to the list).
Only the holder of the appropriate certificate (A&P, IA, or repair station) may approve for return to service after the work for which they are rated.
Maintenance records are part of airworthiness — they prove what was inspected, what was found, what data was used, and that the aircraft may fly. Missing or false records can make an otherwise-good aircraft unairworthy.
Airworthiness Directives and Required Inspections
Airworthiness Directives (ADs) are issued under 14 CFR Part 39 to correct an unsafe condition; compliance is mandatory and is a condition of airworthiness. Before signing any inspection the technician must research applicable ADs (airframe, engine, propeller, and appliance) and any Service Bulletins the operator is required to follow. The owner's AD status record ( 14 CFR 91.417 ) must show, for each applicable AD, the method of compliance and the AD number and revision date , and for a recurring AD the time and date when the next action is required ; noting the date and aircraft time of compliance in the entry is good practice.
The airframe also has required special/structural inspections beyond the basic walkaround: pressurized-cabin inspections, control-system and cable inspections, emergency-equipment and pitot-static (24-month) checks where applicable , and life-limited part tracking. A checklist (manufacturer's or one meeting App. D) protects against missed areas, but it does not replace judgment — when a finding points to hidden damage (e.g., a smoking rivet, oil-canning skin, or a soft spot), the inspection must expand to find the cause, not just note the symptom.
Corrosion: Classify, Limit, Re-protect
Corrosion is one of the most common airframe findings and must be classified before any decision:
- Type Recognition
- Surface (uniform) General dulling/etching of the finish
- Pitting Localized pinholes/cavities (common on aluminum)
- Intergranular Attack along grain boundaries (often from improper heat treat)
- Exfoliation Intergranular corrosion that lifts/flakes layers — serious in extrusions
- Galvanic Two dissimilar metals + moisture (e.g., steel against aluminum)
- Filiform Worm-like lines under paint/film
- Stress / fretting Corrosion combined with sustained stress or vibration/rubbing
The decision sequence: clean and identify , determine the type, location, and severity , then remove corrosion within the approved limit (depth/area limits in the SRM/AMM — material removed reduces thickness, so a depth limit protects strength). After removal, treat and re-protect the surface (chemical conversion coating such as Alodine, primer, paint; sealant in joints).
If corrosion exceeds the allowable limit , it becomes structural damage requiring repair or replacement under approved data, plus possible reinspection intervals if a corrosion-prevention/control program (CPCP) applies. As always, the airworthy answer classifies, measures against approved limits, repairs only within authority, re-protects, and documents — never paints over corrosion to hide it.
Inspection Workflow and a Records Worked Example
A practical airframe inspection follows a repeatable workflow that the ACS expects you to reproduce. Before the inspection, review the aircraft and engine/propeller maintenance records, status of ADs, service bulletins, life-limited parts, and prior discrepancies , and confirm the registration and airworthiness certificate are aboard.
During the inspection, work the checklist that meets Appendix D — fuselage and hull, cabin and cockpit, engine and nacelle, landing gear, wings and empennage, propeller, systems, and a final operational/run-up check — opening the panels and fairings needed to actually see the structure. After , make the return-to-service or discrepancy entry , update AD compliance and next-due tracking, and record any parts and data used.
A records worked example ties it together. Suppose an annual reveals an out-of-limits exfoliation area on a wing-root extrusion and a recurring AD that came due. The IA cannot sign the aircraft airworthy until the corrosion is repaired under approved data and the AD is complied with. The maintenance record is completed under 14 CFR 43.9 , recording the corrosion removal/repair, the data used, and the AD compliance (the AD number and revision date and the method of compliance ); the AD status record then shows the recurring AD's next-due time and date . Once the inspection requirements are met and the aircraft is found airworthy, the IA completes the 43.11 inspection entry with the airworthiness statement.
The lesson the test drives home: the inspection, the corrosion decision, the AD, and the records are one connected airworthiness chain — a perfect physical inspection with incomplete records, or a cleared AD that was never recorded, still leaves the aircraft unairworthy.