Study guide
5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment
Key Takeaways Explain This Topic AI
Solid rivets are coded by AN head (AN470 universal, AN426 100° countersunk) and material (AD = 2117-T4, the most common, marked by a dimple); diameters run in 1/32-inch and lengths in 1/16-inch increments.
Rivet diameter should be about 3× the thickness of the thicker sheet; rivet length = total grip + 1.5D so the formed shop head is about 1.5D wide and 0.5D high.
Edge distance is 2D minimum (2.5D for countersunk); rivet pitch runs 4D–6D (3D absolute minimum, ~8D max) and transverse (gauge) pitch is about 75% of pitch, never less than 2.5D.
A repair must restore the original strength and stiffness without adding stress risers or corrosion traps, using the alloy, temper, and fastener pattern specified by approved data.
Poor drilling, deburring, countersinking, or a tipped/clinched shop head can make an otherwise correct rivet layout unairworthy.
Last updated: June 2026
Reading the Rivet Code
Solid rivets are identified by an AN/MS part number that encodes head style, material, diameter, and length. The first number is the head: AN470 is the universal head (the modern general-purpose head that replaced roundhead AN430 and brazier AN455), and AN426 (or MS20426) is the 100° countersunk (flush) head used where aerodynamic smoothness matters. A letter gives the material/alloy :
- Code Alloy/temper Notes
- A 1100 Soft; nonstructural only
- AD 2117-T4 Most common; head dimple ; drives as-received
- D 2017-T4 'Dimple' raised — stronger; 'D-rivet'
- DD 2024-T4 'Ice-box' rivet; two raised dashes; must be heat-treated then kept cold
- B / M 5056 / Monel 5056 for magnesium (corrosion match); Monel for stainless/steel
In a part number like AN470AD3-5 : 470 = universal head, AD = 2117-T4, 3 = 3/32-inch diameter (diameter is in 1/32-inch steps), and 5 = 5/16-inch length (length is in 1/16-inch steps). The DD (2024-T4) ice-box rivet is too hard to drive as-received; it is solution heat-treated and stored in a freezer to delay age-hardening, then driven within its allowed time.
Rivet Sizing Math
Three rules from AC 43.13-1B drive almost every rivet question:
Diameter: the rivet diameter should be about 3 times the thickness of the thicker sheet being joined. Too small a rivet shears; too large a hole weakens the sheet.
Length: rivet length = total grip (combined sheet thickness) + 1.5D . That extra 1.5 diameters of shank forms the shop head.
Shop head: a properly driven shop (bucked) head is about 1.5D wide and 0.5D high (1/2 the rivet diameter tall). Too flat = over-driven/thin; too tall = under-driven.
Worked example: joining two sheets each 0.040 in (total grip 0.080 in). Diameter ≈ 3 × 0.040 = 0.120 in, so a 1/8-in (4/32) rivet (AN_AD4) fits. Length ≈ grip + 1.5D = 0.080 + 1.5(0.125) = 0.080 + 0.188 = 0.268 in , round up to the next available length (about 1/4 in plus, i.e. a -4 or -5 length). Always pick the next-longer standard length and let the bucking bar form the head.
Layout: Edge Distance, Pitch, and Transverse Pitch
Rivet placement protects the sheet from tearing out and the joint from buckling:
Layout dimension Standard value Limit/note
Edge distance (hole center to edge) 2D minimum (≈2.5D for countersunk) Less than 2D risks pull-/tear-out; more than ~4D invites edge buckling
- Pitch (rivet spacing in a row) 4D to 6D 3D absolute minimum , ~ 8D maximum
- Transverse (gauge) pitch (between rows) ≈75% of pitch never less than 2.5D ; rows usually staggered
Measure edge distance to the center of the hole. For a multi-row repair the rows are typically staggered so the rivet load is spread and the sheet is not weakened along one line. A repair patch must restore the original strength — that usually means matching or exceeding the original number of rivets carried across the break, using the same alloy/temper and gauge (or a one-gauge-thicker doubler if the data allows).
Driving Quality and Knowing the Limit
A correct layout still fails if the work is sloppy. Drill holes perpendicular and to the right size (a #30 drill for a 1/8 rivet, #40 for 3/32). Deburr both sides — burrs hold sheets apart and start cracks. Countersink only when the sheet is thick enough (otherwise use dimpling , since a knife-edge countersink in thin sheet is weaker than the rivet head).
When driving, support the work and keep the gun and bucking bar aligned — a tipped, clinched, or cracked shop head , or a smoking/loose rivet later, means drill it out (drill the manufactured head, not the shank) and replace, often one size larger if the hole is enlarged.
Finally, maintenance judgment includes knowing the boundary of standard practices . AC 43.13-1B is acceptable data for a generic repair only if no manufacturer SRM data applies and the repair is truly minor and standard. Negligible-damage limits, control-surface repairs, pressurized-skin repairs, and anything affecting balance, flutter, or primary load paths must follow the manufacturer's SRM or FAA-approved engineering data (DER 8110-3) . The exam favors the answer that uses approved data, preserves strength and corrosion protection, and stops short of guessing when the repair leaves standard limits.
Special Fasteners and Hole Quality
Beyond solid rivets, the Airframe test covers blind rivets and special fasteners used where you cannot reach both sides or where higher strength is needed. Blind (pop) rivets such as friction-lock and mechanical-lock Cherry types are set from one side and are not permitted in many primary structural or pressurized locations unless the data specifically allows them.
Hi-Loks, lockbolts (Huck), and Jo-bolts carry higher loads than solid rivets and are installed to specified torque or pin break-off; camloc/dzus fasteners are quarter-turn panel fasteners, not structural. Knowing which fastener the data calls out — and not substituting a weaker blind rivet for a structural solid rivet — is a common judgment question.
Hole quality is as important as fastener choice. The hole must be drilled perpendicular with the correct drill for the rivet (a #40 drill for a 3/32 rivet, #30 for 1/8, #21 for 5/32), then deburred on both faces. An oversized, out-of-round, or tipped hole loses clamp-up and bearing area; if a hole is enlarged during rework the repair moves up to the next rivet size so the new rivet fills it.
Countersinking is limited by sheet thickness: when the sheet is thinner than the rivet head depth, you must dimple instead, because a knife-edge countersink leaves almost no material to carry the head. Edge distance, pitch, and transverse pitch are all measured to hole centers , and on a doubler the new rivet pattern must reproduce the strength the original skin carried across the damage.
These layout and hole-quality rules are where most sheet-metal points are won or lost, because a textbook-correct rivet driven into a poor hole is still an unairworthy repair.